PDImageSelectAlternate "is obsolete and never called in Acrobat 8". How switch to alternate images?

PDImageSelectAlternate "is obsolete and never called in Acrobat 8". Then how can I switch to alternate images to display in Acrobat 8 and 9?

The goal is to speed up screen redraw (using low resolution proxies). High-end prepress software usually provide option to generate alternate images while "normalizing" incoming PDFs. And (at least) Enfocus Pitstop can switch on/off their display in Acrobat 8 and later. The question is how they do it, if PDImageSelectAlternate "is never called". Well, I chose this subject as practice for my first plugin, because it seemed to me straightforward and simple. It looks like I was wrong.

Similar Messages

I purchase a movie with my ipad but i sold it and never synced it with itunes how do i get the movie back??!

i purchase a movie with my ipad but i sold it and never synced it with itunes how do i get the movie back??!

Unless you are in the US then films can't currently be re-downloaded from the store (and not all films can be in the US). If you are in the US then you could see if it's in the Purchased link on the left-hand side of the iTunes store home page for re-downloading : http://support.apple.com/kb/HT2519

When downloading Creative Cloud, it stalls for long time and never completes the download. How can I resolve this issue?

When downloading Creative Cloud, it stalls for a long time and never completely download. How can I resolve this issue?

CueTheArts for information on how to resolve download errors please see Error downloading and installing Creative Cloud application. You are welcome to update this discussion if you have any questions regarding the steps listed within the document.

Gone, and never called me mother

A major problem has happened today on iTunes 6.0 on my PC. It was working fine up this afternoon, but I've just booted it up & my whole library of tunes (both off CD and the many MP3's i've downloaded over the last year and a half) have just dissapeared. Not. There. Anymore. I've not touched them in the interveining time & a system restore hasn't sorted out the fault.
Is there any way I can get my lirbrary back without having to spend time I haven't got re-ripping CD's (the MP3's are alright, as they're in a safe folder)?

The below link should point you in the right direction. A word to the wise, unless you created a restore point before you install an application then doing a system restore could just harm your system more. It just sounds like your itunes databse is corrupted.
http://docs.info.apple.com/article.html?artnum=301895
Please oh please make backups of your music and itunes database files on a regular basis. Its also wise to make copies of the db files before doing any upgrade in case something happens.

Switched from Blackberrry to iphone. I can't highlight phone numbers in contact notes and make calls from that number, how do I make a phone number "live" ?

How do I make email addresses and phone numbers in the notes section of contacts, "live"? I could run curser over number in Blackberry and could intiate call or email by clicking on it. I have some of those "live", but most are not. How can I change to "live"?

If I go to my notes app ( not a note in a contact) and I add a phone number and tap done the number becomes live. However if I then copy the live number from the notes app and try and paste it into the notes field in a contact it is no longer live. Weird huh

HT5312 It's keeping ask me about security question answer and never add a security questionnaire how it's that possible?

Hi a when I want to install a application it's keep ask me about answer a security question and I never add a security question. Thank you for you answer

If you log into your account via http://appleid.apple.com, and select the Password and Security section on the left-hand side of that page are you able to set them ?
If not, then from http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address, sign in to My Apple ID and select the “Password and Security” tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID password, sign in to My Apple ID and select the “Password and Security” tab to reset your security question.
If you have one security question, but don't remember your Apple ID password, contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Lol, I am new to Mac, never called during 90. How/where can I learn basics. Nearest Apple store is 1 hr away. My wi fi keeps dropping. I guess thats why my email isn't loading??? Any help much appreciated.

Everytime I get near this Mac I do something to it. Today I have managed to make my screen small and have no idea how to make it bigger.

I suggest you buy David Pogue's "The Missing Manual for Lion" which is an excellent teaching resource. You might also try Mac For Dummies (no slur intended) and read the manual for your model Mac.

I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. W

I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. When directed on Adobe's site to access the serial number, it takes me to an outside 3rd party site, which I tried but it does not actually work. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hey beccac85068042,
Adobe will provide you the serial number only if you are a registered user.
Please refer the following link to know more on registration for Adobe products:
Adobe product registration FAQ
You might Contact Customer Care and seek help on the same.
Regards,
Anubha

JButton pressed, but not released and actionperformed never called

Hi,
I have a simple JButton, with one action listener that does its thing (or at least should do because it is never called). I also added a mouse listener to trace the issue further.
Here's what happen. I have another component (a JTextField) with a focus listener. If the compoent looses the focus, I want to have a chance to ask a quick confirmation question (JOptionPane) before continuing to do someting else (in that case, process the action on the button).
So the focus is in the text field and I click on the button. Here's what happen:
- The button gets a mouse pressed event
- The text field looses the focus and the button gains it.
- The text field's focus lost handler shows a JOptionPane => focus goes on the option pane
- The option pane is confirmed, but the rest stops.
I get NO mouse release event on my button, the action performed is also lost and my button remains "half pressed" (when i hover the mouse pointer over it, the button is rendered lowered ).
My guess is that the option pane comes too quick and that the mouse release event is transfered to the option pane instead of the button I first clicked, causing the actionperformed to be ignored as a side effect.
Any ideas or suggestions ?
Thanks.

I get NO mouse release event on my button, the action
performed is also lost and my button remains "half
pressed" (when i hover the mouse pointer over it, the
button is rendered lowered ).
basically that's a bug in the button's internal state handling.
To get an idea about how to fix it, you might want to read my article "Make Buttons Respect InputVerifiers" at
http://www.mycgiserver.com/~Kleopatra/swing/swingentry.html
Though it's rather old the issue is not solved (until 1.5b2) It's only applicable if you have tight control over the L&F.
Greetings
Jeanette

I can't make calls on my Samsung Galaxy S5. This problem just started in the past few days. When I try and make a call, it will never ring and the call will cancel.

