PDK Content on NW2004S SR1 missing

In our nw2004s-SR1 productive installation of EP,
we are missing the menu-point "Java Developer".
We know, that these menu-point comes with the PDK-Content
SCA-Archive, which can be downloaded from SDN.
Our goal is, to install the Productive-EP similar
to our SneakPreview-EP.
We tried already to install the PDK-SCA Archive via
SDM, but it fails.
I can't believe, that the PDK-Content SCA-Archive from
SDN is the right PDK-Content for a productive environment.
Will be nice, if anybody can help us.
Regards, Alex.

Hello Marc,
I ran into the same issue. After a lot of trial and error I eventuelly found out, was the problem was...
I had to do two things to resolve this:
1. Download the XML file containing the SP stack definition:
-You'll find the instructions for downloading this file on the Support Package Stacks Download Page for NW2004s in the box 'Additional information'.
-Put the XML file in the JSPM inbox (Folder '/usr/sap/trans/EPS/in' on a standard installation).
2. Update the SDM:
-Download the file with the description 'SP07 for SAP SOFTW. DELIV. MANAGER 7.00' from the Support Package Stacks Download Page
-SAP Note 860939 explains how to update the SDM
Hope this helps...
Regards,
Bjoern

Similar Messages

Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

I am getting the following error: Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)

I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

Error in phase 42 during installation of NW2004s SR1

I am getting this 2 errors in 42nd phase of installation of NW2004s SR1 in my system. Pl. suggest the solution for this.
ERROR 2007-12-13 12:42:10
CJS-30071 Execution of UTL tool 'C:\Sap_Basis\j2sdk1.4.2_13\bin\java.exe -classpath C:\usr\sap\AB8\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_jce.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_jsse.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_smime.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/iaik_ssl.jar;
CP-CHN-3F-025/sapmnt/AB8/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/antlr.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/exception.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/jddi.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/logging.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/offlineconfiguration.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/opensqlsta.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/SDMutil.jar;C:/usr/sap/AB8/SYS/global/sltools/sharedlib/SLUtil.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar -activated -prod_name=NetWeaver -usage_name=AAS -usage_vendor=sap.com -log=UTL_activate_usages.log -action=true -sid=AB8 -dsn=jdbc/pool/AB8 -ssprops=C:/usr/sap/AB8/SYS/global/security/data/SecStore.properties -ssk=C:/usr/sap/AB8/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64. DIAGNOSIS: The connection parameters are wrong or the database server is shutdown. SOLUTION: Check 'UTL_activate_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS/UTL.java.log' for more information.
ERROR 2007-12-13 12:42:10
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|enableUsageTypes was executed with status ERROR .

HI Abinash,
log says that database is shutdown.
log on user as SIDadm go commannd promt
type sqlplus " / as sysdba "
i will promt SQL> type here startup; enter u r database is startted
Then installed from that stage.
i will be work.
Amol

Content Administration Tab is missing for administrator user in NW CE 7.1

we have a issue after upgrading the portal to NW CE 7.1 SP00 RTC.
"Content Administration" Tab is missing for administrator users

In CE version, we have to manually enable by using "Content Layer Tool"
http://<host>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
This link may lead to "Portal Runtime Error" because "contentLayerTool" is port of high_safety zone
To access without runtime error, pls follow the below process.
1. login http://<host>:<port>/irj with admin user
2. concatenate the below line to browser
/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.portal.content.layers.ContentLayersTool
3. To enable content admin tab click "Activate Development Mode"

