PDF verson out of Documaker 12.1

We are working on a project to use the signature
place holder in documaker.  The software that receives the PDF from documaker
needs the pdf to be version 1.4 or higher but documaker is producing pdf’s that
are version 1.3:
Is there a way that we can configure documaker to
produce pdf versions 1.4 or higher?  The pdf driver that documaker is currently
using is PDFW32.DLL.  Maybe there is a different driver that will produce the
newer version of the pdf.  If there is another driver I don’t know where to get
it from.  Anything you can do to help would be appreciated.
Thanks,

The short answer is no. The version of the PDF tells the reading applications what to expect in the document. Therefore you want the version to reflect the level of support required to accurately read the content. If you specify a high version when not necessary, it is possible that readers may mishandle the document. Likewise, the higher version you specify means that older readers may not allow the file to be viewed. So 1.3 is apparently the PDF level required for Documaker PDFs and includes enough support to handle those placeholder signatures. The question is why is the signing application requiring a version higher than necessary.

Similar Messages

  • Open a pdf with out print or save button

    Hello,
    Is there any way to open pdf with out using save or print and also make other users to not to open the file.
    thanks

    Hi,
    My understanding is that you have a PDF document in a document library and you want to open the PDF in one click.
    If my understanding is right, then you can set the default open behavior to ”open in the client application”.
    Also, please install the corresponding software to  the default program of opening the PDF.
    About making others not to open the file, you can set the Library permission for specific user to achieve it.
    Here is a detailed article for your reference:
    http://blogs.technet.com/b/officeasia/archive/2013/01/09/configure-sharepoint-server-to-open-office-documents-in-client-application-by-default.aspx
    https://support.office.microsoft.com/en-us/article/Manage-permissions-for-a-list-library-folder-document-or-list-item-9d13e7df-a770-4646-91ab-e3c117fcef45?CorrelationId=46b5ab40-7045-4790-96d1-159b8afbf672&ui=en-US&rs=en-001&ad=US
    Thanks
    Best Regards
    Jerry Guo
    TechNet Community Support

  • The Best pdf reader out there

    Hi Guys,
    There are many free pdf readers out there in the market...adobe reader being the dominant one...still, many people just do not use adobe reader because of the blot...it is slow...is heavy...download size is big and then there are too many update pop ups....
    so, which pdf reader would you choose? (I have been using foxit reader..and find it very good...stable...and fast..)

    It all depends on your individual usage.
    If you want to view/print simple PDF files, Foxit would probably be fine (spyware aside).
    If you want to view and interact with more advanced PDF's (3D, commenting...etc), then Adobe Reader would be a better choice.
    Basically, there is no overall better reader that would fit all situations.

  • Securing and protecting PDFs produced from Oracle Documaker

    Hi Experts,
    Is there anyway to secure and edit/ password protect PDFs produced from Oracle Documaker? This will enable us to protect editing, copying of content from the PDF.
    Thanks

    Yes.
    See Chapter 4 pages 63 through 79.
    http://download.oracle.com/docs/cd/E16256_01/pdf_book.pdf
    This is 11.5 documentation; what version are you using?
    -DA

  • How to get PDF icons out of Word Toolbar??

    Hello all,
    I installed photoshop CS2, and now I cant seem to get the "make pdf" icons out of the toolbar.
    I went into the toolbar options in word and de-selected "Adobe acrobat PDF maker" which removes them for that session. But the next time I restart Word they are right back where they were before!
    Any ideas??

