PDF's with images open with dark (mask) overlay..not true in Explorer...how to change setting?

When browsing in Firefox, some links to PDF's that I open, those with images, open with a dark mask overlay. I have have searched around in the VIEW menu with no luck. This does not happen when I open the same PDF links in Windows Explorer so it must be Firefox setting that I need to change. By the way, I have Adobe Creative Suite 4 installed on my computer.

Similar Messages

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

My wife and I have iPhones with 2 different iTune accounts and iCloud accounts, How can I set my Mac and iTunes up to be able to sync all as 1?.

My wife and I have iPhones with 2 different iTune accounts and iCloud accounts, How can I set my Mac and iTunes up to be able to sync all as 1?.

You can't merge two iTunes accounts.

You've introduced TABS but I discovered by opening Yahoo and running a video that it continues when I open a new tab! Not good. Have I missed a setting or ???

You've introduced TABS but I discovered by opening Yahoo and running a video that it continues when I open a new tab! Not good. Have I missed a setting or ??? This may be just the way it is but it somewhat defeats the ease of going to a often used web site using tabs.

So, you are meaning that if you have a video running in one tab, then go to another, the video continues to run? yes, that is normal behavior.
Tabs are basically having like multiple windows inside one main window. It is just as if you opened a video in a window, started it playing, then opened a new window, the video would still play.
Or am I misunderstanding your question?

My Reader11.0.07 is showing a dark grey background today. Why? How to change back to the original white.

My Reader11.0.07 is showing a dark grey background today. Why? How to change back to the original white.

I have no idea what you are asking; can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

When I clicked on a link, it opens into a new window. I would prefer that it opens as a new tab. Does anybody know how to change this? Thanks

When I clicked on a link, it opens into a new window. I would prefer that it opens as a new tab. Does anybody know how to change this?
Thanks

Tools > Options > Tabs: [X] "Open new windows in a new tab instead"
You can look at the browser.link.open_newwindow prefs on the about:config page if you want to divert all JavaScript window.open() calls to a new tab.
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
* http://kb.mozillazine.org/browser.link.open_newwindow (3)

Can you make a PDF from multiple images open in Photoshop ?

Lets say I have 4 images open in different windows (or tabs) in Photoshop.
Can I make ONE pdf file from those 4 images at one single stroke ?
(I have PS CS4 EXTENDED)

The answer is no, you would need Photoshop CS2 or CS3 to do this. This function was removed in Photoshop CS4 and CS5
You can create the PDF in Bridge though.

PDFs Requiring Password to Open When That Option is NOT Configured

TSPAM:
Problem: PDFs that were created WITHOUT a password required to open are asking for passwords before they will open.
Expected Result: PDFs should open without asking for an open password unless they were configured to require a password to open.
Analysis: PDFs were created via export from InDesign CS6 to PDF Version 1.7 (Adobre PDF Library 10.0.1). Document restrictions were defined as, Allowed: Printing, Content Copying for Accessibility, Commenting, Filling in Form Fields, Signing, Creation of Template Pages; other abilities Not Allowed. Restrictions use password security. Require a password to open is NOT set active.
Once posted online, several users report that the PDFs are requiring a password to open.
I can't duplicate that behavior--meaning that I'm never prompted for an open password--in Acrobat X or XI on Windows 7x64 or Mac OS 10.8x or in Chrome, Firefox, Internet Explorer, or Safari on those systems.
The PDFs in question are linked from this page: http://iampariah.com/blog/creative-pro/cs6-keyboard-shortcut-cheatsheets.php

