PDFs show up as having "0" data on the recipients email

When I attach a PDF file to an email I am sending some recipients get a "0" data PDF. On some of them the PDF Logo has a gray bar near the bottom with a small white circle on the left. Not all recipients have this problem and I can sent from web based email clients with no problem. Any suggestions.

Similar Messages

I need to send an attachment. When I attach it to my email it shows up "open" in the recipients email instead of being an icon type attachment. How do I fix this?

I need to send an attachment. When I attach it to my email it shows up "open" in the recipients email instead of being an icon type attachment. How do I fix this?

once you finalize the addressing the list disappears, so how can is affect the subject . For that matter is disappears when it looses focus.
I have heard of a bug that selects the name that is highlighted when the mouse leaves the selection box if no address is selected. Perhaps that is your issue. Until the issue is fixed I suggest you use tab to leave the address box

Show only logged in User Data from the cube

Hi,
Suppose I have couple of customers' data in the cube. And these customers are some BW users. Now, i wish my query should display data only for the customer/user who has logged in. The query could be created by any user.
Is this possible in a web report?
regards,
Sam

Hi
Refer this thread
Re: query execution statistics
The query execution statistics can be fetched from the relevant table that acts as source for your query
Regards
N Ganesh

When "show remote content" button is clicked remote content does not show. If I go back to the same email later "show remote content" is not on page.

The "Question" basically out lines the problem.
No remote content shows when the "show remote content" button is clicked. Once it has been clicked on a specific email, if I come back to the same email, the "show remote content" button is not on the email page and again no remote content shows in the body of the email.
I am running an up-to-date version (24.4.0) of Thunderbird.

Was able to load Windows in Safe Mode by pressing and holding F1 then F8. Then loaded Windows in safe mode with networking, but had no effect; no remote content in email and no "Show Remote Content" button.
It was suggested the body of the email is "Plain Text" and the remote content is "HTML", so I checked the setting in "View" - "Message Body As" - "Original HTML" was togged on.

Issue having seperate data pushes for multiple email accounts

I've always had gmail set up through my phone. I love push and don't receive any issues using it.I recently added a 2nd, work email (exchange) to my phone. However, I'd prefer to manually check the exchange account while leaving my gmail on push. I can't seem to figure it out though. My best guess was to go:
settings>mail>fetch new data>advanced.
I have my gmail on push and my exchange on manual. I would assume the advance settings override the push and fetch settings on the primary "fetch new data" screen. However, nothing seems to be working the way I want it to. Sometimes my phone will auto-update my exchange, sometimes i'll get gmail belated, etc.
If anyone could please advise the proper settings for both the primary screen as well as the advance settings in order to have my exchange on manual and gmail on push.
Thanks

Note sure what G mail is, but if it involves another isp email provider not interested, I have multiple accounts as a garbage dump for spam possibilities too much spam on one account bye bye. Usually 2 main email accounts though. btw, not a memory issue either. still plenty left. Was looking at the contacts thread and there is receiving/sending issues with email since 2.0 update anyway.

Flatten PDF whit Assembler have NO form data ¿lose?

Hello
I using LC ES 8.2.1, and have licence for Forms ES and ReaderExtensions ES Services.
I need flatten XFA based form generated with Adobe Designer, and saved as "Static PDF Form" (we no have Output Service).
1) Have Static PDF Form + XML data.
2) Forms ES: Load XML data on the form.
3) Assembler: Form with data (generated on 2 point) flatten using <NoXFA /> or <NoForms />
PROBLEM:
The problem is in the flatten PDF generated by Assembler have NO DATA, if the Assembler DDX happened to get <NoXFA /> or <NoForms />, the resulting PDF does NOT show the form data that had previously preloaded with Forms ES.
¿Why PDF LOSE data? ...have any way to flatten PDF with data (without using OUTPUT Service)????
Thx

Hi,
Well it did not work, we have updated the version from the ES 8.2.1 to 8.2.1.3 and still IS running incorrectly.
We used two different mechanisms to place XML data in PDF:
- Forms
- FormDataIntegration
None works, the imported data do not appear in the final flatten PDF.
Where it works properly is with LC ES2, we have to update, because we rush to deliver this development.
While we understand that should work with the ES version 8.2.x, all documentation is in your website says this, but the reality is that (at least to us) does not work, the static PDF preloaded (with DataIntegration or Forms) and then flattened with Assembler NOT show the latest data preloaded.
Thx.

