PDFActions on xMII12. Help needed immediately???

Good Day everyone. I face a problem when trying to deploy PDFActions.jar file in xMII 12. The procedure i followed is ,
1) I created a file called catalog.xml from the PDFComponentCatalog.xml file which presents in xMII 11.5.
2) Then i created the PDFActions.jar file along with the xml file.
3) Used Custom Actions link in System Management and added PDFActions.jar file as the assembly file and iText.jar file as the dependency file. The upload was successful and i deployed without any error.
4) When i open workbench i can see a PDF action block on the left side without images, and when i try to add it to a sequence nothing happens. It is not getting added in sequence and i am not getting any error messages
Can anyone help me out on this?

I guess you've been posting this issue for quite sometime now and inspite of getting hints I am not sure why you are coming up with your own steps to resolve the problem.
SAP note 1109054 has been mentioned probably a number of times before and I would advice you to open it up and read through , carefully , with a relaxed mind , no need to panic (read - Help needed immediately???).
The above mentioned note is for 12.0 SP2 so make sure you are on that version and because there have been no postings/notes for SP3 I would think the note would be applicable for SP3 as well.
If you face any issues after that then raise your doubts.

Similar Messages

Twitter API help needed immediately

I have developed a twitter API in Flash Professional CS4. It works fine when it plays in the flash player locally. But when I publish the file and play it in a browser it asks for settings to be modified. Since those were the local settings I have modified them and played the file in browser and it worked fine.
Now, when I upload the file to server and embed the swf into a html file and try to play it from the server nothing happens. The API doesn't load the feeds from twitter site. The display is always blank. http://sravan313.inz.cc/home.html
Possible solutions I have tried.....
added security code in flash
1st method:
flash.system.Security.allowDomain("*");
flash.system.Security.loadPolicyFile("http://twitter.com/crossdomain.xml");
2nd method:
added the crossdomain.xml policy file from http://twitter.com/crossdomain.xml
3rd method:
followed any of the above methods along with changing the "Access network only" in publish settings.
Can anyone help me with possible solutions???
guys its very urgent!!! I need help immediately.....

Hi Peter
so, what do you really suggest? Can you help me regarding this
? I need this very badly and little bit urgently.... any suggestions
are appreciated.
and Darshan,
Thanks, a lot. Your links were very helpful. Could understand a little bit better about cross domains.

Please, Help NEED immediately, Radeon 9200 Ati on 23" hd cinema display??

Hi you all expert, i definitely need some help here after searching through the site , i still couldn't find the solution. Currently i am operating an old G4 Mac 400 mhz , rage 128 pro, the salesman told me it will support the new 23" hd cinema flat panel display, which he fails me, and after checking up the system requirement the minimum should have been radeon 7500. Anyway, i am contemplating on purchasing a new ati 9200 radeon mac edition (within my budget) and would like to ask if it will support the new 23" hd display sitting in my living room. Please help, thanks a million!!!!!

You should have no problem with this card running the 23'' Cinema. It will indeed

Help Needed immediately

Hi,
I have an text table /bic/tmaterial and an internal table ITAB.
In a function module, i need to get the material numbers of /bic/tmaterial which are not present in ITAB-material(material is a field in internal table ITAB) and for those material no's i need to make an entry in the structure ZSTRUCTURE(which also contains a material no field).
Help me in this abap code to make the above functionality possible.
Please help as soon as possible
Thanks & Regards,
Pra

Hi,
take one temp. internal table which is having the structure like
*/bic/tmaterial *
DATA : BEGIN OF i_itab OCCURS o.
             INCLUDE STRUCTURE /bic/tmaterial .
DATA :     END OF i_itab.
select required fields into i_itab from /bic/tmaterial.
LOOP AT i_itab.
READ TABLE ITAB WITH KEY material = i_itab-material.
    IF sy-subrc NE 0.
     MOVE   i_itab-values to your structure ZSTRUCTURE.
   ENDIF.
ENDLOOP.
CLEAR : i_itab.
FREE i_itab.
Note: you have given that ,moving fields to structure.Structure means
it will hold only one record at a time.

NO Display on BOOT ? HELP NEEDED IMMEDIATELY

Im having a problem on boot as nothing seems to appear once i turn on the system !
I was previously running a 3.0 P4 HT on the same board i.e 875P Neo FIS2R and now i got a new board so i deciced to make a new spare machine so i used the 875P board on the specs below :-
P4 1.8
seagate 40 GB HDD
Ti4200 GPU
Kingston 512 333Mhz Ram
CD rom
The problem now is that nothing appears as i power up the system !
The processor fan is running, the D Bracket shows all 4 green lights, the GPU fan is running ! NB fan is running ! all system fans r running but no display ! :S
I tried another GPU and still nothing happened!! I tried another set of RAMS ! Still nothing.
Could some1 pls tell me what the problem might be cause i tried the CMOS jumper issue but still nothing happeneed !
My PSU rails are mentioned in the SIG as im using the same casing !!! but that shouldnt be an issue cause my previous system was consuming more power as it was running smoothlyy!
I would appreciate if some1 could tell me ASAP what i can do to fix this problem!

