PDK  6.0 Software Component and SCA File Not Found

We are caught in a scenario where we don't find the PDK 6.0 Software Component in the SLD and we are not sure how to get this in the SLD. In the current SLD(SP16) it shows PDK 5.0 Software Component. Also kidnly let us know how to get the SCA file in order to be able to Check-In in the CMS against the PDK 6.0 Software Component.

pjmorce wrote:
I have a little web service that works fine when i deploy it on a tomcat 6.0 server using eclipse.
It is used to transform a XML file (that contains a reference to a file img/logo.gif) into a PDF file. The PDF file is generated with that logo.
The img/logo.gif file is into a JAR file used the WS.
Remove the img/logo.gif from your JAR and deploy the web service again on tomcat 6.0 with eclipse.
You will probably see that the service works fine because it never loaded your GIF from the JAR. It is more likely the reference out of the XML is interpreted as path on the file system.

Similar Messages

  • "Error Result code = -43" AND "Audio file not found"

    In Garageband I was trying to  click Join, but kept getting "Error Result code = -43"
    What does this mean?
    Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

    mcgregorsgal wrote:
    so do I have to basically start over?
    for that one recording, it looks like it.
    the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

  • Backup drive and transferred files not found

    I recently purchased a time capsule. I transferred some files from an older hard drive to the TC (they appeared on the TC) and then backed up my PowerMac G5 (wired directly) and my MacBook Pro (wirelessly) to the TC. The initial backups for these two computers worked fine, but I am now encountering two problems.
    1. The files I originally transferred from the old hard drive now don't appear on the TC (although it looks like they might be there based on the amount of TC drive space occupied). Is there anyway to access these older files (assuming they are still there)?
    2. Frequently when I try to enter TC from the PowerBook Pro, it says that hard drive not found. Also, it doesn't back up automatically. The only back ups are those I have done manually. The TC seems to be working fine with the wired PowerMac G5.
    I would appreciate suggestions on either topic.

    1. Have you changed the file sharing access on your Time Capsule since you copied your files? When you use the Time Capsule file sharing without accounts setup you have access to all of the disk. When file sharing with accounts is enabled you have access to a Shared file (where everyone has access and where your Time Machine backups are kept) and then to your own personal file (where only you alone have access). You no longer have access to anything that is not in the Shared file or your account file. If you have enabled account access then I would suggest turning it off which would then give you access to the whole disk and then moving the files you are referring to either into your Shared folder or your Account folder.
    2. Go to System Preferences, Time Machine, and then Change Disk. Select the name of your Time Capsule (this won't overwrite or delete any of your previous Time Machine backups). This should hopefully fix the problem.

  • My iTunes wouldn't update and so I tried to reinstall the new version, my computer restarted and when I clicked on iTunes, it said file not found.

    I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!

    Hi Applefan 6968,
    If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
    Apple Support: Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Regards,
    - Brenden

  • File not found error from scheduler

    Hi,
            We have a scheduler file with .cfa extension  in the cf scheduler  which trigger some mails to certain recipients on execution.
    At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
    path. On direct execution of the given url, the  file is executed successfully and mails are fired.
    But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
    found the error message 'File not found'.
    Is it possible that the file get  executed when directly browsing the url and shows 'file not found' error
    while executing via cf scheduler?(CF 8 is used.)

    To be more specific,
    the url format given in the cf admin scheduler is like this:
    "http://www.domainname.com/myfolder/myfile.cfa"
    A file path to log the output is also given to publish.
    If we copy the above url to a browser and execute, the file gets executed and mails are fired.
    If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
    showing error '/myfolder/myfile.cfa' file not found.

  • Upload Third Party Software Component and assignment to Track

    Hi,
    I created a Track where I have to add a Third-Party Software Component (HMVCGLXBRIDGE.sca).
    How can I upload Third-Party Software Components and make it selectable for adding it to the Track under SAP NetWeaver Development Infrastructure > Change Management Service > Landscape Configurator > [Track] > Add SCu2026
    THX for any comment
    Regards

