PDF report generation fails with v7.01

I have software that generates a PDF report. I upgraded FireFox to v7.01 and I now get an error that the printer is not activated even though I am saving the report to a disc file and not printing it. Any ideas or suggestions are appreciated.

I just received instructions from the TMG software company to uninstall and install the PDF driver they use. This fixed the problem. Apparently upgrading to v7.01 damages the driver but reinstalling it corrects the problem.
Thanks for the advice.
Mike

Similar Messages

Report generation fails with below error

Hi Friends,
This is an extarct from "ccat /var/opt/SUNWsymon/PRM/log/prm.log"
Report generation fails for individual host but succeeds for all hosts.
prmlog September 13, 2010 12:52:14 PM Thread-287: Begin loading files
prmlog September 13, 2010 12:53:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:53:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:54:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:56:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 12:58:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-1: Got trap: 2
prmlog September 13, 2010 12:59:51 PM HandlerThread-2: Got trap: 2
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: scp-2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Call CrScheduledRequestBroker.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: creature-t1000-08: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: sdp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: psp-1-region2: Report request generation failed.
prmlog September 13, 2010 1:00:00 PM Parallel:0: Database Error occurs!
prmlog September 13, 2010 1:00:00 PM Parallel:0: ERROR: relation "detail_temp_host" does not exist
prmlog September 13, 2010 1:00:00 PM Parallel:0: SchedOP: Exception: shissun1: Report request generation failed.
prmlog September 13, 2010 1:00:05 PM Thread-294: Report successfully posted to web server.
prmlog September 13, 2010 1:01:01 PM HandlerThread-0: Got trap: 2
prmlog September 13, 2010 1:03:54 PM HandlerThread-0: Got trap: 2
In /tmp directory I could see database logs directory (/tmp/SunMCDBLogFiles)
Below is an extarct from "db-start-sql.log"
ERROR: table "summ_temp_events" does not exist
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
LOG: autovacuum: processing database "postgres"
LOG: autovacuum: processing database "sunmc"
WARNING: there is already a transaction in progress
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (21)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (26)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (25)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
WARNING: there is already a transaction in progress
ERROR: table "summ_temp_events" does not exist
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (42)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
PL/pgSQL function "sp_get_nonperf_summary_data" line 92 at assignment
ERROR: relation "detail_temp_host" does not exist
CONTEXT: SQL statement "INSERT INTO detail_temp_host (host_id) VALUES (1)"
PL/pgSQL function "get_alarm_data_ids" line 203 at execute statement
Kindly suggest me.. This SUNMC is doing more than killing.
Thanks
Srini

I just received instructions from the TMG software company to uninstall and install the PDF driver they use. This fixed the problem. Apparently upgrading to v7.01 damages the driver but reinstalling it corrects the problem.
Thanks for the advice.
Mike

Report generation toolkit with openoffice

hello all
i would like to know if it is possible to use the report generation toolkit with openoffice instead microsoft office? because i do not have the toolkit already i can't test it and i will only buy it if this is possible...
i ask also because i used another application with word export not long ago what was ending with the error message "windows ole server not found". so the question is if something of the microsoft product line is necessary? i am quite sure that the opening of a produced doc would be possible in openoffice without problems - at least i hope so!
only one thread i found, unfortunately in french : http://forums.ni.com/ni/board/message?board.id=4170&message.id=13060&query.id=139594#M13060
thanks a lot, mischl

Another option to consider is to use the report generation VIs that ship with LV and simply output to a PDF document rather than a hardcopy printer.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Cisco ISE 1.1.1.268 Giving error (Report Generation failed. Cause: Null)

I have this issue and I would be very thankful if someone has the answer for this. When I am trying to access Operation > Report > Catalog > Posture > Posture Detail Assessment & clicking on any posture session detail icon. I am getting following attached errors.
1. Report Generation failed. Cause: Null
2. Cannot execute the statement.
Does anyone knows how to get rid of this error & to get access of posture detail.
Thanks

The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts)

