Pdf restricting to save from end user

Hi
I am working with filedownload ui element and my client requires that while opening the pdf the end user should not download and save it in their desktop .Please let me know the solution for how to make pdf only in readable mode

Hi,
check this link, it is how to do in java, hope you can use it here but not sure.
http://programming.itags.org/development-tools/55232/
Regards,
SrinivaS

Similar Messages

List of Calculated KFs and Restricted KFs created by end users

Hi all,
Is there one way that I can run a list of all Calcuated KFs and Restricted KFs created by end users in Production. We would like to DELETE all CKFs and RKFs created by end users that are not following the naming convention. So we are looking for a tool to list all CKFs and RKFs created by end users. Can you help?
Thank you
J.

Hi
Table RSZELTDIR will give you the CKF and RKF but will not tell who has created. The user entry you will find in table RSZCOMPDIR.
So first go to second table display result by restricting to user name for which you want to delete the CKF and RKF. Select all the component ID and Put in first table and restrict the selection to CKF and RKF .
thanks
Tripple k

Responce times from end-user point of view

Hi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
Tomasz

Hi,
I am looking for the way how to collect responce times from end-user point of view.
Logging of function execution via DMS is not enogh thus we need to discover and monitor problems in all components including poor network, users terminals etc.
Regards,
Tomasz

Using Reports from End User Console.

I want to show the reports tab and the sub tabs in the end user console.
I have copied the reports folder into the user folder and have modified the "End User Navigation" form , giving the URL of all the jsps.
By this I can see the reports tab in the End user console, but when I click the tab, it redirects to the Admin console login page, and after logging into Admin console login page only I can navigate the other report sub tabs.
Please let me know if there is any way to use the reports from End user console, without the secondary loging (into Admin console).

Do you have to implement whole report TAB or do you want to run only one report.

How do I convert a document as a fillable pdf that will allow the end user to save?

When I convert a Word document into a PDF fillable file, the end user cannot save their file. How to I make the file savable for the end user?

Hi TinaEllis,
Is your end user using Reader to fill out the PDF form? If so, the PDF needs to be Reader enabled. Please see Adobe Acrobat X Pro * Enable Reader users to save form data.
Please let us know if you have additional questions.
Best,
Sara

Restriction of back ground from end user

Hi all, i am ABAPer, but i need to work on authorization issue,
I have to restrict our FI End users (8 users) from the back ground job,
At present scenario is they can run others job also in SM35 including thier job, recently our company aduit found this given the below solution
Excessive batch job authorisation was given to end users (End users should be restricted from the object S_BTCH_ADM and S_BTCH_NAM which allows them to release and schedule jobs using other usersu2019 ID)
when i go thorugh i chenged the value S_BCTH_ADM as N and S_BCTH_NAM as *
and S_BTCH_JOB as LIST,RELE,PROT.
Kindly give me the solution <removed_by_moderator>
Regards
Chandra
Edited by: Julius Bussche on Jun 16, 2008 6:02 AM

> Is there any possiblity to restrict the naming convention of background job ie in the sm36 screen Jobname coloumn if i want to restrect with a particular naming convention is int possible example Z:XYZ is the first part of the job name.
AFAIK you can only restrict this for JOBACTION 'SHOW' and this would only work if your JOBGROUP field was already populated with a value.
The name of the job would not work. So I would say that you need to arrange that organizationally.
I think way back a few years ago there was a thread here about this and the possibility of using the user's ID as the JOBGROUP value - but if I remember correctly it was disbanded as being impractical.
So the answer is most likely: No.
Cheers,
Julius

