Pdf Transparency problem

hello indesigners.
i printed out a pdf,and had some pngs inluded in the document.
when it was printed out,some of the png icons came with a black rectangle around them.what went wrong?
im trying to find the appropriate settings for my pdf to avoid such an issue in future.
thank you.

hello peter.
in overprnit preview its shows everythig perfect.
i had exported it and then printed it,and the settings where:
export to adobe pdf,is there a particular settings for masked images,and png images i should take notice of?
ps:could it be that the png icons are doing this due to that they are imported from psd files maybe?

Similar Messages

  • Transparency problems when I distort Pdf image size (ie: 100%x99%) then Export. Is there away to fix

    I sometimes have transparency problems when I distort PDF image size (i.e.: 100%x99%) then Export. Is there away to fix.   Or at least be able to preflight and know I have an issue.

    Mostly I have seen borders and drop shadows that will just go away or other wise not print right but only when I distort the image and only on very complicated large PDF images.  When I print it at same % both horz and vert. this problem goes away.

  • Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

    Good day,
    I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
    When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

    Good day abrieb93050306,
    I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
    As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
    Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
    This will probably resolve your issue.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

  • 10.6.8 combo & 10.6.7 pdf fonts problem

    Does the 10.6.8 update combo correct the pdf fonts problem that was inherent to 10.6.7?  After a couple days of stress I had to do the lengthy 10.6.7 uninstall process in order to refine my doctoral dissertation.  This has made me gun-shy & fearful of updates.  Is it safe to update now?

    The combo should fix your problem.  As always have a back-up in case you have to revert.
    The Font update came out to fix the problem in 10.6.7
    http://support.apple.com/kb/DL1377
    It should be rolled into the Combo-Update:
    http://support.apple.com/kb/DL1399

  • Illustrator cs6 + msword to pdf + links problem

    Hello!
    BACKGROUND:
    I have a TABLE that I need to inserted into my ILLUSTRATIOR file.
    Whatever method I'm using is failing as the text comes in but NOT the table.
    Instead, I just do this:   MSWORD > Print PDF > in Illustrator >  Place PDF.
    PROBLEM:
    But when I want to make CHANGES TO THE PDF (changes in MS WORD DOC - REprint to PDF).  The PDF file does NOT show up in the LINKS Box. 
    Therefore, I can't UPDATE it.  I'm always having to re-insert the PDF file  -- INSTEAD of like the other files PSD, or .JPG, or whatever else gets UPDATED.
    QUESTION: 
    WHY DOES THE PDF FILE not like the OTHER files that just hang out and can be updated in the LINKS box?
    Thank you,
    M>

    I'm using PC... but the LINK selection was NOT CHECKED.
    Funny.  I never checked that when I placed all the other IMAGES -- like ever.
    Thanks, Larry, that's exactly what needed to be done!!!!!
    SOLUTION:  PLACE >  Check LINK box. Done.

  • Help - PDF Attachment Problem

    Hi,
    Receently, some of our users experienced pdf attachment problem. The user sent a 4mb pdf attachment but after the mail was sent out it only showed 4k in sent item. When the recipient received the e-mail the attachment also showed 4kb and it can't be opend too. These users are using Outlook 2000 and our Exchange server is 2000 Enterprise.
    Thanks for the help,
    JY

    Hi Suresh,
    I just tried this thing in my systtem and it is working... BADI is trigerred everytime there is a change in the PO... even when you release there is a change in the PO so this BADI will be triggerred....
    I suggest you should implement BADI in your dev system and place a break point in the POST method...
    After that create a PO and release it using ME29N... thereafter when you save the PO... this method will trigger and you will have access to PO details...
    PS: Remember this BADI wont work for transaction ME29...
    Regards
    Gautam

  • Pdf attachment problems on osx lion

    Hello
    i was wondering if apple has fixed the pdf attachment problem seen on other iOS' such as 7.1.  I get the same error (blank pdf file, white screen), however, it doesn't happen all the time. 
    any explanations and comments would be greatly appreciated!

    OS 7 or IOS 7?
    If IOS 7, try the iPad community.
    iPad Community

  • Pdf fonts problem in 10.6.7 - resolved in 10.6.8 combo update?