Problems with PDF report generation on WEB application

Hi friends.
I have the following problem.
I heve many reports running on a client/server system. But we decide to move one by one, the menu options of the system to the WEB, using iAS. Most of the reports works just fine, but some of them works wrong.
But I am not talking about the data or something like that, I am talking about the layout format. All of them out a grey rectangle in all the pages of the PDF reports. The report doesn't have any color inside, but when we move the file, to the UNIX server and test it, it is generated not in a white normal report but grey and white colors.
anyone have an idea what is it happend?
thank you folks....
abdel.

hi shivanjali..
the problem may be due to your local system settings..
try this..
open internet explorer.-> click on tools menu-> click on internet options-> select connections tab-> press lan settings-> uncheck the proxy address if you have any and press ok....
now try your web report.. hope it will help your concern..

Error only in PDF report generation not HTML

The same report exports fine in HTML. This only happens when exporting a PDF report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: 26---- Error code:-2147467259 Error code name:failed
The application was developed by our developer team and it is hosted in a Windows Server 2008 R2.
Does someone had the same problem ?
Thank you.

We solved but not so sure about the cause.
It had something to do with character encoding in PDF reports.
Thank you for all that read the question.

Query preview works; report generation fails

I have a report query pulling data from two tables that: works in MS SQL Management Studio with no errors, and when copied and pasted into the Query window in BIRT works with a resulting Preview window as expected. However, the moment I hit View (in HTML or PDF, my two preferred outputs), I get an error message stating that the Report viewer cannot convert:
"Can not convert the value of None to Integer type."
I am sure this refers to the following query code:
,CAST(CASE
WHEN a.Access1 > 1 THEN u.o_name03
WHEN a.Access1 = 0 THEN 'None' END as varchar(10)) as 'Event'
Where I cast the value of field access1 (tinyint) to a varchar in a case statement. However, what I don't understand is that the preview runs and returns the expected text ('None') with no problems.
Why does the report generation itself cause this error - and more importantly, how do I fix it?
By the way, the above code worked, at one time, without the CAST statement (both in Preview and in the report) but I changed the data tables and re-bound the report fields (one-by-one - there are 20 of them.)
Ideas? What am I missing?
Thanks in advance.