Accessing Work Items assigned to other users from end user page

Hello Experts,
We are using Sun IDM 6.0 SP1 at our client place. Most of the applications integrated with IDM are manually provisioned, in the sense, once after all the necessary approvals are received the request will be assigned to a group of provisioners, they will manually connect to the requested application and create the account in native system. There are more than 100 such provisioners in the organization.
Current design is to assign a work item to all the provisioners (like Multi approval) and once a provisioner assigns the request to himself then the corresponding work item will be taken out from other provisioners approval queue. These provisioners login to end user page of Sun IDM to access their approval queue as only the end user page is SSO enabled.
Because of the large number of requests in the system (more than 50k) and each request having 100 work items, the number of work items in the system is huge and thus the performance of the system is very poor so we are working to change the design to bring down the number of work items in the system.
Customer is not convinced to have a dedicated person who can get all these work items in his queue and assign it to the appropriate provisioner, they are looking to have a solution something similar to the current one in which all the provisioner can see all the requests in the system and they can pick from it and assign to them.
So we are thinking to create a generic id in the system and assign all the work items to that id, and make changes to the “end user work items list” file so that all the provisioner can see the work items that are assigned to them as well as that generic id.
But for some reason I’m not getting the work items assigned to other users in the end users page. I have tried assigning all the capabilities to logged in user and tried some code changes in “end user work item list” page.
Please share if you have any sample code which can list the work items assigned to other users in end user page. Also please let me know if there is any better alternate to this problem.

Hi,
There is a option to find and get other user's workitems. Please check the attestation and remediation tab. Use the form portion from attestation page and add it in the Work item list form. This will enable to the user to search for another user's workiteams and assign it to him/her manually. (The user needs to be assigned proper admin rights)
To get all the workitems, in the system, you will need to query the repository for all the workitems.... but not sure it will be a good idea in your case as the volume is very high.
Hope it helps
Regards
Arjun

Read query string from End User Menu

In our IdM application, I want to be able to read a variable passed in a query string.
The string is part of the JSP page which takes the user back to the end user menu (user/main.jsp).
Is there a way for the end user menu to read a value from a query string?
Or can user/main.jsp be modified to pass the value from the query string to the end user menu?

can you brief ur requirement?

Transaction codes from end user point of view

hi all,
I am expecting end user transaction codes of warehouse management.
I am familiar with materials management but looking to learn WM.
regards,
nitin patil

