PDF zoom on opening

When I open PDF's they often open in a zoom mode can I turn this off so they open at 100%

You can set your preference under Preferences -> Page Display BUT the creator of the pdf can trump your settings if they want it to open in a certain way

Similar Messages

When I export a PDF the file opens larger than resolution so it is pixelated? How do I stop this?

I have created a Indesign document of 1024 x 768 and exported it as a 72dpi PDF. The PDF is only to view on screen.
My problem is that when I export the PDF it always opens more then 100%. So everything is slightly pixelated. To see everything in focus as I want it I would need to zoom out.
Obviously I want everyone to view it as I see it so how do I get around this.
I choose 1024 x 768 just incase someone wanted to view it on a Ipad. Should I have just created it bigger to over compensate of this problem. I guess on an Ipad the PDF would just be shrunk so the whole page could be viewed and I guess that wouldn't be pixated?
Thanks in advance for any help!
Dan

Set the initial view in Acrobat Pro and resave the PDF there.
Bob

Safari 7 PDF Zoom Level

Since upgrading to Mavericks Safari no longer remembers my previous PDF zoom level. I am using Safari's build in PDF viewer, not Acrobat. Prior to Mavericks Safari would remember my last zoom level (I prefer Actual Size). Now PDF's always open in Automatically Resize mode and fill the width of the screen. I open a lot of PDF's in the browser and it is rather annoying to have to manually change the zoom level every time. Anyone else having this issue or know how to fix this? Thanks!

Moreover, automatically resize fits page to the width of window. This is the most stupid thing ever, considering my display is 1920*1080. It feels like every single letter is the same size as my eyeball.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

