PDF to JPEG shrinking problem

Hi Everyone,
I am trying to save a PDF image as a JPEG so I can bring it into power point.  The problem is that when I save it as a JPEG the picture size decreases dramatically from the original.  I have an image that is 34" by 12.5" and after I save it the image is only 11" by 4".  Is there a way to save the full size image?  It doesn't have to be a JPEG, but it has to be able to be imported into powerpoint.
Thanks in advance,
Andrew

Measurement in inches is meaningless without the context of resolution.  You should really be looking at the number of pixels wide/high for a PowerPoint presentation.
The PDF file may be unneccessarily resampled when opened in Photoshop. There is a way to open the image PDF file without changing size. In the Import PDF dialog, Select "Image" instead of "Page". Then resize to a size suitable for PowerPoint and save out PNG/JPG/etc.

Similar Messages

  • Colour problems saving Ilustrator file to pdf and jpeg (blacks go brown + some quality is lost)

    Hi,
    I was wandering id anybody could help me with a problem that has plagued me for a few projects now. I can't seem to find a solution.
    When I have a file in Illustrator that I want to save as or export as a PDF or JPEG whenever I save it the colours shift and the quality drops.
    Most noticiably black boxes goes to a muddy brown when saved to JPEGS, but I have also noticed tones in Photographs change quite a lot when saving as PDF.
    I have tried to tweek every type of setting there is. higher resoulution, compression, sampling, down sampling, PDF preset, print quality etc.but nothing seems to sort it out. PDF's arent as much as a problem as the JPEG but the only way I have managed to get a PDF up to a reasonable standard is by wacking everything up so there is no compression or downsampling which makes ginat files I cant email....
    Im sure the problem probably lies within the combination of each of these together but I cant seem to find out what that is.
    Has anybody else had this problem or know how to fix it? I have been searching blogs for so long?
    Thanks
    Leo
    (Before saving to JPEG)
    (After)
    Notice the black box with text in has turned a bit brown
    Also brown in the seat base has gone more orange and the whole picture has generaly lost quality.

    Leo,
    The file is CMYK Color Mode. Do you export to a CMYK JPEG or an RGB one?
    It is conceivable that the colour conversion of photographs (which are originally RGB) may cause the PDF issue.
    Obviously, you will have to choose a Color Mode. If (also) intended for print, the obvious choice is CMYK, but that often affects the appearance or artwork/images originally created in RGB.
    Colour management/settings and calibration may also be significant.

  • Problems creating PDF from JPEGs.

    I am using Acrobat Standard 6.0.5. I am having trouble creating a PDF from certain JPEGs. I created these JPEGs using a scanner and Photoshop Elements 5, saving them as 8-bit grayscale at 300dpi. When I create a PDF from these JPEGs in Acrobat, I get a blank, 1 inch x 1 inch image. I've tried zooming in and out and the image is still blank. The funny thing is that I can extract the JPEGs from the newly created PDF, so they are somehow present; I just can't see them.
    Some other data points:
    1. I can create a PDF from JPEGs from my digital camera. These are 180 dpi, 24-bit color, but otherwise I don't see any notable differences.
    2. I've tried converting the problematic JPEGs to 24-bit color. That made no difference.
    3. I've tried converting the problematic JPEGs to JPEG2000. That *did* make a difference -- I can create a PDF from them just fine.
    4. I can open the problematic JPEGs in Photoshop Elements and *print* them to PDF. That works just fine.
    There's obviously something about these files that Acrobat doesn't like, or else some configuration setting in Acrobat that needs to be adjusted, but I can't figure out what it is.
    Thanks in advance!

    JPegs are often problems. You might try saving to TIFF instead, the standard for scanners.

  • Hi! Windows 7 users can´t open the pdfs and jpegs that I have included into sent e-mails. How shall I resolve the problem?

    Hi!
    Prolems started after uploading the Lion in March. Now at least Windows 7 users can´t open any pdfs or jpegs that I have included into sent e-mails. They can see that they are included but can´t open them. What can I do?

    It's a bug in Outlook. Each version of Outlook has its own unique bug that prevents it form displaying email that didn't come from another Outlook user. Apple has attempted to dumb-down Mail and make it more complex in order to work around these issues, but Microsoft keeps changing the bugs in each version of Outlook instead of making an Internet Email standard compliant email client.
    Are they able to right-click on the image and save it from the contextual menu?
    Otherwise, make sure Send windows friendly, attachments at end of message are checked and send plain text.
    Or, zip the attachments and send that way.
    There is also a program called Attachment Tamer that many people have found useful.

  • Converting PDF to JPEG--tiny file, not full size image.

    using photoshop cs3
    End result is I want a jpeg of the same size as original. here is what i do and what happens.
    open pdf in photoshop; save as "jpeg"
    jpeg shrinks to an inch wide, from an original 8.5 inches.
    I've tried saving with compression off, saving pdf in various formats, nothing seems to work and my jpegs always save out very tiny.
    any help would be appreciated! thanks.

