PDFMaker Office 2010 fails while creating the PDF

I have a Window 7 laptopn with Office 2010 Adobe Acrobat 8.2.5. Slect create PDF button on tool bar and process starts but hangs while "onverting to PDF". Error occurs in MS Word, Excel & Powerpoint. System has worked fine up unitl a week ago. PDF creation in MS IE 8 have never worked but the Office suite ahs always worked.
Tried rebooting, disbaling and reenabling the PDFMaker ADD-IN in office, downloaded alll the lated Adobe updates.
Anyone any suggestions ?

Hello there,
I'm sorry you're having trouble. Unfortunately, this forum is exclusively for questions about Acrobat.com (www.acrobat.com); we're not able to help with questions about problems with other Adobe products and services. Here are some links that may be more helpful:
Acrobat Help and Support:
www.adobe.com/support/acrobat
Acrobat Users' moderated forum:
www.acrobatusers.com/forum
I recommend posting this question to the Acrobat Users' forum, where there are many helpful and knowledgeable participants. I'm sorry not to have more specific advice for you! Best of luck.
Kind regards,
Rebecca

Similar Messages

"backup failed while creating the backup folder"

Time machine fails backup.
Backup volume is a 1TB USB External.
Message appears: "backup failed while creating the backup folder"
However whwn enter time machine is entered, there is displayed many-many backup depictions.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Adobe PDF printer failed to create the PDF file

Just installed Acrobat 9 Standard on new HP Touchsmart running Vista 64 bit - tried to create a pdf from a *.pub, and got the error message above, and "please correct the error and try again". If I knew what the error was, I'd try to correct it.

If you check the PDF file with ctrl-D and select the font tab, you will likely find that the font you mention is not embedded. The font not being embedded will make major differences in terms of what fonts Acrobat or Reader finds to do a substitution. Also, the fonts may not display correctly if you have the Use Local Fonts check box selected incorrectly (just try changing that choice).
Fonts can be a major issue in terms of licensing for embedding and such. Also, different job.settings file selections may cause fonts to not be properly embedded.
Since the printer works, the issue of the other packages is the need for PDF Maker to be active in those applications that you are trying to import files from. To check PDF Maker, you need to test it in those applications, not in Acrobat. Trying things in Acrobat is the last step, not the first step. In WORD, there is a need for certain settings to be properly set to allow PDF Maker to work. These may be the issues you are having. So, go back to the applications of interst and be sure that PDF Maker works from the application -- this is the create PDF button.

Adobe PDF Printer failed to create the PDF file in Acrobat Pro X

Trying to convert single and multiple page files (PPT, XLS etc) to PDF documents... get about half way through the process when it all seizes up and the error message in the header appears.
Any ideas about how to fix this?
Thanks

File > create > PDF from file...
Error message is exactly as spelt out in the subject header
MS Office 2003
OS is 32-bit
Ta

Backup Fail with Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider, Event ID 12293, error returned while creating the volume shadow copy 0x8004230f,

We are using TINA backup solution and windows 2003 backup is failling with VSS error.
For testing purpose we initiate a system state backup (or any file backup) with the help of windows 2003 ntbackup.exe and found it is failing with below error.
Backup error report.
Backup Status
Operation: Backup
Active backup destination: File
Media name: "Backup.bkf created 28/05/2014 at 06:34"
Volume shadow copy creation: Attempt 1.
Error returned while creating the volume shadow copy:0x8004230f.
Error returned while creating the volume shadow copy:8004230f
Aborting Backup.
The operation did not successfully complete.
We check event viewer and found below error event.
Event Type:
Error
Event Source:
VSS
Event Category:
None
Event ID:
12293
Date:
28/05/2014
Time:
05:48:10
User:
N/A
Computer:
CQ329TOS
Description:
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details Cannot ask provider {b5946137-7b9f-4925-af80-51abd60b20d5} if
volume is supported. [0x8000ffff] [hr = 0x8000ffff].