PDF Attachment Email Opening issue in ECC6

Hello,
We are having problem with below report. I'm able to send emails(invoice) as PDF attachments , but the attached PDF file wont open. I'm getting a message "Adobe reader could not open attachement the file has been damaged".This report works in our old version 4.6c but we just upgrade to ecc6. Please Please help.
Thanks,
Jose
REPORT zrfi_customer_statement_new
NO STANDARD PAGE HEADING
MESSAGE-ID zm_load
LINE-SIZE 325
LINE-COUNT 65(3).
Tables *
TABLES:
bsid, bsad, knb1, kna1, knkk, t001, t014, t179t,
t052, fplt, vbap, veda, vbrk, vbpa, vbkd, knvk,
cepct, tvzbt, vbak, bsik, tsp01, usr21,adr6, tsp03l.
Internal tables *
DATA: i_bsid LIKE bsid OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_bukrs OCCURS 0,
bukrs LIKE bsid-bukrs,
waers LIKE bsid-waers,
END OF i_bukrs.
DATA:
BEGIN OF i_temp_data OCCURS 0,
bukrs LIKE bsid-bukrs, " Company code
kunnr LIKE bsid-kunnr, " Customer
belnr LIKE bsid-belnr, " Invoice
gjahr LIKE bsid-gjahr, " Fiscal year
waers LIKE bsid-waers, " Currency
rebzg LIKE bsid-rebzg,
bldat LIKE bsid-bldat, " Posting date
shkzg LIKE bsid-shkzg, " Debit/Credit
zfbdt LIKE bsid-zfbdt, " Baseline date
zterm LIKE bsid-zterm, " Terms of payment key
dmbtr LIKE bsid-dmbtr, " company currency
dmbe2 LIKE bsid-dmbe2, " Amount in Group Currency
days LIKE rfposxext-verzn, " No of Arrear Days
kidno LIKE bsid-kidno, " Payment reference number
kunnr_c LIKE vbak-kunnr, " Partner Number
name_c(50), " Partner Last name
matnr LIKE vbap-matnr, " Material no
arktx LIKE vbap-arktx, " material description
vbeln LIKE vbap-vbeln, " Contract/Order no
inv_date LIKE vbrk-fkdat,
xblnr LIKE bsid-xblnr,
xblnr LIKE bsid-zuonr,
vtext LIKE vbap-arktx, "material description
sgtxt LIKE bsid-sgtxt,
plant LIKE t001w-name1,
zzihrez_e LIKE vbap-zzihrez_e,
vvtext LIKE tvzbt-vtext,
blart LIKE bsid-blart,
zuonr LIKE bsid-zuonr,
END OF i_temp_data.
DATA:
BEGIN OF itab OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer
bukrs LIKE bsid-bukrs, " Company code
kunnr_c LIKE vbak-kunnr, " Partner Number
name_c(50), " Partner Last name
matnr LIKE vbap-matnr, " Material no
kidno LIKE bseg-kidno, " Payment reference
name1 LIKE kna1-name1, " Customer name
belnr LIKE bsid-belnr, " Invoice
waers LIKE bsid-waers, " Currency ( Document )
gjahr LIKE bsid-gjahr, " Fiscal year
zfbdt LIKE bsid-zfbdt, " Baseline date
zterm LIKE bsid-zterm, " Terms of payment key
amt00_30 TYPE netwr_ak, " 000 - 030 Days
amt31_60 TYPE netwr_ak, " 031 - 060 Days
amt61_90 TYPE netwr_ak, " 061 - 090 Days
amt91_120 TYPE netwr_ak, " 090 - 120 Days
amt120pls TYPE netwr_ak, " 120+ Days
total TYPE netwr_ak, " Row Total
inv_date LIKE vbrk-fkdat,
rebzg LIKE bsid-rebzg,
xblnr LIKE bsid-xblnr,
xblnr LIKE bsid-zuonr,
sgtxt LIKE bsid-sgtxt,
days(5) , " No of Arrear Days
inv_chk LIKE bsid-xblnr, " invoice/check/wire transfer no
vtext LIKE t179t-vtext,
zzihrez_e LIKE vbap-zzihrez_e,
plant LIKE t001w-name1,
vvtext LIKE tvzbt-vtext,
bldat LIKE bsid-bldat,
blart LIKE bsid-blart,
zuonr LIKE bsid-zuonr,
END OF itab.
DATA: BEGIN OF i_final OCCURS 0,
inv_chk LIKE bsid-xblnr, " invoice/check/wire transfer no
bldat LIKE bsid-bldat,
xblnr LIKE bsid-xblnr,
inv_date LIKE vbrk-fkdat,
name_c(50), " Partner Last name
vtext LIKE t179t-vtext,
zzihrez_e LIKE vbap-zzihrez_e,
plant LIKE t001w-name1,
vvtext LIKE tvzbt-vtext,
total TYPE netwr_ak, " Row Total
days(5) , " No of Arrear Days
waers LIKE bsid-waers,
blart LIKE bsid-blart,
zuonr LIKE bsid-zuonr,
END OF i_final.
DATA: BEGIN OF i_last OCCURS 0,
kunnr LIKE vbak-kunnr,
inv_chk LIKE bsid-xblnr, " invoice/check/wire transfer no
bldat LIKE bsid-bldat,
xblnr LIKE bsid-xblnr,
inv_date LIKE vbrk-fkdat,
name_c(50), " Partner Last name
vtext LIKE t179t-vtext,
zzihrez_e LIKE vbap-zzihrez_e,
plant LIKE t001w-name1,
vvtext LIKE tvzbt-vtext,
total TYPE netwr_ak, " Row Total
days(5) , " No of Arrear Days
waers LIKE bsid-waers,
blart LIKE bsid-blart,
zuonr LIKE bsid-zuonr,
END OF i_last.
DATA: i_bsik LIKE bsik OCCURS 0 WITH HEADER LINE.
DATA: itab_temp LIKE itab OCCURS 100 WITH HEADER LINE.
DATA:
BEGIN OF itab_details OCCURS 0,
bukrs LIKE bsid-bukrs, " Company code
xblnr LIKE bsid-xblnr,
gjahr LIKE bsid-gjahr,
belnr LIKE bsid-belnr,
kunnr LIKE bsid-kunnr,
END OF itab_details.
DATA: BEGIN OF x_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
name2 LIKE kna1-name2,
ptext LIKE tpfkt-vtext,
street LIKE adrc-street,
ort01 LIKE kna1-ort01,
regio LIKE kna1-regio,
pstlz LIKE kna1-pstlz,
landx LIKE t005t-landx,
agdate LIKE sy-datum, " aging date
END OF x_kna1.
DATA: BEGIN OF i_total OCCURS 0,
waers LIKE bsid-waers,
00_30 TYPE netwr_ak,
31_60 TYPE netwr_ak,
61_90 TYPE netwr_ak,
91_120 TYPE netwr_ak,
120pls TYPE netwr_ak,
total TYPE netwr_ak,
END OF i_total.
DATA: i_ssfcrescl TYPE ssfcrescl.
DATA: i_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: i_ssfctrlop LIKE ssfctrlop OCCURS 0 WITH HEADER LINE.
DATA: v_itcpo LIKE itcpo.
DATA: BEGIN OF itab_vender OCCURS 0,
vender LIKE kna1-kunnr,
END OF itab_vender.
DATA: BEGIN OF ioutput OCCURS 0,
kunnr LIKE vbrk-kunrg,
kname(50),
email(50),
error(1),
END OF ioutput.
DATA: vv_text(90).
Structures *
DATA: x_item LIKE rfposxext.
DATA: x_t001 LIKE t001.
DATA: x_bsegp LIKE bsegp.
Variables *
DATA: v_count TYPE i.
DATA: v_dialog TYPE c VALUE 'X'.
DATA: v_name1 LIKE kna1-name1,
v_name2 LIKE kna1-name2,
v_print LIKE tsp03l-padest,
v_formname(20),
v_flag.
DATA: f_recap_report(1) TYPE c. " Flag for recap report
DATA:
BEGIN OF x_amt,
amt00_ls LIKE bsid-wrbtr,
00_30 LIKE bsid-wrbtr,
31_60 LIKE bsid-wrbtr,
61_90 LIKE bsid-wrbtr,
91_120 LIKE bsid-wrbtr,
120pls LIKE bsid-wrbtr,
END OF x_amt.
DATA: BEGIN OF itab_bill OCCURS 0,
vbeln LIKE vbfa-vbeln,
fplnr LIKE vbfa-fplnr,
