PDFs Crashing Acrobat 9.3.4 for seemingly no reason

We're having a big problem with commented PDFs (made in Indesign) crashing at seemingly random points. Have tried re-saving the PDFs, opening in different locations (both local and network drives), changing view options, etc...
The crashes occur on on both our MacMinis and iMacs, sometimes at the same point in a PDF, sometimes not.
I have saved several of the crash logs, if they're of any help.
OS X 10.6.4, Acrobat 9.3.4.
EDIT: I need to do some more testing, but our problem sounds an awful lot like the one reported in http://forums.adobe.com/message/2951011 . I've only recently started using Two-Up view and the crashes only started after that. Unfortantely, using Single Page view is not much of a solution. Laying out double pages is much easier when both pages can be seen at the same time!

Another thread that looks very similar:
http://forums.adobe.com/thread/719838
This bug definitely seems to be linked to using Two-Up page view and having multiple comments on a PDF.
It was suggested that the problem might lie with the fact that the PDFs we're working with were created in Indesign CS3, but we've now replicated the problem with PDFs from Indesign CS5.

Similar Messages

AES256 encrypted PDF crashes Acrobat X but works for 9.x

Hi,
i've encrypted a PDF with AES-256 (Acrobat 9) encryption with a selfwritten PDF library.
It opens fine in Acrobat 9.x but Acrobat X crashes a few seconds after opening.
Here's the problematic PDF:
http://dl.dropbox.com/u/17203884/PdfCrypter_de.pdf
Opening password is "2850" (just the number without quotes)
Preflight 9.x tool doesn't report any syntax error, Preflight X cannot be tested because of crash.
I'm sure there is a syntax problem, can your help me?
When i replace the /StructTreeRoot entry in Catalog dictionary with spaces in a hex-editor Acrobat doesn't crash but
some Contents is still missing..
Any idea what's going wrong?
Thanks in advance and best regards
Dirk Carstensen

Interesting. I was able to confirm that the test ran with Acrobat 9.x on a Mac, but crashes with Acrobat X on a PC. And I made sure my Acrobat X had latest upgrades.
The test seems valid since it was able to run on PDF Interpreter software I work on. This software does support 256 bit encryption, with output matching Acrobat 9.
- Dave

Interactive PDF crashes Acrobat 9

Has anyone experienced interactive PDFs causing Acrobat 9 to crash? The PDF was created using the Interactive PDF preset in InDesign CS5. The file contains buttons, SWF animations, and videos. The file is about 300MB, mostly from the embedded videos.
The PDF file opens without incident on most of our machines. On about half of the machines, Acrobat 9 crashes when opening the file. The error in the event log refers to an error in drvdx9.x3d.
OS: Windows XP SP3
Acrobat version: 9.0, 9.2, 9.4.1
The troubleshooting steps we have already tried include
updated chipset/display drivers on Rick’s laptop
copied the drvdx9.x3d file from my machine to his
updated DirectX
uninstalled/reinstalled/patched Acrobat
disabled hardware acceleration in Flash

I have checked and unchecked every single option in the preferences just to see what the result would be.
When comparing the preferences of PDFmaker 8 and PDFmaker 9 the differences are pretty obvious.
PDFmaker 8 will have 1 option more then PDFmaker 9. Its that option that will make the links in the index work.
I dont think posting screendumps will work, since our system is dutch and everything will be in dutch.
We have AA9.3, we always keep things updated.
Repairing Acrobat wont solve it. We only have 1 workstation with AA8 and its that station that has this option. All other AA9.x station dont.
I dont believe the option is removed completely, but probably moved to some other place to be checked or unchecked. I just dont know where..
Any more suggestions are welcome!
Regards,
Martijn van der Graaf