Problem installing Trex 7.0on NW2004s SR1

Dear friends,
Iam trying to install Trex 7.0on NW2004s SR1(Red Hat Linux 4.0).
1st time When I tried to install Trex 7.0on NW2004s SR1: on 2nd screen when it asked me to give the location of Trex CD then by mistake I gave the location of Trex 7.0 SR2 instead of Trex 7.0 SR1 thats why system thew some error & then I stoped the installation.After that I got the correct CD & again started the installation by running the sapinst file with command ./sapinst but this time it was showing me the following error on 1st screen itself instead of asking for the Trex 7.0 CD.
Error is :
NFO 2007-09-17 19:14:30
Working directory changed to /tmp/sapinst_exe.26782.1190036495.
INFO 2007-09-17 19:14:30
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
INFO 2007-09-17 19:14:30
Working directory changed to /tmp/sapinst_exe.26782.1190036495.
INFO 2007-09-17 19:14:30
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
INFO 2007-09-17 19:14:31
Working directory changed to /tmp/sapinst_exe.26782.1190036495.
INFO 2007-09-17 19:14:31
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
INFO 2007-09-17 19:14:31
Working directory changed to /tmp/sapinst_exe.26782.1190036495.
INFO 2007-09-17 19:14:31
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
INFO 2007-09-17 19:14:32
Copied file '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/keydb.xml' to '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/keydb.1.xml'.
INFO 2007-09-17 19:14:32
Creating file /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/inifile.xml.
INFO 2007-09-17 19:14:32
Copied file '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/inifile.xml' to '/tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI/inifile.1.xml'.
INFO 2007-09-17 19:14:32
Execute step FillCIContext of component |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0.
INFO 2007-09-17 19:14:33
Working directory changed to /tmp/sapinst_exe.26782.1190036495.
INFO 2007-09-17 19:14:33
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
INFO 2007-09-17 19:14:33
Execute step initInstallation of component |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0.
INFO 2007-09-17 19:14:33
Working directory changed to /tmp/sapinst_exe.26782.1190036495.
INFO 2007-09-17 19:14:33
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/TREX/CI.
INFO 2007-09-17 19:14:33
Account 0 already exists.
ERROR 2007-09-17 19:14:33
File not found: //TREX/COMMON/TREX.txt
ERROR 2007-09-17 19:14:33
File not found: //TREX/COMMON/TREX.txt
ERROR 2007-09-17 19:14:33
FCO-00011 The step initInstallation with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|initInstallation was executed with status ERROR
If anybody knows the solution pls reply I'll be realy thankfull & will Reward with good Reward points.
Thanks in Advance,
Sunil Maurya.

Solution
Download The OS independent part for the TREX from SAP Marketplace (service.sap.com/swdc).
Support Packages and Patches->SAP NetWeaver->SAP NETWEAVER 2004s->TREX->TREX7 ->#OS independent->TREXZZZZZZZZZZ.SAR

Java Server Startup error during sapinst NW2004s SR1

Hi Folks,
Anyone experimented this error during while installing NW2004s SR1 on HPUX, java version 1.4.2.12, Oracle 10.2.0.2 ??
Sapinst hangs at Java Startup Step for hours, Dispatcher comes up OK, but the
java Server doesn't.
Thanks for your help.
Here is the std_server0.out file :
stdout/stderr redirect
node name : server0
pid : 11322
system name : EZ3
system nr. : 43
started at : Tue Feb 20 09:37:31 2007
[Thr 1] Tue Feb 20 09:37:33 2007
[Thr 1] MtxInit: -2 0 0
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: jav
a.util.zip.ZipException: error in opening zip file
Loading: LogManager ... 3880 ms.
Loading: PoolManager ... 8 ms.
Loading: ApplicationThreadManager ... 536 ms.
Loading: ThreadManager ... 73 ms.
Loading: IpVerificationManager ... 167 ms.
Loading: ClassLoaderManager ... 194 ms.
Loading: ClusterManager ... 2312 ms.
Loading: LockingManager ... 498 ms.
Loading: ConfigurationManager ... 0.000: [GC 0.001: [ParNew: 87040K->3443K(130560K), 0.098
2672 secs] 87040K->3443K(1005056K), 0.0986039 secs]
1.808: [GC 1.808: [ParNew: 90483K->3099K(130560K), 0.0415189 secs] 90483K->3099K(1005056K)
, 0.0418049 secs]
25675 ms.
Loading: LicensingManager ... 214 ms.
Loading: CacheManager ... 2824 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (69 ms).
Service cross started. (48 ms).
Service file started. (91 ms).
Service runtimeinfo started. (36 ms).
Service timeout started. (123 ms).
Service p4 started. (867 ms).
Service classpath_resolver started. (76 ms).
Service log_configurator started. (6296 ms).
Service locking started. (16 ms).
32.249: [GC 32.250: [ParNew: 90139K->13016K(130560K), 0.2134920 secs] 90139K->13016K(10050
56K), 0.2138817 secs]
Service naming started. (1396 ms).
service javamail ================= ERROR =================
service ts ================= ERROR =================
Cannot start service iiop; it has hard reference to service ts which is not started.
Cannot start service licensing; it has hard reference to service ts which is not started
Timed out services:
Service shell > hard reference to interface security.
Service bimmrdeployer > hard reference to interface container.
Service MigrationService > hard reference to interface container.
ServiceManager started for 307650 ms.
Framework started for 344321 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel June 17, 2006 13:05 GMT