fpltr LIKE vbfa-fpltr,
END OF itab_bill.
DATA: v_sdate LIKE vbrk-fkdat,
v_edate LIKE vbrk-fkdat,
v_order(10) TYPE n.
DATA: v_eddate(10), v_stdate(10).
DATA: v_num TYPE i,
v_stat,
v_bill_prd(24),
v_counter TYPE c.
DATA: v_matnr LIKE vbrp-matnr,
v_arktx LIKE vbrp-arktx,
v_vbeln LIKE vbrp-vbeln,
v_vvtext LIKE t176t-vtext,
v_posnr LIKE vbap-posnr,
v_kunnr_c LIKE vbak-kunnr,
v_name_c(50),
v_inv_date LIKE vbrk-fkdat,
v_vdatu LIKE vbak-vdatu,
v_auart LIKE vbak-auart,
v_prctr LIKE vbap-prctr,
v_zzihrez LIKE vbap-zzihrez_e,
v_plant LIKE t001w-name1,
p_form TYPE tdsfname,
fm_name TYPE rs38l_fnam.
DATA: i_ssfcompop TYPE ssfcompop OCCURS 0." WITH HEADER LINE.
DATA: addr_no LIKE kna1-adrnr,
last_name LIKE kna1-name1,
first_name LIKE kna1-name1,
pafkt LIKE knvk-pafkt,
lang LIKE knvk-parla,
v_land LIKE adrc-country,
v_lines TYPE i.
DATA: v_tabix LIKE sy-tabix, v_gjahr LIKE bsid-gjahr,
v_kunnr LIKE vbak-kunnr, v_prodh LIKE vbap-prodh,
v_vtext LIKE t179t-vtext.
DATA: spno LIKE tsp01-rqident,
mi_bytecount TYPE i,
mstr_print_parms LIKE pri_params,
downfile(128) VALUE 'c:\customer.pdf',
mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE.
DATA: packing_list TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
contents_txt TYPE TABLE OF solisti1 WITH HEADER LINE,
v_email LIKE adr6-smtp_addr,
v_returncode,
contents_hex TYPE TABLE OF solix," WITH HEADER LINE,
w_contents_hex TYPE solix ,
receivers TYPE TABLE OF somlreci1 WITH HEADER LINE.
DATA: att_pos TYPE i.
DATA: document_data LIKE sodocchgi1.
DATA: esubject LIKE sood1-objdes. "subject line
DATA: emsgs TYPE TABLE OF solisti1 WITH HEADER LINE.
DATA: pdf TYPE TABLE OF tline WITH HEADER LINE.
DATA: BEGIN OF itext OCCURS 200,
text(132),
END OF itext.
DATA: i_fields LIKE sval OCCURS 0 WITH HEADER LINE.
DATA: v_ccemail LIKE adr6-smtp_addr,
v_check,
v_kname(50).
DATA: otf_data1 LIKE itcoo OCCURS 0 WITH HEADER LINE,
i_itcpp LIKE itcpp.
*FIELD-GROUPS: HEADER, ...
FIELD-GROUPS: header,
details.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK a10 WITH FRAME TITLE text-sa1.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-sa1.
PARAMETERS : p_ex_ic AS CHECKBOX DEFAULT 'X'. "R3DK906903
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01.
SELECT-OPTIONS : s_kunnr FOR bsid-kunnr,
s_bukrs FOR t001-bukrs OBLIGATORY.
PARAMETERS : p_bdate LIKE sy-datum OBLIGATORY.
PARAMETERS: p_vender AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-s11.
PARAMETERS : r_group RADIOBUTTON GROUP r1,
r_comp RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-s13.
PARAMETERS: p_print LIKE tsp03l-lname MATCHCODE OBJECT prin
OBLIGATORY DEFAULT 'locl'.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s14.
PARAMETERS: v_immed AS CHECKBOX DEFAULT 'X',
v_dele AS CHECKBOX DEFAULT 'X',
ch_email AS CHECKBOX.
*PARAMETERS:ch_down AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF BLOCK a10.
AT SELECTION-SCREEN.
Selection Screen Validation.
PERFORM validate_selection_screen.
INITIALIZATION.
INITIALIZATION.
IF sy-sysid NE 'R3P'.
v_email = .
ENDIF.
START-OF-SELECTION.
START-OF-SELECTION.
IF p_vender = 'X'.
Fetch data from BSIK .
PERFORM fetch_data_vender.
Get Arrear Days
PERFORM get_arrear_days_vender.
ENDIF.
Fetch data from BSID and BSAD.
PERFORM fetch_data_from_bsid.
Get Arrear Days
PERFORM get_arrear_days.
Format Data as per selection.
PERFORM format_final_data.
Print sapscript
SORT i_last BY kunnr days DESCENDING.
LOOP AT i_last.
AT NEW kunnr.
CLEAR: i_final, x_kna1.
REFRESH: i_final, x_kna1.
PERFORM get_address.
PERFORM get_total.
ENDAT.
MOVE-CORRESPONDING i_last TO i_final.
i_final-xblnr = i_final-zuonr.
APPEND i_final.
CLEAR i_final.
AT END OF kunnr.
SORT i_final BY days DESCENDING inv_chk total DESCENDING.
PERFORM smart_from.
ENDAT.
ENDLOOP.
END-OF-SELECTION.
END-OF-SELECTION.
*& Form FETCH_DATA_FROM_BSID
text
FORM fetch_data_from_bsid.
fetch data from BSID into Internal table I_BSID.
SELECT *
FROM bsid
INTO TABLE i_bsid
WHERE bukrs IN s_bukrs AND
kunnr IN s_kunnr AND
budat LE p_bdate ."AND
BELNR in ('0090000231','1400000131').
Fetch data from BSAD into Internal table I_BSID.
SELECT *
FROM bsad
APPENDING TABLE i_bsid
WHERE bukrs IN s_bukrs AND
kunnr IN s_kunnr AND
budat LE p_bdate AND
augdt GT p_bdate." AND
DELETE i_bsid WHERE ( bukrs = '1500' OR bukrs = '3000' OR
bukrs = '1400' ) AND
( umsks = 'E' OR umskz = 'E' ).
*Exclude intercompany customers
IF p_ex_ic = 'X'.
DELETE i_bsid WHERE kunnr+0(2) EQ 'IC'.
ENDIF.
CLEAR sy-tfill.
DESCRIBE TABLE i_bsid LINES sy-tfill.
IF sy-tfill = 0.
MESSAGE i999 WITH ' No data selected for the selection Condition'.
STOP.
ENDIF.
ENDFORM. " FETCH_DATA_FROM_BSID
*& Form Get_Arrear_Days
text
FORM get_arrear_days.
SORT i_bsid BY bukrs belnr.
LOOP AT i_bsid.
for company code 1500 and 3000
IF i_bsid-bukrs EQ '1500' OR i_bsid-bukrs EQ '3000'.
MOVE i_bsid-xblnr TO i_bsid-belnr.
ENDIF.
MOVE i_bsid-bukrs TO itab_details-bukrs.
MOVE i_bsid-xblnr TO itab_details-xblnr.
MOVE i_bsid-belnr TO itab_details-belnr.
MOVE i_bsid-gjahr TO itab_details-gjahr.
MOVE i_bsid-kunnr TO itab_details-kunnr.
APPEND itab_details.
CLEAR itab_details.
CLEAR x_item.
AT NEW bukrs.
READ TABLE i_bsid INDEX sy-tabix.
CLEAR x_t001.
SELECT SINGLE * FROM t001
INTO x_t001
WHERE bukrs = i_bsid-bukrs.
ENDAT.
for company code 1500 and 3000 .
IF i_bsid-bukrs EQ '1500' OR i_bsid-bukrs EQ '3000'.
MOVE i_bsid-xblnr TO i_bsid-belnr.
ENDIF.
MOVE-CORRESPONDING i_bsid TO x_item.
x_item-koart = 'D'. " Debitor - Customer Indicator
x_item-konto = bsid-kunnr. " Debitor - Customer Number
x_item-dmshb = bsid-dmbtr.
x_item-wrshb = bsid-wrbtr.
Function module to get ARREAR days.
CALL FUNCTION 'ITEM_DERIVE_FIELDS'
EXPORTING
s_t001 = x_t001
s_bsegp = x_bsegp
key_date = p_bdate
CHANGING
s_item = x_item
EXCEPTIONS
