PDFs missing bleed when placed

I'm having an occasional weird problem in InDesign: I place an advertisement which has bleeds and cropmarks. These bleeds and cropmarks disappear in InDesign even though the frame is plenty large enough to show all of it. This happens occasionally both with ads I receive and with files that I create by exporting to PDF (the bleeds are there but don't show up when I place the PDF in another document). With my own files, I can ultimately print to PDF (instead of exporting) and get it to work, but I don't know what to do with this ad I just received:
http://www.rotor.com/temp/LifePortAd.pdf
The cropmarks and bleeds are always missing when placed -- whether it's a new document or an existing one. Are they somehow marked as non-printing in the PDF?
Any ideas?
Thanks, Phyllis

Okay, I didn't notice that you could turn off the fixups (some of the profiles had specifically warned me that they were going to change the document). But most of those I'm not too sure about running anyhow. But the analysis ones look useful. "PDF analysis > List images below 250 ppi" seems like a very good one to run each time. I don't know what else I'd use. Ultimately I have to create a PDF with my printer's joboptions anyhow, but it'd be good to find out obvious problems from the start.
Thanks!
Phyllis

Similar Messages

Why does PDF substitute characters when placed in Illustrator CS4?

When trying to place a PDF (x1a) Table into my illustrator file, it substitutes different characters. My hyphens and Quotation marks become latin and cyrillic substitutes. Even when I've outlined all fonts within the table before exporting to PDF x1a. When I open the PDF in Acrobat Pro or Photoshop it shows correctly. Only Illustrator shows it incorrectly. When I direct select the elements within the PDF in illustrator, it selects the outlines of the incorrect character. ???
My solution was to export from Indesign as an eps and it places just fine. I originally wanted to copy and paste the table (either outlined or not) from Indesign into Illustrator, as I'm sure usually totally works, but time and time again it wouldnt work. That was why I was going the place PDF route.
If anyone has come across this before, I'd love to know how/why this is happening, and how to fix... Thanks in advance.

MMM, good ideas thank you!
When I open in Acrobat its fine. When I open as PDF in Illustrator its
corrupt.
When I place in a new ai file, as a link, its fine. When I place in new
file, embedded, its corrupt.
However, when I open as a PDF in Illustrator or place it as an embedded PDF
into Illustrator, it includes all the layers, I can select the separate
corrupt layers and delete them. So it turns out I can get rid of them with
this process.
It seems perhaps its an indesign thing, and a Indesign Tables thing. When I
outline the Table and its contents, it creates another layer of outlined
text on top of the live text. If I try and delete the non-outlined text, it
deletes the Table lines?? So if I leave it as is, I believe its the live
text underneath that is substituting for some reason?

Why do my pdf files disappear when placing into Indesign CC?

I was working a late night rush project. When I came to the point of placing pdf files in my indesign CC document nothing worked. The first files showed up missing their header. They next file simply did not appear on the page. They previewed ok. The eventual work around was to place them in Indesign 5.5, an older program. Then they came in fine. I need to have an answer to why this happened. I was not placing the files from the cloud on somewhere on the internet but from my hard drive. I am getting very frustrated with this new CC application.

Try showing the import options and make sure the crop option you want to use is one that is not grayed out.

PDF missing text when browsing or linking to a page

Hello,
I have an issue with missing text in a PDF file when I try and browse directly to a page in a PDF. Interestingly, the text is not missing when you open the PDF and navigate to the same page from within the PDF. The first Character(s) of the title are missing.
The title of this page should say Criminal Justice, but the "C" is missing when you visit this link--
http://www.northeast.edu/Degrees-and-Programs/pdfs/2010-Catalog.pdf#page=103
This only happens if you try to navigate directly to a page. If you use the pagers within the PDF then the text is fine. If you change the link in the url to represent the page you are trying to visit, the characters disappear again.
Any thoughts or suggestions would be very much appreciated.
Thanks!
Derek

Acrobat 9 (professional)
Windows XP
Internet Explorer 7, 8
PDF file is published as compatible with version 6. Original document was published as PDF from Indesign.
Hmmm, I have tested on 4 machines and still get the same results. These machines are all XP/IE machines though. Any other thoughts?

PDF text disappears when placed in InDesign

I am experiencing trouble keeping the text I type onto a pdf form visible once it is placed into an InDesign document.

I've seen that when the field size is a little tight in the PDF.

Illustrator CS3: perfectly fine pdf gets destroyed when placing in Illustrator

Hi!
I am new to Illustrator, but I just dont get the problem. A perfectly looking pdf comes out looking all wrong when it is placed in Illustrator.
This is how the diagram looks in pdf. Perfectly scalable.
This is how it looks after beeing imported in Illustrator.
Everything else that was imported form the pdf looks fine. Only this diagramm gets destroyed!
Why does this happen?

How was the PDF created? Printed, Exported? Some other method?
If nothing else helps, you could do the following: it looks like the problems are only in drop shadows and text. You could delete both from the Power Point file, export, save or print the PDF. Then import into Illustrator and recreate shadows and text there.
I don't think you could transfer the complete graohic from PP to Illy as vector anyway. So rather get away with as much as you can and then complete it.

PDF white lines when placing in Illustrator

I have some PDF graphics created using MapInfo software.
When I attempt to place the PDF map as a layer in Illustrator, the map appears with numerous white lines as though each polygon area of the original map has been broken up into individual squares.
Is there some setting in Distiller to overcome this problem?
Should I be creating an EPS map file and then using that as a layer in Illustrator?