Hello David,
Thank you for the hint about IIOP service.
This services starts properly since I fixed the javamail.jar and the transactionext_api.jar files (Services javamail + ts)
Now my concerns are about the timeouts caused by the "interface security" and the
"interface container".
Here is the latest std_server0.out file:
stdout/stderr redirect
node name : server0
pid : 13880
system name : EZ3
system nr. : 43
started at : Thu Mar 1 08:42:09 2007
[Thr 1] MtxInit: -2 0 0
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: error in opening zip file
Loading: LogManager ... 2783 ms.
Loading: PoolManager ... 15 ms.
Loading: ApplicationThreadManager ... 830 ms.
Loading: ThreadManager ... 113 ms.
Loading: IpVerificationManager ... 61 ms.
Loading: ClassLoaderManager ... 67 ms.
Loading: ClusterManager ... 2390 ms.
Loading: LockingManager ... 2547 ms.
Loading: ConfigurationManager ... 0.000: [GC 0.001: [ParNew: 87040K->3248K(130560K), 0.1227555 secs] 87040K->3248K(1005056K), 0.1231219 secs]
1.247: [GC 1.248: [ParNew: 90288K->3105K(130560K), 0.0611352 secs] 90288K->3105K(1005056K), 0.0614666 secs]
23050 ms.
Loading: LicensingManager ... 191 ms.
Loading: CacheManager ... 1932 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (113 ms).
Service memory started. (211 ms).
Service cross started. (241 ms).
Service timeout started. (254 ms).
Service file started. (538 ms).
Service p4 started. (652 ms).
Service classpath_resolver started. (81 ms).
Service log_configurator started. (12581 ms).
Service locking started. (13 ms).
44.117: [GC 44.117: [ParNew: 90145K->13112K(130560K), 0.6812383 secs] 90145K->13112K(1005056K), 0.6816423 secs]
Service naming started. (3984 ms).
Service javamail started. (333 ms).
Service ts started. (375 ms).
Service licensing started. (26 ms).
Service iiop started. (535 ms).
Timed out services:
Service shell > hard reference to interface security.
Service bimmrdeployer > hard reference to interface container.
Service MigrationService > hard reference to interface container.
ServiceManager started for 311713 ms.
Framework started for 346641 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel June 17, 2006 13:05 GMT

Content Aware Move Tool Missing

The Content Aware Tool is missing from the Tools Bar. How do I make it appear

Hi!
You can also cycle the tools with an option/alt+click on their tool icon, in this case the first tool after the first divider of the toolbar.
If you right-click on a tool with an triangle on its bottom right corner, you get a drop down list with the alternate tools.

Installation problem NW2004 SR1 on W2K3 MSSQL2005

Hello everybody,
I am installing the NW2004 SR1 ABAP Stack on W2K3 with MSSQL2005.
During the installation of the database instance Sapinst aborts at the end of the database load with following error:
JS Callback has thrown std::ESAPinstException: ESAPinstException: error text undefined
Can anybody help out or did anybody face the same problem ?
Kind regards,
Torsten

Hello Mike,
Which is the base patch level from which you are trying to upgrade the Engine to SP13?
From the stack trace of the exception it seems that the properties for the JDBC connections were updated but you still have the old driver in the jdbc directory. Can you check if the sqlserver.jar contains the new jdbc classes and that the jdbc settings in the secure store correspond to the driver in jdbc directory?
Kind Regards
Vyara

JSPM error in NW2004s SR1 installation

Hi,
I have just freshly installed NW2004s Application Server SR1. Then I tried to run JSPM to patch it up. When logging onto SDM as the first screen in JSPM, I got the following error:
The execution ended in error.
com.sap.sdt.util.diag.DevelopmentSupportRequiredException: Assertion failed for (Could not parse version string content. For input string: "${SP-Patchlevel}") at com.sap.sdt.util.diag.SDT.check(SDT.java:36).
More information can be found in the log file C:\usr\sap\JAV\JC01\j2ee\JSPM\log\log_20060727155309\JSPM_PROCESS_1_01.LOG.
When I looked at the JSPM_PROCESS_1_01.log, I found the followings at the bottom of the log:
#1.5#C000C0A801650000000000AE0037FB1E000419908952E9A0#1154008476740#/System/Server/Upgrade/Phases/JSPM/JSPMPhases/JSPM_PROCESS##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:796)#Java###Phase status is .#1#aborted#
I've already had my JAVA_HOME and PATH set already, and they both point to the same JDK (which is the only JDK I have in the machine). SDM doesn't seem to have problems as I can logon with the remoteGUI in SDM. Does anyone have any idea what's wrong or what I'm missing?
Thanks,
Marc

Hello Marc,
I ran into the same issue. After a lot of trial and error I eventuelly found out, was the problem was...
I had to do two things to resolve this:
1. Download the XML file containing the SP stack definition:
-You'll find the instructions for downloading this file on the Support Package Stacks Download Page for NW2004s in the box 'Additional information'.
-Put the XML file in the JSPM inbox (Folder '/usr/sap/trans/EPS/in' on a standard installation).
2. Update the SDM:
-Download the file with the description 'SP07 for SAP SOFTW. DELIV. MANAGER 7.00' from the Support Package Stacks Download Page
-SAP Note 860939 explains how to update the SDM
Hope this helps...
Regards,
Bjoern