bad_input = 1
OTHERS = 2.
IF sy-subrc = 0.
Populate I_TEMP_DATA for further processing.
i_temp_data-bukrs = i_bsid-bukrs.
i_temp_data-kunnr = i_bsid-kunnr.
i_temp_data-belnr = i_bsid-belnr.
i_temp_data-bldat = i_bsid-bldat.
i_temp_data-shkzg = i_bsid-shkzg.
i_temp_data-zfbdt = i_bsid-zfbdt.
i_temp_data-zterm = i_bsid-zterm.
i_temp_data-vbeln = i_bsid-vbeln.
i_temp_data-waers = i_bsid-waers.
IF x_item-verzn < 0.
x_item-verzn = 0.
ENDIF.
i_temp_data-zuonr = i_bsid-zuonr.
i_temp_data-days = x_item-verzn.
i_temp_data-gjahr = i_bsid-gjahr.
i_temp_data-kidno = i_bsid-kidno.
i_temp_data-rebzg = i_bsid-rebzg.
i_temp_data-xblnr = i_bsid-xblnr.
i_temp_data-sgtxt = i_bsid-sgtxt.
Changing the Sign
IF i_bsid-shkzg = 'H'.
i_temp_data-dmbe2 = i_temp_data-dmbe2 + ( -1 * i_bsid-dmbe2 ).
i_temp_data-dmbtr = i_temp_data-dmbtr + ( -1 * i_bsid-dmbtr ).
ELSE.
i_temp_data-dmbe2 = i_temp_data-dmbe2 + i_bsid-dmbe2.
i_temp_data-dmbtr = i_temp_data-dmbtr + i_bsid-dmbtr.
ENDIF.
i_temp_data-blart = i_bsid-blart.
*for doc type DR
IF i_bsid-blart = 'DR' AND i_bsid-bschl = '01'.
IF i_bsid-sgtxt IS INITIAL.
*Changed our phone number to
MOVE 'Contact Flightsafety' TO i_temp_data-vtext.
ELSE.
MOVE i_bsid-sgtxt TO i_temp_data-vtext.
MOVE 'Financial Invoice' TO i_temp_data-vvtext.
ENDIF.
ENDIF.
*for doc type AB
IF i_bsid-blart = 'AB' AND
( i_bsid-bschl GE '01' AND i_bsid-bschl LE '19' ).
i_temp_data-bldat = i_bsid-zfbdt.
i_temp_data-xblnr = i_bsid-vbeln.
IF NOT i_bsid-sgtxt IS INITIAL.
*Changed our phone nuber to
MOVE 'Contact Flightsafety' TO i_temp_data-vtext.
MOVE i_bsid-sgtxt TO i_temp_data-vtext.
MOVE 'Financial Doc' TO i_temp_data-vvtext.
ELSE.
MOVE i_bsid-sgtxt TO i_temp_data-vtext.
MOVE 'Financial Doc' TO i_temp_data-vvtext.
ENDIF.
ENDIF.
*for doc type DG
IF i_bsid-blart = 'DG' AND
( i_bsid-bschl GE '01' AND i_bsid-bschl LE '19' ).
i_temp_data-bldat = i_bsid-zfbdt.
i_temp_data-xblnr = i_bsid-vbeln.
IF i_bsid-sgtxt IS INITIAL.
*Changed our phone nuber to
MOVE 'Contact Flightsafety' TO i_temp_data-vtext.
ELSE.
MOVE i_bsid-sgtxt TO i_temp_data-vtext.
MOVE 'Financial Doc' TO i_temp_data-vvtext.
ENDIF.
ENDIF.
*To display Debit memo and credit memo.
IF i_bsid-blart = 'DG'.
IF ( i_bsid-bschl GE '11' AND i_bsid-bschl LE '19' ).
MOVE 'Credit Memo' TO i_temp_data-vvtext.
ELSEIF ( i_bsid-bschl GE '01' AND i_bsid-bschl LE '09' ).
MOVE 'Debit Memo' TO i_temp_data-vvtext.
ENDIF.
ENDIF.
*for doc type DZ
IF i_bsid-blart = 'DZ' AND
( i_bsid-bschl GE '01' AND i_bsid-bschl LE '19' ).
IF i_bsid-sgtxt IS INITIAL.
*changed our phone number to
MOVE 'Contact Flightsafety' TO i_temp_data-vtext.
ELSE.
MOVE i_bsid-sgtxt TO i_temp_data-vtext.
MOVE 'Cust Pmt' TO i_temp_data-vvtext.
ENDIF.
ENDIF.
*Document type DZ and posting key 15
IF i_bsid-blart = 'DZ' AND
i_bsid-bschl EQ '15'.
MOVE 'Cust Pmt' TO i_temp_data-vvtext.
ENDIF.
*Document type DZ and posting key 06.
IF i_bsid-blart = 'DZ' AND
i_bsid-bschl EQ '06'.
MOVE 'Debit' TO i_temp_data-vvtext.
ENDIF.
*Document type DA and posting key 04, 14.
IF i_bsid-blart = 'DA' AND
i_bsid-bschl EQ '04' OR
i_bsid-bschl EQ '14'.
MOVE 'Cust Pmt' TO i_temp_data-vvtext.
MOVE i_bsid-sgtxt TO i_temp_data-vtext.
IF i_bsid-sgtxt IS INITIAL.
MOVE 'Contact Flightsafety' TO i_temp_data-vtext.
ENDIF.
ENDIF.
ENDIF.
*billing period
IF i_bsid-blart = 'RV' AND i_bsid-bschl = '01'.
PERFORM billing_period USING i_temp_data-belnr
i_temp_data-vbeln.
ENDIF.
AT END OF belnr.
at end of zuonr.
APPEND i_temp_data.
CLEAR i_temp_data.
ENDAT.
ENDLOOP.
PERFORM material_details.
ENDFORM. " Get_Arrear_Days
*& Form FORMAT_FINAL_DATA
text
FORM format_final_data.
PERFORM pop_format_grp_curr_detail.
CLEAR: itab_temp, i_total.
REFRESH: itab_temp, i_total.
itab_temp] = itab[.
CLEAR itab.
REFRESH itab.
LOOP AT itab_temp.
CLEAR itab.
itab = itab_temp.
CLEAR: itab-matnr.
IF itab-belnr+0(2) = '14'.
*Adding two 00 for the left alignment.
CONCATENATE '00' itab-xblnr
INTO itab-inv_chk.
CONDENSE itab-inv_chk NO-GAPS.
itab-inv_chk = itab-xblnr.
itab-xblnr = itab-belnr.
ELSE.
itab-inv_chk = itab-belnr.
ENDIF.
COLLECT itab.
ENDLOOP.
CLEAR v_stat.
SORT itab BY days inv_chk total DESCENDING.
LOOP AT itab.
*To display Aging totals in usd (if v_stat ne f) for
*company code 1100,1300,2000.
IF itab-bukrs NE '1100' AND
itab-bukrs NE '1300' AND
itab-bukrs NE '2000'.
v_stat = 'F'.
ENDIF.
CLEAR: i_last-vvtext, tvzbt.
MOVE-CORRESPONDING itab TO i_last.
APPEND i_last.
CLEAR i_last.
ENDLOOP.
ENDFORM. " FORMAT_FINAL_DATA
*& Form POP_FORMAT_grp_CURR_DETAIL
text
FORM pop_format_grp_curr_detail.
Populating the Final Internal table for report by Group Currency.
CLEAR x_amt.
SORT i_temp_data.
LOOP AT i_temp_data.
CLEAR: v_count.
IF i_temp_data-sgtxt+0(10) = 'Spcfy in p'.
i_temp_data-sgtxt = i_temp_data-sgtxt+32(18).
MOVE i_temp_data-sgtxt TO i_temp_data-vtext.
MODIFY i_temp_data.
ENDIF.
IF r_comp = 'X'.
IF i_temp_data-days LT 0.
x_amt-amt00_ls = x_amt-amt00_ls + i_temp_data-dmbtr.
If between 1 and 30 Days.
ELSEIF i_temp_data-days GE 0 AND i_temp_data-days LE 30.
x_amt-00_30 = x_amt-00_30 + i_temp_data-dmbtr.
If between 31 and 60 Days.
ELSEIF i_temp_data-days GE 31 AND i_temp_data-days LE 60.
x_amt-31_60 = x_amt-31_60 + i_temp_data-dmbtr.
if between 61 and 90
ELSEIF i_temp_data-days GE 61 AND i_temp_data-days LE 90.
x_amt-61_90 = x_amt-61_90 + i_temp_data-dmbtr.
if between 91 and 120
ELSEIF i_temp_data-days GE 91 AND i_temp_data-days LE 120.
x_amt-91_120 = x_amt-91_120 + i_temp_data-dmbtr.
if > 120
ELSEIF i_temp_data-days GT 120.
x_amt-120pls = x_amt-120pls + i_temp_data-dmbtr.
ENDIF.
ELSE.
if the group currency is selected
IF i_temp_data-days LT 0.
x_amt-amt00_ls = x_amt-amt00_ls + i_temp_data-dmbe2.
If between 1 and 30 Days.
ELSEIF i_temp_data-days GE 0 AND i_temp_data-days LE 30.
