PDF to images...

Hi,
I am running OS X 10.5.6, and am having issues with automator, specifically the PDF to images plugin. I cannot get it to save where I want it to. I can choose any folder I wish in the "Save output to:" pull down menu, and successfully output exactly as I wish while within automator. I can also use a custom name, and check the replace existing files radio button, while in automator, and all working.
However, When I save it and run it in the finder, it saves to the desktop, and does not replace existing files.
If I open the workflow in automator after I have run it in the finder, the pdf to images plugin in my workflow is reset to its default setting. I can save it again with settings as I wish, and all works great while within automator. But if I save it and run it outside all is reset.
I have renamed the workflow, deleted it and started from scratch, tried other locations, and saved as a plugin rather than an application and there doesn't seem to be any hope.
Is there someway, short of reinstalling my OS, to get this plugin to work correctly?
So far this is the only plugin I have noticed to behave incorrectly.
thanks,
-Me

Why didn't you use save as jpg?

Similar Messages

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

How to preserve original filename in Automator 'render pdf as images'?

Using Automator's 'render pdf as images' will result in output of files in random names
What are the correct workflow if the desired output files would be the original filename? Ex: manual.pdf ---> manual.jpg, manual.pdf ---> 0001bU.jpg
PS: I have tried 'Rename Finder Items--->Make sequential' but it still doesnt produce the desired output, it only makes manual.pdf ---> 0001bU-01.jpg

You convert the CMYK document to RGB using standard color management. The rest is beside the point. We know nothing about your experience in 3D nor your actual artwork, settings, system and so on. Just slapping on a texture on a 3D model doesn't make it look "real" or even photo-realistic. You have to understand lighting, shading and how to prepare textures properly, stuff for which you can find any number of tutorials on the web (though not specifically for PS 3D).
Mylenium

Scanning/Printing Documents to PDF using Image Capture

I am trying to scan a document (8.5 x 11) using image capture and then email it so that the recipient can read and print out an identical copy.  Even though I can successfully scan the document as a PDF using Image Capture, the document visually appears MUCH larger when the recipient receives and tries to print it.  The resulting printed copy shows only a fraction of the total text, but blown up.
I have Image Capture configured as follows:
Scan Mode:  Flat Bed
Document:  Text
Bit Depth:  1
Resolution:  300
Source Size:  8.50 x 11.00
Scaling:  100%
New Size:  8.50 x 11.00 ;
Format:  PDF
When I view a document scanned using the above settings in Preview, it looks fine.  The only problem is when I view it in Print Preview and/or print it.  Again, it is "blown up".  Can someone tell me what I am doing wrong and how to fix it???  Thanks.

Try with a resolution of 75 or 150.
Also when printing there are options to "fit to 1 page". The recipient should do that.

PDF icon images appear on desktop, but not in folders?

I just updated to Windows 7. Before the update I could only view pdf icons on the desktop and inside folders would be a screenshot pdf icon image of the file. This was very helpful when using a lot of pdf files.
NOW, after installing Windows 7, I have the exact opposite. I can see PDF image icons on my desktop, but when I go into a folder, I get the standard Adobe pdf red-white icon (no image).
Has anyone experienced this? Ive googled this and Im not the only one with this problem. Has anyone found a fix for this?
Thanks
Update: I forgot to add that PowerPoint files, jpegs and bmp files still work and you can still see the preview images. Just not PDFs.

function(){return A.apply(null,[this].concat($A(arguments)))}
~graffiti wrote:
What happens if you open an older PDF in Acrobat and do a "save as"? Does the icon come back?
graffiti - thanks for the reply. I did as you suggested but it didnt work. Now some icons are showing up but I dont know why nor do I know if this is a adobe issue or a windows 7 issues. While googling it looks like each side is blaming the other. Here is a screen shot. Some icons appear and one does not. I opened it and re-saved it but still doesnt show a thumbnail.
http://img845.imageshack.us/img845/4892/screenshotpdficons.jpg
Thanks for helping. Any other suggestions?

Why can I not get a pdf with images work with quick look in the ipad

Why can I not use the Quick Look function when I view a pdf with images, on my Ipad?

Try install the free Adobe Reader app
http://itunes.apple.com/sg/app/adobe-reader/id469337564?mt=8&ls=1

!! Exporting SWF file in PDF reduces image quality.

Hello,
I have a file with many multi-state picture frames and buttons for them. I export it in pieces in SWF format, then I put the SWF's back in the document as a new layer and export as interactive PDF. Finally everything worked fine, except that PDF opens in a larger then normal zoom and when zooming in on pictures the quality is very poor I am guessing 72ppi at the intended zoom. I check the SWF file and see that its image quality is good when zoomed, so the problem is with the way the PDF has exported the SWF.
notes: I made sure the settings were to export at 300ppi and high image quality. When I take a single multi-state frame with its associated button and export to SWF then PDF the image quality is maintained.... however I have over 150 image frames, so I rather not export them individually. Please, please reply... any suggestions will be gratefully excepted.

edit your image in photoshop and experiment with various settings/size. there's no magic high quality small file size setting.
it's a trade-off. the higher the quality and the greater the image dimensions, the greater the file size. you have to decide where those are acceptable.