Here it is:
Stack Trace:
org.eclipse.birt.report.engine.api.EngineException: A BIRT exception occurred. See next exception for more information.
Can not convert the value of None to Integer type.
at org.eclipse.birt.report.engine.executor.ExecutionContext.addException(ExecutionContext.java:1245)
at org.eclipse.birt.report.engine.executor.ExecutionContext.addException(ExecutionContext.java:1224)
at org.eclipse.birt.report.engine.executor.QueryItemExecutor.executeQuery(QueryItemExecutor.java:96)
at org.eclipse.birt.report.engine.executor.TableItemExecutor.execute(TableItemExecutor.java:62)
at org.eclipse.birt.report.engine.internal.executor.wrap.WrappedReportItemExecutor.execute(WrappedReportItemExecutor.java:46)
at org.eclipse.birt.report.engine.internal.executor.emitter.ReportItemEmitterExecutor.execute(ReportItemEmitterExecutor.java:46)
at org.eclipse.birt.report.engine.internal.executor.dup.SuppressDuplicateItemExecutor.execute(SuppressDuplicateItemExecutor.java:43)
at org.eclipse.birt.report.engine.internal.executor.wrap.WrappedReportItemExecutor.execute(WrappedReportItemExecutor.java:46)
at org.eclipse.birt.report.engine.internal.executor.l18n.LocalizedReportItemExecutor.execute(LocalizedReportItemExecutor.java:34)
at org.eclipse.birt.report.engine.layout.html.HTMLBlockStackingLM.layoutNodes(HTMLBlockStackingLM.java:65)
at org.eclipse.birt.report.engine.layout.html.HTMLPageLM.layout(HTMLPageLM.java:92)
at org.eclipse.birt.report.engine.layout.html.HTMLReportLayoutEngine.layout(HTMLReportLayoutEngine.java:100)
at org.eclipse.birt.report.engine.presentation.ReportDocumentBuilder.build(ReportDocumentBuilder.java:249)
at org.eclipse.birt.report.engine.api.impl.RunTask.doRun(RunTask.java:269)
at org.eclipse.birt.report.engine.api.impl.RunTask.run(RunTask.java:86)
at org.eclipse.birt.report.service.ReportEngineService.runReport(ReportEngineService.java:1325)
at org.eclipse.birt.report.service.BirtViewerReportService.runReport(BirtViewerReportService.java:158)
at org.eclipse.birt.report.service.actionhandler.BirtRunReportActionHandler.__execute(BirtRunReportActionHandler.java:81)
at org.eclipse.birt.report.service.actionhandler.BirtGetPageActionHandler.__checkDocumentExists(BirtGetPageActionHandler.java:58)
at org.eclipse.birt.report.service.actionhandler.AbstractGetPageActionHandler.prepareParameters(AbstractGetPageActionHandler.java:118)
at org.eclipse.birt.report.service.actionhandler.AbstractGetPageActionHandler.__execute(AbstractGetPageActionHandler.java:103)
at org.eclipse.birt.report.service.actionhandler.AbstractBaseActionHandler.execute(AbstractBaseActionHandler.java:90)
at org.eclipse.birt.report.soapengine.processor.AbstractBaseDocumentProcessor.__executeAction(AbstractBaseDocumentProcessor.java:47)
at org.eclipse.birt.report.soapengine.processor.AbstractBaseComponentProcessor.executeAction(AbstractBaseComponentProcessor.java:143)
at org.eclipse.birt.report.soapengine.processor.BirtDocumentProcessor.handleGetPage(BirtDocumentProcessor.java:87)
at sun.reflect.GeneratedMethodAccessor78.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.birt.report.soapengine.processor.AbstractBaseComponentProcessor.process(AbstractBaseComponentProcessor.java:112)
at org.eclipse.birt.report.soapengine.endpoint.BirtSoapBindingImpl.getUpdatedObjects(BirtSoapBindingImpl.java:66)
at sun.reflect.GeneratedMethodAccessor77.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at org.eclipse.birt.report.servlet.BirtSoapMessageDispatcherServlet.doPost(BirtSoapMessageDispatcherServlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:755)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at org.eclipse.birt.report.servlet.BirtSoapMessageDispatcherServlet.service(BirtSoapMessageDispatcherServlet.java:122)