x_amt-00_30 = x_amt-00_30 + i_temp_data-dmbe2.
If between 31 and 60 Days.
ELSEIF i_temp_data-days GE 31 AND i_temp_data-days LE 60.
x_amt-31_60 = x_amt-31_60 + i_temp_data-dmbe2.
if between 61 and 90
ELSEIF i_temp_data-days GE 61 AND i_temp_data-days LE 90.
x_amt-61_90 = x_amt-61_90 + i_temp_data-dmbe2.
if between 91 and 120
ELSEIF i_temp_data-days GE 91 AND i_temp_data-days LE 120.
x_amt-91_120 = x_amt-91_120 + i_temp_data-dmbe2.
if > 120
ELSEIF i_temp_data-days GT 120.
x_amt-120pls = x_amt-120pls + i_temp_data-dmbe2.
ENDIF.
ENDIF.
Get Customer Name.
SELECT SINGLE name1
INTO itab-name1
FROM kna1
WHERE kunnr = i_temp_data-kunnr.
Invoice and year
AT END OF rebzg.
READ TABLE i_temp_data INDEX sy-tabix.
itab-zuonr = i_temp_data-zuonr.
itab-bukrs = i_temp_data-bukrs.
itab-kunnr = i_temp_data-kunnr.
itab-belnr = i_temp_data-belnr.
itab-gjahr = i_temp_data-gjahr.
IF r_comp EQ 'X'.
itab-waers = i_temp_data-waers.
ELSE.
itab-waers = 'USD'.
ENDIF.
itab-zfbdt = i_temp_data-zfbdt.
itab-zterm = i_temp_data-zterm.
itab-amt00_30 = x_amt-amt00_ls + x_amt-00_30.
itab-amt31_60 = x_amt-31_60.
itab-amt61_90 = x_amt-61_90.
itab-amt91_120 = x_amt-91_120.
itab-amt120pls = x_amt-120pls.
itab-total = x_amt-amt00_ls + x_amt-00_30 +
x_amt-31_60 + x_amt-61_90 +
x_amt-91_120 + x_amt-120pls.
itab-kunnr_c = i_temp_data-kunnr_c.
itab-name_c = i_temp_data-name_c.
itab-kidno = i_temp_data-kidno.
itab-matnr = i_temp_data-matnr.
itab-inv_date = i_temp_data-inv_date.
itab-rebzg = i_temp_data-rebzg.
itab-xblnr = i_temp_data-xblnr.
itab-vtext = i_temp_data-vtext.
itab-sgtxt = i_temp_data-sgtxt.
itab-days = i_temp_data-days.
itab-bldat = i_temp_data-bldat.
itab-vvtext = i_temp_data-vvtext.
itab-zzihrez_e = i_temp_data-zzihrez_e.
itab-blart = i_temp_data-blart.
itab-plant = i_temp_data-plant.
Populating table.
APPEND: itab.
CLEAR : itab,
x_amt.
v_count = 1.
ENDAT.
IF v_count NE 1.
itab-zuonr = i_temp_data-zuonr.
itab-bukrs = i_temp_data-bukrs.
itab-kunnr = i_temp_data-kunnr.
itab-belnr = i_temp_data-belnr.
itab-gjahr = i_temp_data-gjahr.
itab-bldat = i_temp_data-bldat.
IF r_comp EQ 'X'.
itab-waers = i_temp_data-waers.
ELSE.
itab-waers = 'USD'.
ENDIF.
itab-zfbdt = i_temp_data-zfbdt.
itab-zterm = i_temp_data-zterm.
itab-kunnr_c = i_temp_data-kunnr_c.
itab-name_c = i_temp_data-name_c.
itab-kidno = i_temp_data-kidno.
itab-matnr = i_temp_data-matnr.
itab-inv_date = i_temp_data-inv_date.
itab-rebzg = i_temp_data-rebzg.
itab-xblnr = i_temp_data-xblnr.
itab-vtext = i_temp_data-vtext.
itab-sgtxt = i_temp_data-sgtxt.
itab-days = i_temp_data-days.
itab-zzihrez_e = i_temp_data-zzihrez_e.
itab-plant = i_temp_data-plant.
itab-vvtext = i_temp_data-vvtext.
itab-blart = i_temp_data-blart.
IF itab-matnr NE space.
APPEND itab.
CLEAR itab-plant.
ELSE.
ON CHANGE OF i_temp_data-kidno.
READ TABLE i_temp_data INDEX sy-tabix.
itab-zuonr = i_temp_data-zuonr.
itab-bukrs = i_temp_data-bukrs.
itab-kunnr = i_temp_data-kunnr.
itab-belnr = i_temp_data-belnr.
itab-gjahr = i_temp_data-gjahr.
itab-bldat = i_temp_data-bldat.
IF r_comp EQ 'X'.
itab-waers = i_temp_data-waers.
ELSE.
itab-waers = 'USD'.
ENDIF.
itab-zfbdt = i_temp_data-zfbdt.
itab-zterm = i_temp_data-zterm.
itab-amt00_30 = x_amt-amt00_ls + x_amt-00_30.
itab-amt31_60 = x_amt-31_60.
itab-amt61_90 = x_amt-61_90.
itab-amt91_120 = x_amt-91_120.
itab-amt120pls = x_amt-120pls.
itab-total = x_amt-amt00_ls + x_amt-00_30 +
x_amt-31_60 + x_amt-61_90 +
x_amt-91_120 + x_amt-120pls.
itab-kunnr_c = i_temp_data-kunnr_c.
itab-name_c = i_temp_data-name_c.
itab-kidno = i_temp_data-kidno.
itab-matnr = i_temp_data-matnr.
itab-inv_date = i_temp_data-inv_date.
itab-rebzg = i_temp_data-rebzg.
itab-xblnr = i_temp_data-xblnr.
itab-vtext = i_temp_data-vtext.
itab-sgtxt = i_temp_data-sgtxt.
itab-days = i_temp_data-days.
itab-zzihrez_e = i_temp_data-zzihrez_e.
itab-vvtext = i_temp_data-vvtext.
itab-plant = i_temp_data-plant.
APPEND itab.
CLEAR: x_amt-amt00_ls, x_amt-00_30, x_amt-31_60,
x_amt-61_90, x_amt-91_120 , x_amt-120pls.
ENDON.
ENDIF.
CLEAR: itab.
ENDIF.
ENDLOOP.
ENDFORM. " POP_FORMAT_grp_CURR_DETAIL
*& Form material_details
text
--> p1 text
<-- p2 text
FORM material_details.
SORT itab_details.
DELETE ADJACENT DUPLICATES FROM itab_details.
LOOP AT itab_details.
CLEAR: v_counter, v_gjahr, v_kunnr, v_prodh, v_vbeln,
v_vvtext, v_vtext.
v_gjahr = itab_details-gjahr.
v_kunnr = itab_details-kunnr.
*Invoice Date/Billing date
SELECT SINGLE fkdat FROM vbrk INTO v_inv_date
WHERE vbeln = itab_details-xblnr.
*material number, description and product hierarchy
SELECT matnr arktx prodh FROM vbrp
INTO (v_matnr, v_arktx, v_prodh)
WHERE vbeln = itab_details-xblnr AND
uepos = '00000'.
CLEAR: v_vdatu, v_posnr, v_auart, v_prctr, v_zzihrez,
v_kunnr_c, v_name1, v_name2, v_vtext, v_vvtext.
*Find the contract/order no
SELECT SINGLE vbelv posnv FROM vbfa INTO (v_vbeln, v_posnr)
WHERE vbeln = itab_details-xblnr
AND vbtyp_v IN ('C','G').
*delivery date, document type, plant and reservation no
SELECT SINGLE vbakvdatu vbakauart vbapprctr vbapzzihrez_e
INTO (v_vdatu, v_auart, v_prctr, v_zzihrez)
FROM vbak INNER JOIN vbap ON vbakvbeln = vbapvbeln
WHERE vbap~vbeln = v_vbeln AND
vbap~posnr = v_posnr AND
vbap~abgru = space.
*billing type
SELECT SINGLE * FROM vbkd WHERE vbeln = v_vbeln.
IF vbkd-bsark NE 'ZG01' OR vbkd-bsark NE 'ZO02'.
SELECT SINGLE vtext FROM t176t INTO v_vvtext
WHERE bsark = vbkd-bsark
AND spras EQ sy-langu.
ELSE.
MOVE 'One Time' TO v_vvtext.
ENDIF.
*getting only the reservation number (no text)
IF vbkd-ihrez_e+0(11) CO
'0123456789'.
ELSE.
v_zzihrez = space.
ENDIF.
*location
CONCATENATE '000000' v_zzihrez+0(4) INTO v_prctr.
*plant name
CLEAR v_plant.
SELECT SINGLE ktext FROM cepct INTO v_plant WHERE
prctr = v_prctr AND
spras = sy-langu.