Hi refer bellow Tcodes,
WM
0.LI21 - Clear the stock from inventory
1.LB01 - Create Transfer Requirement
2.LB02 - Change transfer requirement
3.LB03 - Display Transfer Requirement
4.LB10 - TRs for Storage Type
5.LB11 - TRs for Material
6.LB12 - TRs and Posting Change for MLEat.Doc.
7.LB13 - TRs for Requirement
8.LD10 - Clear decentralized inventory difference
9.LD11 - Clear differences for decentral.sys.
10.LI01 - Create System Inventory Record
11.LI02 - Change System Inventory Record
12.LI03 - Display System Inventory Record
13.LI04 - Print System Inventory Record
14.LI05 - Inventory History for Storage Bin
15.LI06 - Block Storage types for annual invent.
16.LI11 - Enter Inventory Count
17.LI12 - Change inventory count
18.LI13 - Display Inventory Count
19.LI14 - Start Inventory Recount
20.LI20 - Clear Inventory Differences WM
21.LI21 - Clear Inventory Differences in MM-IM
22.LL01 - Warehouse Activity Monitor
23.LLVS - WM Menu
24.LN01 - Number Ranges for Transfer Requirement
25.LN02 - Number Ranges for Transfer Orders
26.LN03 - Number Ranges for Quants
27.LN04 - Number Ranges for Posting Changes
28.LN05 - Number Ranges for Inventory
29.LN06 - Number Ranges for Reference Number
30.LN08 - Number Range Maintenance: LVS_LENUM
31.LP10 - Direct picking for PO
32.LP11 - WM staging of crate parts WM运
33.LP12 - Staging release order parts (WM-PP)
34.LP21 - WM replenishment for fixed bins WM
35.LP22 - Replenishment Planning for Fixed Bins
36.LQ01 - Transfer Posting in Invent. Mgmt
37.LQ02 - Transfer Posting in Invent. Mgmt
38.LS01 - Create Warehouse Master Record
39.LS02 - Change Warehouse Master Record
40.LS03 - Display Warehouse Master Record
41.LS04 - Display Empty Storage Bins
42.LS05 - Generate Storage Bins
43.LS06 - Block Storage Bins
44.LS07 - Block Quants
45.LS08 - Block Storage Bins per Aisle
46.LS09 - Display Material Data for Storage Type
47.LS11 - Change storage bins (multiple proc.)
48.LS12 - Block Storage type
49.LS22 - Change Quants
50.LS23 - Display Quants
51.LS24 - Display Quants for Material
52.LS25 - Display Quants per Storage Bin
53.LS26 - Stock of Material
54.LS27 - Display Quants for storage unit
55.LS28 - Display storage units / bin
56.LS32 - Change storage unit
57.LS33 - Display storage unit
58.LS41 - List of control cycles for WIP loc
59.LT01 - Create Transfer Order
60.LT02 - Create TO for Inventory Difference
61.LT03 - Create TO from Delivery Note
62.LT04 - Create TO from TR
63.LT05 - Process Posting Change Notice
64.LT06 - Create TO for Material Document
65.LT07 - Create TO for mixed storage unit
66.LT08 - Manual addition to storage unit
67.LT09 - ID point function for storage units
68.LT0A - Pre-plan storage units
69.LT0B - Stock Placement of Shipping Units
70.LT0C - Stock Removal of Shipping Units
71.LT0D - Stock Transfer of Shipping Units
72.LT0E - Create Removal TO for 2-Step Picking
73.LT10 - Create Transfer Order from List
74.LT11 - Confirm Transfer Order Item
75.LT12 - Confirm Transfer Order
76.LT13 - Confirm TO for storage unit
77.LT14 - Confirm preplanned TO item
78.LT15 - Canceling transfer order
79.LT16 - Canceling TO for storage unit
80.LT17 - Single Entry of Actual Data
81.LT1A - Change Transfer Order
82.LT21 - Display Transfer Order
83.LT22 - Display Transfer Order / Storage Type
84.LT23 - Display Transfer Orders by Numbers
85.LT24 - Display Transfer Order / Material
86.LT25 - Display Transfer Order / Reference
87.LT26 - Transfer orders for storage bin
88.LT27 - Transfer order for storage unit
89.LT28 - Display Transfer Order / Reference
90.LT31 - Print TO Manually
91.LT32 - Print transfer order for storageunit
92.LT41 - Prepare TRs for Multiple Processing
93.LT42 - Create TOs by Multiple Processing
94.LT43 - Forming groups for deliveries
95.LT44 - Release for Multiple Processing
96.LT45 - Evaluation of reference numbers
97.LT51 - Maintain Missing Stock
98.LT63 - Control: Single Entry of Actual Data
99.LT64 - Single Entry of Actual Data
100.LT72 - Determine 2-step relevance
101.LT73 - Display 2-step
102.LU01 - Create Posting Change Notice
103.LU02 - Change Posting Change Notice
104.LU03 - Display Posting Change Notice
105.LU04 - Selection of Posting Change Notices
106.LX01 - List of Empty Storage Bins
107.LX02 - Inventory List
108.LX03 - Bin Status Report
109.LX04 - Capacity Used
110.LX05 - Block Bins in Bl.Storage w .Time Limt
111.LX06 - Inventory List for Fire Department
112.LX07 - Check storage
113.LX08 - Accident Regulations List
114.LX09 - Overview of All Transfer Requirements
115.LX10 - Activities per Storage Type
116.LX11 - Overview of Documents
117.LX12 - Document Overview: Landscape Format
118.LX13 - Analysis of Differences
119.LX14 - Analysis of Material Transfers
120.LX15 - Selection of Bins for Annual Inventory
121.LX16 - Selection of Bins for Continuous Inventory
122.LX17 - List of Inventory Differences
123.LX18 - Statistics of Inventory Differences
124.LX19 - Inventory Data Takeover by Batch Inp.
125.LX20 - Generate interim storage bins
126.LX21 - Pick List for Several Transfer Order
127.LX22 - Process Inventory from Overview
128.LX23 - Stock comparison IM - WM
129.LX24 - Display of Hazardous Material numbers
130.LX25 - Inventory Status
131.LX26 - Inventory in WM via cycle counting
132.LX27 - Stock levels by shelf life expiry date
133.LX28 - Relevant TO item for ext.system
134.LX29 - Fixed bin supervision
135.LX30 - Overview of WM messages ext.system
136.LX31 - Analysis of print control tables
137.LX32 - Archived transfer orders
138.LX33 - Archived transfer requirements
139.LX34 - Archived posting change notices
140.LX35 - Archived system inventory records
141.LX36 - Archived inventory histories
142.LX37 - Linked objects
143.LX38 - Check Report Customizing Strategy K
144.LX39 - Evaluation Reference No. for 2-S.Pck
145.LX40 - Material Situation Prod. Storage Bin
146.LX41 - Bin Status Report WM/PP Interface
147.LX42 - Evaluation PP Order from WM View
148.LX43 - Consistency Check for Control Cycles MCL9
WM: Material Plcmt/Removal:Selection
149.MCLD - WM: Material flow - Selection
150.MCLH - WM: Movement types - selection -
151.OL01 - Display / change LDK34 (bins)
152.OL02 - Display / change RLPLA (bins)
153.OL03 - Display / change LDK33 (stock)
154.OL04 - Display / change RLBES (stock)
155.OL05 - Display / change LDK30 (mat.whse)
156.OL06 - Display / change LDK31 (mat.type)
157.OL07 - Data transfer stor.bins LDK34->RLPLA
158.OL08 - Data transfer stor.bins RLPLA->B.I.
159.OL09 - Data transfer stor.bins LDK34->LAGP
160.OL10 - Test storage bin data transfer
161.OL11 - Data transfer stock LDK33->RLBES
162.OL12 - Data transfer stock RLBES-> B.I.
163.OL13 - Data transfer stock LDK33->LQUA
164.OL14 - Test stock data transfer
165.OL15 - Data transfer material whse no.view
166.OL16 - Test mat.master data transfer (MLGN)
167.OL17 - Data transfer material storage type
168.OL18 - Test mat.master data transfer (MLGT)
169.OLVS C SD Menu for Master Data
170.VM01 - Create Hazardous Material
171.VM02 - Change Hazardous Material
172.VM03 - Display Hazardous Material
WM-DWM
Decentralized Warehouse Management
1.DZ00 - Introduction to Decentralized Systems
2.LD01 - Repost Communication Document
3.LD02 - Reposting multiple comm.records
4.LD03 - Display Communication Document
5.LD04 - Evaluation of Communication Doc
6.LD05 - Check LDK01 Records (internal call)
7.LD06 - Check LDK02 Records
8.LD07 - Check LDK03 Records
9.LD08 - Check LDK04 Records (internal call)
10.LD09 - Check LDK05 records
11.LN07 - Number Ranges for WM Communic.Rec.

