PDF resolution problem with Pagemaker 7.0

Putting together the school yearbook, I need to create hi res pdfs for the printing company. Certain pictures appear fine when printed from the pagemaker document, but appear very low res when the page is made into a pdf.  Any help would be appreciated.

Without you telling us the exact settings you are using to Distill its hard to say what is wrong.

Similar Messages

  • Resolution problem with pdf presentation from CS4 in Bridge

    I have CS4 and am consistently having problems creating multipage pdf files using Bridge; though they are created using 300 dpi files in Photoshop CS4 the resulting multipage pdfs from Bridge are not print quality. I never had a problem with this before Bridge was required to create pdf presentations. The files used to create the presentation in Bridge are either psd or Photoshop pdf at 300 dpi. I am completely self-taught in Photoshop and my skill level is moderate at best, but I am not finding anything to help me so far in searching google and forums. Does anyone have any info to point me in the right direction? thanks-

    Have you applied all the updates for photoshop cs4 including this one:
    win:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
    mac:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4229

  • Resolution problem with GF4 Ti4200-TD 128MB DDR

    I am having problems when I switch my display resolution to 640x480x32.
    It also affects any application which runs in the affected resolution.
    I tried re-installing the VGA card in its AGP slot and its drivers after removing my previous VGA card and its drivers.
    The driver that i am using for the MSI VGA card, which is 4.13.2890, is already updated via LiveUpdate, which is now 4.1.3.3000
    My system consists of:
      AOpen AX34 Pro Motherboard
      AGP 2X / 4X
      Intel Pentium III 800MHz
      512MB RAM
      Direct X 8.1
      Windows Me
    Looking forward to you reply. Thank you for your help.

    izel,
    Get the latest Via 4in1 Drivers and try running the Card in AGP 2X.  Do not expect much from the Via Apollo Pro 133 Chipset.  Lots of problems with the GART.
    Take Care,
    Richard

  • Xorg nvidia resolution problems with KDE

    I just installed Arch 2008.04-RC last night.  I configured xorg.conf using nvidia with the screen resolution set to "1440x900" which worked in both the X Windows and KDE 3.5.9. 
    I was trying to get xine working with Amarok.  At one point, I deleted ~/.xine and xinirtc to force itself to reset. I then rebooted at which point I noticed the resolution set only at "640x400" in KDE.  I checked the Display Settings and that was the maximum resolution I could choose.  I then switched to the vesa drivers which allowed a maximum resolution of "1024x768". 
    I removed xorg and nvidia and reinstalled.  I can no longer get a resolution of "1440x900" resolution for my Viewsonic VA1926v flat screen monitor.  I read on the xorg log that
    I am using the Nvidia GeForce 7300 GT video graphics card.  uname -r:  2.6.25-ARCH
    From /var/log/Xorg.0.log I get the following information when I am using vesa:
    (II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
    (II) VESA(0): Generic Monitor: Using hsync range of 30.00-82.00 kHz
    (II) VESA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
    (II) VESA(0): Not using mode "1440x900" (no mode of this name)
    (II) VESA(0): Not using mode "1280x1024" (no mode of this name)
    (--) VESA(0): Virtual size is 1024x768 (pitch 1024)
    (**) VESA(0): *Built-in mode "1024x768"
    (**) VESA(0): *Built-in mode "800x600"
    (**) VESA(0): Built-in mode "640x480"
    (**) VESA(0): Built-in mode "640x400"
    (**) VESA(0): Built-in mode "320x400"
    (**) VESA(0): Built-in mode "320x240"
    (**) VESA(0): Built-in mode "320x200"
    (==) VESA(0): DPI set to (96, 96)
    With nvidia, it just states that no mode is available for '1440x900' and selects virtual size of '640x400'.
    My xorg.conf below:
    Section "ServerLayout"
    Identifier "Default Layout"
    screen "Default Screen" 0 0
    Inputdevice "Generic Keyboard"
    Inputdevice "Configured Mouse"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "CorePointer"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ImPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "true"
    EndSection
    Section "Monitor"
    Identifier "Generic Monitor"
    Horizsync 30.0 - 82.0
    Vertrefresh 50.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "nVidia Corporation G70 [GeForce 7300 GT]"
    Driver "vesa"
    Option "AddARGBVisuals" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "NoLogo" "True"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "nVidia Corporation G70 [GeForce 7300 GT]"
    Monitor "Generic Monitor"
    Defaultdepth 24
    Option "AddARGBVisuals" "True"
    Option "NoLogo" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "UseEdidDpi" "false"
    Option "DPI" "96 x 96"
    Option "ConnectedMonitor" "DFP"
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900" "1280x1024" "1024x768" "800x600"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    I am at a loss at trying to fix this one.  Something similar happened when I was running Gentoo on this same desktop back in April.  I also have the same low resolution problem when using Sabayon.
    Any help here would be much appreciated :-)

