Pdfs showing double when displayed within browser ff33.1.1 on mac osx 10.7.5

says it all - i have to reopen the link with the pdf in safari inorder to read it

Hi taranga67,
Does this happen in Firefox Safe Mode?
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Similar Messages

  • How to "Show notifications when display is off"

    Hi,
    In Mavericks Beta the notifications from Mail, Messages, Facebook etc. were displayed even when the screen was turned off. It lit up the screen for a while showed the notification for few seconds and then the screen was turned off again. I really liked that feature cause I could see whats happening on my iMac even if I wasn't using it.
    In this Apple document this feature is still described http://support.apple.com/kb/PH14360?viewlocale=en_US&locale=en_US
    Show notifications when display is off or locked
    Get alerts when your display is off or your Mac is locked.
    But the option to enable it is no longer in the Notifications settings, instead there is "Show notifications on lock screen".
    So please let me ask, is there some possibility to show notifications on turned off display? Maybe by editing some preference file or something like that?
    Thank you very much for answers.
    Best Regards
    Milan

    I too would like to know a way around this problem. In the prior version of iCal, you could enable alarms only when iCal was running. I routinely sync three computers, sometimes hours to days apart. So unless I remember to turn alarms off prior to shutting down the machines, the alarms are not properly updated upon syncing when an idle machine is turned back on.
    Hope this makes sense. Either way, it would have been better if Apple had not gotten rid of this feature in the new iCal.
    Eddie

  • HT5527 When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

    When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

    Note that the method for paying to continue your complimentary storage isn't entirely intuitive:
    If you wish to continue your current storage level, the instructions are here:
    http://support.apple.com/kb/HT5527
    Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

  • Web fonts are blurry/muddy when displaying in browser

    It seems that the CSS code that Muse generates lacks a reset or clarification of font weight, either of which would fix this problem (for example, see here: http://css-tricks.com/watch-your-font-weight/). Will this bug be fixed in future versions of Muse? I hate having to go in and fix stuff like this myself, it makes using Muse too cumbersome, as every time I make a change to the site in Muse, I then have to export the files and re-edit them by hand again.
    Thanks Muse team, not trying to be discouraging at all, and I really do think you're doing great work—we all know these things take time to perfect!

    Hi Brad,
    Thanks for your quick response! Here's section of a website I'm working on when I'm still in Muse:
    And here is that same section when displaying in Chrome (looks like this in Firefox, too):
    See how all the text looks weirdly stroked/muddy?
    Thanks again!

  • Check box showing double when PDF opened in Preview

    I'm setting up a simple check box functionality on a PDF my company sends out. I noticed the check boxes look strange when the PDF is opened up in Preview on Mac. Not sure about PC as we don't have one here. It appears to look fine in Acrobat but I believe a good portion of our clients will use Preview. What you see in the image below is the result when I make a check box and change the color to blue green. The black check mark over it comes out of nowhere. My temporary work-around is to make the check mark art invisible so just that crappy black line shows up instead, although I hate the way it looks.
    Any help is much appreciated, thanks!

    You should always include a link to the FREE Adobe Reader with advice that best results will be seen using it when you distribute a PDF.
    Of course you cannot control what others will use, but if you expect them to use Preview you need to dumb down the design accordingly.

  • Adobe Customization Wizard X issue PDF icon and disable display in browser after installation

    I have used the Adobe Customization Wizard X wizard to setup a .MTS files for the custom install. When this is installed using SCCM 2012 with command (msiexec /q /i "\\Server\Share\AcroRead.msi" TRANSFORMS="\\Server\Share\AcroRead.mst") this all works fine but all PDFs on the machine that gets this deployment (Windows 7 x64 or Windows XP x86) the icons for the .pdf don't show the Adobe icon they show the generic Windows icon when the program is not assigned but still work to launch Adobe reader. I have tried to unistall and reinstall but still the same resaults. If I install the .msi with no .mst the icon shows up just fine. So it has to be something with when you use the customization wizard or the .mst. I have also tried assigning .PDF to another program and the icon changes to that program and assign it back and no icon. Also if I set Display PDF in browser = Disabled this setting does not stick. I have just installed via Adobe not using SCCM via command line I get the same resaults.
    I have only selected these customizations:
         Installation Options:
    Silently (No interface)
    Suppress reboot
         Shortcuts
    No desktop Icon
           EULA
    Suppress display of End User License Agreement (EULA)
         Online Features
    Disable all updates
    Disable Help > Purchases Adobe Acrobat
    Disable Product Improvement Program
    Display PDF in browser = Disabled
    Disabled  All Acrobat.com access