*client no and name
SELECT SINGLE vbpakunnr kna1name1 kna1~name2
INTO (v_kunnr_c, v_name1, v_name2)
FROM vbpa INNER JOIN kna1 ON
vbpakunnr = kna1kunnr
WHERE vbpa~vbeln = v_vbeln AND
vbpa~parvw = 'Z3'.
CONCATENATE v_name1 v_name2 INTO v_name_c
SEPARATED BY space.
READ TABLE i_temp_data WITH KEY bukrs = itab_details-bukrs
belnr = itab_details-belnr
gjahr = itab_details-gjahr.
IF sy-subrc = 0.
CLEAR: v_tabix.
v_tabix = sy-tabix.
IF v_counter IS INITIAL.
MOVE v_plant TO i_temp_data-plant.
MOVE v_zzihrez TO i_temp_data-zzihrez_e.
MOVE v_kunnr_c TO i_temp_data-kunnr_c.
MOVE v_name_c TO i_temp_data-name_c.
MOVE v_gjahr TO i_temp_data-gjahr.
MOVE v_kunnr TO i_temp_data-kunnr.
IF v_auart EQ 'ZOTO' AND i_temp_data-inv_date IS INITIAL.
MOVE v_inv_date TO i_temp_data-inv_date.
ELSEIF i_temp_data-inv_date IS INITIAL.
MOVE v_vdatu TO i_temp_data-inv_date.
ENDIF.
IF i_temp_data-vtext IS INITIAL.
MOVE v_arktx TO i_temp_data-vtext.
ENDIF.
IF i_temp_data-vvtext IS INITIAL.
MOVE v_vvtext TO i_temp_data-vvtext.
ENDIF.
MODIFY i_temp_data INDEX v_tabix.
CLEAR i_temp_data.
v_counter = 'T'.
CLEAR: v_matnr,v_arktx,v_vbeln,v_name_c,v_vtext, v_prodh,
v_kunnr_c, v_name1,v_name2, v_vdatu, v_vvtext.
ELSE.
CLEAR:i_temp_data-dmbe2, i_temp_data-dmbtr. " i_temp_data-wrbtr
MOVE v_matnr TO i_temp_data-matnr.
MOVE v_plant TO i_temp_data-plant.
MOVE v_zzihrez TO i_temp_data-zzihrez_e.
MOVE v_kunnr_c TO i_temp_data-kunnr_c.
MOVE v_name_c TO i_temp_data-name_c.
MOVE v_gjahr TO i_temp_data-gjahr.
MOVE v_kunnr TO i_temp_data-kunnr.
IF v_auart EQ 'ZOTO' AND i_temp_data-inv_date IS INITIAL.
MOVE v_inv_date TO i_temp_data-inv_date.
ELSEIF i_temp_data-inv_date IS INITIAL.
MOVE v_vdatu TO i_temp_data-inv_date.
ENDIF.
MOVE v_arktx TO i_temp_data-vtext.
APPEND i_temp_data.
CLEAR i_temp_data.
ENDIF.
ENDIF.
ENDSELECT.
CLEAR:
i_temp_data-kunnr_c,
i_temp_data-name_c,i_temp_data-inv_date,
i_temp_data-vtext.
CLEAR: v_matnr,v_arktx,v_vbeln,v_name_c,
v_kunnr_c, v_name1,v_name2,v_inv_date, v_vdatu,
v_vtext, v_prodh.
ENDLOOP.
ENDFORM. " material_details
*& Form get_address
text
FORM get_address.
Get Address
CLEAR: kna1, x_kna1, first_name, last_name,pafkt, lang, v_land.
SELECT SINGLE * FROM kna1 INTO kna1 WHERE kunnr = i_last-kunnr.
SELECT SINGLE name1 namev pafkt parla FROM knvk
INTO (last_name, first_name, pafkt, lang)
WHERE kunnr = i_last-kunnr
AND abtnr = '0003'. "financial department
IF sy-subrc NE 0.
SELECT SINGLE name1 namev pafkt parla FROM knvk
INTO (last_name, first_name, pafkt, lang)
WHERE kunnr = i_last-kunnr.
ENDIF.
IF lang = ' '.
lang = 'E'.
ENDIF.
SELECT SINGLE vtext FROM tpfkt INTO x_kna1-ptext
WHERE pafkt = pafkt
AND spras = lang.
SELECT SINGLE name1 name2 street country FROM
adrc INTO (x_kna1-name1, x_kna1-name2,
x_kna1-street, v_land)
WHERE addrnumber = kna1-adrnr.
SELECT SINGLE landx FROM t005t INTO x_kna1-landx WHERE land1 = v_land
AND spras = lang.
TRANSLATE x_kna1-landx TO UPPER CASE. "#EC SYNTCHAR added by sony
MOVE kna1-kunnr TO x_kna1-kunnr.
MOVE kna1-ort01 TO x_kna1-ort01.
MOVE kna1-regio TO x_kna1-regio.
MOVE kna1-pstlz TO x_kna1-pstlz.
MOVE p_bdate TO x_kna1-agdate.
APPEND x_kna1.
CLEAR: x_kna1.
ENDFORM. " get_addres
*& Form fetch_data_vender
text
--> p1 text
<-- p2 text
FORM fetch_data_vender.
SELECT lifnr FROM kna1 INTO TABLE itab_vender
WHERE kunnr IN s_kunnr.
LOOP AT itab_vender.
Fetch data from BSIK into Internal table I_BSIK.
SELECT *
FROM bsik
APPENDING TABLE i_bsik
WHERE bukrs IN s_bukrs AND
lifnr EQ itab_vender-vender AND
budat LE p_bdate AND
blart IN ('KA', 'KG', 'KR', 'KZ', 'KF').
Fetch data from BSAK into Internal table I_BSAK.
SELECT *
FROM bsak "#EC ENHOK "added by sony 06/05/08
APPENDING TABLE i_bsik
WHERE bukrs IN s_bukrs AND
lifnr EQ itab_vender-vender AND
budat LE p_bdate AND
augdt GT p_bdate AND
blart IN ('KA', 'KG', 'KR', 'KZ', 'KF').
ENDLOOP.
DELETE i_bsik WHERE ( bukrs = '1500' OR bukrs = '3000' ) AND
( umsks = 'E' OR umskz = 'E' ).
ENDFORM. " fetch_data_vender
*& Form GET_ARREAR_DAYS_vender
text
--> p1 text
<-- p2 text
FORM get_arrear_days_vender.
SORT i_bsik BY mandt bukrs belnr.
CLEAR: v_tabix.
LOOP AT i_bsik.
v_tabix = sy-tabix.
SELECT SINGLE * FROM kna1 WHERE lifnr = i_bsik-lifnr.
MOVE i_bsik-bukrs TO itab_details-bukrs.
MOVE i_bsik-xblnr TO itab_details-xblnr.
MOVE i_bsik-belnr TO itab_details-belnr.
MOVE i_bsik-gjahr TO itab_details-gjahr.
MOVE kna1-kunnr TO itab_details-kunnr.
APPEND itab_details.
CLEAR itab_details.
CLEAR x_item.
AT NEW bukrs.
*company code details
READ TABLE i_bsik INDEX sy-tabix.
CLEAR x_t001.
SELECT SINGLE * FROM t001
INTO x_t001
WHERE bukrs = i_bsik-bukrs.
ENDAT.
MOVE-CORRESPONDING i_bsik TO x_item.
x_item-koart = 'D'. " Debitor - Customer Indicator
x_item-konto = kna1-kunnr. " Debitor - Customer Number
x_item-dmshb = bsik-dmbtr.
x_item-wrshb = bsik-wrbtr.
Function module to get ARREAR days.
CALL FUNCTION 'ITEM_DERIVE_FIELDS'
EXPORTING
s_t001 = x_t001
s_bsegp = x_bsegp
key_date = p_bdate
CHANGING
s_item = x_item
EXCEPTIONS
bad_input = 1
OTHERS = 2.
IF sy-subrc = 0.
Populate I_TEMP_DATA for further processing.
i_temp_data-bukrs = i_bsik-bukrs.
i_temp_data-kunnr = kna1-kunnr.
i_temp_data-belnr = i_bsik-belnr.
i_temp_data-bldat = i_bsik-bldat. "Document date in document
i_temp_data-shkzg = i_bsik-shkzg.
i_temp_data-zfbdt = i_bsik-zfbdt. " Base line date
i_temp_data-zterm = i_bsik-zterm. "Terms of payment key
i_temp_data-waers = i_bsik-waers.
i_temp_data-days = x_item-verzn. " days in arrs
i_temp_data-gjahr = i_bsik-gjahr. " year
i_temp_data-kidno = i_bsik-kidno. " Payment Reference
i_temp_data-rebzg = i_bsik-rebzg. " Number of the Invoice the
"Transaction Belongs to
i_temp_data-xblnr = i_bsik-xblnr.
i_temp_data-sgtxt = i_bsik-sgtxt. " Item Text
Changing the Sign
IF i_bsik-shkzg = 'H'.