    Kill these files:
    Hard Drive/Applications/Microsoft Office 2004/PDFMakerLib
    Hard Drive/Applications/Microsoft Office 2004/Startup/Word/PDFMaker.dot
    Hard Drive/Applications/Microsoft Office 2004/Startup/PowerPoint/PDFMaker.ppa
    Hard Drive/Applications/Microsoft Office 2004/Startup/Excel/PDFMaker.xla
    The next time you launch Acrobat 6, you will get an error message asking to repair PDFMaker. Uncheck PDFMaker, check Don't show this again, and click Continue. That is the end of the annoyance.
    Or from Macworld.com:
    5. Banish Acrobat from Microsoft Office
    If you have Acrobat 6.0 Professional and Microsoft Office v. X, you may have noticed a small Acrobat PDF toolbar in Excel, PowerPoint, and Word. The file responsible for this toolbar can become corrupt, causing intermittent problems, such as slower performance. To permanently delete the toolbar, search your Mac for all instances of PDFMaker.xla, PDFMaker.ppa, and PDFMaker.dot, and delete those files. You’ll never see the Acrobat PDF toolbar in Office apps again.

  • PDFs print out darker in Windows Reader 9.0 than Mac Reader 9.0, also Win Reader 9.0 darker than 8.x

    Hi,
    Using Adobe Reader 8.1.2 for Mac OS X and 8.* for Windows, my PDFs printed out identically for both platforms.
    However, after I upgraded Windows Adobe Reader from 8 to 9.0.0, it prints out the PDFs significantly darker than before, whereas when I upgraded the OS X Adobe Reader from 8.1.2 to 9.0.0, the print outs did not get any darker.
    Now they are both on v9.0.0, Windows printouts are significantly darker than the OS X printouts, using the same PDF file, printer, etc.
    Any idea what's going on here? Is there some of weird gamma correction-type thing going on - although I thought that only affected monitor displays, not print outs? Or should I report it as a bug?
    The PDF I am testing is here:
    http://egalo.com/guitar-fretboard-visualisation-sheet.pdf
    I also tried printing it out from other PDF viewers - Preview.app on OS X and Foxit Reader on Windows - and they both print out normally i.e. the same as Adobe Reader 8.* for all platforms, and 9.0 for OS X - definitely not as dark as Adobe Reader 9.0.0 for Windows.
    I'm running OS X 10.5.4 and Windows XP Professional as a VM using Parallels.
    Needless to say, I want to be able to generate PDFs that have the same darkness regardless which PDF viewer or OS platform is being used to print it out.
    Thanks, Xen
    [Edited to improve clarity]

    Thanks Michael,
    The file that I have sent her has both vector and raster graphics in it, and they were apparently printing fine. It just seems to be text that's not printing correctly.

  • How do I move PDF files out of iBooks and into Goodreader?

    Question. How do I move my PDF files out of iBook and into Goodreader. ??

    I may havE found why the files disappear in the first place.
    In iTunes, after connecting your iPad, check on the sync list. Click the "books" tab and be sure that "Books and PDF files" is selected. Then go thru the list and be sure all the PDF files you want to save are checked.
    Perhaps this wasn't done causing the PDF files to not be synced and thus restored during the conversion to iOS5.
    Thanks for your help. I will stop worrying about it and in any case, I  now have several ways to recover those PDF files.

  • Problems printing PDF-X3 out of Scribus

    Hello everybody,
    I'm trying to print a PDF-X3 out of Scribus. The X3-compatiliby-check seems to have no problems,
    but the Distiller says:
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    %%[Page: 3]%%
    %%[ Error: undefined; OffendingCommand: Ã ]%%
    Stack:
    -save-
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    I have no idea was the problem is! May anyone help?
    Greetz Sanne
    It seems to be the same problem if I don't use PDF-X3. What does that mean "OffendingCommand: Ã"? I can't find the errortype anywhere!
    Message was edited by: Morgas1612

    Hi presottom
    Please refer ; http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
    or
    Let us know more details about it to help you better ?
    What is the OS ?
    is there any error message , etc .. ?

  • Export to PDF Alignment Out

    Hi ,
    I was using WAD to create a function to export Analysis Grid data to PDF in portal. However the alignment after generated to PDF was out.
    For e.g the data in the second column will appear/combine with the first column data. is there any fixes to it?