How can I hide the provisioning tab from end users?

Hi,
Can someone tell me if it's possible to hide the "provisioning tab" within FIM? End users do not need to see this.
I know how to modify RCDCs to hide individual fields, but I'm not sure about entire tabs.
Thanks in advance

http://social.technet.microsoft.com/Forums/en-US/74242380-c8ce-4904-863e-f28ae3605c7e/fim-r2-end-user-portal-customization?forum=ilm2

How to hide detailed exception report on production system from end user

Dear all,
We have developed a Web Dynpro Java application for our client.
Now the client would like to make sure that on their production portal (NetWeaver Portal 7.0), if an end user comes across an application exception (or any other exception for that matter), a custom error message or at least a less detailed error message as the standard "500 internal server error" with all exception details is displayed.
I remember that once upon a time, i stumbled across a setting for this - but I just cannot find it anymore...
Does anyone here know this?
Any help much appreciated!
Thanks and best regards
Patrick

Hello,
For custom error pages you can check [this link|https://cw.sdn.sap.com/cw/community/docupedia/nw70java/blog/2010/03/21/custom-error-messages-in-the-portal]
For less detailed error messages, follow [Note 962319.|https://service.sap.com/sap/support/notes/962319]
Regards,
Laszlo

Event.rc and Restriction of inputs from the User...

Im using Adobe Professional Live cycle designer 7.0 to design pdf form. Also, Im using an existing pdf (supplied by the customer), which is designed through teleform designer (with adobe 6.0) model for this design. In the existing one, the javascript methods are working fine for restricting keys, validation, etc. But these scripts are not working in designer as the designer is using XFA model.
Im trying to restrict the key inputs (like only numbers/characters should be entered). But I couldnt find the equivalent statements for some of the statements (which are used in the teleform pdf).
For eg.
event.rc = true. Allows keystroke to be added to entry. event.rc = false. Prevents keystroke being added to entry in the following function:
function TFTemplate_KeyStroke( mask )
if (event.willCommit) {
return;
var value = AFMergeChange( event );
if (!mask.test( value )) {
event.rc = false;
app.beep( 0 );
But I couldnt find the matching statements in Designer for event.willCommit, AFMergeChange(),event.rc, etc.
If I get, I can restrict the inputs.
Expecting any solutions from you...
Thanks in Advance...

