PDFs print with magenta when printing in greyscale

PDFs print with magenta when printing in greyscale

BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

Similar Messages

  • Firefox won't print with my new HP P1102W printer. The printer will print if I use IE8. Please advise settings tomake firefox print with my new printer

    firefox 3.6.12 won't print with my new HP P1102W laser printer. The printer will print if I use IE8. Please advise settings tomake firefox print with my new printer . I spoke with HP tech support. We reinstalled all drivers. They adamantly say it is a Firefox issue and you should have some modifications for it.
    When I try to print from the internet using Firefox, a dialog box pops up which says "preparing to print." However, it hangs and I have to manually shut it down. Doing this terminates the Firefox session, and it will not restore upon restart. This printer will print files on my hard drive, and if I use IE8, which I do not want.
    Thanks

    It must be a Firefox problem, since it works perfectly in Chrome.

  • How to print with a wireless printer with airport extreme

    how to print with a wireless printer with airport extreme

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • Duplex printing with hp p1102w printer mac book pro with retina display

    duplex printing with hp p1102w printer mac book pro with retina display

    Hello dekcanada,
    I apologize, I'm a bit unclear on exactly what you are asking or describing. If you are asking how you would set up double-sided or duplex printing in Yosemite, you may find the information and steps outlined in the following article:
    OS X Yosemite: Choose advanced print settings
    Sincerely,
    - Brenden

  • How to print with a Windows printer

    Is it possible to print with a net printer Ricoh Aficio MPC 3001 without the Postrscript with our Imacs?

    http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc281/mpc281en.htm
    googled it with this
    https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=Ricoh+Aficio+ MPC+3001&oq=Ricoh+Aficio+MPC+3001&gs_l=igoogle.3..0i10j0i30j0i10i30l3j0i30j0i5i3 0.159792.159792.0.160175.1.1.0.0.0.0.152.152.0j1.1.0...0.0...1ac.6gJzJbz0xZc

  • Why does black/white print with magenta hue?

    When I print black/white greyscale in Adobe Reader or Acrobat, some documents print with ghost text that appears in a light magenta.  This ghost text is staggered to the bottom right of the black text. 
    I'm printing from Mac OS X 10.8.4, Adobe Reader 11.0.03 using an HP LaserJet 1525nw. 
    The left side of the image is a screen capture from the PDF and printed.  The right side printed directly from the PDF.
    Any ideas why this happens?

    Sorry - I was able to find out how to do color calibrate.  It is supposed to print a page but never did.  I tried it twice.  Not sure if it actually did anything.  But results are the same with printing.
    The printer is very low on the three color cartridges, which I don't use.  It is at normal capacity on black.  Even though I'm selecting to print only black/white in Reader, could the low status on the color cartridges be causes this pink hue?
    I did try a pure PDF document (one that isn't a scanned print page).  It printed without issue.  As I mentioned above, there is something about a scanned in printed page, which causes this pink hue issue.

  • Printer Error Messages When Printing PDF Documents

    I keep getting the following error messages when I try to pring a PDF document. This application has failed to start because LXBBGF.DLL was not found. Reinstalling the application may fix this. The other error message is: Cannot load library LXBBPRP.DLL using default error 126. I spent over and hour with a Lexmark Tech. who unsistalled my Lexmark X75 printer and he did a register edit to make sure my register was cleared of all the old Lexmark entries. He then reistalled the printer and the drivers, but the error message still pops up when trying to print a PDF Document. He checked out the printer and it will print and scan all other types of documents with no error messages. He also had me unistall Acrobat Reader 11.0 and reinstall it. I also did a sytem restore but none of the remedies I have tried so far has fixed the error messages issues. I would like to get this problem resolved as soon as possible because I need to print my travel documents asap. This forum is great but can someone please let me know how to get in touch with Adobe Technical Support. I need their toll free phone number and email address?

    Hi Pat,
    When I first encountered the PDF printing problem I went to the Adobe Web Site and downloaded the most current version of Adobe Reader which was the 11.0.6 version and the Lexmark Technician uninstalled the old driver and installed the updated version of the printer's driver. But this did not resolve the PDF printing problem. Both before and after the PDF printing problem surfaced I was able to print all other document formats except PDF documents.
    It seems very strange to me that once I uninstalled  the Adobe Reader 11.0.6 and reinstalled my old version of Adobe Reader 9.3.3 that all of sudden I was able to print all of my other PDF documents. But that's what happened and Adobe still insists that it was a printer issue. I did a little research and this is not the first time Adobe has had compatibility/configuration issues with Lexmark printers and they have not resolved these issues.
    I know I am taking a chance by using an unsupported unsecure version of Adobe Reader, but at this time I don't have any other option. Unless Adobe develops a patch/workaround solution. Which I hoping they will do, but I don't think this is going to happen soon because this issue is not a high priority as it only effects a small portion of their customer base.
    Thanks For Your Input/Comments
    Edd