    Hi,
    Plz. check following SAP Notes, if applicable as per your BI Ver/SP Level.
    Note 1133749 - Analysis item: Export to PDF fails
    Note 1106173 - SPS 12/13/14: Print/export of analysis item is incorrect
    --Priya

  • Why does my PDF come out rotated when I haven't selected that?

    Why does my PDF come out rotated when I haven't selected that?

    What you are trying to do is a process that we call “refrying a PDF file,” a process that we at Adobe most strongly discourage. There are facilities within Acrobat itself that allow you to remove objects and crop pages without having to ruin the PDF by creating PostScript and then distilling that back into PDF, a potentially very lossy process. You lose all color management, all live transparency, and could have font problems in the resultant PDF file.
    The Adobe PDF PostScript Printer Driver Instance is parameterized by joboptions set in its properties. These properties have a parameter for page rotation. If the options specify automatic page rotation, you may be getting these unexpected results on the basis of Distiller's analysis of each page and trying to second guess the orientation. You should also be aware that the PostScript generated by Acrobat (and Reader) is optimized for printing on a PostScript device, not for generation of PDF by distillation.
              - Dov

  • I work in psd, i want to send mail to pdf,  with out pixel, how do i do ?

    i work in psd, i want to send mail to pdf,  with out pixel, how do i do ?

    Well it is difficult to understand your question so little information, and with an apparent language problem, but you can can Save As to the pdf format.  If you have any text layers, do _not_ flatten before exporting.  Use a High Quality Print preset in the PDF dialog box, unless file size is critical.
    If I have misunderstood your question, please give a lot more information, including what version of Photoshop.  You can use your own language if that is easier, and we'll use the forum Translate feature, but the more information you put in your post, the better chance of it being understood.

  • Saving smallest pdf file out of Illustrator

    how do i save the smallest possible pdf file out of Illustrator?

    Does your Illie file contain placed images?
    Are you working in RGB or CMYK?
    How do you intend to use the pdf?
    A lot of questions need answering.

  • Converting to PDF - getting Out of Memory??

    using CS3. Ive tried converting in press quality and smallest size and both give me out of memory. Have tried printing to PDF and get out of memory. Have tried dropping the INDD file into Acrobat Pro and get out of memory. Have tried printing to POstscript and get out of memory. I know I have plenty of hard drive space and ram so thats not a problem, I also convert to PDF's all the time and still can with other files but not this stubborn one. The only thing unique about this file is that its 36"x72" but its just basic text and a single not-so-great quality TIF enlarged in the background. What could be causing this?

    its not really large of a file at all except for in dimensions but ive done poster sized stuff before with no probs. It never gave me any spicific errors other than just "OUt of Memory", nothing mentioned about DLL's. Out of curosity, I took off the feathering edges that I had on the background graphic and well, it worked! I have no idea why the feathering would have to do with it running out of memory but I guess Ill just have to deal with it with no feathering till I figure out otherwise

  • Preview PDF grayed out

    I am using Designer for the first time, and I wanted to preview the PDF after I had added a few fields to a new form.  But when I go to turn on the View > Preview PDF tab the selection is grayed out.  I can publish the PDF and tehn look at it, but that's a pain.  I have Adobe Acrobat Pro 9.0, and I selected that in the Properties - Default, but it is still grayed out.
    Help!

    Hi,
    Try starting Acrobat first (and have it in the background) then start up LC Designer.
    Also have a look at the preferences in Acrobat. The display in browser affects whether LC designer previews the form in LC or pushes it out to Acrobat.
    Hope that helps,
    Niall

  • How to get a pdf document out of a Document form

    Hi all,
    I have a question of how to get the actual PDF out of a Document Form, when I take the @document value I only get some xml representation of the form, but I need to get the actual PDF.
    Thanks in advance
    Sincerely
    Kim

    The @document is the way to get the PDF out from the DocumentForm varibale. If you get just the data, it's because the DocumentForm was populated with just the data in the first place.
    Make sure you submit PDF from your form and not just the data.
    Jasmin

Maybe you are looking for