File Content Conversion-xml.keyfieldName missing

I have datatypes like this
Sender_DT
Material (1...n)
 MATNR
 MTART
 Plant (1...n)
 WERKS
 Description (1...n)
 MAKTX
Receiver_DT
 MATMAS
 MATNR
 MTART
 WERKS
 MAKTX
and the Message Type is Sender_MT
and my flat file looks like this
Matnr Mtart werks Maktx
===================
100 hal 100 bhaskar
200 BAL 200 VIJAY
300 cal 600 bombay
400 dAL 300 VIJAYawada
500 fal 400 bhunes
600 rAL 500 Varanasi
===========================
I want to convert this to xml..where I configured like this....
Content Conversion Parameters
DcoumentName=======Sender_MT
DocumentNameSpace===http://flatfile-xmlfile
RecordsetStructure====Material,,Plant,,Description,*
RecordserSequence===Ascending
Recordsets per message==*
Material.filedNames===Matnr,Mtart
Material.fieldSeparator===<tab>
Material.processFieldNames===fromConfiguration
I am getting error that xml.keyfieldname missing.
Thanks in advance

Hello Vijay,
The error is coming due to the following reason. you have declared multiple Recordset Structure (Material,,Plant,,Descriptio) but have given the information about only one structure(Material). So PI is asking for a key filed name.
Configure as follows.
RecordSet Structure==== Material,star symbol(*),Plant, star symbol,Description, star symbol
RecordSet sequence :Ascending
Material.filedNames===A,B
Material.keyFieldName==A
Material.keyFieldValue==100
Material.fieldSeparator===<tab>
Material.processFieldNames===fromConfiguration
Plant.filedNames===C,D
Plant.keyFieldName==A
Plant.keyFieldValue==200
Plant.fieldSeparator===<tab>
Plant.processFieldNames===fromConfiguration
Description.filedNames===E,F
Description.keyFieldName==A
Description.keyFieldValue==300
Description.fieldSeparator===<tab>
Description.processFieldNames===fromConfiguration
You have to provide information for all of your sub-structures.
Regards,
Madan Agrawal
Edited by: Madan Agrawal on Apr 10, 2009 8:57 AM

New forums jive multi-language support in NW2004s SPS12 missing

Hi,
according to the forums documentation it is possible to edit locale parameters in the adminstration console to change the language for forum users. But changing the language has no effect. Only english language is shown.
I checked the SPS12 deployment file FORUMS12_0-20002293.SCA.It seems that the jive_forums_i18n_xy.properties files are missing.
Does anyone has the same problem on NW2004 or NW2004s?
Regards,
MKM

Hello,
I found the problen, in SAP NW 2004s the jive_forums_i18n_xy.properties files are missing in the deployment file. Hope next SPS13 will have all the files.
As temporary solution files of SAP NW 2004 deployment could be used. In this deployment all files are included. Put them in the jive path on portal server and the languages are shown.
Regards,
MKM
null

OSB - Content length http header missing from business service out message

Hi all,
I am having some diffuclty with a business service in OSB. I created the business service from the wsdl and created a regular proxy service that just routes to the business service. When i run the test console i get the below fault.
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: Length Required</faultstring>
<detail>
After some debugging i find that the content length http header is missing from the outbound message the business process creates and sends to the acutal web service which sends back the http 411 fault.
Does anyone know how to configure the message flow of my proxy service to ensure that the outbound message sent from the business service contains that content length http header or any suggestions on how to fix this issue will be appreciated.
Thanks

Disable the "Use Chunked Streaming Mode" property in HTTP Transport Configuration of your business service. By default it remains enabled.
Regards,
Anuj

Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1

Hi,
I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
We are at BI Cont 7.03, patch 8.
There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
Does anyone have a solution for this?
Thanks!
Kathleen

Hi Kathleen Cooke ,
I am having similar issue now, can you please let me know if you know the solution for the below problem..
I am trying to activate the Business Content for BW Statistics, but the datasource and the Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
I am on
BI_CONT 703, level 0005, Support Package SAPKIBIIP5
SAP_BW 700, level 0012, Support Package SAPKW70012
Thank You,
Varun.

Content in documentation pane missing from Help panel

I am using Flash MX 2004 on my Mac OS X 10.4.5. The content
in the documentation pane (right pane) in the Help panel is
missing. Can somebody help me?

You might have deleted the opera 6.0 directory in
/Applications/Macromedia Flash MX, which it uses to display the
xml-based help content.
If you have a copy of Dreamweaver MX, then copy 'opera 6.0'
from /Applications/Macromedia Dreamweaver MX 2004 to your Flash
Directory. If that doesn't work you may be missing the content from
/Users/Shared/Library/Application Support/Macromedia/Flash MX
2004/en/Configuration/HelpPanel/
and will have to re-install the stuff.

PDK Content on NW2004S SR1 missing

Similar Messages

Maybe you are looking for