Resolution:
After getting this error we check Shadow Copy provider and writer health and fond it is fine.
To get shadow copy providers details use below command.
Command: vssadmin list providers
Command output
C:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
   Provider type: System
   Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
To get shadow copy writers health
Command: vssadmin list writers
Command Output.
C:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {333e02cd-d9ec-43c8-9b45-39691ad1b351}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {800877a5-e13d-47a3-8f99-ebd4d3b3fd12}
   State: [1] Stable
   Last error: No error
Writer name: 'MSDEWriter'
   Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
   Writer Instance Id: {63400aa0-a17f-4121-9483-1cd226f03238}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {e13cb72b-84fa-4c86-86d8-48f523aafc9a}
   State: [1] Stable
   Last error: No error
Writer name: 'Event Log Writer'
   Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
   Writer Instance Id: {ce63b3a0-e038-4e56-9d07-929f256639de}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {008e8714-ed6d-4288-81ce-4b0b1ec41294}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {e22a8953-a52c-4a76-bec0-8773122cbff8}
   State: [1] Stable
   Last error: No error
Next I check Shadow Copies details from volume properties (right click on C or other drive then select properties then click on Shadow Copies Tab) and found it is showing the same error code..
From this error it is clear that the issue is inside the registry hive and due to junk hive shadow copies services not able to working properly.
For me the server have two disk we check disk signature at MBR and found the disk signature was.
Signature disk 0 : 9351912b
Signature disk 0 : FDFBE035
But at registry we found lot of nonexistance signature. Which indicate lot of junk valu inside registry.
Now how can we resolve this issue?
It is very simple just delete the registry key “volume” (registry key “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\STORAGE\Volume”) and reboot the server it will “Volume” registry hive automatically.
Note:
When you remove registry key it is showing error unable to delete, then please right click on it select permission then take ownership and assign full permission to your login account.
Please be careful when you delete registry key because system can fully crashed if you delete or modify wrong registry key.
Your can take a backup of the registry key by exporting.

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Backup failed while copying the redo files due to previous errors