i_temp_data-dmbe2 = -1 * i_bsik-dmbe2.
i_temp_data-dmbtr = -1 * i_bsik-dmbtr.
ELSE.
i_temp_data-dmbe2 = i_bsik-dmbe2.
i_temp_data-dmbtr = i_bsik-dmbtr.
ENDIF.
ENDIF.
APPEND i_temp_data.
CLEAR i_temp_data.
ENDLOOP.
PERFORM material_details.
ENDFORM. " Get_Arrear_DaysENDFORM.
" GET_ARREAR_DAYS_vender
*& Form convert_pdf
text
--> p1 text
<-- p2 text
FORM convert_pdf.
CLEAR: tsp01.
CLEAR: mtab_pdf, mi_bytecount.
REFRESH mtab_pdf.
FREE mtab_pdf.
***convert to PDF format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
IMPORTING
bin_filesize = mi_bytecount
TABLES
otf = i_otf_final
lines = mtab_pdf
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc 0.
ENDIF.
CONDENSE itab-kunnr NO-GAPS.
CONCATENATE 'C:\' itab-kunnr '_' sy-datum '.pdf' INTO downfile.
IF ch_down = 'X'.
PERFORM download_pdf.
ENDIF.
IF ch_email = 'X'.
PERFORM send_email.
ENDIF.
ENDFORM. " convert_pdf
*& Form download_pdf
text
--> p1 text
<-- p2 text
FORM download_pdf.
DATA: i_downfile TYPE string.
i_downfile = downfile.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = mi_bytecount
filename = i_downfile
filetype = 'BIN'
IMPORTING
FILELENGTH =
TABLES
data_tab = mtab_pdf[]
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc 0.
ENDIF.
ENDFORM. " download_pdf
*& Form send_email
text
--> p1 text
<-- p2 text
FORM send_email.
CLEAR: packing_list[],
pdf[],
contents_txt[],
contents_hex[],
receivers[],
att_pos,
document_data,
esubject,emsgs[],
w_contents_hex.
PERFORM packing_list.
PERFORM set_data.
IF v_check NE 'X'.
PERFORM send_email_message.
ENDIF.
ENDFORM. " send_email
*& Form packing_list
text
--> p1 text
<-- p2 text
FORM packing_list.
Concatenate the PDF material into the attachments table.
PERFORM append_pdf_to_attachments USING mi_bytecount.
Describe the attachment
CLEAR packing_list.
REFRESH packing_list.
packing_list-transf_bin = 'X'.
ADD 1 TO att_pos.
packing_list-body_start = att_pos.
DESCRIBE TABLE contents_hex LINES att_pos.
packing_list-body_num = att_pos.
packing_list-doc_type = 'PDF'.
CONCATENATE 'Statement Date'
sy-datum4(2) '/' sy-datum6(2) '/'
sy-datum+2(2) '-' 'Customer no -' itab-kunnr
INTO packing_list-obj_descr.
packing_list-obj_langu = 'E'.
packing_list-doc_size = mi_bytecount.
APPEND packing_list.
ENDFORM. " packing_list
*& Form set_data
text
--> p1 text
<-- p2 text
FORM set_data.
CLEAR: sy-tfill.
DESCRIBE TABLE contents_hex LINES sy-tfill.
IF sy-tfill GT 0.
DATA: lines TYPE TABLE OF tline WITH HEADER LINE.
By this point, the attachments have been created. Now we supply body
text and set up the recipients.
CONCATENATE 'Customer Statement for Customer - '
itab-kunnr esubject INTO esubject.
The message header information
CLEAR document_data.
document_data-obj_name = 'ZWRAPPER'.
document_data-obj_descr = esubject.
document_data-obj_langu = 'E'.
document_data-obj_prio = '1'.
CLEAR: contents_txt, contents_txt], itext[, itext.
IF sy-sysid NE 'R3P'.
CONCATENATE 'Please ignore this mail. This is part of testing from '
sy-sysid INTO contents_txt SEPARATED BY space.
APPEND contents_txt.
CLEAR: contents_txt.
APPEND contents_txt.
ENDIF.
CLEAR vv_text.
CONCATENATE 'Enter Body of the Email and SAVE it for customer '
itab-kunnr itab-name1 INTO vv_text SEPARATED BY space.
EDITOR-CALL FOR itext TITLE vv_text.
LOOP AT itext.
contents_txt = itext-text.
APPEND contents_txt.
ENDLOOP.
Describe the body data. This descriptor has to be the first, in front
of all the attachments.
CLEAR packing_list.
packing_list-transf_bin = space.
packing_list-body_start = 1.
DESCRIBE TABLE contents_txt LINES packing_list-body_num.
packing_list-doc_type = 'RAW'.
packing_list-obj_langu = 'E'.
INSERT packing_list INDEX 1.
Set up the recipients.
CLEAR: receivers, receivers[], sy-tfill.
CLEAR: usr21, adr6.
*find email address.
IF sy-sysid = 'R3P'.
SELECT prsnr FROM knvk INTO knvk-prsnr WHERE kunnr = itab-kunnr.
SELECT SINGLE adrnr name1 name2 FROM kna1 INTO
(kna1-adrnr, kna1-name1, kna1-name2)
WHERE kunnr = itab-kunnr.
SELECT SINGLE smtp_addr INTO v_email FROM adr6
WHERE addrnumber EQ kna1-adrnr.
IF sy-subrc NE 0.
CLEAR: v_email.
ELSE.
EXIT.
ENDIF.
ENDSELECT.
ENDIF.
*find the user email address.
CLEAR: usr21, adr6.
SELECT SINGLE * FROM usr21 WHERE bname = sy-uname.
CLEAR adr6.
SELECT SINGLE * FROM adr6 WHERE addrnumber = usr21-addrnumber AND
persnumber = usr21-persnumber.
v_ccemail = adr6-smtp_addr.
CLEAR:i_fields.
REFRESH:i_fields.
i_fields-tabname = 'COMPMSG'.
i_fields-fieldname = 'TEXT'.
i_fields-fieldtext = 'Email'.
i_fields-value = v_email.
APPEND i_fields.
CLEAR i_fields.
i_fields-tabname = 'T100'.
i_fields-fieldname = 'TEXT'.
i_fields-fieldtext = 'CC to'.
i_fields-value = v_ccemail.
APPEND i_fields.
CLEAR i_fields.
CLEAR v_returncode.
CALL FUNCTION 'POPUP_GET_VALUES'
EXPORTING
popup_title = 'Email Address.'
start_column = '25'
start_row = '2'
IMPORTING
returncode = v_returncode
TABLES
fields = i_fields
EXCEPTIONS
error_in_fields = 1
OTHERS = 2.
IF sy-subrc 0.
ENDIF.
IF v_returncode NE 'A'.
*find the new condition value (table name and filed name took itfor char
LOOP AT i_fields WHERE tabname = 'COMPMSG' AND fieldname = 'TEXT'.
v_email = i_fields-value.
ENDLOOP.
LOOP AT i_fields WHERE tabname = 'T100'
AND fieldname = 'TEXT'.
v_ccemail = i_fields-value.
ENDLOOP.
ENDIF.
receivers-receiver = v_email.
receivers-rec_type = 'U'. "..assume it's an internet address
APPEND receivers.
receivers-receiver = v_ccemail.
receivers-rec_type = 'U'.
receivers-copy = 'X'.
APPEND receivers.
SORT receivers BY receiver.
DELETE ADJACENT DUPLICATES FROM receivers COMPARING receiver.
ENDIF.
CLEAR: v_check.
IF v_email = space.
v_check = 'X'.
MOVE itab-kunnr TO ioutput-kunnr.
MOVE v_kname TO ioutput-kname.
MOVE v_email TO ioutput-email.
MOVE 'X' TO ioutput-error.