Hi,
Based on your description, I understand that you want to use application or some functional tools and then
monitor the user printer job. When be greater than a certain number, it will need to acquire additional information. As I know, it seems that there is no such function can meet your requirement. Sorry for it.
In addition, I find that you use a third-party software for this functionality before. Please check and confirm
if you can get a new version (or some updates, service package) that may help it to be supported in Windows Server 2012.
Hope this helps.
Best regards,
Justin Gu

Question from end user

Hello
I am running a video editng program that uses Java for its media logger. On previous installs everything worked fine.
Now when running the app, i receive the error message ...
java.lang.RuntimeException:
java.lang.illegalstateException:
Wrong db schema version.
DB = 4707 current 4560
Please run update utility.
My video must have java v 1.4. I have tried v13 of 1.4 but no luck. Going to newer Java SE prevents the app from running.
From where can I download an update utility? I don't know what to look for.
Running winXP sp2.
thanks for any help

Hi
thank you for the replies !!!!!
It turns out to be an application error in the database which has to be cleared/reset with a utility from the software vendor.
This was a clean install of the app. I have installed it several times before without this problem.
thank you for taking the time to help me out !!!!!!

Hiding Document versions from End user

Hi
I am in EP6 SP2 Patch 4 Hotfix 7 and CM Patch 4 Hotfix 4.
We are utilising the "Version Management" feature within Content Management.
After enabling "versioning" feature for the folder, I am able to upload multiple versions of the same document as a Content Owner/Administrator.
I am also able to see the different versions of the same document by clicking on to the Settings - Versions of the document.
However an enduser who has only "read" rights for a folder is also able to go into the document details and see the versions. I need to prevent this since he should be only restricted to see the latest version of the
document.
How can I control this ?
Regards,
Rajan.K

Hi Rajan,
When you activate the state management on that folder, you should get the desired behaviour. It is sufficient to activate the workflow without assigning approval steps.
If this doesn't work, you should verify, if the corresponding repository manager has the services state management and feedback assigned.
And be aware that you probably have to modify the service permissions of that folder as well, because normally everybody has full control. Change it to subscription only and check, if this works.
Hope that helps,
Stefan

How to restrict end user from modifying/saving the workbook?

<Moderator Message: As you deleted my comment in this thread by editing it again, I am locking it now>
Hi,
We have created few workbooks. The requirement is that the end user should not be able to modify or save the workbook. We tried using S_RS_Tools authorization object with "themes" in the Command ID. But this does not seem to solve our problem. Please suggest whether it is possible to enter any other value in this field to restrict access to the end user.
We also tried including the following authorization objects with the corresponding values :
1.S_GUI with the value Activity=60(import)
2.S_USER_AGR with Activity = 03 and * in Role.
3.S_BDS_DS with Activity = 03(display) and 30 ; Class Type = OT.
4. S_USER_TCD with tcode = RRMX.
But still the end user is able to modify the workbooks. (The end user must not be able to make changes to settings of any of the buttons in the design mode, must not be able to save the workbook).
Please suggest the corrections required. Also kindly suggest if there are any other ways to resolve this issue <removed by moderator>.
Your help is appreciated.
Thanks.
Edited by: Siegfried Szameitat on Nov 26, 2008 12:55 PM
Edited by: suresh naidu on Nov 26, 2008 1:19 PM
Edited by: Siegfried Szameitat on Nov 26, 2008 1:23 PM

Hi,
Only few people have authorization to create S.O. w.r.t. quotation (as in our case, sales ppl create quotation and Finance ppl create S.0., with reference to Quotation Only - T.Code: VTAA).
Others have only authorization to View/ Display, VA03.
Consult your Basis-Admin, he will create appropriate role & assign T. Code: va03 for list of user, provided by you.
Best Regards,
Amit.
Note: You can't restrict anyone with T. Code: VA02, to change qty or price in Sales order, directly.

Pdf restricting to save from end user

Similar Messages

Maybe you are looking for