    I opened the file I attached to my mail in Photoshop and that's when it went small. I just looked on Apple forum and found a little button on the bottom right that was compressing the file. I hit "actual size" and have fixed the problem.
    It was a Mail problem, (or my problem:) not Photoshop or PDF.
    Thanks for your time and response...
    rf

  • Unable to export from the Book Module in LR-4.4 to Blurb, PDF and JPEG

    I have made a book in the book module and was really looking forward to send it to Blurb for printing. I push the "Send book to Blurb... " button but nothing happens. I have tried to export to PDF and JPEG aswell, but nothing. I am Connected to internet, I have an account at Blurb but no reaction. Are there any settings I have missed or are there any bugs that prevents me from exporting? Do Blurb ship to Norway or is that the problem? Please help!!!

    When you click on <Send Book to Blurb> a dialog should come up that asks for your ID and password for your Blurb account. I don't know if Blurb ships to Norway - you probably can find out at the Blurb website. But I don't think that this is the problem here since you also cannot export a PDF or JPGs.
    I don't know of any specifics why this is not possible for you but it's worth trying to replace the Preference File.
    This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File. 
    BTW: Re-installing Lr or updating / upgrading Lr does not replace the Preference File since it is designed to "survive" upgrades.
    See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
    See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • Adobe acrobat standard save pdf to jpeg is it possibel?

    I have a question about adobe acrobat standard.
    can you save pdf to jpeg? or is it just the Pro version that it works on?

    Try these steps to see if things are working at all. If they work, then it is a process of going one step at a time until the problem is isolated.
    1. Print a simple file to the Adobe PDF printer with print-to-file selected.
    2. Open the file created in (1) in Distiller and see if the conversion completes.
    If (2) is unsuccessful, you will get errors in the Distiller window indicating the problem. With success, the next step is to check if AcroTray is running, so simply print without using print-to-file. If it does not work, then look for AcroTray.exe in your Distiller folder. This application must be working if the print to Adobe PDF is to work correctly.

  • I want to attached scanned documents as an attachment.  So far in PDF and Jpeg the entire document appears

    Summary: Sending scanned documents as an attachment.  In PDF and JPEG the entire document is displayed rather than an Icon

    As long as you used the paper-clip Attach icon, that should be fine.
    The entire document appears to you because your Mac recognizes the document type, and displays it for you, saving you from having to mouse around and find a Reader for it. You can still use the Save icon to save a copy of only the attachment.
    To avoid problems with other email readers, be sure the checkbox [√] send windows-friendly attachments is checked.
    I addition, some email readers cannot cope with any attachments positioned at any place in the document other than at the very end. So make sure you move the cursor to the absolute end of the document before clicking "Attach".
    If all else fails, send an email that says, "attachment to follow", then send the attachment right away in a separate email, with nothing else in the body of the message. Some use the Subject abbreviation (nt) to indicate "no text", that is, no words typed in the message portion.

  • Converting JPG to PDF causes Fit Width problem

    Hello,
    I'm using Acrobat 8 Pro on Vista, Core 2 Duo, 3 GB ram, plenty of storage space, etc...
    I have about two hundred JPG images (500 to 700 KB each) that I want to convert and combine into a single PDF document. I clicked on Combine Files, Add Folder, selected Larger File Size and continued from there to create the PDF. But the resulting PDF document has a problem when viewed in Reader or any other PDF viewer. The problem is, when I switch to Fit Width view, only the first 3 pages/images fit the width of the screen. All the following pages/images actually get smaller than a Fit Page view.
    Does anybody know why this is happening?
    Thanks.

    Are you viewing the images in "Continuous" mode (you can see more than one
    page in the window at a time)? The JPEG images may be of different
    dimensions, and in continuous mode the page width zoom is set by the width
    of the first visible page. Changing out of continuous mode will allow the
    zoom to change for each page width as you scroll through the document.

  • Jpeg rendering problem

    Hi there I have a problem I hope someone can help me with.
    Im running INDesign Server and producing jpegs and pdfs through the soap interface.
    With some images when they are imported into the IDD template and exported out again as JPEGs they seem to lose the middle of the image. It like somebody has cut half the image out with a pair of scissors.When exported as PDF there is no problem. I was wondering if anybody has experienced this problem and can offer tips.
    I don't understand why some JPGs have the problem but others dont.

    i have the same issue- i see you had this issue in 2008, can you tell me if you figured it out, i also posted a question but I don't have too much hope of getting it answered...

  • I cannot export my saved book to pdf or jpeg or blurb

    i cannot export my saved book to pdf or jpeg or blurb. Nothing works. If i start a new book , then it works but i would have to redo the entire layout.
    Anyone have the same problem or/and anyone could help?
    Thank you

    Yes i do use LR4.3 .Idid upgrade to L4 from L3 , only because the book feature,to switch from blurb to PDF. I do use mostly my own images or combination of photo montage, but sometimes color backgrounds or lightroom graphics.
    I just reinstalled all my backgrounds and it seems like to work now.No explaination of what went wron (or what is wrong) as i am used to lightroom .May the fact that i am tweeking the layout (using the print layout) or the padding feature quite a bit but that's what the software is supposed to do.