Backup failed while copying the redo files due to previous errors. DATA file backup is successfull. Please suggest what measures we can take to avoid this.. This is a daily online backup.
logs
BR0001I ******************************____________________
BR0202I Saving /oracle/ECQ/sapdata2/sr3700_7/sr3700.data7
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data7 ...
#FILE..... /oracle/ECQ/sapdata2/sr3700_7/sr3700.data7
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data7 #1/29
BR0280I BRBACKUP time stamp: 2010-11-03 20.01.36
BR0063I 29 of 45 files processed - 92344.227 MB of 147448.352 MB done
BR0204I Percentage done: 62.63%, estimated end time: 20:20
BR0001I *******************************___________________
BR0202I Saving /oracle/ECQ/sapdata2/sr3700_8/sr3700.data8
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data8 ...
#FILE..... /oracle/ECQ/sapdata2/sr3700_8/sr3700.data8
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data8 #1/30
BR0280I BRBACKUP time stamp: 2010-11-03 20.03.34
BR0063I 30 of 45 files processed - 98044.234 MB of 147448.352 MB done
BR0204I Percentage done: 66.49%, estimated end time: 20:20
BR0001I *********************************_________________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_10/sr3700.data10
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data10 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_10/sr3700.data10
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data10 #1/31
BR0280I BRBACKUP time stamp: 2010-11-03 20.04.51
BR0063I 31 of 45 files processed - 102064.242 MB of 147448.352 MB done
BR0204I Percentage done: 69.22%, estimated end time: 20:20
BR0001I ***********************************_______________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_11/sr3700.data11
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data11 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_11/sr3700.data11
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data11 #1/32
BR0280I BRBACKUP time stamp: 2010-11-03 20.06.09
BR0063I 32 of 45 files processed - 106024.250 MB of 147448.352 MB done
BR0204I Percentage done: 71.91%, estimated end time: 20:20
BR0001I ************************************______________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_12/sr3700.data12
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data12 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_12/sr3700.data12
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data12 #1/33
BR0280I BRBACKUP time stamp: 2010-11-03 20.07.27
BR0063I 33 of 45 files processed - 110024.258 MB of 147448.352 MB done
BR0204I Percentage done: 74.62%, estimated end time: 20:20
BR0001I *************************************_____________
BR0202I Saving /oracle/ECQ/sapdata3/sr3700_9/sr3700.data9
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data9 ...
#FILE..... /oracle/ECQ/sapdata3/sr3700_9/sr3700.data9
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data9 #1/34
BR0280I BRBACKUP time stamp: 2010-11-03 20.08.45
BR0063I 34 of 45 files processed - 114124.266 MB of 147448.352 MB done
BR0204I Percentage done: 77.40%, estimated end time: 20:20
BR0001I ***************************************___________
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_13/sr3700.data13
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data13 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_13/sr3700.data13
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data13 #1/35
BR0280I BRBACKUP time stamp: 2010-11-03 20.10.02
BR0063I 35 of 45 files processed - 118284.273 MB of 147448.352 MB done
BR0204I Percentage done: 80.22%, estimated end time: 20:19
BR0001I ****************************************__________
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_14/sr3700.data14
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data14 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_14/sr3700.data14
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data14 #1/36
BR0280I BRBACKUP time stamp: 2010-11-03 20.11.30
BR0063I 36 of 45 files processed - 122764.281 MB of 147448.352 MB done
BR0204I Percentage done: 83.26%, estimated end time: 20:19
BR0001I ******************************************________
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_15/sr3700.data15
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data15 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_15/sr3700.data15
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data15 #1/37
BR0280I BRBACKUP time stamp: 2010-11-03 20.12.58
BR0063I 37 of 45 files processed - 127124.289 MB of 147448.352 MB done
BR0204I Percentage done: 86.22%, estimated end time: 20:19
BR0001I *******************************************_______
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_16/sr3700.data16
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data16 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_16/sr3700.data16
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data16 #1/38
BR0280I BRBACKUP time stamp: 2010-11-03 20.14.15
BR0063I 38 of 45 files processed - 131284.297 MB of 147448.352 MB done
BR0204I Percentage done: 89.04%, estimated end time: 20:19
BR0001I *********************************************_____
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_17/sr3700.data17
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data17 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_17/sr3700.data17
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data17 #1/39
BR0280I BRBACKUP time stamp: 2010-11-03 20.15.23
BR0063I 39 of 45 files processed - 135380.305 MB of 147448.352 MB done
BR0204I Percentage done: 91.82%, estimated end time: 20:19
BR0001I **********************************************____
BR0202I Saving /oracle/ECQ/sapdata4/sr3700_18/sr3700.data18
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3700.data18 ...
#FILE..... /oracle/ECQ/sapdata4/sr3700_18/sr3700.data18
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3700.data18 #1/40
BR0280I BRBACKUP time stamp: 2010-11-03 20.15.40
BR0063I 40 of 45 files processed - 136404.312 MB of 147448.352 MB done
BR0204I Percentage done: 92.51%, estimated end time: 20:19
BR0001I **********************************************____
BR0202I Saving /oracle/ECQ/sapdata1/sr3usr_1/sr3usr.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sr3usr.data1 ...
#FILE..... /oracle/ECQ/sapdata1/sr3usr_1/sr3usr.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sr3usr.data1 #1/41
BR0280I BRBACKUP time stamp: 2010-11-03 20.15.44
BR0063I 41 of 45 files processed - 136424.320 MB of 147448.352 MB done
BR0204I Percentage done: 92.52%, estimated end time: 20:19
BR0001I **********************************************____
BR0202I Saving /oracle/ECQ/sapdata3/undo_1/undo.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/undo.data1 ...
#FILE..... /oracle/ECQ/sapdata3/undo_1/undo.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/undo.data1 #1/42
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.02
BR0063I 42 of 45 files processed - 145284.328 MB of 147448.352 MB done
BR0204I Percentage done: 98.53%, estimated end time: 20:18
BR0001I *************************************************_
BR0202I Saving /oracle/ECQ/sapdata1/sysaux_1/sysaux.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/sysaux.data1 ...
#FILE..... /oracle/ECQ/sapdata1/sysaux_1/sysaux.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/sysaux.data1 #1/43
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.11
BR0063I 43 of 45 files processed - 145564.336 MB of 147448.352 MB done
BR0204I Percentage done: 98.72%, estimated end time: 20:18
BR0001I *************************************************_
BR0202I Saving /oracle/ECQ/sapdata1/system_1/system.data1
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/system.data1 ...
#FILE..... /oracle/ECQ/sapdata1/system_1/system.data1
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/system.data1 #1/44
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.39
BR0063I 44 of 45 files processed - 146424.344 MB of 147448.352 MB done
BR0204I Percentage done: 99.31%, estimated end time: 20:18
BR0001I **************************************************
BR0202I Saving /oracle/ECQ/sapdata1/system_2/system.data2
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/system.data2 ...
#FILE..... /oracle/ECQ/sapdata1/system_2/system.data2
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/system.data2 #1/45
BR0280I BRBACKUP time stamp: 2010-11-03 20.18.56
BR0063I 45 of 45 files processed - 147448.352 MB of 147448.352 MB done
BR0204I Percentage done: 100.00%, estimated end time: 20:18
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.00
BR0340I Switching to next online redo log file for database instance ECQ ...
BR0321I Switch to next online redo log file for database instance ECQ successful
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0319I Control file copy created: /oracle/ECQ/sapbackup/cntrlECQ.dbf 12894208
BR0085I 1 offline redo log file found for backup, size 27.933 MB
BR0202I Saving /oracle/ECQ/sapbackup/cntrlECQ.dbf
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/cntrlECQ.dbf ...
#FILE..... /oracle/ECQ/sapbackup/cntrlECQ.dbf
#SAVED.... /oracle/ECQ/sapbackup/beemiuvh/cntrlECQ.dbf #1/46
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0063I 1 of 2 files processed - 12.297 MB of 40.230 MB done
BR0204I Percentage done: 30.57%, estimated end time: 20:19
BR0001I ***************___________________________________
BR0202I Saving /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf ...
BR0278E Command output of 'LANG=C cp /oracle/ECQ/oraarch/ECQarch1_9046_685558507                                                                              .dbf /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf':
cp: /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf: Invalid argument
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0279E Return code from 'LANG=C cp /oracle/ECQ/oraarch/ECQarch1_9046_685558507.                                                                              dbf /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf': 1
BR0222E Copying /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf to/from /oracle/                                                                              ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf failed due to previous errors
BR0056I End of database backup: beemiuvh.and 2010-11-03 20.19.04
BR0280I BRBACKUP time stamp: 2010-11-03 20.19.04
BR0054I BRBACKUP terminated with errors
srva0004:oraecq 59>
Thanks
Preeti
Edited by: Preeti Sharma on Nov 4, 2010 1:54 PM