    Hi Pascal,
    my structure in detail
    Track: BOM
      Product: SalesBOM
        Software Component: SC_SALESBOM
          Dependencies (Context: BuildTime): BPEM Buildt 7.12, ..., HMVCGLXBRIDGE, ..., VC FREESTYLE KIT 7.12
    --> I added the SC "HMVCGLXBRIDGE" afterwards in the SLD und after an update and synchronisation in CMS it is also not shown
    I checked the HMVCGLXBRIDGE.sca and there are two files in the BUILDARCHIVES folder:
    - test.sap.comhm-vc-glx-bridge.dcia
    - test.sap.comtcvcglxbridgecomp~.dcia
    Furthermore there are this folders:
    DEPLOYARCHIVES
    - test.sap.comhm-vc-glx-bridgetest.sap.com~hm-vc-glx-bridge.sda
    - test.sap.comtcvcglxbridgecomptest.sap.comtcvcglx~bridgecomp.ear
    META-INF
    - MANIFEST.MF
    - SAP_MANIFEST.MF
    You can also download the file at SDN [right here|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5011e388-9417-2c10-14a5-b79912aad1ea].
    At "LocalDevelopment" in NWDS everything works fine but I need this SC in a track!!!
    I have the feeling that it stuck at a little little point
    Regards

  • Sequence of Installs of RTA and SCA files for GRC AC 5.3

    Hello,
    I would like to confirm the correct sequence of applying RTA and SCA files for GRC AC 5.3.
    On ABAP Stack
    1- Install VirsaNH RTA on ECC 6.0 System with SAINT
    2- Install VirsaHR RTA on ECC 6.0 system which has SAP_HR
    3- Install both VirsaNH RTA and VIRSAHR RTA on a system which is SAP HR
    4- Install VIRSANH RTA on BI System. (There is no need of VirsaHR on BI system)
    5- Install all Support Packages up to 10 or 11 for VIRSANH & VIRSAHR with SPAM
    Next
    On JAVA Stack
    6- Install
    VIRCC00_0.sca
    VIRAE00_0.sca
    VIRRE00_0.sca
    VIRFF00_0.sca
    7- Install VIRACLP00_0.sca
    8- Then install VIRACCNTNT.SAR
    9- Next install EP RTA VIREPRTA00_0.sca
    10- Install all Java patches for the above components
    Based on the above,
    a- Plz confirm if the above sequence is right.
    b- My question is can I install 6, 7,8, 9 with JSPM at once as one step?
    c- Also can I install SCA files with JSPM first and then install RTA files on ABAP stack later?
    d- Also we have BI system with ABAP & JAVA Stacks. Is VIRSANH sufficient for both ABAP & JAVA, or do we need an additonal RTA for BI JAVA ?
    Thanks for your valuable inputs in advance.
    Regards,
    Haleem

    Hi,
    > 1- What is the UME of your BI Java stack ?
    >
    > Answer: We have installed BI JAVA, EP, EP Core, so we use SSO with EP and BI ABAP. So the portal is UME for BI Java stack.
    >
    Check below link which will answer your queries:
    Java RTA for GRC 5.3
    > 2- Check SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
    >
    > I checked the note 1174625, which says the following
    >
    > All of the sap.com/grc files have to be undeployed except the db and dictionary files for each component. The files that are NOT to be undeployed are:
    >
    > - sap.com/grc/ccxsysdb
    > - sap.com/grc/aedict
    > - sap.com/grc/redictionary
    > - sap.com/grc/ffdb
    >
    > Since this is a GRC AC 5.3 install on a fresh Netweaver 7.0 EHP1 Java stack install, do I need to undeploy all the above components, before doing AC 5.3 install, as mentioned in the note.
    >
    This is used when you do upgrade your old GRC release to latest one. So if you are doing fresh install then you need not to do these steps.
    > 3- Also this note 1174625 answers to most of my questions, but does not mention anything about VIRACCNTNT.SAR.  Is >this SAR file installed on JAVA Stack or ABAP stack? Is there a OSS note on VIRACCNTNT.SAR?
    >
    This file contains Roles, Rules, functions for RAR, CUP, ERM etc. in txt files which you need to upload when you will do the configuration of GRC.
    Thanks
    Sunny

  • Software component and unit in PI 7.0

    can you distinguish bw software component and unit in PI 7.0.
    since unit is not available in XI 3.0.