Just had this issue come up. When I go to make calls, it never rings. It will eventually cancel the call. Also, when people try to call me, they say it will either ring and never reach my voicemail or they will instantly get my voicemail. This does not occur on all calls. I have good/great service, have done a reset, checked my SIM card, checked airplane mode, etc. Nothing seems to resolve the issue. Anybody else dealing with this or know how to resolve it?

We want to get your calls back in action, duckcallr1! Did this start after installing new app or update? Have you tested this in different areas? Are your text and data connections still going through?
YaleK_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

ReadObject() and writeObjectO never called

I have classes to transfer images through RMI. ImageDescriptor interface provides basic method to override:
public interface ImageDescriptor extends Serializable
public void paint(java.awt.Graphics g, int x, int y, int width, int height);
}BinaryImageDescriptor is used for transferring binary data. It worked but byte[]->Image transform took some time (done once in the paint method, which caused a delay while painting for the first time) so I decided to move this routine to a method and call it when object is deserialized:
import java.awt.*;
import javax.imageio.*;
import java.nio.*;
import java.nio.channels.*;
import java.io.*;
import java.awt.image.*;
public class BinaryImageDescriptor
    implements ImageDescriptor, Serializable {
private byte[] imageData = null;
private transient Image image = null;
private transient boolean updated = false;
private transient ImageObserver observer = null;
public BinaryImageDescriptor(byte[] imageData) {
    this.imageData = imageData;
    updated = false;
public BinaryImageDescriptor(String fileLocation) {
    try {
      File file = new File(fileLocation);
      FileInputStream fis = new FileInputStream(file);
      FileChannel fc = fis.getChannel();
      int filelength = (int) file.length();
      MappedByteBuffer mbb = fc.map(FileChannel.MapMode.READ_ONLY, 0,
                                    filelength);
      this.imageData = new byte[filelength];
      mbb.get(this.imageData);
      System.out.println("Binary Image Success: " + fileLocation);
    catch (IOException ex) {
      System.out.println("Binary Image error: " + fileLocation);
      this.imageData = null;
public void updateBinaryImage() {
    System.out.println("Update Binary");
    try {
      image = javax.imageio.ImageIO.read(new ByteArrayInputStream(imageData));
    catch (Exception ex) {
      image = null;
      ex.printStackTrace();
public void paint(Graphics g, int x, int y, int width, int height) {
    // Previously I used to read Image here by calling updateBinaryImage() once
    if (image != null) {
      g.drawImage(image, x, y, width, height, null);
public void setObserver(ImageObserver observer) {
    this.observer = observer;
private void writeObject(java.io.ObjectOutputStream oos) throws IOException {
    //This method is never called
    System.out.println("Inside write Object");
    oos.defaultWriteObject();
private void readObject(java.io.ObjectInputStream ois) throws
      ClassNotFoundException, IOException {
    //This method is never called too
    System.out.println("Inside readObject");
    ois.defaultReadObject();
    updateBinaryImage();
public byte[] getImageData() {
    return imageData;
}But the problem is, the readObject() and writeObject() (on the server side) are never called. So the Image remains null and nothing is painted.
Could you help?
ps: I do not obsfucate the code. Some package definitions are removed (due to propriarity) but the code compiles fine.

silly mistake of me, fixed. error outside the code.
---CLOSED---

SaveState and restoreState never called after upgrade to JSF2.1.1

Hi,
I upgraded my project to JSF2.1.1.
For all my custom compontent the saveState and restoreState is never called.
Are there any required changes due to JSF2.1.1 release?
Thanks in advance,
Pieter

Most likely, this will fix your issue:
1: http://docs.info.apple.com/article.html?artnum=93698
Also clean up your temp files:
(Empty your Temp directory and restart)
2: http://docs.info.apple.com/article.html?artnum=93976
If you get an error when uninstalling quicktime, go through article 1, then run the Microsoft Cleanup Utility to remove quicktime afterwards:
3: http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am un to date on the OS also.

My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am up to date on the OS 7.1.1. Video and audio is froze on my end, only video freezes on the other end. It doesn't make a difference who makes the call either.

No, there isn't any setting that you are missing. Have you tried force closing FaceTime, and resetting your iPad?
In order to close FaceTime, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not make a difference, you could try resetting all settings, if you reset all settings you will have to enter all of the device preferences again in the settings app. That takes some time to accomplish, but you will not lose my data, media, apps or anything like that. Settings>General>Reset>Reset all settings.
If that doesn't help, the next step would be to restore the iOS software. Backup your iPad first, restore the iOS, then restore the backup.
Use iTunes to restore your iOS device to factory settings

My iohone5 signals incoming call. Then, immediately Blocked Call is displayed! With no further information re caller. I have just switched from iPhone 4 and never had experience with Blocked Call! Message . How can I at least find out who or what blocked

MY iPhone 5 keeps blocking incoming phone calls with a message "call blocked" there is no addition information on who/what is being blocked or why. I have just transitioned from iPhone 4 to 5 and never had this happen before. Does anyone else have this problem? How does one find out what/who is being blocked?

If a user has blocked their caller ID there's nothing you can do but either answer the call or don't.
This is NOT a problem, this is how blocked calling works.

PDImageSelectAlternate "is obsolete and never called in Acrobat 8". How switch to alternate images?

Similar Messages

Maybe you are looking for