BR0202I Saving /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf
BR0203I to /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf ...
BR0278E Command output of 'LANG=C cp /oracle/ECQ/oraarch/ECQarch1_9046_685558507 .dbf /oracle/ECQ/sapbackup/beemiuvh/ECQarch1_9046_685558507.dbf': cp: /oracle/ECQ/oraarch/ECQarch1_9046_685558507.dbf: Invalid argument
see above error.
Whats your setting for disk copy command in your init<SID>.sap
I think you are using cp command
>disk_copy_cmd                  copy

"error occurred while creating the backup folder" (-50)

Symptoms:
Bare HDD (Hitachi 1TB). When run on a simple cable setup, no issues. Recently got a Thermaltake BlacX dock, which is more convenient. First and more backup of any given session goes fine, then at some point, the error occurs, after which I can't unmount the drive without forcing it. After I force-eject, I can then reconnect the drive and backups will be fine again.
It may, although I'm not sure of this, occur when I leave the machine to sleep with the drive attached.
This implies that something between Time Machine, OSX and the BlacX are unhappy. Repair and reset haven't helped. Thoughts? I can always go back to using the cable, it was just a pain to set up, so I did backups less frequently, which is bad for me.
The Time Machine error is:
Unable to complete backup. An error occurred while creating the backup folder.
Latest successful backup: 10-09-13 at 1:47 PM
Time Machine Buddy says:
Starting standard backup
Backing up to: /Volumes/Time Machine 1/Backups.backupdb
Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/Time Machine 1/Backups.backupdb/gwiseman (2) size:13
Error: (-50) Creating directory 2010-09-13-184726.inProgress
Failed to make snapshot container.
Error: (22) setxattr for key:com.apple.backupd.ModelID path:/Volumes/Time Machine 1/Backups.backupdb/gwiseman (2) size:13
Backup failed with error: 2
Console after force-eject shows:
10-09-13 11:15:41 PM kernel jnl: disk1s2: close: journal 0x8578e04, is invalid. aborting outstanding transactions

G'day all. Partner has an iMac 21.5 with Intel processor. OSX 10.6.4
Interestingly, we also have the exact same problem with a different brand external hardware RAID 1 as follows:
Welland Terra ME-580J fitted with two Samsung 1.5TB SATAII 3.5" 32M HD154UI drives.
The Welland site [http://www.welland.com.tw/html/2bay/580j.html] info is pretty brief but it DOES show Mac/PC in its brochure.
Connected via USB2.
From new we had to go through the initialisation stuff and had lots of hair pulling moments. Basically the RAID1 drive needed to be partitioned.
As with Geoffrey, TM did an initial full back up, then went OK for a few hours, then TM started giving the error message "error occurred while creating the backup folder".
Additionally any repair attempts via Disk Utility failed because the TM (Raid1 drive) couldn't be unmounted.
ALL apps were shut down leaving only Finder. Still couldn't unmount ext HDD. Kept getting the message that an app may be using the drive, etc.
Forced demount. Unplugged USB, turned power off to Welland and re-arranged the drives to be two independent drives.
Re powered the Welland, re-connected by USB, and there were TWO drives shown as "Time Machine" except one had the TM icon, the other a standard USB icon. This is exactly as I would have expected seeing as RAID1 disks have identical data on each.
RE-partitioned the USB drive to a) remove all data and b) change its name to avoid confusion.
TM now seems happy. I'm NOT happy, however, as this completely negates the whole idea of having back-ups to a RAID1 set-up.
It would be easy to suggest there is a problem within iMac/OS X, as two people having exactly the same problems with completely different hardware is just too much of a co-incidence.
Any thoughts and help would be truly appreciated, as I'm at the end of my limits, here.
With thanks, Ian.
PS please be kind to me, as I haven't gained a lot of Mac knowledge yet!