Hi
Looks like BASIS issue.
Pls check the OSS Note - Note 787418 - Sent documents are not readable after upgrade
Pls contact your BASIS person
Regards
MD

.pdf file not opening in Illustrator CS5

All of a sudden, I cannot get ,pdf files to open in Illustrator CS5. what would cause this?
Thanks

Jeremy,
Or you may go further down the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Edit: Hi Steve. Whatever was white is less so now.

PDF File not opening in browser for sharepoint 2010

Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
it always open in browser
I have already made following changes but didn,t work
Set browser file handling to Permissive from central admin
Set "open in browser" in setting s of doc library
Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
Installed Adober eader in client machine
Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

Converting a crystal report to pdf and then opening the pdf automatically

I am successfully exporting a crystal report to a pdf file using code in vb.net 2008 in a windows application.   The crystal report is open in the viewer control and the user presses a button to export it.
I create a variable with the report name and the location.. All works correctly. However, I want the pdf to be open once it is saved which I believe is the case when you create the pdf using the build in crystal export control. But I am not using that.
I presume I could call another form and use the adobe com control, but i prefer to do this in one place.
How can I accomplish this.
Thanks
smHaig

How about if I filter the open dialog box using the pdf name and folder. Then that one would be the only one open in the dialog box and if the user selects it, it would open. Have not tested yet, but this popped into my mind.   Seems better than a button on the form with the crystal view to open another form . Or I could have the adobe com object over laying the cr viewer and just make it visible if they press a button to open the abode file..
Maybe people have tried this and could comment on the better choice to view the pdf
1. call another form that contains the adobe com
2. place the adobe control over the cr viewer and make visible if user requests to see pdf.
3. use a filtered open dialog box.

When i try to open a pdf file it opens as a word document and then a window pops up saying file conv

When I try to open a pdf file it opens with microsoft word which I can't view. Then a window pops up with "file convertion - permissioning.pdf
could you tell me how to rectify this,
Thanks

Your file association is corrupted; reinstalling or repairing Adobe Reader will likely fix it.
If you want to fix it manually, tell us your operating system & version.

How do I get pdf file to open from websites?

When I click on a pdf file to open from a website, Explorer tries to open the pdf, but reloads the page then errors out. I am running XP pro with the Adobe Reader X. I have tried to uninstall reader and re-install. My registry is using the correct file. The associates show reader as the default program. I don't know where else to look.
Thanks for your help.
jdiek

What is your Adobe Reader version and your browser. If you are using Internet Explorer, use it in 32-bit mode.

Are there settings in Acrobat to enable a PDF file to open in Acrobat or Acrobat Reader by Default rather than open in a Browser

Are there settings in Acrobat to enable a PDF file to open in Acrobat or Acrobat Reader by Default rather than open in a Browser

There is a check box in the preference (under edit). I have not had great success with this setting, but that is what it is supposed to do. Don't expect it to happen in Chrome that has it's own PDF viewer (or the preview function on a MAC). You might also check the settings for your particular browser.

All my Adobe Reader (PDF) files are opening only in the secondary monitor by default, as I am workin

I am using Adobe 8 Professional and working on Windows XP. I have been facing an issue lately with opening files in a dual-monitor environment. All my Adobe Reader (PDF) files are opening only in the secondary monitor by default. There are times when I work only in one monitor and when I open a PDF file and want to have a look at it, I have to connect another monitor to view that file, since this file is open in the secondary monitor. It is very disappointing with such instances happening with Adobe (a leading organization). Can you please help so that the Adobe Reader files open in the primary monitor by default?

On a Windows system disable the preview of Windows Explorer.

Can no longer click on pdf files to open in email, websites

Can no longer click on pdf files to open in email, websites, etc. on iMac. Help!
Have updated/reloaded Adobe Reader and Adobe Flash Player. Still no go.
Any Suggestions?

I moved your question to the Adobe Reader forum since you're working on a Mac (not an iPad or iPhone).

Hi, i have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)

hi good morning,
I have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)
can you help us with this problem?

Hi, thanks for the fast response.
This is the Extended Font Pack i have installed on the Terminal server.
what do you mean by properly embedded? how can i check that?
BR
Eric Mizrachi

PDF zoom on opening

Similar Messages

Maybe you are looking for