How was the PDF created? Printed, Exported? Some other method?
If nothing else helps, you could do the following: it looks like the problems are only in drop shadows and text. You could delete both from the Power Point file, export, save or print the PDF. Then import into Illustrator and recreate shadows and text there.
I don't think you could transfer the complete graohic from PP to Illy as vector anyway. So rather get away with as much as you can and then complete it.

Illustrator file missing objects when placed in InDesign

I created an Illustrator file that has text converted to outlines. Some of it is white and some of it is other colors. When I save the file as eps, pdf or export as jpg and then place the files in InDesign, the white outlined text doesn't show up. Advice?

Check the attributes panel if it is set to overprint

Crop mark issue when placing and PDF in Indesign

I've just had this strange issue that I can't figure out and I'm not sure if anyone else has had it as well.
I exported a PDF through InDesign with crop marks. I then placed the PDF in Indesign and for some reason the bleed and the crop marks don't
show up! I've never had this issue with Indesign before.
Is it even InDesign, or is it the PDF itself?

Select show options when placing and select the appropriate crop to choice.
Bob

When placing a PDF created with Distiller, I only get Crop and Media as import options -- I need it to crop to the Trim! PLEASE HELP!

I'm having a MAJOR problem placing PDF files in InDesign CS4...
When I try to place a PDF that has been created in Distiller, the ONLY import options I can choose are CROP and MEDIA. I need it to crop to the TRIM, but that option is grayed out. The PDFs I'm trying to place were created in-house, and converted from Post Script files to PDFs using Distiller. We use PDF/X-1a equivalent settings when creating our PDFs.
If I export the file as a PDF and then try to place it into a CS4 file, I am able to select Trim as an option.
ALSO, if I open the Distiller PDF in Acrobat and then save it (without changing anything), I am able to select Trim as an option. A workaround I have found is to open all of the PDF files in Acrobat, save them to my desktop, and then save over the ones I need to place. Here's the problem with that: I work for a publishing company, and need to place hundreds of ads for each issue of our publications, and it adds a lot of time if I have to go and re-save everything just to be able to place all the ads.
Does anyone know how to fix this problem? I need to get this figured out so we can use CS4 for all of our publications again. -- We've gone back to using CS3 until I can get this figured out...
- Valerie

Steve,
Thanks for the reply, but my PDFs all have trim boxes on them. If I try to place the same PDF in InDesign CS3, it gives me Trim as an option. Also, if I open the PDF and save a copy to my desktop, I am able to select Trim as an option when placing the PDF, and I didn't change anything about it.
I've been trying to see if it's something with the Print Preset settings I'm using, but I can't find anything that seems like it would affect how InDesign would read the Trim area of the PDF.
I've attached 2 PDF files. One that was created with Distiller, and one that was exported from InDesign CS4. The Distiller one doesn't show Trim as an option in CS4, but the exported one does.... but they started out as the same ad. Ugh! Help me please!
- Valerie

Indesign crashes when placing pdf created in Xinet Fullpress.

Indesign crashes when placing a pdf from Xinet Fullpress. Xinet thinks the problem is in inDesign.
What to do?
The pdf files works fine in acrobat and apple preview.

Hi Peter, here is the link to the crashreport:
http://pastebin.com/xzpp717i
If you need the a test file that crashes, please download it on the attached link below.
regard Martin
Xinet pdf crash
Hi, click on the link to download
Tue Sep 18 2012, 15:47:53

Cropped PDF's appear uncropped when placed in InDesign CS3

I have an original PDF that I only needed a portion of. I cropped it in Acrobat 8, using the crop tool and resaved it as a new PDF document. But when I place the new PDF document in InDesign the entire original PDF document appears.
Any suggestions,
David

Select show options when placing and choose crop as the crop to option.
Bob

Indesign crashes when placing PDFs

All,
When placing PDFs in and Indesign file, it occasionally crashes. Usually when doing multiple pages, one at a time, some work and some crash.... although the ones that crash always crash and I cannot get them placed.
The goal is to put the PDFs in the file and add text and/or images over the PDF.
Solutions?
Power Book Pro OS 10.8.5
Indesign CS 6

Eugene,
Produced with IText 2.0.2 (by Iowagie.com), PDF version 1.6 (Acrobat 7.x)
However, some of the pages place just fine, and some crash every time. Suspect there's corruption on the crashing pages.
Is there a way I could save the file in a different format or program and open that into Indesign?

Why does scale change when placing snapshot from pdf document?

IDCS3: I cut a furniture detail from a pdf document with the "snapshot" tool. I place this image, which includes text, into an InD document. The scale is huge! I do not know how much to reduce to get it to the exact same scale as it was in the pdf. In addition, the quality diminishes when placed in InD. The document size of the pdf document is A4 - that of the InD document is A3. Thanks!

Why not place the original pdf (vector & raster, I assume) and crop to the area you'd like - retaining the vector & raster, rather than use a screen shot (raster).

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

I get missing fonts when opening a PDF, but the fonts are activated, I get garbage

The activated fonts are not the same version as those in the PDF. If you use Type>Find Font and replace the fonts with ones from your computer does it work?

PDFs missing bleed when placed

Similar Messages

Maybe you are looking for