R12 : System Failed to generate the PDF Document.

I am trying to create a PO thru auto create but I hit inquire > View Document , I encountered an error: System Failed to generate the PDF Document. Please contact your system administrator. We just updgrade our instance from 11.5.2.10 to r12.1.2. Any thoughts?
Thanks,
Leo

Please see if these docs help.
System Fails To Generate PDF Document After Clicking "PDF Document" On Supplier Notification When Different Languages Are Used [ID 1078546.1]
PO Email From Tools>Communicate At Same Time of Approval Corrupts PDF File Transmits As .HTML & System Failed to Generate PDF [ID 1287488.1]
Thanks,
Hussein

Getting *Not all values are bound* error while creating the VO

Hi
When i create a VO with the following query i am getting ORA-01008: not all variables bound error after giving apply.
The Query is:
SELECT
emp.full_name CSA,
COUNT(*) "Total # disputes",
SUM(rac.total_amount) "Total Dispute Amt",
(SELECT
COUNT(jtb4.task_id)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) = trunc(SYSDATE)
AND rac4.org_id = *:1*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "#D's on Today",
(SELECT
NVL (SUM (rac4.total_amount), 0)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) = trunc(SYSDATE)
AND rac4.org_id = *:2*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "$Val Disp on Today",
(SELECT
COUNT (jtb4.task_id)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) < trunc(SYSDATE)
AND rac4.org_id = *:3*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "#D's <Today",
(SELECT
NVL (SUM (rac4.total_amount), 0)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) < trunc(SYSDATE)
AND rac4.org_id = *:4*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "$Val Disp<Today",
(SELECT
COUNT (jtb4.task_id)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) > trunc(SYSDATE)
AND rac4.org_id = *:5*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.owner_id=emp.resource_id
AND jtb4.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "#D's >Today",
(select
nvl(SUM (rac4.total_amount), 0)
FROM
jtf_tasks_b jtb4,
ra_cm_requests_all rac4
WHERE
rac4.request_id = jtb4.attribute8
AND jtb4.attribute_category = 'Dispute'
AND trunc(jtb4.scheduled_end_date) > trunc(SYSDATE)
AND rac4.org_id = *:6*
AND jtb4.owner_type_code = 'RS_EMPLOYEE'
AND rac4.status = 'PENDING_APPROVAL'
AND jtb4.open_flag = 'Y'
AND jtb4.owner_id=emp.resource_id
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp4
WHERE rac4.customer_trx_id = arp4.customer_trx_id
AND arp4.amount_in_dispute IS NOT NULL)) "$Val Disp>Today",
MIN(jtb.scheduled_end_date) "EARLIEST_END_DATE",
MAX(jtb.scheduled_end_date) "LATEST_END_DATE"
FROM
jtf_tasks_b jtb,
ra_cm_requests_all rac,
jtf_rs_emp_dtls_vl emp
WHERE
rac.request_id=jtb.attribute8
AND jtb.owner_id=emp.resource_id
AND jtb.attribute_category='Dispute'
AND rac.org_id =*:7*
AND jtb.scheduled_end_date IS NOT NULL
AND rac.status = 'PENDING_APPROVAL'
AND jtb.owner_type_code = 'RS_EMPLOYEE'
AND jtb.open_flag = 'Y'
AND EXISTS (SELECT 1
FROM apps.dnb_ac_orc_coll_csa_map_s orc
WHERE orc.csa_id = jtb.owner_id
AND NVL(orc.attribute1,107) = *:8*
AND orc.customer_segment = *:9*
AND EXISTS (SELECT 1
FROM ar_payment_schedules_all arp
WHERE rac.customer_trx_id = arp.customer_trx_id
AND arp.amount_in_dispute IS NOT NULL
GROUP BY emp.full_name
,emp.resource_id
I dont have any cue why the error is prompting while creating the VO itself. Kindly let me know the issue with the above query.
Thanks,
Praveen

Praveen,
In the Query , you are given alias name like "#D's on Today" . Avoid to use special charaters in coulmn alias in the view query, as the alias name is failed to conver it into view attributes.
During creating view object, in the query screen, there is dropdown which is below the query region. By default it is style of "oracle named" , changed it to "Oracle Positional".
Thanks,
Kumar

Error while creating the CTXXPATH Index

Hi,
I tried to create the CTXXPATH index on my table, which has XMLTYPE column. But while creating the index i m getting the below error,
Error report:
SQL Error: ORA-29958: fatal error occurred in the execution of ODCIINDEXCREATE routine
ORA-29960: line 1,
DRG-11304: function-based indexes are not supported by this indextype
29958. 00000 - "fatal error occurred in the execution of ODCIINDEXCREATE routine"
*Cause: Failed to successfully execute the ODCIIndexCreate routine.
*Action: Check to see if the routine has been coded correctly.
I m using oracle 11g version. Could anyone please help me in resolving it.