    I thought these frequencies were a bit low too.  My manual said there were the frequencies.  I checked online and it said the same.  I need to do more research on it.
    I did manage to get my 1440x900 resolution back using the open source nv drivers.  I had to do the same with Gentoo and Linux Mint in the past.  Everytime I used the nvidia drivers, my monitor returns to the 640x400 resolution and I noticed the only way to avoid it was to use nv.  I do not play games online or use Compiz so it does not bother me.
    Thanks.

  • External monitor resolution problems with Mountain Lion

    I have a problem with my external monitor (Samsung LS19B150NS) and Mountain Lion (running on unibody Mac Mini). Each time I reboot OSX the resolution get reset from native 1366 x 768 to something lower. The display is connected via DisplayPort-to-VGA adapter. Some observations:
    - I tried selecting "Best for..." option or "Scaled" (set on 1366 x 768 or 1360 x 768). The problem is still there
    - Sometimes resoltuion might stay alright for several reboots, but then the problem re-appears again
    - Sleep mode doesn't reset resolution
    - Other monitors work fine via the same adapter
    - The Samsung LS19B150NS work perfectly well with other Win PCs
    Any suggestions how to fix it?

    I have a problem with my external monitor (Samsung LS19B150NS) and Mountain Lion (running on unibody Mac Mini). Each time I reboot OSX the resolution get reset from native 1366 x 768 to something lower. The display is connected via DisplayPort-to-VGA adapter. Some observations:
    - I tried selecting "Best for..." option or "Scaled" (set on 1366 x 768 or 1360 x 768). The problem is still there
    - Sometimes resoltuion might stay alright for several reboots, but then the problem re-appears again
    - Sleep mode doesn't reset resolution
    - Other monitors work fine via the same adapter
    - The Samsung LS19B150NS work perfectly well with other Win PCs
    Any suggestions how to fix it?

  • Resolution problems with Acer aspire 5520

    Hello,
    I'm having trouble making both tty and Xorg resolution be native. I have an nVidia 7000M gpu.With nouveau drivers I managed to get KMS working, but realized Xorg resolution is wrong. If I set the right resolution with xrandr the problem with tiling WMs similar to what I explained in this thread. What is different is mouse can go to the blank part and still be visible, floating windows could be placed in the blank area or resized to full screen, but WM won't ever place windows there. Some tiling WMs are able to utilize the full width of the screen. WMs that do not work like this are dwm, wmii and musca.
    Dwm has problems displaying conky in its bar (cuts of a lot of output). This made me think the problem is not the resolution/driver and, dwm being my favourite WM, helped hiding the problem.
    Wmii utilises the whole screen after change of resolution, but leaves an unmovable vertical line where right edge of a window used to be prior to resolution change.
    Musca just works, but could take some getting used to.
    All floating WMs work perfectly.
    Then I tried nVidia closed source drivers, which worked perfectly in Xorg. The problem was no KMS. I installed and enabled uvesafb, but it did not change the maximum tty resolution from 1024x768.
    The WMs I tried:
    dwm
    fluxbox
    i3
    musca
    snapwm
    spectrwmsubtle
    A lot of others I either did not like, or they required some configuration to even start
    What I tried to fix the problem: various xrandr options (with nouveau), various kernel command line options (with nvidia) and what was mentioned in arch wiki about screen xorg configuration. Nothing I did to "/etc/X11/xorg.conf.d/10-screen.conf" had any effect so I just deleted the file to ease switching between nouveau and nvidia.
    As to which driver I intend to use... I don't care as long as it can display everything correctly.
    P.S.
    /etc/modprobe.d/uvesafb.conf has only one lien
    options uvesafb mode_option=1280x800-32 scroll=ywrap
    cat /sys/bus/platform/drivers/uvesafb/uvesafb.0/vbe_modes
    says top resolution is 1024x768.
    EDIT:
    Just now I've tried every tiling WM I could find, and the ones working are echinus, musca and qtile.
    Last edited by bstaletic (2015-05-30 18:11:25)

    Mr.Elendig wrote:https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA
    Didn't work.... Already said I tried it

  • PDF export - problems with displaying tables

    Hi,
    I have nice and neat rtf template with some text and big table. It looks fine, but when I export it to PDF it starts the table from new page, not just below the text, which results in 75% blank page. How can I fix it?