at org.eclipse.equinox.http.registry.internal.ServletManager$ServletWrapper.service(ServletManager.java:180)
at org.eclipse.equinox.http.servlet.internal.ServletRegistration.service(ServletRegistration.java:61)
at org.eclipse.equinox.http.servlet.internal.ProxyServlet.processAlias(ProxyServlet.java:128)
at org.eclipse.equinox.http.servlet.internal.ProxyServlet.service(ProxyServlet.java:60)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at org.eclipse.equinox.http.jetty.internal.HttpServerManager$InternalHttpServiceServlet.service(HttpServerManager.java:360)
at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:684)
at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:503)
at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:229)
at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1086)
at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:429)
at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:193)
at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:1020)
at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:135)
at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:116)
at org.eclipse.jetty.server.Server.handle(Server.java:370)
at org.eclipse.jetty.server.AbstractHttpConnection.handleRequest(AbstractHttpConnection.java:494)
at org.eclipse.jetty.server.AbstractHttpConnection.content(AbstractHttpConnection.java:982)
at org.eclipse.jetty.server.AbstractHttpConnection$RequestHandler.content(AbstractHttpConnection.java:1043)
at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:865)
at org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:235)
at org.eclipse.jetty.server.AsyncHttpConnection.handle(AsyncHttpConnection.java:82)
at org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:696)
at org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:53)
at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:608)
at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:543)
at java.lang.Thread.run(Unknown Source)
Caused by: org.eclipse.birt.data.engine.core.DataException: A BIRT exception occurred. See next exception for more information.
Can not convert the value of None to Integer type.
at org.eclipse.birt.data.engine.core.DataException.wrap(DataException.java:123)
at org.eclipse.birt.data.engine.expression.ExprEvaluateUtil.evaluateExpression(ExprEvaluateUtil.java:88)
at org.eclipse.birt.data.engine.impl.BindingColumnsEvalUtil.evaluateValue(BindingColumnsEvalUtil.java:201)
at org.eclipse.birt.data.engine.impl.BindingColumnsEvalUtil.getColumnsValue(BindingColumnsEvalUtil.java:161)
at org.eclipse.birt.data.engine.impl.ResultIterator.prepareCurrentRow(ResultIterator.java:784)
at org.eclipse.birt.data.engine.impl.ResultIterator.(ResultIterator.java:168)
at org.eclipse.birt.data.engine.impl.QueryResults.getResultIterator(QueryResults.java:222)
at org.eclipse.birt.report.engine.data.dte.QueryResultSet.(QueryResultSet.java:98)
at org.eclipse.birt.report.engine.data.dte.DteDataEngine.doExecuteQuery(DteDataEngine.java:168)
at org.eclipse.birt.report.engine.data.dte.DataGenerationEngine.doExecuteQuery(DataGenerationEngine.java:83)
at org.eclipse.birt.report.engine.data.dte.AbstractDataEngine.execute(AbstractDataEngine.java:275)
at org.eclipse.birt.report.engine.executor.ExecutionContext.executeQuery(ExecutionContext.java:1947)
at org.eclipse.birt.report.engine.executor.QueryItemExecutor.executeQuery(QueryItemExecutor.java:80)
... 71 more
Caused by: org.eclipse.birt.core.exception.CoreException: Can not convert the value of None to Integer type.
at org.eclipse.birt.core.data.DataTypeUtil.toInteger(DataTypeUtil.java:276)
at org.eclipse.birt.core.data.DataTypeUtil.convert(DataTypeUtil.java:104)
at org.eclipse.birt.data.engine.expression.ExprEvaluateUtil.evaluateExpression(ExprEvaluateUtil.java:84)
... 82 more