Hi Pariah,
There are two things here, 1) what is the version of the unencrypted PDF, and 2) how was the file encrypted.
The "may not display correctly" message occurs when the version of the PDF file is greater than what the PDF viewer (for us that's either Acrobat or Reader) understands. As an example, when Acrobat 1.0 came out 20 years ago it only understood PDF version 1.0. When Acrobat 2.0 was released it understood PDF version 1.1 and earlier. By Acrobat 8 it understood PDF version 1.7. If you had a PDF file that was version 1.7 and you opened it in Acrobat 7 (which I'm sure you've figured out only understands PDF v 1.6) then you'd get the "may not display correctly" message. Acrobat 7 would do its best to render the PDF, but if it came across something it just didn't understand it wouldn't (couldn't) display it.
Encryption is a bit different. Let's say you encrypt a file using Acrobat 10 and use the AES 256-bit encryption algorithm. If someone where to try and open the file in version 8, which only understands AES 128-bit encryption the the file could never be opened.
Finally there is the issue about how the password is saved. Acrobat 10 and later use a different methods of Unicode normalization and canonicalization then previous version, so if you've save a password using the Acrobat 10 or later settings then earlier versions cannot properly check that the password you've typed in matches what the document author set. I know this message thread started with the notion that there is no Document Open password, but it's not quite that simple. There really is a password, its just set to "NULL". However, Acrobat (and Reader) versions 9 and earlier cannot reconcile "NULL" set in 10 as they would "NULL" set in 9 and before. Thus, when the file tries to open in an earlier version you get prompted to reenter the password.
Steve

I have 2009 IMAC installed with latest OS X 10.8 Mountain Lion. But I don't have Ilife ,I can't find from my system.OS X 10.8 normally coming with Ilife ? It's true. Then how can I find Ilife?

I have 2009 early Imac installed with latest OS X Mountain Lion. But I can't find Ilife from my system. Normally Mountain Lion coming with Ilife loaded, it's true? But I can't find Ilife applications. Pls, advice me.

It is my understanding that iLife is not included with Mountain Lion, but with a new Mac... You only get it pre-installed as part of a hardware purchase.
I am not an expert, but hopefully someone else will be able to confirm this, and if correct it means you wil have to purchase iLife seperately from the Mac App Store.
Sorry!
Update: If you visit the online Apple store and start to order a new Mac, you will see that iLife is not included and can be added as an extra purchase.
You will have to purchase this seperatley.
Message was edited by: Ben Yafai

Phone restore with friend comp store id as friend mail how to change, phone restore with friend comp store id as friend mail how to change

phone restore with friend computer in app store id as friend mail how to change to my apple id
please help thanks
thiru

You can tap on the id in Settings > iTunes & App Store an dlog out of it and you can then log in with your account. If you copied any of your friend's content then that content will tied to their id.

Hyperlinks to PDF files with Excel XP will not open on Acrobat

Hi all;
I am having an issue with Acrobat Reader X.
I am using Windows 7 x64 Pro, with Acrobat Reader X, and MS Office XP and try as I might, I cannot create an Hyperlink to a PDF document. Excel says that "there is no program registered to open this file" and I have done pretty much everything I've seen on the net, including removing / reinstalling both programs, making sure it is registered in Regedit as the program to open this kind of files, repairing both programs through the control panel, I have also followed Microsoft advice on how to unregister/register a program to no avail, and a few others I cannot remember right now. I have recreated the same environnement in another computer, and it runs fine.
Does anyone has any idea what else I could try? Or, hopefully, an answer to the problem because you've already gotten it before and were able to fix it?
I thank you in advance for your kind help !
Nabil,

Hi,
This forum is for Adobe Reader on Unix platforms. It seems that you're using Windows, in which case the correct forum is at http://www.adobeforums.com/webx/.ee6b2e6/
-Gaurav

Photoshop TIFFs with layer masks do not display correctly

I am sure other people must have this problem, but I cannot find any related posts so here goes:
I open an image using the "open in external editor" command (typically a RAW file converted to a TIFF), edit in Photoshop and save the file (as a TIFF, I do not use PSD format)
If the PS edit contains any layer masks or alpha channels (masks in the channel pallet) it does not display correctly when it reappears in Aperture. Only the top most mask will display, assuming I have multiple layer masks in the PS edit.
Not only will the TIFF only appear as the mask in Aperture, but Aperture will print or email the mask, not the PS edited file as it should appear.
It seems that Aperture only recognizes the layer mask (or alpha channel mask) as the image, and all the other layers etc are disregarded.
Is this a confirmed bug, or is there some setting I have not correctly configured or some other issue?
I love Aperture, but this problem is nearly a deal-breaker for my workflow, and would be for any serious photoshop user, I would imagine!
I cannot believe this is still a problem in version 1.5, which is the version I am using (thus my system is 10.4.8)