  • Need some help with orientation  when Printing Tickets

    Hi Guys,
    We use an online ticketing system which when clicked on "print ticket" Safari window comes up showing the ticket as a PDF. You move the mouse to the bottom of the page, where adobe reader icon bar appears so you can print.
    Now currently when the ticket comes up, The ticket is shown horizontally and the part you would normally tear off (stub) is on the left hand side, However when we go to print, because the ticketing paper is setup as the stubs first then the rest of the ticket, this orientation has the ticket being printer first then the ticket stubb, which is the opposite to the way the paper in the printer is, causing the ticket to be printed incorectly. If I was to rotate the image twice, so that the text appears upside down, with the stub on the right side, and print the ticket it prints correctly, since the stubb is printed first and matches the paper.
    Is there a way to have the ticket appear as it is now so you can read it on the preview but flip the pdf 180 degrees up side down, so the stub is on the right side, and gets printed first, before it goes to the printer.
    Forgive me but I have looked and haven`t found,  any setting that work. I have tried the flip horizontally option as well as the reverse page orientation, which hasen`t fixed the problem.
    I want to be able to get the orientation, correct and be able to save as default, the settings so its a simple click print, type of operation, without having to readjust it everytime.
    It is important that I get this orientation correct, as it affects the print stubs, and ticket.
    also keep in this on Mac's as well, and my layout direction option is greyed out.
    Hopefully that makes sense.
    Any help is greatly apreciated, as I do need to get this problem resolved fairly soon, as our box office is getting buys.
    Thanks,
    soundguy

    soundguy911 wrote:
    Is there a way to have the ticket appear as it is now so you can read it on the preview but flip the pdf 180 degrees up side down, so the stub is on the right side, and gets printed first, before it goes to the printer.
    If you "flip" the PDF, any text on the document will be mirrored; you will need to rotate it.
    One method I can imagine is to use JavaScript to rotate the PDF, but I'm not sure that this function actually exists.  Check for yourself: http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf
    Note that if you build a "rotate" JS into Adobe Reader, every PDF document that is opened will appear rotated.

  • LR4.1 Printing with magenta cast?

    Hello Adobe
    I have just moved to LR4.1 from a bridge/PS6 workflow. I am having issues with the prints having a magenta cast. I have a colour managed workflow (Eizo ColourEdge monitor, Datacolour calibration, Epsom R3000 using paper manufacturers icc profiles). The magenta cast is happening when printing through LR4 using the papers icc profile. Same file is fine when printed with the same profile through CS6.
    I can see some questions with the same issue but cannot see a resolution that is applicable. Is it you or me? Help please

    Many thanks. Problem solved- instead of "No colour Adjustment" the setting was "sRGB". All good now
    Vicki Moritz
    Ujamaa Ridgebacks
    Marysville/Mt Waverley
    Victoria
    Australia
    http://rridgeback.net/
    0418 397296
    Photography
    http://www.marysvillephotography.com.au/

  • Incomplete print dIalog box when printing PDFs

    During the past several weeks, whenever I try to print a PDF, the print dialog box (when Copies & Pages is selected in the pull-down menu) is blank ... I can't select how many copies or which pages to print. This only started happening recently, before that everything was fine. It doesn't matter how the PDF was created ... by OS X, by InDesign, by Photoshop, or arriving in email, the result is the same ... incomplete dialog box. My workaround so far when I want more copies or only certain pages, is to "place" the desired pages in InDesign and do the printing from there ... big pain and not an acceptable long-term alternative.
    Anyone know of anything that might have happened with recent software updates?

    Karen....I found this thread while looking for some help with the same problem. Did you ever find a solution? I have Acrobat 7 and 8 running on a Mini with 10.4.11 and am having the same problem in Acrobat 7 only, Acrobat 8 behaves fine. When going to the Print dialog, the area below the "Copies & Pages" button is blank. I can change the "Copies & Pages" button to other settings but the dialog box does not hold the change, it reverts back to "Copies & Pages". I have replaced Acrobat 7 without any luck.

  • Objects missing when exporting to PDF, but show up when printing to PDF

    Hi - I'm working with someone, both of us in InDesign CS4, and she has some documents that cause a few random objects to just go missing when exported to PDF (same on my computer). But when printing to PDF, they show up fine. They also show up fine if we recreate each individual object, but that can end up being a lot of work. She prefers to export to PDF because of quality. I'm drawing a blank on this one!
    The attached file shows the issue. The green blocks just don't want to show up when exporting.