Hi,
you can have a look at document "How to Create a Context Index Using a Function [ID 1063279.1]" at Oracle Support. You tried to create a CONTEXT index using a function but a function-based index is not supported. Workaround given in the document is to use a Multi_Column_Datastore.
CTXXPATH is deprecated in Oracle 11.1, better is to use XMLINDEX, see http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/whatsnew.htm.
Herald ten Dam
http://htendam.wordpress.com

Error while creating the AW

Hi,
While creating the analytic workspace I am getting following message..
Can anyone please tell what might have gone wrong? Any help will be appriciated.
Preparing
Creating analytic workspace...
Processing cube AW_SALES_CUBE
Processing Creating Dimension : AW_CUST_DIM
Processing Creating Dimension : AW_PROD_DIM
Processing Creating Cube : AW_SALES_CUBE
Processing Defining Load for Cube: AW_SALES_CUBE
SqlException = ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Error Code = 6510
Sql State = 65000
All the cubes could not be added to the Analytic Workspace AWSALE;
The following cubes could not be added : SALES_CUBE
Could not generate SQL for Views and ADTS for OLAP API and beans enabling.
java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Tidying Up
Failed to create the analytic workspace

The versions are follows..
Also, I tried with another set of tables. But, I still got the same errors. I am attaching all those details..
Please help..
--SOFTWARES....
--Oracle Database:
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
With the Partitioning and OLAP options
JServer Release 9.2.0.5.0 - Production
--OEM
9.2.0.1.0 Production
--AWM
9.2.0.4.1D
--TABLE CREATION SCRIPTS
Note: I created the following tables in user RMS_PROTOTYPE
create table meter (
meter_id number(10),
meter_name varchar2(40),
make_id number(10),
make_name varchar2(40)
alter table meter
add constraints meter_pk
PRIMARY KEY (meter_id)
NORELY DISABLE NOVALIDATE;
create table month (
month_id number(10),
month_name varchar2(40)
alter table month
add constraints month_pk
PRIMARY KEY (month_id)
NORELY DISABLE NOVALIDATE;
create table invoice (
invoice_id number(10),
month_id number(10),
meter_id number(10),
invoice_amount number(16,2)
alter table invoice
add constraints invoice_pk
PRIMARY KEY (invoice_id)
NORELY DISABLE NOVALIDATE;
alter table invoice
add constraints invoice_meter_fk
FOREIGN KEY (meter_id)
REFERENCES meter (meter_id)
NORELY DISABLE NOVALIDATE;
alter table invoice
add constraints invoice_month_fk
FOREIGN KEY (month_id)
REFERENCES month (month_id)
NORELY DISABLE NOVALIDATE;
Note: I created the following dimensions/cube in user RMS_PROTOTYPE
--METER DIMENSION
CREATE DIMENSION RMS_PROTOTYPE.METER_DIM
LEVEL LVL_METER IS METER.METER_ID
ATTRIBUTE LVL_METER DETERMINES (METER.MAKE_ID, METER.METER_NAME, METER.MAKE_NAME)
begin
cwm_classify.remove_entity_descriptor_use(28, cwm_utility.DIMENSION_TYPE, 'RMS_PROTOTYPE', 'METER_DIM');
cwm_olap_dimension.set_plural_name('RMS_PROTOTYPE', 'METER_DIM', 'METER_DIM');
cwm_olap_dimension.set_display_name('RMS_PROTOTYPE', 'METER_DIM', 'METER_DIM');
cwm_olap_dimension.set_description('RMS_PROTOTYPE', 'METER_DIM', 'Meter Dimension');
cwm_olap_level.set_display_name('RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'LVL_METER');
cwm_olap_level.set_description('RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'Level Meter');
cwm_olap_level_attribute.set_name('RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'MAKE_ID', 'MAKE_ID');
cwm_olap_level_attribute.set_name('RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'METER_NAME', 'METER_NAME');
cwm_olap_level_attribute.set_name('RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'MAKE_NAME', 'MAKE_NAME');
cwm_olap_dim_attribute.create_dimension_attribute('RMS_PROTOTYPE', 'METER_DIM', 'MTR_Name', 'MTR_Name', 'Meter Name');
cwm_classify.add_entity_descriptor_use(41, cwm_utility.DIMENSION_ATTRIBUTE_TYPE, 'RMS_PROTOTYPE', 'METER_DIM', 'MTR_Name');
cwm_olap_dim_attribute.create_dimension_attribute('RMS_PROTOTYPE', 'METER_DIM', 'Mk_Id', 'Mk_Id', 'Maker Id');
cwm_classify.add_entity_descriptor_use(42, cwm_utility.DIMENSION_ATTRIBUTE_TYPE, 'RMS_PROTOTYPE', 'METER_DIM', 'Mk_Id');
cwm_olap_dim_attribute.create_dimension_attribute('RMS_PROTOTYPE', 'METER_DIM', 'Mk_Name', 'Mk_Name', 'Maker Name');
cwm_olap_dim_attribute.add_level_attribute('RMS_PROTOTYPE', 'METER_DIM', 'MTR_Name', 'LVL_METER', 'METER_NAME');