Help in putting movies into pdf with Acrobat 8.0 Pro for a free textbook

For the next version of my free 1500 page
physics text ( download at www.motionmountain.net )
I have big problems. I need to use Acrobat Distiller,
I have bought it for this reasons,
but I do not get embedded movies to work. Distiller
does not find the mpg files; the competing
freeware ps2pdf does.
This few line tex demo file works fine with ps2pdf
(using relative path to the mpg file)
www.motionmountain.net/testdir/filmtest.tex
www.motionmountain.net/testdir/filmtest.aux
www.motionmountain.net/testdir/filmtest.log
www.motionmountain.net/testdir/filmtest.dvi
www.motionmountain.net/testdir/filmtest.ps
www.motionmountain.net/testdir/filmtest.pdf
but this simple tex file for Acrobat Distiller,
with absolute paths, as Acrobat wants,
does not work:
www.motionmountain.net/testdir/filmtest2.tex
www.motionmountain.net/testdir/filmtest2.aux
www.motionmountain.net/testdir/filmtest2.out
www.motionmountain.net/testdir/filmtest2.dvi
www.motionmountain.net/testdir/filmtest2.ps
This is the Acrobat Distiller error text:
%%[ Error: undefinedfilename; OffendingCommand: file ]%%
Stack:
(r)
(/Users/christophschiller/Desktop/aFys-tex-6/Films/gyroprec.mpg)
{fstream1}
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
(Found in www.motionmountain.net/testdir/filmtest2.log)
I use Mac OSX 10.4.11, Adobe Acrobat 8.1.2 Pro.
Mac OSX has no Unix "strace" command.
Somebody told me to start Distiller with the -F flag.
This might solve the problem. How is this done on MacOSX?
The OSX command structure I know of is
open -a Distiller.app filename.ps
This does not allow to add a -F flag for Distiller,
or am I wrong?
Any help is greatly appreciated !
Best regards
Christoph

Don't use Distiller to input the movie files, use Acrobat. Even if you
get the files into the pdf, the chances are they won't play properly in
Acrobat or Reader on the Mac.
Additionally, I don't think you can use mpg files. I think you are
restricted to .mov or Flash files on the Mac on Acrobat 8. I used to be
a .mov type of guy, but Flash player is available to more people. My
recommendation is to upgrade to Acrobat 9 for its new Flash abilities
which do not require either Flash or Quicktime. If you don't upgrade to
Acrobat 9, then go with Quicktime .mov files. Acrobat 8 and earlier will
only handle flash version 4 or earlier if my memory serves.
BTW, you avoid all these issues is you use the attachment tool, rather
than the movie tool, but then they cannot play within Acrobat, but will
launch a separate process. They you can use your mpgs.
Mike

Print pdf in Acrobat 9 stopped working for all programs (only the pdf converter office add-in works)

Windows 7 x64 has a problem:
http://social.answers.microsoft.com/Forums/en-US/w7files/thread/0617cfb6-dd06-4cb6-874d-0c ec97d3a310?prof=required&ppud=4
To solve that nesting issue, I followed these instructions:
In order to accomplish the proper redirection, you need two junctions:
1) A Local Settings junction, that will forward programs going to
%userprofile%\Local Settings to the new folder.
2) An Application Data junctions *inside of the new folder* that points back on itself, to get programs accessing %userprofile%\LocalSettings\Application Data.
If you think about it, it makes sense ... when the program is accessing local settings, it will get forwarded to the folder it needs to be in, however, it is also accessing a folder named Application Data *inside of the correct folder it needs* (since it has already been redirected by the Local Settings junction), so the Application Data junction has to point back on itself for things to function properly.
I would suggest checking the security settings on your Application Data junction (C:\users\yourname\appdata\local) (you will need to select show operating system files from folder options in an explorer window).
Go to the security tab, click advanced, then edit, and make sure you see a deny permission for everyone on the list.
If there isn't one listed, create one for "Everyone" and check the box under Deny next to "read folder / list data".
Once I added "everyone" and "deny", I received 300 error messages, which I all clicked on "continue".
After each restart, no program worked, and hundreds of error messages popped up.
So, I removed the "everyone denied" entry again.
Now, all programs start normally.
But:
If I want to say "print to pdf", it goes through the motions, prints something, and opens the pdf dialogue, and at exactly half time of the progress bar says "stopped". No matter if I want to pront from internet explorer, windows explorer, acrobat, word, editor, ...
Why?
How can I reverse this?

I can't open the Form Tools though is what I'm saying. When I open the document in Acrobat 9 Pro I have no form tools.
I have to go to [Forms] -> [Edit Forms in Designer] in order to open the form tools.
Only when I select to open in designer I do not get the Acrobat Pro Designer, it automatically opens the document in LiveCycle and I have no option or ability to change the document designer to Acrobat Pro.
Is there some way I can "Force" the docement to open in Acrobat 9 Pro designer JUST so I can add the print button?