    The pdf fonts problem in 10.6.7 forced me to go through the long uninstall process after a couple days stressing over what the problem was -- it was Adobe tech support that finally informed me what the problem was. Is the problem fixed in the 10.6.8 combo update?  Since I got no replies when I asked this question a different way yesterday, can anyone say (for helpful answer points) whether Apple would be inclined to answer this question if I just call them up (i.e., without existing AppleCare)?   Any other suggestions for getting official support on this question?   As it stands, I fear updating at all, and could be stuck with 10.6.6 for a long time.

    The combo should fix your problem.  As always have a back-up in case you have to revert.
    The Font update came out to fix the problem in 10.6.7
    http://support.apple.com/kb/DL1377
    It should be rolled into the Combo-Update:
    http://support.apple.com/kb/DL1399

  • Transparency  problems in director

    Hi all ,
    We are trying to acheive transparency for 3D models. When
    using png textures with transparency details we either get 100%
    transparency or 0% transparency. semi transparent areas are
    converted to 0% transparency. We are using 3dsmax 7.0 to export the
    3D models. The inbuilt shockwave player in 3dsMax displays models
    with correct transparency details , but when its taken to director
    we are getting transparency problems.
    Any one please help me
    How to get correct transparency for 3d models in director ?
    I also require following information.
    1. What version of directx is supported by Adobe director.
    2. Is there a standalone w3d viewer that supports directx
    9.0c .
    Thank you for your time and consideration.
    regards
    Avanthika

    when you export a model out of max it exports with
    transparency on some colors will show up invisible in the preview
    window
    but you can use 3dpi in director and turn transparency off or
    lingo but 3dpi is quicker

  • Frame Maker 9 and 10 PDF Print problem

    Frame Maker 9 and 10 PDF Print problem
    Hi I have an computer with windows 7 and the Adobe Software.
    The Distiller 9 with adobe Acrobat 9 and Adobe Design Standard CS3 is also installed.
    Now, I open in Frame Maker 9(Full Version) or 10(Trial Version)   an *.fm File. Then I go to “File- save as pdf” and then save I receive an message like this:
    “to execute the ‘Save as PDF’  is necessary to have install Acrobat Distiller 5.05 or higher”.  But I have the Distiller 9.
    Then I can click OK and now I receive another message like this:  “you must  define “PDF job options” if you want to execute it.”
    If I look for the PDF job options I can’t select something. But if I look in the Distiller I have a lot of option I can select.
    What is the problem. Is there a solution?
    Can somebody help me?

    Using AW 6.2.9 and Mac OS X v10.5.7, the file prints successfully to pdf using the "Save as PDF..." option in the print dialogue. I didn't try to print the result to paper, but that appears to eliminate the file itself as the cause of the problem.
    Two first aid steps that might resolve the issue:
    Delete the AW preferences.
    In the Finder, click the house icon (yourname) in the sidebar of a Finder window, then Library > Preferences..
       Locate and delete the file com.apple.appleworks.plist
       Open the folder AppleWorks
          Delete both cache files and the two preferences files.
          It's also safe to delete the Button Bars file, but unless you have issues related to the Button Bars, you're also safe to leave it there.
    AppleWorks will create new (and clean) versions of these files as it needs them.
    Repair Permissions.
    Go Applications > Utilities > Disk Utility
    Launch the application, select your startup drive, click First Aid, click Repair Permissions.
    Regards,
    Barry

  • PDF Export Problems

    bei using interactive functions in inDesign CS5 and then exporting to pdf, I am able to see exactly everithing I wanted in AcrobatPro, but not in Adobe Reader. What can I do, so that anybody who uses Reader can see it too? Anybody knows?? Thanks

    Re: PDF Export Problems
    created by Jeffrey_Smith <http://forums.adobe.com/people/Jeffrey_Smith>  in
    InDesign - View the full discussion
    <http://forums.adobe.com/message/4271659#4271659>
    What is it that you can not see in Reader: button behavior, rollover effect,
    hyperlink, etc. ?
    Wow, I am impressed about the fast reaction:-)
    The interactive function I am using (unfortunately in German inDesign) is
    "button" > Action: by letting go (?). It's a file with some 100 pages and
    some 500 links. Exported as pdf interactive...
    The effect In AcrobatPro: when clicking on the thumbnail the original
    picture shows in a separate window without closing the original file. After
    closing the new window, I could continue in the multipage file...
    This is not happening in Adobe Reader. It says: the link was not found, and
    here and then, when shown in e new window, the multipage file is closed...
    Hope this helps..
    Thanks Jaro
    PS
    I did reply on the forum directly, but no success. There trying via mail.
    Hope it works:-)