    Peter -
    The links are just the PDFs of the black and white portions and don't really matter too much since they show up fine when exporting or printing to PDF. Our main concern is the green blocks, which are indeed the green areas of the plan you pointed out. They are actually separate objects created directly within InDesign that can be moved and adjusted.
    I just updated to 6.0.4 and that didn't help. I wonder if this may be a variant of the bugs I was reading about with master pages and certain things not showing up when creating PDFs or printing (even though none of these things are on the master page)?
    Thanks

  • Are there any Color Adjustments for Safari?  Printing with Magenta overlays.

    Are there any Color Adjustments for Safari?  When printing the iphone at www.apple.com/iphone/compare-iphones/ the phones have a Magenta Overlay on them.  Tried Firefox and Chrome with same computer, plus a PC to the same printer.  All else prints fine.  Have Intel based iMac, updated to 10.7.5, and using Safari 6.0.1.  I called Canon, and they said it is an issue with Safari.  Any Solutions?  Any way of replacing Safari?  (Recently updated to Lion via software downloads.  No disc.)

    Welcome to Apple....
    Kumusta Ka?  Ma init pa dyan?
    If you're browsing the web and you're internet connection is slow or sometimes dropping, it is normal for Safari to hang or freeze for a little bit until it connects to the site you're trying to view or visit.
    Try this - go to system preferences - network - advance - dns and change your dns server.
    see image below - let me know if na ayos mo na ang internet mo.

  • Lightroom 3 prints with magenta cast

    Hi,
    My lightroom 3 prints with all red objects in the picture having a dreadful magenta colour cast, both on my Epson r2400 and on my HP colour Laserjet 2605dn. Printing from window explorer is OK - colours look fine but there aren't so many options for printing available.

    Yes, as suggested, go into your printer settings (which you access in LR at Print Module > Page Setup (lower left) > Properties (for your printer).  Now this will vary, depending on the make and model of your printer, but for my Canon printer, you access this at Main > Color Intensity: Manual > Set.  In WinXP, I needed to UNCHECK Enable ICM (Windows Image Control Management). In Win 7, I get more accurate color with this same setting CHECKED on. You will want to save the correct settings at LR > Print module > User templates (on the left).
    If that doesn't solve it, this common issue can have different causes depending on your gear and on your settings, so some experimentation is in order.
    What has caused this issue for me:
    In LR
    > Print module > Print Job (on the right, at the bottom) > Profile > Managed By Printer. Beat suggested this setting. For me, this setting causes color shift and exposure shift issues in prints. If you've already had this setting enabled (I believe it's enabled by default), it may need to be changed. For me, the fix was downloading printer paper profiles from my printer company's website and installing them into Windows as instructed and then selecting the correct one of them, matching my photo paper and using corresponding settings in the printer settings, instead of Managed By Printer.
    Another cause for this issue can be failure to use a hardware color calibrator.  Even if you have run a software-based color calibration routine and get reasonably accurate color in other programs, using a hardware color calibrator, even a $100 or under one, and carefully following all the calibrator instructions (these devices can make things worse when used plug-n-play) will remove color casts and make prints that are too dark in LR much more accurate, matching print to monitor.
    There are likely other causes and fixes as well.
    When you get it figured out, type yourself a note listing everything you did and where you found each setting, and save the file.  Someday after reinstalling LR, you will need it again.

  • Printer driver hangs when printing with Office 2013/Windows 8 64 bit

    Printer: HP Color LaserJet CM1312nfi
    Printer Driver: V5.1 (up to date, downloaded from HP support website) or Generic V5.6
    OS: Windows 8 Professional 64bit
    When I try to print a certain Excel document with Excel 2013 and printer driver V5.1, the program hangs and needs to be terminated via task manager. This happens always with the same document, but not with all documents. The program hangs also when opening the print preview for the same document.
    The same document prints fine with the generic printer driver V5.6 and with the driver that comes with Windows 8.
    The same document prints fine with driver V5.1 under Windows 7 and Office 2010. The combination Windows 7/Office 2013 was not tested. The combination Windows 8/Office 2010 was also not tested.
    When I try to print an empty document with Word 2013 and generic printer driver V5.6, the program hangs and needs to be terminated via task manager.
    My conclusion is that the HP printer drivers have a problem with either Windows 8 or Office 2013 or a combination of both.
    The printer driver that comes with Windows 8 and is automatically installed is useful as a temporary workaround, but it lacks certain options, e.g. manual duplex.
    On request, I am ready to send the Excel document by e-mail for verification of the problem.
    Any help or suggestions will be very much appreciated.
    Thanks in advance,
    Uli
    This question was solved.
    View Solution.

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

  • How do you reduce the size of the print diolog box when printing a pdf file?

    How do you reduce the size of the print diolog box when trying to print a PDF file? The print button is below the task bar.

    What is your monitor's screen resolution?  See http://www.adobe.com/products/reader/tech-specs.html

Maybe you are looking for