Data Targets does not show up despite having Active Update Rule

Hi mates,
I have an Info Cube of which I have created an Update Rule from a Active Info Source.
However, when I created the Info Package, the 'Data Targets' tab does NOT seem to show the Info Cube as part of the Data Target
Please advice

hello John;
check if this is a Basic cube or Transactional cube. If for some reasons this has been created as a transactional cube then you won't be able to see the cube on the InfoPackage because you theoritically you won't be loading data into the transactional cubes.
let us know the details.
Regards:
BK

AI Document having multiple layers to be exported as PDF, showing each layer content as a single pa

I am currently working on Adobe Illustrator 9.0. In this single document i have made 10 layers(showing each page). Now i want export this document to PDF, in which each layers should come as single page. Like a PDF with 10 pages.
Is this possible?
As of now, whenever i try n save the file as PDF with one layer active. It creates big PDF showing all the layers content in One single page(Overlapping)
KD

Hide those layers you do not want in your PDF (click on the 'eye' in the layers palette). If all layers are unhidden, you can alt-click on the eye of one layer in order to hide all the others.
If you do this kind of thing a lot, you should consider a plug-in like
HotDoor Multipage
or, if content permits, doing the job in a page layout application, such as InDesign.

Pdf portfolio source file name and date in file details

Is it possible to import the source file name and extension as well as the source file created date in the portfolio file details? Need to document source to portfolio in working with 3rd parties that will only have the original source. Need to document what was converted into pdf as not all files in a directory will successfully convert to pdf. Sometimes need to convert 100's of files. Manual entry is inefficient. the file names and modified dates are displayed on the Combine Files dialog. is there a way to capture the detail on that page?

I don't need the detail of when the pdf was added to the portfolio. I
need know which dwg or jpg or word file was converted and the original
created date of that file for control of information.
That is impossible; sorry. For some *very specific* types of conversion to PDF the pdfx:SourceModified XMP tag will be set to show the last-modification date of the source file (for example DOCX files converted using MS Word), but there will never be a human-readable record of the source filename or its creation date unless you have manually added them as document XMP properties after conversion (this is what the "Custom Properties" dialog is for). To embed source data automatically would raise no end of privacy and security problems for customers, who most certainly do NOT want their recipients seeing details of internal documents.
Without writing a plugin there's no access to the internal workflow of the Combine Files dialog, so you cannot use a script to read the names and dates of the files *before* conversion and store them automatically in the new PDF Portfolio's Fields array.

Schedule Line Date Showing in future in Sales Order though the Stock is available in system on same date

Hello All,
Good Morning,
We have received an Incident where in the Sales Order during the ATP Check we do user is getting the future schedule line date in future as enclosed in the screen shot below. User has created the Sales Order on 12052014 for 7 line items. For the Line Item 7 the Stock is available in the system on same day but still after ATP Check the date is shown in future.
I wan to replicate the scenario in Quality to find the exact bug to fix the Issue but not able to replicate for same customer and material i am getting the current date as confirmed delivery date. please guide me if you can share some inputs so that i can go in right direct and fix the issue.
Please respond it is critical Issue.
Thanks,
Farhan.

Hello All Experts,
Many Thanks for all the Inputs you have given.
Finally we have replicated the Issue in Quality 2 Days Back and Indeed it was great Achievement.
Finally We have given to Abaper to debug it find the root cause.
Let me summarise the actual Issue.
Issue : Sales Order Schedule Line showing future date for the Materials which are having Product Allocation even though the Stock is available and Allocation Qty also available in the PA Master Data we maintained..
We created one Sales Order for Line Item A and B. Line Item A is having Product Allocation. When we created Sales Order for both Line Item A and B we got Schedule Line Date as 13.06.2014. Then we Schedule the Re-Scheduling Job in V_V2 and check the effect. For Line Item A the Schedule Line Date got changed to 01.07.2014 and Line Item B it was same as before.
Would like to know is there any config setting at Schedule Line Level we have missed just want to cross check if there is any or something in Product Allocation Configuration.
Please refer screen shots below for more details of Sales Order before and after effect in Re-Scheduling.
Please provide your inputs on this.
Thanks,
Farhan.