  • More PDF Printing Problems

    There are lots of notes in this forum crying about PDF printing problems. For what it's worth, I'd like to add mine.
    I'm using Jakarta FOP to generate a PDF on the fly from XML data. The PDFs it's producing are read and displayed nicely by Adobe Acrobat and print from Acrobat without a problem.
    I've also written a simple desktop app that exercises the java.print package. (I won't bore anybody with a listing.) It uses the PrintServiceLookup to discover the two networked printers I have attached to my machine, using DocFlavor.INPUT_STREAM.AUTOSENSE. I have it discover all the supported document flavors. Here's the result:
    application/octet-stream
    application/x-java-jvm-local-objectref
    image/gif
    image/jpeg
    image/png
    I can sent text documents to the printer without a problem. But when I try to send a PDF generated by FOP that renders and prints fine from Acrobat, I get gibberish text out. I'm using DocFlavor.INPUT_STREAM.AUTOSENSE as my DocFlavor when I create the doc.
    I don't see application/pdf on my list of supported document flavors. Should I? If that's a requirement, what do I have to do to the printer to get it on the list? Why is Adobe Acrobat smart enough to print to a printer wo/ this flavor and javax.print not? TIA - MOD

    Now I get it - I can't send PDFs from Java to a printer. A careful reading of forum threads and John Zukowski's note have driven a stake into the heart of the vampire.
    I can bring them up just fine by creating the PDF using FOP and then sending the page back to the browser for rendering. If my client could just print the document from his machine, all would be well.
    However, my app has a situation where some label printers will ONLY be attached to the server. They won't be visible from the client. I thought I had a solution with javax.print, but now that hope's gone.
    The printers I have aren't Postscript, so suggestions to ask FOP to generate Postcript won't help me.
    Adobe's site didn't offer any relief.
    I haven't been able to find any for-fee or open source packages that might help. Plenty of stuff out there to convert to PDF, but nothing that helps to print it once you have it.
    Is there any point in entering this as a bug in the database? It's less bug and more vaporware. After all, the docs never SAID they'd thrown an invalid flavor exception if you tried to print a PDF.
    Sun, are you listening? - MOD

  • Strange transparency problem trying to print a pdf made in Pages

    Hello,
    Let me apologize in advance for this one, I think it's probably a doosy.
    Not having the know-how to efficiently do a layout in InDesign, I have been doing print projects in Pages. It has worked fine in the past to print to Adobe PDF postscript from Pages, open up Distiller and convert to a CMYK pdf from there. For my current project it worked fine for the first 2 renditions, but for the 3rd edition (incidentally the one the printing company printed) looked very "muddy." Fonts were very rough and rasterized badly, and the whole thing looked kind of "brown-washed". They claimed to use a program called "Apogee" which they said told them there was a transparent layer over everything, converting all the fonts to CMYK and thus making them lose their nice crisp blackness.They've also said that it must be a setting in Pages that has caused this, but I can't see how that's possible! When I look at the source file in pages there is no such transparency. Several of the images do have their opacity decreased to varying degrees to help the whole piece blend, however this transparency they say Apogee pulled off the top cannot be seen from my end. We are down to the wire trying to get this job to print again, but I am stumped as to how to ensure that this rendition of the file will be done correctly.
    As perhaps a side note, Distiller seems to be a pretty quirky application for me, often failing to convert on the first or second try, but somehow "magically" working on the second or third attempt for no apparent reason and without doing anything differently.
    Thanks so much for any help - I am definitely cracking out the books and forcing myself to learn InDesign after this nightmare!
    - A-J L.