HP Scan 1 bit scan to pdf embeds images as jpeg rather than tiff

Using HP Scan (latest version to date of 32.30.198.49673) and scanning in 'Black and White' to PDF (not 'Searchable PDF'), the image is embedded into the PDF as a jpeg (!!!), which means that the file is much larger than it needs to be, as it could go in as a lossless 1 bit tiff file. The image in the PDF looks like a 1 bit image, but 1 bit jpegs do not exist of course.
So, on a medium high image quality setting I get a file size (for a particular document) of 546KB, whereas the same scan to 1 bit tiff (on the same device with using HP scan) is 36kB (15 times smaller)
To be sure that it was embedding the scanned image as a jpeg instead of a tiff I set the file quality to low and you could see the jpeg compression artifacts which were a mixture of greys - thereby proving that it was a greyscale jpeg (of course, 1 bit jpegs don't exist), even though, visually, it looks just like a 1 bit scan in all other ways.
How can I get HP Scan, when I choose 'Black and White' to 'PDF', to embed the image as a 1 bit Tiff file, rather than a greyscale jpeg? I don't really want to store a file that is 15 times bigger in file size than it needs to be.
Thanks,
Mark

Hello @markp4000,
Welcome to the HP forums.
I understand that you would like the images saved as a .tiff instead of a .jpeg, when you scan to PDF.
Unfortunately there is no option to change how HP's software creates the PDFs.
You will most likely need 3rd party software to optimize your scanning results.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Why are PDF and Image Files embedded in all sent mail messages?

When sending mail with either PDF or Image Files as attachments, the person receiving the message does get the attachment, but the files are also embedded in the mail message. This will display the image file below my text, however with a PDF, it's just trying to display as an image but is just lots of garbled characters. Word docs are not embedded, just attached. Any ideas how to prevent this? I'm attaching files by using the attach button and browsing for the file like normal. Thanks!

View menu (alt+V) > Display attachments inline.

Automator: render pdf to images

I am taking a folder of pdf files all named numerically in the order they should be in and rendering them to images using the automator "render pdf to images."
This outputs the images with completly random names. Even using the "Rename Finder Items" as suggested right after the Render pdf to images still does not produce images in the right order.
This is really frustrating as I can't even see how this function could be useful for anyone if it can't produce images with some kind of logical file names.
Does anyone have experience with this?
Message was edited by: Jessek

Not sure what the testers of some of these actions were thinking about, but you might try using the Dispense Item Incrementally action to step through your file list one at a time.

Automator: Render PDF as Images changes the filename.

I have a PDF named "Bamboo Cutting Board Sales Sheet.pdf" that contains one image.
When I run the PDF through the Automator action Render PDF As Images, the filename is saved and changed to "002ddf334.jpg.
How do I keep the original file name?

I see.
This worked when I tested on 1 PDF:
The Run Shell Script Action is:
basename=${1##*/}
echo ${basename%.*}
If it's still out of order, add: Sort Finder Items [by creation date] after Render PDF Pages as Images

NeverCompressed list vs. CM issues on pdf or images

Symptom:
*.pdf & images causing errors on e.g. opening in CM, esp. on J2EE versions below SPS15. This might happen occasionally or always.
Technical cause:
Compression by J2EE
In J2EE default delivery 'image' & *.pdf is always on NeverCompressed key list.
Why compression might have been enabled again ?
Wrong instructions are given for compressing pdf and images in several guides:
1) http://service.sap.com/nw-howtoguides -> Portal, KM and Collaboration -> All -> How To Optimize Network Traffic in EP6.0, in Section "3.3.1 Configuring SAP Web Application Server (JAVA) Compression and Caching"
2) http://service.sap.com/nw-howtoguides -> Portal, KM and Collaboration -> Portal -> How to Fine Tune Performance of Portal Platform, in Section "3.3.1 Configuring SAP Web Application Server (JAVA) Compression and Caching"
"NeverCompressed
To enable script files compression, delete the following content types from the list: *.css, *.pdf, *.js, image, application/pdf"
Check if this recommandation was followed.
Compression doesn't make sense here roughly as compressing .gif or .jpg / .pdf does not bring any benefit of smaller content to be transfered, no beneficial ratio and is causing errors, esp. on J2EE versions below SPS15.
Solution:
- add image and *.pdf again to NeverCompressed key anyway.
- Alternatively exclude e.g. gif via Mime key value {.gif,image/gif} if other relevant images types where compression does make sense are in use.
The problematic HowTo guides will be corrected.

and sorry for the shoddy typing.... ipad/bed/typing dont mix very well

Resaving pdfs and image quality

I have clients submit ads as pdfs but sometimes I need to recreate the pdf because the client forgot to include all printer marks, or I need to convert a spot to process, or whatever. The way I do it is to create a new InDesign CS3 file, place the pdf file into it, and export to pdf using my preset. My question is does importing a pdf file into ID and then exporting back into pdf affect image quality, even slightly assuming the compression settings are the same in the export to pdf' dialog box - mainly all compression set to none?
Thanks.
-Mark

New Bie:
Many of the adjustments you want to make can be done to the PDF within Acrobat if you have the Acrobat Professional version.
Such as: convert colors, add printers marks and change Page Box sizes.
You'll find these tools under the "Advanced" menu > "Print Production"
And also under the "Document" menu > Crop Pages > Change Page Size

Save in pdf or image

http://www.marcospaulo.com/appweb/
After choose this colours ou textures of the owl
I want save/send mail....format:pdf or image .......Some help me??
I think better is javascript, but found sources for html5....nothing about this in the edge...

You should ask in InDesign
This forum is not about using individual programs
This forum is about the Cloud as a delivery & install process
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

PDF to images...

Similar Messages

Maybe you are looking for