Keep Losing Connection For No Apparent Reason

Have had BT Infinity for about 18 months or so now. Every now again, I get spells of it (the hub and the router) crashing out for seemingly no reason. Reconnects, only to disconnect again. Was so bad yesterday, it made PC unusable. Unplugged everything overnight last night, as lost my rag with it, plug it all back in again this morning. Worked fine until this afternoon, where it started doing the same again, all be it not quite as often as yesterday. I had the router changed out by Kelly Comms in Dec, but never had a problem with the old one, so was reluctant to change it, now I can see why!!
Any ideas, before I launch it up the garden?
Cheers
Solved!
Go to Solution.

On behalf of feline-fan
Time and date
Message
Feb 6 16:50:19 2012
( 103.250000) Admin login successful by ***.**.***.**on HTTP
Feb 6 16:49:51 2012
INF 2012-02-06T16:49:51Z cwmp: cwmp_session: session completed successfully
Feb 6 16:49:51 2012
INF 2012-02-06T16:49:51Z cwmp: cwmp_session: got empty envelope
Feb 6 16:49:51 2012
INF 2012-02-06T16:49:51Z cwmp: cwmp_session: got envelope, len=0
Feb 6 16:49:50 2012
INF 2012-02-06T16:49:50Z cwmp: cwmp_session: InformResponse is completed
Feb 6 16:49:50 2012
INF 2012-02-06T16:49:50Z cwmp: cwmp_session: sending empty envelope to ACS
Feb 6 16:49:50 2012
INF 2012-02-06T16:49:50Z cwmp: cwmp_session: InformResponse
Feb 6 16:49:50 2012
INF 2012-02-06T16:49:50Z cwmp: cwmp_session: got envelope, len=0
Feb 6 16:49:50 2012
INF 2012-02-06T16:49:50Z cwmp: cwmp_session: got envelope, len=455
Feb 6 16:49:48 2012
INF 2012-02-06T16:49:48Z cwmp: cwmp_session: sending envelope to ACS
Feb 6 16:49:48 2012
INF 2012-02-06T16:49:48Z cwmp: session started event code(s): '6 CONNECTION REQUEST'
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: session completed successfully
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: got empty envelope
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: got envelope, len=0
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: InformResponse is completed
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: sending empty envelope to ACS
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: InformResponse
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: got envelope, len=0
Feb 6 16:49:46 2012
INF 2012-02-06T16:49:46Z cwmp: cwmp_session: got envelope, len=455
Feb 6 16:49:44 2012
( 68.310000) Socket error
Feb 6 16:49:44 2012
( 68.310000) Socket error
Feb 6 16:49:44 2012
( 68.290000) Socket error
Feb 6 16:49:14 2012
INF 2003-01-01T00:00:39Z cwmp: cwmp_session: sending envelope to ACS
Feb 6 16:49:14 2012
INF 2003-01-01T00:00:39Z cwmp: session started event code(s): '1 BOOT'
Feb 6 16:49:11 2012
( 58.010000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Feb 6 16:49:06 2012
ERR 2003-01-01T00:00:31Z cwmp: mt_cwmp: session error: Could not resolve host
Feb 6 16:49:06 2012
INF 2003-01-01T00:00:31Z cwmp: mt_cwmp: session not established, will retry in 30 seconds
Feb 6 16:49:06 2012
INF 2003-01-01T00:00:31Z cwmp: cwmp_session: session completed successfully
Feb 6 16:49:06 2012
INF 2003-01-01T00:00:31Z cwmp: cwmp_session: got envelope, len=-1
Feb 6 16:49:01 2012
INF 2003-01-01T00:00:26Z cwmp: cwmp_session: sending envelope to ACS
Feb 6 16:49:01 2012
INF 2003-01-01T00:00:26Z cwmp: session started event code(s): '1 BOOT'
Feb 6 16:48:43 2012
( 29.980000) DVA started
Feb 6 16:48:42 2012
( 29.040000) Device with no MAC wasn't assigned a MAC
Feb 6 16:48:42 2012
( 28.710000) sys_if_stats_reset failed for atm0
Feb 6 16:48:40 2012
( 26.670000) No primary and rollover device found
To my untrained and tired eyes, looks to me as if the HH2 is failing.
A HH3 from BT, if you report this, could well resolve this.
Anyone else have any thoughts?
-+-No longer a forum member-+-