    They claimed to use a program called "Apogee"
    Agfa Apogee, introduced in 1998, was simply the first prepress workflow product that processed page-independent PDF instead of processing page-dependent PostScript into an internal and intermediate display list prior to marking. The prepress operator would be using Apogee to preflight the PDF you submit as printing master, and the problems found in the preflight are those of which you were informed.
    As perhaps a side note, Distiller seems to be a pretty quirky application for me,
    Adobe Acrobat Distiller has been difficult to configure since the day it was introduced.
    Adobe Acrobat Distiller is a PostScript interpreter that converts page-dependent PostScript page description programs into page-independent PDF page descriptions without programming loops and links that produce dependencies. PDF uses a directory design for the objects in the page descriptions, a design that originates with Xerox Interpress (the idea of a directory is in fact printed on page 390 of "Interpress - The Source Book" by Harrington and Buckley published in 1988).
    converting all the fonts to CMYK and thus making them lose their nice crisp blackness.They've also said that it must be a setting in Pages that has caused this, but I can't see how that's possible!
    It is left to 'application intelligence' whether to match RGB black for type to CMYK black for type or to match RGB black for type to separationBlack for one plate/plane on a four plate/plane offset press. The problem with an offset press is that it lays down the inks at inking units that are some distance apart which invites misregistration. QuarkXPress, PageMaker, InDesign and other authoring applications developed for PostScript imaging on offset presses have ink palettes with four fixed inks of which Black produces separationBlack.
    Pages does not have this possibility, so if you want your type to image as deviceK / separationBlack then you need to select your type and apply the following procedure, or set up styles with the following procedure applied. Open the Apple Colour Palette, select the CMYK slider mode, select some type, select the Advanced icon (the colour space icon on the left), in the drop-down menu select Device CMYK, and set the slider to C0, M0, Y0, K100. This procedure can be used by the typographer to control that deviceK / separationBlack is imaged, but for as long as Microsoft Word has produced type that is RGB, prepress processes have intercepted this in PostScript and reset it to deviceK / separationBlack including Helios colour management for OPI.
    In prepress there is no way to please all parties. If you as developer say, "OK, I'll set the type to deviceK and then show this colour managed on the display" then you will have designers and people who write for designers like Sandee Cohen yelling at you for making type less black than they think type should be, even if in fact the colour of type printed on diffusing uncoated paper is way lighter than they think. And if you say, "OK, I'll set the type to R0 G0 B0 so it is as black as the designers think type should be" then you'll have the prepress crowd with their offset presses yelling at you. Neither party accept that black is a colour, one wants type to be as black as possible regardless and the other party wants type to mark on one and only one printing plate/plane regardless.
    converting all the fonts to CMYK and thus making them lose their nice crisp blackness
    I would wager a box of Carlsberg beer that the prepress operator is ignorant of the controls in Agfa Apogee, and that Agfa Apogee has a control to catch RGB type and convert to deviceK / separationBlack. Try telling the prepress operator to READ the manual -:).
    Several of the images do have their opacity decreased to varying degrees to help the whole piece blend, however this transparency they say Apogee pulled off the top cannot be seen from my end.
    Generally speaking, you should not be sending plain PDF to prepress. You should be sending PDF/X-3 which depends on you as designer flattening transparency, or better still PDF/X-4 which passes the problem of flattening transparency to the application intelligence of the prepress raster processing system. PDF 1.3 does not support transparency nor does EPS and nor does PostScript any language level.
    /hh

  • Transparency problems in Adobe illustrator AI when converting to PDF

    I just recently started working on an iMac, and am enjoying it very much!!!
    Here's the problem; I often work in AI and then convert my doc to PDF for print. the pdf appears to be fine when seen on my screen, but when printed, many objects that should be trasparent, print with a white square around it. for example a photo shop PSD that has a transparent background. this happens even if my psd layers were flattened. even more maddening, this problem also occurs with vector objects containing transparencies, ,(such as eps or other ai files that were embedded in my AI file), with attributes like  lower opacity, screen, darken or multiply, or feather.
    again the exported PDF looks FINE on screen ,even PRINTS fine on my office printer, but when SENT TO THE PRINTER,, it prints really ugly, with squares
    around objects and wrong colors. sometimes I can detec these  problems by e mailing the file through google, but not always.
    I did not have this problem on my old PC, this started on the Mac.
    the only solution I can currently think of is to export as JPEG. that is not very good for text and most  printers prefer PDF
    I am currently using Adobe CS5.

    http://helpx.adobe.com/illustrator/kb/improve-transparency-flattener-performance -illustrator.html

  • Drop shadow in .ai causing transparency problems for .eps (needed for MS Publisher – PDF)

    I have icons with drop shadows created in .ai. I need to make the icons available for others who use MS Office Publisher to create print materials (export to PDF). I use .eps files for this however the drop shadow is making a white background (if I take out the drop shadow the background is transparent). How do I save the icons so that the background is transparent with the drop shadow?
    Thanks.

    Simply, you don't.
    EPS is a flat file format and does not support transparncy, therefore all transpency is flattened upon saving.
    You may be better off saving as png or pdf to support transparency.

Maybe you are looking for