  • Can I use preview to export multiple page PDF as jpegs?

    Using Preview, I export multiple page PDF as jpeg and results are the first page only as jpeg. Can I use preview to export multiple page PDF as jpeg for every page?

    Automator is great for this if you need to export many pages to JPG, or just have to do this often.
    Two other quick and dirty way sto get it done:
    (1) Enable thumbnail view, click on the ONE PAGE you want to convert to jpg, then choose "export." If you choose more than one page, only the first will get exported to jpg.
    (2) Create a copy of the file, delete all the pages except the one you want to export to JPG, and export that page. You may be able to "undo" the delete, get all your pages back again, and re-delete all but the one you want to export, etc. I would not recommend doing this on the original version of the file because of Preview's autosave so-called "feature."

  • How do I add a pdf or jpeg of my company logo to my signature on emails?

    How do I add a pdf or jpeg of my company logo to my signature on emails I send from my iPad2?

    Read this.
    http://howto.cnet.com/8301-11310_39-20017611-285/add-a-sexy-html-signature-to-ip hone-e-mails/

  • How to insert a pdf or jpeg image into a blob column of a table

    How to insert a pdf or jpeg image into a blob column of a table

    Hi,
    Try This
    Loading an image into a BLOB column and displaying it via OAS
    The steps are as follows:
    Step 1.
    Create a table to store the blobs:
    create table blobs
    ( id varchar2(255),
    blob_col blob
    Step 2.
    Create a logical directory in the database to the physical file system:
    create or replace directory MY_FILES as 'c:\images';
    Step 3.
    Create a procedure to load the blobs from the file system using the logical
    directory. The gif "aria.gif" must exist in c:\images.
    create or replace procedure insert_img as
    f_lob bfile;
    b_lob blob;
    begin
    insert into blobs values ( 'MyGif', empty_blob() )
    return blob_col into b_lob;
    f_lob := bfilename( 'MY_FILES', 'aria.gif' );
    dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
    dbms_lob.loadfromfile( b_lob, f_lob, dbms_lob.getlength(f_lob) );
    dbms_lob.fileclose(f_lob);
    commit;
    end;
    Step 4.
    Create a procedure that is called via Oracle Application Server to display the
    image.
    create or replace procedure get_img as
    vblob blob;
    buffer raw(32000);
    buffer_size integer := 32000;
    offset integer := 1;
    length number;
    begin
    owa_util.mime_header('image/gif');
    select blob_col into vblob from blobs where id = 'MyGif';
    length := dbms_lob.getlength(vblob);
    while offset < length loop
    dbms_lob.read(vblob, buffer_size, offset, buffer);
    htp.prn(utl_raw.cast_to_varchar2(buffer));
    offset := offset + buffer_size;
    end loop;
    exception
    when others then
    htp.p(sqlerrm);
    end;
    Step 5.
    Use the PL/SQL cartridge to call the get_img procedure
    OR
    Create that procedure as a function and invoke it within your PL/SQL code to
    place the images appropriately on your HTML page via the PL/SQL toolkit.
    from a html form
    1. Create an HTML form where the image field will be <input type="file">. You also
    need the file MIME type .
    2. Create a procedure receiving the form parameters. The file field will be a Varchar2
    parameter, because you receive the image path not the image itself.
    3. Insert the image file into table using "Create directory NAME as IMAGE_PATH" and
    then use "Insert into TABLE (consecutive, BLOB_OBJECT, MIME_OBJECT) values (sequence.nextval,
    EMPTY_BLOB(), 'GIF' or 'JPEG') returning BLOB_OBJECT, consecutive into variable_blob,
    variable_consecutive.
    4. Load the file into table using:
    dbms_lob.loadfromfile(variable_blob, variable_file_name, dbms_lob.getlength(variable_file_name));
    dbms_lob.fileclose(variable_file_name);
    commit.
    Regards,
    Simma........

  • First time using inDesign for multi-page web design. Trying to "print" a pdf or jpeg to show client. But it comes in blank (white) but file size is 1.8mb. help!, First time using inDesign for multi-page web design. Trying to "print" a pdf or jpeg to show

    Have created a web design using Master Pages. 5 pages in all. When I try to create a proof with pdf or jpeg the result appears blank (or white). How do I create something that I can send my client?

    Hello all,
    I appreciate your willingness to help.
    Did a test. Copy and pasted a page of my graphics into a new indd file and into a new master. New file works fine for exporting jpeg as well as pdf.
    Must just be something wrong with the original. gremlins. No time to wonder why.
    but....Thank you again.

Maybe you are looking for