Since 10.10.2 upgrade, my computer zooms in for no apparent reason

I just updated to 10.10.2 two days ago. Since then, I'll be working on something and for seemingly no reason, the entire screen enlarges to the point that I can't find submit buttons. It seems to happen most frequently when I'm in Safari. I used to be able to use "command-zero" and it would return to the normal size but now that doesn't work - and all programs that are open also enlarge. The top menu disappears as well. I've tried force quitting Safari but that doesn't help with the other programs that have the huge screen. I did try modifying some of the options on the trackpad in system preferences but no go. Also the pinch to make the screen item smaller no longer works. All positive suggestions welcome. Thanks
Macbook Pro
built in trackpad
10.10.2
16 G RAM
1 TB hard drive.

Hey pariseau,
Thank you for using Apple Support Communities.
My first thoughts from your description of your screen enlarging is that the Zoom option from the Accessibility preferences has been enabled. Take a look at this article on accessibility options and how to turn them on and just reverse it to turn them off if necessary.
OS X Yosemite: Set options for accessibility
Cheers,
Jeff D.

Word 2003 crashes when converting to a PDF in Acrobat 9.3.1

OS                    :   Windows XP Pro SP3
Acrobat Version:   Acrobat Pro 9.3.1.
M.S. Product     : Word 2003
Not every file will crash Word 2003 when converting to a PDF using Acrobat Pro 9.3.1 but this particular file and some others will produce the following error:
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[ Error: syntaxerror; OffendingCommand: ) '$ $ $ &$   ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
The co-worker was receiving the same error in Adobe Acrobat Pro 9.0 before we updated her to AAP 9.1.3.
I have read some other threads similar to mine but none of them answer the question well enough to try anything listed there. My co-worker can email me the Word file and I can print the file to my Adobe PDF printer just fine. I have Acrobat Pro 7.0.
Can anyone give me help on the cause and or solution to this problem????

Hi,
- syntaxerror indicates the file contains unintelligible PostScript code.
Any discussion of postscript errors, seem to consistently point to:
http://kb2.adobe.com/cps/328/328515.html
A troubleshooting guide is down in the bottom third of the page.
Be well...

Interactive PDF created in InDesign CS6 crashes Acrobat XI

Just finished laying out an interactive document in InDesign and exporting to as an interactive PDF to Acrobat. The document is 48 pages and has 3 pop-up TOC's for each of the 3 sections. There are several other hyperlinks, top and bottom nav menus. The document opens fine but when we try to open either of the TOCs Acrobat either crashes or the menu will pop up with buttons not visible. I have gone through the document several times and rechecked all button settings. Everything appears in order. The document navigates perfectly in SWF preview and when exported as a SWF or HTML. Can't figure out where the glitch is. I'm in the Cloud so have the latest versions of all software. The project is on a very tight deadline and is part of a presentation in 2 days. Has anyone else had this issue? If so, how did you resolve it? Please help.

Made each menu item a separate text frame and created text anchors/destinations. In buttons and forms panel, set event to go to destination "on release or tap" and chose "hidden until triggered." For each menu there's also a close button. Set "show/hide" for menu items and close button and set the main button that opens the menu to "show" the entire TOC. Each of the TOCs are on their own layers. Very straightforward, nothing fancy.

Calling AVDocClose with more than one PDF open crashes Acrobat

That pretty much sums it up. If I have a single PDF open and I call AVDocClose everything works great. If I have more than one PDF open it crashes Acrobat and takes down all of the open documents. Any ideas as to what might be happening and how to get around it? I'm seeing it in both Acrobat 8 and Acrobat 9.