Report Generation Fails

I having trouble with ARD 3.1 generating reports. I select a remote computer to run a report on and then it queues. The report than hangs in the process of generating. In activity monitor ARD shoots up to 145% use of CPU when the report tries to generate. the ARD Agent then goes to "Not Responding". Also several times ARD has completely crashed when attempting reports. No firewalls are running and the test computer I'm trying to reach is on the same subnet. Any ideas?
MacBookPro Core2Duo Mac OS X (10.4.8)

I have been having problems generating reports.
Constant messing around, trying, failing, changing prefs etc. has fixed the problem almost 100%. This using ARD 3.1 on machines on the LAN (Airport) and via the internet.
However ... there is a single report (Application Usage) on one machine, via the internet, which I can see being 'Collected' via the Task progress, but it crashes ARD 3.1 instantly every time when it starts to transfer to my Admin machine.
This leads me to suspect that the Report Generation problems have more to do with Cache issues, than anything else. (Rebuilding the report doesn't help).
Does anyone have any specific info on what and where ARD 3.1 keeps its caches?
AluBook 17 Mac OS X (10.4.8)

PDF reports generation problem from single oracle reports in 10G

Hi All,
i am generating 4 PDF reports from one Oracle reports in 10 G.
i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
some time it generates but some time it generate 2 or 3 out of 4.
Can you anyone help me on this issue.
Regards,
Abhishek
Code that i used for generation of report:
on key-F0:
DECLARE
PL_ID PARAMLIST;
PL_NAME VARCHAR2(10) := 'REP';
USRNM VARCHAR2(50);
pl_id2 paramlist;
pl_name2 varchar2(10):= 'REP';
usrnm2 varchar2(50);
pl_id3 paramlist;
pl_name3 varchar2(10):= 'REP';
usrnm3 varchar2(50);
pl_id4 paramlist;
pl_name4 varchar2(10):= 'REP';
usrnm4 varchar2(50);
BEGIN
USRNM := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID := GET_PARAMETER_LIST(PL_NAME);
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST(PL_NAME);
IF ID_NULL(PL_ID) THEN
MESSAGE('Error Creating Parameter List ');
END IF;
ADD_PARAMETER(PL_ID, 'P_PRNT_C_FAM_ID', TEXT_PARAMETER, :PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID, 'P_NOTICE_DATE', TEXT_PARAMETER, TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID, 'P_REDET_DATE', TEXT_PARAMETER, TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID, 'USR_NM', TEXT_PARAMETER, USRNM);
ADD_PARAMETER(PL_ID, 'SCHEDULE', TEXT_PARAMETER, :RUN_TIME);
ADD_PARAMETER(PL_ID,'P_PRNT_PROV',TEXT_PARAMETER,'PRNT');
ADD_PARAMETER(PL_ID, 'P_ENG_SP', TEXT_PARAMETER,'N');
REDET_REPORT('506',PL_ID,'CT506_Parent_FamId_Eng'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
USRNM2 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID2 := GET_PARAMETER_LIST(PL_NAME2);
IF NOT ID_NULL(PL_ID2) THEN
DESTROY_PARAMETER_LIST(PL_ID2);
END IF;
PL_ID2 := CREATE_PARAMETER_LIST(PL_NAME2);
IF ID_NULL(PL_ID2) THEN
MESSAGE('Error Creating Parameter List');
END IF;
ADD_PARAMETER(PL_ID2,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID2,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID2,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID2,'USR_NM',TEXT_PARAMETER,USRNM2);
ADD_PARAMETER(PL_ID2,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
ADD_PARAMETER(PL_ID2,'P_PRNT_PROV',TEXT_PARAMETER,'PRNT');
ADD_PARAMETER(PL_ID2,'P_ENG_SP',TEXT_PARAMETER,'Y');
REDET_REPORT('506',PL_ID2,'CT506_Parent_FamId_Sp'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
USRNM3 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID3 := GET_PARAMETER_LIST(PL_NAME3);
IF NOT ID_NULL(PL_ID3) THEN
DESTROY_PARAMETER_LIST(PL_ID3);
END IF;
PL_ID3 := CREATE_PARAMETER_LIST(PL_NAME3);
IF ID_NULL(PL_ID3) THEN
MESSAGE('Error Creating Parameter List');
END IF;
ADD_PARAMETER(PL_ID3,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID3,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID3,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID3,'USR_NM',TEXT_PARAMETER,USRNM3);
ADD_PARAMETER(PL_ID3,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
ADD_PARAMETER(PL_ID3,'P_PRNT_PROV',TEXT_PARAMETER,'PROV');
ADD_PARAMETER(PL_ID3,'P_ENG_SP',TEXT_PARAMETER,'N');
REDET_REPORT('506',PL_ID3,'CT506_Prov_ProvId_Eng'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
USRNM4 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID4 := GET_PARAMETER_LIST(PL_NAME4);
IF NOT ID_NULL(PL_ID4) THEN
DESTROY_PARAMETER_LIST(PL_ID4);
END IF;
PL_ID4 := CREATE_PARAMETER_LIST(PL_NAME4);
IF ID_NULL(PL_ID4) THEN
MESSAGE('Error Creating Parameter List');
END IF;
ADD_PARAMETER(PL_ID4,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID4,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID4,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID4,'USR_NM',TEXT_PARAMETER,USRNM4);
ADD_PARAMETER(PL_ID4,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
ADD_PARAMETER(PL_ID4,'P_PRNT_PROV',TEXT_PARAMETER,'PROV');
ADD_PARAMETER(PL_ID4,'P_ENG_SP',TEXT_PARAMETER,'Y');
REDET_REPORT('506',PL_ID4,'CT506_Prov_ProvId_Sp'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
Message('Notice Submitted For Printing');
EXIT_FORM;
END;
Program unit:
PROCEDURE REDET_REPORT(rep_name in Varchar2,plist in ParamList,rep_pdf_name in Varchar2)IS
filecode varchar(2);
Repnm varchar(30);
report_id REPORT_OBJECT;
report_id_hear REPORT_OBJECT;
report_prop VARCHAR2(20);
v_rep VARCHAR2(100);
rep_status VARCHAR2(200);
bat_loc varchar2(200);
time_slot varchar2(100);
rep_folder_name varchar2(100):='Redet Notice for Packets Sent\';
BEGIN
Filecode := init.GetFileNmCode;
if filecode 'FL' then
if upper(substr(rep_name,1,2)) ='CC' then
RepNm := filecode||substr(rep_name,3);
else
if rep_name != 'viewerr' then
RepNm := filecode||rep_name;
else
RepNm := rep_name;
end if;
end if;
end if;
Begin
begin
report_id := find_report_object(RepNm);
if error_code = '41219' then
Message('Unable to execute : '|| RepNm);
Raise FORM_TRIGGER_FAILURE;
end if;
end;
set_report_object_property(report_id, REPORT_FILENAME, RepNm);
set_report_object_property(report_id, REPORT_SERVER, init.Appl_Repserver);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE,SYNCHRONOUS);
set_report_object_property(report_id, REPORT_DESFORMAT,'PDF');
select rprm_param_val||rep_folder_name||rep_pdf_name||'.pdf' into bat_loc from rprm where rprm_param_name = 'BAT_LOC';
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(REPORT_ID,REPORT_DESNAME,'"'||bat_loc||'"');
begin
v_rep := RUN_REPORT_OBJECT(report_id,plist);
exception when others then
Message('Error While executing running reports ::'||error_code);
end;
end;
END;