    Hi Ben,
    Here's what I am trying to accomplish I had Acrobat Standard v10.1.4 scripted so I can deploy it to a Citrix Server (XENAPP6) via SCCM 2007 I have at least 50 licenses of Acrobat Standard deployed to 50 users. All of our Citrix Servers have Adobe Reader v10.* installed as our default pdf viewer. There are other apps that are deployed to this Citrix Server and I wanted to make sure that pdf files open on Adobe Reader instead of Acrobat Standard.
    I had to change the installer tables directly so I don't have to get it re-scripted to use this command line. Is it a best practice not to change the isntaller table?
    msiexec /i "\\source\Acrobat10\AcroStan.msi" transforms="\\source\Acrobat10\AcroStan.mst" LEAVE_PDFOWNERSHIP=”YES” /qb /norestart
    Thanks a lot for your help I'm looking forward to hear from you.
    Regards,
    William

  • Url iview showing error when displaying a page with frames

    Hi,
    I have a requirement of putting a site in a url iview in the portal. I created a url iview and when I preview it, it displays correctly. When I assign this to a role and access it through the navigation, it gives an error.
    The weird thing is that, it works sometimes and it does not work sometimes. The url I am trying to display is working fine, because even when the portal shows error, if I try the url straight from the browser, it loads without any errors.
    So what could be the problem? The site I am trying to display contains frames. Could this be the problem? If so, why is it working sometimes and does not work sometimes?
    Thanks in advance.
    Regards
    Ranjith

    Hi Martin,
    The issue is still there. But one interesting thing that was noticed by my team mate was that if you add the site to the list of sites on browser which can use cookies, everything works fine. Similarly, if I reduce the privacy setting of my browser to Low, it works fine.
    Again, even if you keep the privacy setting as Medium and does not allow the site to use cookies, the iview opens fine if you open it in a new window.
    Any thoughts on this?
    Thanks & Regards
    Ranjith

  • Error: Cannot Display Page----showing error when displaying SRS window.

    Hi All,
    Iam getting error when trying to display concurrent Program result view page i.e 'FNDCPREQUESTVIEWPAGE'
    You cannot complete this task because one of the following events caused a loss of page data:
    Your login session has expired.
    A system failure has occurred.
    To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
    i wrote the code there in the link http://oracleanil.blogspot.com/2009/04/steps-for-insert-in-eo.html
    Please anybody tell me what the reason behind this error.??
    Edited by: 881533 on Nov 10, 2011 1:15 AM

    Hi,
    This page normally dont have back button ,
    if u use browser back button some times it throws error,
    Create a link on this page using personailization and call some function to navigate to the page which u want,
    u can navigate u another page using the link instaed of using broeser back buton.
    Thanks
    Raju

  • How do I fix PDFs not opening when embedded within a PPT?

    I've several PDFs embedded within various Powerpoint PPT files which I simply cannot open - depending upon the laptop I'm using.  When I use by business laptop to open the embedded PDF, I get the message: "The server application, source file, or item can't be found, or returned an unknown error.  You may need to reinstall the server application." On my business laptop I'm running Windows 7, Adobe Reader X, Adobe Acrobat 9, and MS Powerpoint 2007.  When I use my home/personal laptop, the PDF opens up without any errors.  My home laptop runs Window 7, Adobe Reader X, and MS Powerpoint 2007.  It's weird.  I can open embedded MS Excel and MS Word files within the same PPT files on any laptop, but not embedded PDFs.  Any idea what's going on here?

    Sadly,  I have never had luck with the OLE Embedded Object that you put into Office application documents (Word, Excel, PowerPoint).  The OLE objects embedded get corrupted and cannot be extracted.  While it's true that there are two other instances where you could get this error:
    1) The OLE server application (Acrobat or Reader in this case) is not properly registered with the system
    2) Possibly Protected Mode/Protected View in Acrobat is blocking the execution of the OLE Server Application
    I wouldn't bet on it.
    In the future you may want to use a PDF Portfolio where you can attach both Office and PDF files within the Portfolio envelope.