    S/w Unit is a logical link between Product version and SWCV.
    S/w unit contains information of product version and this infomation can be shared across all software component version related to that particular product version.
    A product can have many S/w units and a S/w unit can have many SWCVs
    Regards,
    Prateek

  • Difference between SAP Software Kernel and the files in Kernel Directory

    27.     What is the difference between SAP Software Kernel and the files in Kernel Directory

    well... the OS kernel is for the... "OS" and the SAP Kernel is for.... "SAP"
    A kernel is the core of any application, basically is a set of programs and parameters that tell the system how to behave.
    Regards
    Juan

  • Revert Portal transport package .epa file and .sca file

    Hi,
    Recently we have imported one transport package .epa file (through transport package import editor) and imported one .sca file (though SDM) in Portal Quality system.
    Now we want to revert both the transport package .epa file and .sca file in Portal Quality system.
    Can anyone tell us the procedure?
    Thanks
    Phani

    Hi Phani,
    You can find the previous version of SDA/SCA's in the following path
    Go to SDM -- Deploy tab-- there is little black arrow pointing up in the bottom right corner. Click on it to expand the menu and one of the options will be "Deploy SDAs/SCAs that have any version.
    Please refer this link for more information
    To undeploy .sca
    Hope this helps you...
    Regards,
    Saleem Mohammad.

  • I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\  verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

    error 13.11 Source file not found verify that the file exsist

    Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Mindstorm software conflict "resource files not found"

    Hi All,
    my apologies if this is addressed elsew in the forum - searched but did not find any entries.
    I am co-teaching a robotics class to middle school students (Lego FLL) and a class to the high school students using LabView 2009 + Lego kit. After installing the Labview environment I (as well as my co-teachers) can no longer run the Mindstorms software. THe error reported is bout resource files not found.
    Co any one shed some light on how to have both environments co-exist on the same laptop?
    Many thanks
         Raynier van Egmond
         Vashon Island (WA) USA.

    Hi there. Not a problem.  This is probably a known conflict between MINDSTORMS 1.0 and LabVIEW.  It can be fixed easily.  Please see http://digital.ni.com/public.nsf/allkb/4B0C1BBDA9CFEBE7862573D0005D93C4
    This might have also affected MINDSTORMS 1.1 but I can't recall.
    Joel Sumner
    NI-Shanghai

  • How to use GarageBand at school and avoid getting 'File Not Found'

    Last year we used Audacity and this year we used GarageBand to create podcasts.
    We had students keeping their GarageBand project files on their USB sticks so that they could also work at home but many of them lost their work because they would get the message 'File Not Found'. The only work around we could come up with was to assign each student a computer and force them to only work on that computer and save their work in the GarageBand folder.
    Why is it not possible to use GarageBand projects across multiple computers by transferring with a USB? I even had them do drag and drop from the GarageBand folder to their USB instead of doing Save As but neither worked without errors.
    Sadly, many of these 160 students now have a negative opinion of Apple products and Apple software. I still like GarageBand, but it doesn't seem like a very good option for educational uses unless there is some sort of workaround that will allow my students to work on their projects on multiple computers.

    the only immediate thought is that you didn't format the USB drives for Mac OS. GB files require it, they won't work under other formats

  • Spc.fp and spc.h not found, How can I get these files

    Hello
    I get a project from my friend, I opened it and built it, then there was an error, spc.h file not found.
    Then I double clicked on the file spc.fp , it told me that the spc.fp not found.
    I have used everything to search them , but I got nothing
    Does someone can help me to get these files? 
    Thank you!
    Clasu.

    .fp files are small libraries of functions ("Instruments") normally associated to specific devices (e.g. a scope, a DMM or something similar) or to specific softwares (CVI comes with a set of instruments like the Programmer Toolbox, the Password Control and so on).
    spc.fp may relate to Statistical Process Control Toolkit for CVI, a product whose only references on NI site date back to 1998 and is not listed any more among toolkits for CVI.
    Can you ask your friend if my hypothesis is correct?
    I do not know of any other standard CVI instrument with that acronym: could this .fp be a library of functions your friend wrote by himself?
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Error Message on U150 - "Bluetooth Software license file not found. [2]"

    I've installed a Microsoft Presenter Mouse 8000 on my new Lenovo U150 and now I get an annoying message at startup "Bluetooth Software license file not found. [2]". Everything seems to work fine, but I can't get rid of the message. Any one have any thoughts?

    regkey : hkclass\.wid
    valuename : shellex
    value :
    this registry was under file associations. after you do your scan and it shows you your list of problems click the file associations and add the file above to the ignore list. this should fix your problems.

Maybe you are looking for