    We are using the PDF Export 8.3.7 version, and are having a similar problem. We have a Word file (.doc) with an embedded graphic. Inside the graphic is a table (the original graphic was created some where else and had text and a table, then an image was made of that which was then embedded as a graphic in the Word document). The problem is that the table does not render corretly - the last row of data is not displayed. Oddly, if in the resulting PDF/A output you highlight the region where the data should be displayed, and copy that to Word/Notepad, the data is there, the issue seems to be in rendering the data to make it visible in the rendered PDF/A output. We see other problems with tables in other files, for example some tables are rotated ninety degrees.
    Will there be a fix to PDFExport anytime soon?
    Thanks,
    Kevin

  • Pdf causes problem with opening files: help, please!

    The operating system on my computer is Windows xp and I use Adobe version 11.0.6.
    I am having a problem that arises when I get a warning message (particularly when opening pdf or xls files): "AcroRd32.exe - Application Error: The exception unknown software exception (Oxc0000409) occurred in the application at location 0x00411e0b". I am then unable to open most files - pdf, xls, Word etc. - until I switch the machine off and then on. I have discussed this problem with Microsoft, who eventually said that it seems to be caused by something related to Acrobat software.
    I should be grateful for advice or help from any participant in this forum.
    Many thanks in advance.
    John Porter

    To test the automount hypothesis, you could create
    a new user with a home directory someplace completely different and NFS-free, like /opt
    useradd -m -d /opt/testuser -s /bin/bash testuser
    passwd testuser
    Then login to CDE as the user.
    It does sound like there's something broken with $HOME/.dt
    cheers

  • PDF Print Problems with OS 10.6.7

    Since installing the most recent OS update 10.6.7 on my Macbook, I have been having trouble printing PDF documents on two printers--a Brother HL-5370 DW and an HP PSC 1600. Black vertical lines print across the page. On another Mac with OS 10.5, PDFs still print fine. In all cases, print preview shows normal print output.

    10.7.7 is causing problems with pdf and printing - please see http://db.tidbits.com/article/12078 for a better explanation. I have the same and can't print to either of our Canon office printers or print to pdfs any longer - but can you contact Apple to advise them they have a problem ... no!

  • Converting Word to pdf. Problem with page breaks

    I have Office 2007 and I am trying to convert a 100 page word document into pdf.  However, the pages are breaking different and I end up with more pages in the pdf document which causes problems with my table of contents and index.  Any advice on how to convert the Word doc exactly into pdf?  Thanks

    Michael's reponse is correct. However, as far as I knew, OFFICE 2007 came with printer metrics turned off, meaning it is not supposed to be sensitive to the printer selection. The setting is buried in the options list for compatibility. If it is turned off and a change in printer does affect the result, it would appear just one more of the many things in OFFICE 2007 that MS messed up. The latest one for me has been helping students with the messed up equation editor when you want to add equation numbers in a "standard" way. One of the MS employees even wrote a workaround macro for that problem.

  • Resolution problem with pdf presentation from CS6 in Bridge.

    I'm having exactly the same problem as this guy but on CS6 http://forums.adobe.com/message/4352008.
    "I am consistently having problems creating multipage pdf files using Bridge; though they are created using 300 dpi files in Photoshop CS6 the resulting multipage pdfs from Bridge are not print quality."
    I couldnt find any updates for Bridge CS6. Can anyone help please?
    If Adobe wants us to use Bridge for generating pdf's it'd better be working correctly
    Thanks

    What are the PDF settings? What system are you using? Which version of Acrobat is on the system?
    Mylenium

  • Resolution Problem With PDFs

    I've been making a VERY large graphic in Fireworks. I then
    paste it into Word and scale it to about 25% of the original size
    (maybe less). It looks really quality in Word, but when I save it
    as a PDF and view it in Adobe Reader, the image looks low
    quality/fuzzy. What can I do about this?