Thanx Frank
Well one solution is that i can decrease the length of my report name and the problem does not occur than.
any ways thanx ..but where to get the patch from.
Kindly provide me with the link if possible.
Thanx,
Qaiser Qayyum Malik.
[email protected]

Report printing failed with "Servlet error: An exception occurred. "

Hi,
I use Apex 3.1 in Oracle Express edition develop few applications. In one of the application, when I enable report printing in stardard reports and try to print to PDF/Excel, the servlet error occur.
I had configured FOP in my server and I can download PDF in "interative report", but for stardard report, the report printing failed.
I can successfully print the reports in my others applications. Anyone know what could be the reason which cause an application failed to print the report.
Thanks
Vincent

Does your application name have special characters? I heard that the app name has to be just letters and numbers for this to work...actually testing right now.

Report generation issue with a hut

Hi,
I hav an issue using report generation my report is using huts and I i'm writting true or false value in excel case, which is linked with the hut but writting the value in the linked case does not change the hut value.
Thanks
Olivier

Hi Olivier,
I was wondering if you could expand on what the overall goal for your application is. Also I am not familiar with huts, could you explain what these are?
Eric A.
National Instruments
Distributed I/O Product Support Engineer

Report Generation Toolkit with Excel 2003 and Excel 2000

Hello,
I'm using the Report Generation Toolkit to generate an Excel report from an Excel template.
The "NI_Excel.lvclass" is included in the "source" section of the application builder options.
I create an exe file on a PC where Excel 2003 is installed. On a Notebook, where only Excel 2000 is installed, the application crashes at the generation of the report:
I guess the problem is the different version of Excel but I don't know. On the developer PC with Excel 2003 it works fine.
In this document it's only talked about different Word versions.
How can I use the Report Generation Toolkit here?
I'm using it that way:
Regards

Oh, it seems that the Report Generation Toolkit "only" supports Excel XP/2003/2007.
I think, that's the problem.

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

Report generation toolkit with excel 97 Graphing issue

I am trying to set-up mu data output to use the report generation Vis. However I am running into a problem when trying to update 2 graphs on the same sheet in Excel.
My set-up is:
Windows XP
Office 97
LabVIEW 7.1.1 with the Office toolkit installed
I noticed that I can write to the first Graph and update it without issues, but once I try to update the second I get error -41105 stating that MSGraph is not installed.
I did notice that if I set a break point between the Excel Quit Graph.vi and Excel Update Graph.vi if I click the mouse within excel in removes the highlight border from the first graph, the I continue and it works fine. For some reason LabVIEW is not releasing that Graph to be able to select another.
I tried to write data to a cell after quiting the graph and then selecting the second graph but that is not working either although it does work manually.
Next I may try a Macro but I would rather not have to do that.
Any suggestions?
Jeff
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect

Well after some debugging I found it. Apparently for Excel 97 only there is a problem that when you qiut MSGraph it may not save properly so the VI had the Quit Property removed.
I have added it into my code and it seems to work and will see how well it does and if I run into any problems.
Jeff D.
OS: Win 7 Ultimate
LabVIEW Version: 2011,2010,2009 installed
Certified LabVIEW Architect

Dynamic crystal report generation - issues with column headings

Hi All, 
I'm trying to generate a crystal report dynamically based on a "result set" data(Query: select REPORT_ID, REPORT_NAME, REPORT_DESC, RPT_FILE_NAME, LOCATION from IRS_REPORT_DETAILS). I'm able to generate the report run time, But the report is without columns heads. I would like to include the column headings as well. 
I searched the API(RAS) and found that there is a 'add(java.lang.String fieldName, java.lang.String headingText) " method present in "ReportObjectController" using which we can add the headings. 
ReportDefController reportDefController = clientDoc.getReportDefController();
ReportObjectController reportObjectController = reportDefController.getReportObjectController();
reportObjectController.add( "{Table.Field}", "FieldName" );
 
I'm facing problems in using this code. When trying to use this function for my fields(Ex: reportObjectController.add( "{ IRS_REPORT_DETAILS.REPORT_ID}", "Report ID" );) it is giving me the following error: "com.crystaldecisions.sdk.occa.report.lib.ReportSDKGroupException: The field was not found.---- Error code:-2147213310 Error code name:fieldNotFound" 
The following is my dynamic crystal report generation code: 
public ReportClientDocument execute(String repName, String query) {
 ReportClientDocument boReportClientDocument = null;
 try {
 boReportClientDocument = new ReportClientDocument();
 boReportClientDocument.newDocument();
 // Add a table based on the given Resultset to the report.
 dbConnResultSet mySampleResultSet = new dbConnResultSet();
 //mySampleResultSet.execute(query);
 boReportClientDocument.getDatabaseController().addDataSource(
 mySampleResultSet.execute(query));
 IReportSource test = boReportClientDocument.getReportSource();
 // Access all the database fields
 DatabaseController databaseController = boReportClientDocument
 .getDatabaseController();
 IDatabase database = databaseController.getDatabase();
 Tables tables = database.getTables();
 ITable table = (Table) tables.getTable(0);
 int NO_OF_FIELDS = table.getDataFields().size();
 int LEFT_POSITION = 200;
 // Add all the database fields to the report document
 for (int i = 0; i < NO_OF_FIELDS; i++) {
 IField field = table.getDataFields().getField(i);
 FieldObject fieldObject = new FieldObject();
 fieldObject.setFieldValueType(field.getType());
 fieldObject.setDataSource(field.getFormulaForm());
 IReportObject rep = (IReportObject) fieldObject;
 IObjectFormat objformat = rep.getFormat();
 objformat.setEnableCanGrow(true);
 objformat.setHorizontalAlignment(Alignment.from_int(1));
 rep.setFormat(objformat);
 rep.setLeft(LEFT_POSITION);
 rep.setWidth(1000);
 LEFT_POSITION = LEFT_POSITION + 1000 + 50;
 ISection section = boReportClientDocument
 .getReportDefController().getReportDefinition()
 .getDetailArea().getSections().getSection(0);
 //***************** Data being added to the report here, But headings are not added*****************
 boReportClientDocument.getReportDefController()
 .getReportObjectController().add(rep, section, i);
 boReportClientDocument.createReport();
 /*Some report saving code is present down*/
 } catch (ReportSDKException ex) {
 ex.printStackTrace();
 } catch (Exception ex) {
 ex.printStackTrace();
 return boReportClientDocument;
 
appreciate your help.

IField field = table.getDataFields().getField(i);
Here you are getting the first field in the array. This may not be the field you want to add since we aren't sure how the arrays are ordered when retrieving fields from the report. It is better to retrieve the fields with the findObjectByName method, thus ensuring you are retrieving the field you want to add to your heading.

PDF report generation fails with v7.01

Similar Messages

Maybe you are looking for