  • Strange query behavior when displayed in browser.

    Hi gurus,
    when I open a query in browser on one of the computers, I get no detailed cells, just the overall result.
    No matter, if I open the query in Portal, or in BEx Web Analyzer.
    When I use BEx Analyzer, everything seems to be fine.
    When I open the same query, on the same user, but on another computer, queries are displayed properly.
    Do you know what might cause the problem? Maybe some browser settings?
    Regards,
    Dorota

    Thanks, we recently installed a new GUI version on this computer, so probably you're right

  • Any PDFs show "damaged" when I want to open it on OS X 10.8.3

    I changed from Microsoft to Apple few weeks ago.
    I have an iMac OS X 10.8.3. Everything is new installed, also Adobe Acrobat Reader / Professional 11.xx (Version).
    And when I want to open some of my PDFs, which I used to open with Microsoft, then I get the information: Damaged.
    If I send the same PDF to a PC to let it open, it works without any problems. This also happens with Word-Documents too.
    What shall I do?
    Thanks for any advises, tipps etc..
    Nathalie

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • PDf shows black when using PMS color

    I made a file for a postcard using 1PMS color & bk in ID6. When i exported to make a pdf - all looks fine.
    when i went to mai to client and i previewed in email b4 i sent, it appeared bk only. I snet to clent and the PMS show black. Any suggestions?

    I can't replicate your problem. Here's a PantoneReflexBlue PDF/X-4
    http://www.zenodesign.com/forum/REFLEX.pdf
    This is a long shot but did you rename the new X-4 pdf? If it has the same name maybe the old version is somehow being cached on your client's machine.
    The preview won't matter for the printer—it doesn't affect the separation when the job is spot color.

  • Pdf files blank when opened in browser on linux

    I am running Ubuntu linux 8.04 and 10.04. When I open a PDF file in the browser, I get a blank screen. I am able to open the document in its own window. I am not getting any error message.
    I first had the problem on Ubuntu 8.04 using FF 3.6.15. I also have the problem on Ubuntu 10.04 using FF 3.6.15. I have installed FF 4.0b13pre on Ubuntu 10.04 and I still have the same problem.

    Yes, that's a plausible explanation.
    Never having locked a Numbers document, I don't have first hand experience.
    I put my sensitive documents in an encoded disk image file. Less bother. But then, I'm not e-mailing sensitive documents or otherwise exposing them.
    Jerry

  • Help ! web page navigation links are not broken but do not show up when viewing on browser

    multiple page website in progress, links checked site wide; none broken...linked all pages relative to: Site Root.When opening content file and index.html file on my desktop only the background color appears. What have I overlooked?

    Nancy O, since you were kind enough to respond I thought that I would ask you for more help.  I took your suggestion and also went to the Adobe  DW help / preview pages section this is what I found:
    Note:  Content linked with a site root-relative path does not appear when you preview documents in a local browser unless you specify a testing server, or select the Preview Using Temporary File option in Edit > Preferences > Preview In Browser. This is because browsers don’t recognize site roots—servers do.
    Nancy O  I linked the 12 pages together as Site Root-Relative and I do as you said to no avail.   Since this website does not have a domain name (yet);   is it possible that I may have to relink all as Document-Relative? and if so is there a faster way than manually switching one by one ( it's over 270 links)    Thank you again for your help.

  • Links in PDF not working when viewed in browser

    Whenever I view an interactive PDF in a Firefox window the links in the PDF don't work. They work in other browsers like Chrome and Safari, but in Firefox they are as dead as normal text.
    It also says: "This PDF document contains forms (even though it doesn't). The filling of form fields is not supported."
    Why is Firefox's PDF viewing and editing capabilities so poor when all the other browsers have not trouble with it?

    hello, the pdf viewer is still somewhat experimental and under very active development - you could try if the same error is occurring in the current development version, which you can download as an addon from http://mozilla.github.io/pdf.js/extensions/firefox/pdf.js.xpi
    in case it has the the same rendering problems, you could then file a bug report at https://github.com/mozilla/pdf.js/issues (a github account is necessary for it though) - please also provide a sample document where the error is apparent!

Maybe you are looking for