    Abbie+ wrote:
    > I've been making a VERY large graphic in Fireworks. I
    then paste it into Word
    > and scale it to about 25% of the original size (maybe
    less). It looks really
    > quality in Word, but when I save it as a PDF and view it
    in Adobe Reader, the
    > image looks low quality/fuzzy. What can I do about this?
    The dimensions of the image are unrelated to the resolution.
    You
    probably need to increase the PPI of the image. You can do
    that by using
    the Modify > Canvas > Image Size feature. Not that
    Fireworks was
    developed for creating images for the Web rather than print.
    You best
    choice would be to use Illustrator for this kind of work.
    Linda Rathgeber - Adobe Community Expert
    http://www.adobe.com/communities/experts/members/8.html

  • PDF Printing Problem with HP UPD Printer

    Hi,
    in our Company we use the HP UPD Driver PCL5 in Version 5.9.0.18326. The Printermodells are HP LaserJet Pro 400 M401, HP LaserJet Pro 400 Color M451, HP LaserJet Enterprise Flow M830z, HP LaserJet Enterprise 500 MFP M525dn, HP LaserJet Enterprise M630dn, HP LaserJet Enterprise Flow M680z and HP LaserJet Enterprise Flow M880z with newest Firmware.
    If a PDF file is printed using Adobe Reader, it takes a long time until the file is printed on the printer. Partially individual pages are printed in one-minute intervals. But if I use another PDF viewer such as Foxit Reader, PDF documents can be printed at normal speed.
    Other documents, such as Word or Excel files are printed normally. Only PDF documents that are printed with Acrobat Reader or Adobe Acrobat are affected. We use the Acrobat Reader version 11.0.10. With version 11.0.6, the problem also occurs.
    Sometimes it also happens that the PDF document fills up the memory of the printer when it was printed with Adobe Reader. With Foxit Reader this does not happen with the same document.
    Does anyone know this problem and knows what to do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ cups ▹ error_log
    from the hierarchical list on the left side of the Console window. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.

  • PDF Exaprom, problem with multitext in one header

    Problem is,that according to my simply thiking when I connect two elements Append Text HF one by one serialy with some text in header, and in their properties I set alligment both of them at left- MIDDLE in my opinion it suppose to overwrite one text on secand. When I set one text at left-MIDDLE and secont text in center-MIDDLE is should firstly create one text at left side, another at the middle. I doesn't.... When you try to combine with alligment of text,you easly notice,that when it's creating first text at the left side,it devide page on 3 and locate it at 1 collumn, and then when you pass this PDF Report to second Append Text HF this subVI divide not the same lenght of the side, but those 2-3 columnt whose left!!!! In effect text wich suppose to be at center of document is the center of 2-3 parts of document. 
    Do I doing something wrong or is it program bug? 
    Attachments:
    pdf_report_test.vi ‏53 KB
    Report.pdf ‏20 KB

    Now I see,
    I just haven't know about this specyfication of that subvi.
    I managed to deal with that, but unfortanatly I have another problem.
    In help context of create table.vi you can read that in cell can be eiter text or pictures. I want to add 2D array of pictures and it show mistake. Do I ones again don't understand description or I have to do it in other way? I just wanted to create table ona the page,which will contain pictures, let's say 2x2 size table, picture in each cell. Is it possible to using this program? 
    Attachments:
    pdf_report Folder.zip ‏2270 KB
    pdf report.JPG ‏402 KB
    pdf_report Folder.zip ‏2270 KB

  • Resolution problem with Mini DisplayPort to DVI Adapter

    Hi,
    I have a unibody MBP 15', running on 10.5.8. I use 'Mini DisplayPort to DVI Adapter' (http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=Nzk2MDk5OQ) to connect to my external HP LP3065 30' monitor. I get max resolution of 1280 x 800 for external monitor which supports resolution of 2560 by 1600.
    This monitor used to work fine with old MBPs, but not with my unibody MBP. What could be the problem? Adapter or MBP?
    I am missing high resolutions
    Thanks in advance!
    Rohit

    You have the wrong adapter. The one you have is single-link DVI, which does not support 30" displays. You need the Mini DisplayPort to Dual-Link DVI Adapter:
    http://store.apple.com/us/product/MB571Z/A

Maybe you are looking for