cwm_olap_dim_attribute.add_level_attribute('RMS_PROTOTYPE', 'METER_DIM', 'Mk_Id', 'LVL_METER', 'MAKE_ID');
cwm_olap_dim_attribute.add_level_attribute('RMS_PROTOTYPE', 'METER_DIM', 'Mk_Name', 'LVL_METER', 'MAKE_NAME');
cwm_classify.add_entity_descriptor_use(41, cwm_utility.LEVEL_ATTRIBUTE_TYPE, 'RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'METER_NAME');
cwm_classify.add_entity_descriptor_use(42, cwm_utility.LEVEL_ATTRIBUTE_TYPE, 'RMS_PROTOTYPE', 'METER_DIM', 'LVL_METER', 'MAKE_ID');
commit;
end;
--Month DIMENSION
CREATE DIMENSION RMS_PROTOTYPE.MONTH_DIM
LEVEL LVL_MONTH IS MONTH.MONTH_ID
ATTRIBUTE LVL_MONTH DETERMINES MONTH.MONTH_NAME
begin
cwm_classify.remove_entity_descriptor_use(28, cwm_utility.DIMENSION_TYPE, 'RMS_PROTOTYPE', 'MONTH_DIM');
cwm_olap_dimension.set_plural_name('RMS_PROTOTYPE', 'MONTH_DIM', 'MONTH_DIM');
cwm_olap_dimension.set_display_name('RMS_PROTOTYPE', 'MONTH_DIM', 'MONTH_DIM');
cwm_olap_dimension.set_description('RMS_PROTOTYPE', 'MONTH_DIM', 'Month Dimension');
cwm_olap_level.set_display_name('RMS_PROTOTYPE', 'MONTH_DIM', 'LVL_MONTH', 'LVL_MONTH');
cwm_olap_level.set_description('RMS_PROTOTYPE', 'MONTH_DIM', 'LVL_MONTH', 'Month Level');
cwm_olap_level_attribute.set_name('RMS_PROTOTYPE', 'MONTH_DIM', 'LVL_MONTH', 'MONTH_NAME', 'MONTH_NAME');
cwm_olap_dim_attribute.create_dimension_attribute('RMS_PROTOTYPE', 'MONTH_DIM', 'MNTH_NAME', 'MNTH_NAME', 'Month Name');
cwm_classify.add_entity_descriptor_use(41, cwm_utility.DIMENSION_ATTRIBUTE_TYPE, 'RMS_PROTOTYPE', 'MONTH_DIM', 'MNTH_NAME');
cwm_olap_dim_attribute.add_level_attribute('RMS_PROTOTYPE', 'MONTH_DIM', 'MNTH_NAME', 'LVL_MONTH', 'MONTH_NAME');
cwm_classify.add_entity_descriptor_use(41, cwm_utility.LEVEL_ATTRIBUTE_TYPE, 'RMS_PROTOTYPE', 'MONTH_DIM', 'LVL_MONTH', 'MONTH_NAME');
commit;
end;
--SALE CUBE
declare MTR_DIM number;
MTH_DIM number;
tmp number;
begin
CWM_OLAP_CUBE.Create_Cube('RMS_PROTOTYPE', 'INV_CUBE', 'Invoice Cube', '');
MTR_DIM := CWM_OLAP_CUBE.Add_Dimension('RMS_PROTOTYPE', 'INV_CUBE', 'RMS_PROTOTYPE', 'METER_DIM', 'MTR_DIM');
CWM_OLAP_CUBE.Map_Cube('RMS_PROTOTYPE', 'INV_CUBE', 'RMS_PROTOTYPE', 'INVOICE', 'INVOICE_METER_FK', 'LVL_METER', 'RMS_PROTOTYPE', 'METER_DIM', 'MTR_DIM');
MTH_DIM := CWM_OLAP_CUBE.Add_Dimension('RMS_PROTOTYPE', 'INV_CUBE', 'RMS_PROTOTYPE', 'MONTH_DIM', 'MTH_DIM');
CWM_OLAP_CUBE.Map_Cube('RMS_PROTOTYPE', 'INV_CUBE', 'RMS_PROTOTYPE', 'INVOICE', 'INVOICE_MONTH_FK', 'LVL_MONTH', 'RMS_PROTOTYPE', 'MONTH_DIM', 'MTH_DIM');
CWM_OLAP_MEASURE.Create_Measure('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_AMOUNT', 'Invoice Amount', '');
CWM_OLAP_MEASURE.Set_Column_Map('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_AMOUNT', 'RMS_PROTOTYPE', 'INVOICE', 'INVOICE_AMOUNT');
CWM_OLAP_MEASURE.Create_Measure('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_ID', 'Invoice Id', '');
CWM_OLAP_MEASURE.Set_Column_Map('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_ID', 'RMS_PROTOTYPE', 'INVOICE', 'INVOICE_ID');
tmp:= cwm_utility.create_function_usage('SUM');
cwm_olap_measure.set_default_aggregation_method('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_AMOUNT', tmp, 'RMS_PROTOTYPE', 'METER_DIM', 'MTR_DIM');
tmp:= cwm_utility.create_function_usage('SUM');
cwm_olap_measure.set_default_aggregation_method('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_AMOUNT', tmp, 'RMS_PROTOTYPE', 'MONTH_DIM', 'MTH_DIM');
tmp:= cwm_utility.create_function_usage('SUM');
cwm_olap_measure.set_default_aggregation_method('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_ID', tmp, 'RMS_PROTOTYPE', 'METER_DIM', 'MTR_DIM');
tmp:= cwm_utility.create_function_usage('SUM');
cwm_olap_measure.set_default_aggregation_method('RMS_PROTOTYPE', 'INV_CUBE', 'INVOICE_ID', tmp, 'RMS_PROTOTYPE', 'MONTH_DIM', 'MTH_DIM');
commit;
end;
Note: I tried to create the analytic workspace in user RMS_PROTOTYPE_AW. But I got the following error.
--ERROR in AWM
Preparing
Creating analytic workspace...
Processing cube P_INV_CUBE
Processing Creating Dimension : P_METER_DIM
Processing Creating Dimension : P_MONTH_DIM
Processing Creating Cube : P_INV_CUBE
Processing Defining Load for Cube: P_INV_CUBE
SqlException = ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Error Code = 6510
Sql State = 65000
All the cubes could not be added to the Analytic Workspace AW_INV_01;
The following cubes could not be added : INV_CUBE
java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Tidying Up
Failed to create the analytic workspace
Thanks in advance.