David,
I assume you mean in the edited PS TIFF file:
In different cases I have either:
A. A TIFF file with layer a layer mask
B. A TIFF file with multiple layer masks
C. A TIFF file with an alpha channel mask
D. A TIFF file with multiple alpha channel masks
E. A TIFF file with any combination of the above
the outcome is the same, they all do not display correctly in Aperture. It does not seem to matter if the file was opened in PS from Aperture via the open with external editor command or if it was worked on outside Aperture entirely then imported. I do have maximize compatibility in PS checked (though I understand this is only for PSD files, though perhaps I am wrong here)
any thoughts?

PDF printing with oc4j apache fop not working

I am configuring PDF printing in Apex 3.1.1. I have set up a shared component report query with a simple query. I have implemented the oc4j standalone and implemented the fop.war as specified in the "pdf printing in Apex" documentation. When I use the test button to verify the output of the report, I am redirected to a 404-page not found and the oc4j instance logs the following:
08/09/09 12:02:36 [ERROR] Logger not set
08/09/09 12:02:36 [INFO] Using oracle.xml.parser.v2.SAXParser as SAX2 Parser
08/09/09 12:02:36 [INFO] building formatting object tree
08/09/09 12:02:36 [INFO] setting up fonts
08/09/09 12:02:36 [INFO] [1]
08/09/09 12:02:36 [WARNING] table-layout=auto is not supported, using fixed!
08/09/09 12:02:36 [WARNING] Sum of fixed column widths 662000 greater than maximum specified IPD 658800
08/09/09 12:02:36 [INFO] Parsing of document complete, stopping renderer
Any ideas why this is happening?
Database is oracle 9.2.0.7
OC4J standalone 10.1.3

Hello,
Just did some more search on this, and apparently it's a more common problem:
Re: PDF problem FOP mod_plsql: /pls/apex/wwv_flow.accept ORA-22293
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/

How to change/set the browser title from web forms (XP platform with SP2)

I am running Form9i, I have set the browser windows title from Web Forms dynamically by using following method. However, when my PC has changed to XP, the function seems not work. Does anybody have same problem and how to solve it? Any suggestions would be appreciated.
Add the Javascript code to your baseHTML file. For example,
if you are using the basejini.htm:
<HEAD><TITLE>%pageTitle%</TITLE>
<script language="javascript1.2" type="text/javascript1.2">
function Change(a) { document.title=a; } </script>
</HEAD>
In web Forms , call the javascript function with WEB.SHOW_DOCUMENT built.
For Example the following code set the browser title with username . web.show_document('javascript:Change('||'"'|| get_application_property(USERNAME)||'"'||')','_self');
Best Regards,
Bowie

Dear Frank,
Thanks for your reply. Can you tell me in detail which built-in function in Webutil can set value in browser title ?
Btw, is it possible for me to set parameter "separateFrame=True" in formsweb.cfg and set the form window title by using SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW,TITLE,v_msg_string)?
Best Regards,
Bowie

My iChat keeps coming up with invalid US number when im typing? How do i set it to UK

My laptop was brought from the states, if that matters?

System Preferences > Languages & Text > | input methods } ...
and check the checkbox at the bottom for [√] Show Input Menu in MenuBar
Now look at the flag that appears in the MenuBar.
-- if USA, and you wanted British keyboard input translation, go back to that same preference pane and choose the one with the UK flag (probably named "British", but there is no Scottish or Irish, so I think they mean "English-speaking UK").
First, check the checkbox for British.
Next use the Flag Icon to select British
If you have done it all correctly, the flag flying in the MenuBar should be the British flag.

PDF's with images open with dark (mask) overlay..not true in Explorer...how to change setting?

Similar Messages

Maybe you are looking for