the SAME thing happened to an ASUS mobo i had, i rma'd it once and the 2nd board did the same thing, i tried all sorts of ram, 4 different video cards, and all sorts of configurations.
ive never fixed it and that asus P4T board sits in a box until i can find time to mess with it.
hhmm what does the D-bracket show ?
also did you move the J1 jumper over and turn the system on, it says not to but ive found the bios is only cleared when the system is powered on, but you may want to simply move the jumper over,, let it sit for 10 sec, then move the jumper back, if nothing happens, move the jumper to reset,, turn on the system and see what happens.
if THAT dont work,
can you put your old system all back together and make it work ?
no video,, no post/bios beeps. nothing at all.
make VERY sure the cpu is in all the way. make VERY sure the back of the mobo is not touching the backside of the case as this will short out the mobo and generally make it go poof.
unplug all devices and only have video card and ram and cpu in.
no mouse no keyboard.
if you get video, add the mouse,, then the keyboard, 1 device at a time until you get the system to stop booting, you will then know whats causing the problem.
alternately you can pull out the video card and you SHOULD get bios beeps, or the D-Bracket should show that there is no video card.
if nothing happens , no beeps no dbracket when you pull out the video card then the system is crashing prior to video start, which puts you back to cpu, ram, or a power issue. or a blown motherboard.
its also possible that when you did the switch you may have electrostaticlly zapped the mobo, and that my friend is going to require you to RMA the mobo.

Dreamweaver and PHP Help Needed!

If there is anyone out there who can help, I am working with
a back-end secured website that is in php and need to manipulate
and change pageson-the-fly. I'm not sure how to view and actually
see in Design View my PHP page, as I can best work in Design View.
Can anyone help out there?
The website I need help with is
http://www.businesscreditbuilder.com
Help needed as soon as possible...
Thank you...
If you want to help, I can compensate you for helping with an
immediate page..

Thank you for writing. I do need your help, and here's the
scenario. I work for a company that deals with business credit. In
the previous post at
http://www.businesscreditbuilder.com
there is a login. Once logged in, there is a home page for the
members. That first page I need to change as soon as possible for
over 40,000 members. All the members will see the same home page
inside the members area. You're welcome to login as "makaiman",
password is "1143mak" to see the first page that comes inside the
members area I need to change just a little. PHP is installed on a
remote server running on Windows. I need help or guidance on this
immediately but I have to sleep right now as it is 1130pm pacific
and need to have this done by sometime tomorrow morning. I
appreciate all of your help so very much... any advice would be so
much appreciated...
m

T400 - Accidentaly formatted the disk 1 (IMD-0) partition in disk management - Help Needed

Hello,
Initially when I re-formatted my computer to get rid of the factory image, I found that there was a hidden partition of 1.37GB which I could not touch, meaning i could not delete. I ignored it at that time and formatted my computer and reinstalled vista business on it using the license i got from lenovo. Now after some days, I was kind of getting concerned as to what exactly was the 1.37Gb partition on my computer. I guess I was getting worried as to why I was not able to reclaim that space for normal use. Today, I tried to reclaim it, by deleting the volume, thinking it should merge into the unallocated space, that I have on my primary hard drive. But it did not. However, what happened was that this space of 1.37GB did start showing up on My Computer, once I formatted it using NTFS. I then checked its properties in My Computer and it had an option of readyboost. I selected the option which says use this disk for readyboost, and immediately in no time, the disk was full with on 68MB remaining as free space. It also has an icon of readyboost in the drive, when I double-click it. This is when I figured that this space could be on a separate physical disk. I did some research and found out that this drive or device or chip, is listed as Disk-1 in disk management and as IMD-0 under Disk Drives in Device Manager. I googled about it, and found that it was related to the turbo memory. Now, I believe that turbo memory would be a separate flash chip, which would be hardwired to function in a particular way (enabling boosting speeds), and that it would be non-accessible to users from within windows for formatting or doing anything else. Hence, I also believe that the space which I reclaimed, is existing on my primary 320GB hard drive and is used in addition to the turbo memory, as a cache, to boost speeds. However, since I do not understand the turbo memory concept very well, I would really appreciate if someone could explain how the turbo memory works, i.e. including IMD-0 and all that. And the main help I need is on how to hide the 1.37GB partition again, and put it in a format that it was earlier in, and usable for turbo memory. At present I do not know if it is being used by turbo memory or not, but below is the current status of the turbo memory:
1. In Device manager, under disk drives, IMD-0 shows up, and in properties it just says device type -- disk drive. Now I read somewhere that it should say NVCACHE, but it does not say that on my pc, under any tabs of the properties of IMD-0. Can someone help me putting it back there.
2. Under Disk Management, it says Local Disk H:, 1.37GB NTFS, Healthy (Active, Primary Partition). I don't exactly remember, but I guess prior to me formatting it, it said unallocated. Help needed here too.
3. In the Turbo memory controller, it says Windows readyboot enabled, Windows Readydrive enabled, 2GB
and below that I have checkboxes for enabling windows readyboost and readydrive checked.
So guys, can please anyone help me in re-hiding the 1.37GB partition and making it in the state it was before.
Thanks a lot for your help.

Hi Eric,
Please refer the following HP article to expand your array , refer the TechNet article to expand your drive:
HP Proliant Servers - How to Expand an Array and Extend the Logical Drive
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03510253-1%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=4231377&ac.admitted=1411638027623.876444892.199480143
TechNet article:
Extend System/Boot Volume on Windows Server 2008/ Windows Vista/Win7 Beta
http://blogs.technet.com/b/mghazai/archive/2009/02/24/extend-system-boot-volume-on-windows-server-2008-windows-vista-win7-beta.aspx
Extend a simple or spanned volume
http://technet.microsoft.com/en-us/library/cc776741.aspx
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIE

In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help needed! Raid degraded again!

Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!

I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

PDFActions on xMII12. Help needed immediately???

Similar Messages

Maybe you are looking for