Error while creating the structure

hello friends,
i have two doubts
1)
i am getting the error while creating the structure in se11.
well i am creating the structure in the following way
in component i am giving the values as bom and in component type i am giving the value as meins.
i am getting the status warning message as the below
'field name does not agree with the proposed name base_bom for bapi table'
2)
and more over can we create the structure as the follwing in se11.
component = f1 and
component type = tablename-fieldname
when i am doing in the second way i am getting the error as the following table is not active though the table is active

hi guru,
just component name as --- your field name.
where as component type as give just data element k.
no need to give tablenme-fieldname k.
component component type .
f1 matnr----
data element
thanks anji.
Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM

Error while creating the document

Hi Experts,
When i create the document in CV01N transaction and while i try to check in the document in "DMS_C1_ST" i am getting the error message as * An error occured while creating the original attribute for PDF*.
Kindly let me know how to resolve this issue.
Regards,
Bhanu

Hi Bhnau,
could you please check the following link and made sure that the mentioned entries in table SDOKPROP are maintained correctly in your system.
http://wiki.sdn.sap.com/wiki/display/PLM/Error26296in+CV01N
Best regards,
Christoph

Error while calling the PDF in BSP pages in ECC6.0: Question BSP Gurus

Hi BSP experts,
Any Experts have solutions for below.
We recently moved BSP pages into ECC 6.0 .Iam getting the error in BSP page while calling the PDF.
The scenario is like this: The PDF is getting called the via URL:
The code is like this
CALL FUNCTION 'GUID_CREATE'
    IMPORTING
      ev_guid_32 = guid.
CONCATENATE runtime->application_url '/' guid '.pdf'    INTO   URL.
<u><b>This URL is called in the front end LAYOUT.</b></u>
<iframe src="<%= URL %>" width="100%" height="600px">
</iframe>

you missed one question of mine <b>Do you create the PDF after creating the GUID ?</b>
try giving a fixed URL just to test.
Aman

PDFMaker Office 2010 fails while creating the PDF

Similar Messages

Maybe you are looking for