Okay, that sounds ike it could be something to look at. I'm certainly not an expert in using the SDK so maybe you can help me identify the potential issue. This is the code I'm using with some comments to help you understand what I'm doing. I just added the ASFileSysReleasePath references after reading your post but apparently I'm still missing something. The issue occurs in the code path where I'm working with local documents.
ACCB1 void ACCB2 MyPluginCommand_Save(void *clientData)
initializeVariables();
if(myAVDoc==NULL)
// if no doc is loaded, display a message.
AVAlertNote("There is no PDF document loaded in Acrobat.");
else
//Here are a couple of functions that are just used to set up some file paths for both windows and acrobat
string docName = getDocName();
string path = buildAcroPath(docName);
ASPathName upPath = ASFileSysCreatePathFromCString(NULL,path.c_str());
//call doc exists to see if we have a local doc or one that is in control of my DMS - doesn't use any Acrobat SDK functions
bool ndExists = ndDocExists(filename);
if(!ndExists) //if the file is not from the DMS
//save this file to a temporary location - this is what actually gets sent to the DMS
PDDocSave(pdDoc, PDSaveFull | PDSaveCopy | PDSaveCollectGarbage , upPath, ASGetDefaultFileSys(), NULL, NULL);
//send the document to the DMS and get the status of the operation back - doesn't use any Acrobat SDK functions
int ndStatus = ndImport(path);
checkNDStatus(ndStatus);
else
//This is a document from the DMS. Just do a regular file save
PDDocSave(pdDoc, PDSaveFull | PDSaveCollectGarbage , pathName, ASGetDefaultFileSys(), NULL, NULL);
ASFileSysReleasePath(ASGetDefaultFileSys(), upPath);
ASFileSysReleasePath(ASGetDefaultFileSys(), pathName);
AVDocClose(myAVDoc, false);
return;

I am having problems combining 2 pdf's together. When I do it crashes Acrobat XI. The files are fairly large about 20Mb each if that helps. Others have been able to combine them without issue. Any Ideas?

I am having problems combining 2 pdf's together. When I do it crashes Acrobat XI. The files are fairly large about 20Mb each if that helps. Others have been able to combine them without issue. Any Ideas?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I'm disappointed with the performance. Any

Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple? I've been sending them so many reports after crashes, that their file must be full!

Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
Last login: Thu Nov 3 20:55:11 on console
Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.AmbrosiaSW.AudioSupport(4.0)
Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.openssh.sshd
com.stclairsoft.DefaultFolderXAgent
com.microsoft.office.licensing.helper
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
com.bombich.ccc
com.adobe.SwitchBoard
Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.sony.PMBPortable.AutoRun
uk.co.markallan.clamxav.freshclam
com.veoh.webplayer.startup
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
ApplicationEnhancer.framework
AudioMixEngine.framework
FxPlug.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProFX.framework
ProMetadataSupport.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
EPPEX Plugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.sony.PMBPortable.AutoRun.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
com.microsoft.office.licensing.helper.plist
com.stclairsoft.DefaultFolderXAgent.plist
/Library/PreferencePanes:
.DS_Store
Application Enhancer.prefPane
Default Folder X.prefPane
DejaVu.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.microsoft.office.licensing.helper
com.stclairsoft.DefaultFolderXAgent
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
LiveType.component
/Library/ScriptingAdditions:
.DS_Store
Adobe Unit Types.osax
Default Folder X Addition.osax
/Library/StartupItems:
Library/Address Book Plug-Ins:
Library/Frameworks:
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
com.veoh.webplayer.startup.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
.DS_Store
Perian.prefPane
WindowShade X.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/ScriptingAdditions:
Steve-Kirkbys-iMac:~ stevekirkby$

When I print to PDF using Acrobat 11 Pro from any application the acrobat Reader does not launch automatically. Associations are correct. Thx for your help, Bruce

When I print to PDF using Acrobat 11 Pro from any application the acrobat Reader does not launch automatically. Associations are correct. Happens from Chrome, IE, Word, Excel, Powerpoint. Previously had deskPDF installed but uninstalled correctly. Can't find a preference setting for the auto launch. Thx for your help, Bruce

A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/

Acrobat X (only) pauses for minutes when opening a new PDF

If I just had a PDF file open, close it, then reopen it, Acrobat X (specifically) won't pause. But if I try to open a new PDF file, Acrobat X will open it but then will hang for as long as 3 minutes before letting me edit it.
Why does Acrobat X do this.
Thanx for any replies.
Slowly

I see this behavior too. It hangs and won't accept mouse commands for 30 seconds when opening a new document. It also won't let me close the window "application not responding."

Hi I want to get an acrobat aplication and SDK for converting .tiff and .jpg to OCR PDF and, add wat

Hi I want to get an acrobat aplication and SDK for converting .tiff and .jpg to OCR PDF and, add watermark and reducing size of files, all in one product

Yes, Acrobat Pro can do that. The SDK is free t o download.

PDFs Crashing Acrobat 9.3.4 for seemingly no reason

Similar Messages

Maybe you are looking for