PDF shows in safari 5.1, text is blurred out.

Hi all,
I've been having the problem of safari not showing pdf's, this is partially solved now. But since I've followed the steps on another thread here,
I can see the pictures in a pdf, but not the text. The text seems to be blurred out as shown in the picture below :
Another awkward issue is that when I open the same pdf in Google Chrome, de pdf shows normally, but when I try to open the pdf from chrome in preview, the same blurred text appears.
Any solutions?

Did the person that made the PDF use Word for Windows to make the PDF?* It's now possible to make PDFs directly from Word with File > Save As but one of the default options, "Bitmap text when fonts may not be embedded", makes the text (by now a graphic) unreadable in Preview or the built-in Safari view. I don't know if this is Microsoft's fault for making the bitmaps in a strange way, or Apple's fault for having a bug in Preview.
* You could always find out by opening the PDF in Preview and doing Tools > Show Inspector

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

HT201656 In itunes my iphone shows up as having nearly 8G of "Other"...what is taking up all this space?

In itunes my iphone shows up as having nearly 8GB of "Other"...what is taking up all this space?
On the iphone itself under settings, general, usage it indicates 12.7GB used and only 840MB available. I have one app (Audible) that is taking up 1.6GB, photos&camera take up 636MB, Spotify takes up 495MB, everything else takes up less less than 100MB each and totalling less than 2.5GB.
So if Audible is taking up 1.6GB and Spotify is taking up 636MB and all other apps take up 2.5GB this combined totals around 5GB. I have a 16GB iphone 4s.
16GB minus 5GB (my calculated usage) equals 11GB remaining. Allow for some required space utilization (let's say 3GB) and that leaves 8GB remaining. Why does my phone indicate 840MB available? That seems to equate to the amount shown in itunes that indicates 8GB of "other".
What is this 8GB of "other" that is taking up so much storage space on my iphone?
Thanks in advance.
John

johncdaly1955 wrote:
In itunes my iphone shows up as having nearly 8GB of "Other"...what is taking up all this space?
Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup...
But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup...
Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info Here...
maclife.com/how_remove_other_data_your_iphone
More Info about ‘Other’ in this Discussion
https://discussions.apple.com/message/19958116

Deleted a free version of PDF Max after purchasing the pro version. That resulted in missing data on the pro version too. Please help

Last week, I purchased the pro version of PDF Max and today deleted the free version since I am not using it anymore.
I don't what happened or how, this also resulted in missing data on the pro version. I created loads of annotations and notes using the pro version. Now, all that's missing. I am using the word "missing" because I think the data (notes and annotations) is still there but its just not showing up in the app. Since, the size of the app did not change. It still is 1.24gb on iTunes. Can you guys please help me recover or should I say figure out a way to display the files on the app? Pretty please!

I'm not familiar with the specific app, but generally speaking if the free and paid versions of an app are separate (i.e. not an in app purchase), what you are seeing will be the case. the only resolution I know of is if the vendor provides an account and stores the data online, or it integrates with something like DropBox. If not, once the old version is deleted, the data is pretty much gone.

I have Adobe Reader X on Windows Vista. Why doesn't the Printer for Adobe PDF show up in my Hardware/printers? Or can I add it to the Hardware/Printers?

I have Adobe Reader X in Windows Vista. Why doesn't the Adobe PDF show up as a printer in my Hardware/Printers? Or can I add it to the Hardware/Printers? And how?

Adobe Reader - FREE - reads PDF files, prints them, fills forms.
Adobe Acrobat - $$ - as Reader, and makes PDFs and edits them, sorta, and does a bunch more.
So if you had Acrobat try and find the license to avoid having to pay again...

PDFs show up as having "0" data on the recipients email

Similar Messages

Maybe you are looking for