PDQ - Create Silent installation for EXE install package
The first question is: Do you have the free version or paid for version of PDQ Deploy? This will make a little difference in your approach for deployment.For the .net part, just download the off line installer for the version you want to deploy. This will be in a .exe form just append the /quite /norestart options to the command line. No need to check if .net is already installed, the installer will just exit if there is nothing to do.For your application, you need to find out if there is a silent install option.For the registry you can just export the registry keys in question with regedit. then in your installer action/script just run the following command regedit.exe /s .regYou can add this all to the install sequence if you have the paid for version or in a .cmd file in the same location as the other install files in your packages...
Hi,
I got EXE file for installation
want to create it a silent installation for deplying it to 100 computers.
needs to check if Dot.Net 4.5 already install and if not install it before installing the EXE
after Installing the EXE need to Activate it using Reg file
how to create all this procces to be installed Silent mode
Thanks.
This topic first appeared in the Spiceworks Community
Similar Messages
-
Integration 10g silent installation will not install WebLogic Workshop
Hello,
I am attempting a silent installation, using wli10gR3_win32.exe. I have created a silent.xml using the information on this page: http://download.oracle.com/docs/cd/E13214_01/wli/docs85/install/silent.html.
I have used that page in the past to successfully create silent installations for versions 8 and 9 of Weblogic, but for version 10g it is not quite working as advertised. I have not found instructions for a silent installation for 10g.
My silent.xml file contains the following line:
<data-value name="COMPONENT_PATHS" value="WebLogic Server|WebLogic Workshop|WebLogic Integration|WebLogic Portal" />
When I run the package with this line, an error is produced in the log file stating that WebLogic Workshop cannot be found.
When I remove the WebLogic Workshop part of the line then Server, Integration, and Portal all install without errors. Unfortunately, Workshop was requested as well.
When I run the installation manually, I am offered Workshop as one of the products.
If somebody can point me to the correct installation documentation or provide the correct syntax for the silent.xml file that would be swell.
thanks.Hi,
I had faced the same issue today, So I had removed workshop and the installation was successful. But the weird thing is after the installation I could see the "workshop" was installed under BEA_HOME.
Did any one face the same issue?
Thanks.
Vijay Bheemineni. -
Creating Runtime Installer for VI with VISA Read VI
Greetings Fellow Users,
Please let me know which 'ADDITIONAL INSTALLERS' the LabView RunTime engine requires in order to run a VI that reads from the built-in serial port (COM 1) of a Windows XP PC. For instance, I include LabView Run-Time engine 8.0.1 to creat an installer for the VI. If I want to load and run this .exe on a PC that has no other NI software, do I need to include any of the following as 'ADDITIONAL INSTALLERS':
->NI-SERIAL 1.8?
->NI-VISA RUNTIME 3.4?
->NI-DAQmx 8.0?
What does the NI-VISA RUNTIME do anyways? Also, when I do include some of these, I have to dig out my LanVIEW installations CDs and they are loaded from teh D:\. What is the cleanest way to load these onto my HDD so that LabView will select these automatically.
Thank you.FLT CTRL 6 wrote:
Greetings Fellow Users,
Please let me know which 'ADDITIONAL INSTALLERS' the LabView
RunTime engine requires in order to run a VI that reads from the
built-in serial port (COM 1) of a Windows XP PC. For instance,
I include LabView Run-Time engine 8.0.1 to creat an installer
for the VI. If I want to load and run this .exe on a PC that has
no other NI software, do I need to include any of the following as
'ADDITIONAL INSTALLERS':
->NI-SERIAL 1.8?
->NI-VISA RUNTIME 3.4?
->NI-DAQmx 8.0?
What does the NI-VISA RUNTIME do anyways? Also, when I do
include some of these, I have to dig out my LanVIEW installations CDs
and they are loaded from teh D:\. What is the cleanest way
to load these onto my HDD so that LabView will select these
automatically.
Thank you.
->NI-SERIAL 1.8?
This is the driver used for serial port controller boards and
interfaces from NI. You do not need that software when trying to access
built in serial ports or ports on interface cards from other
manufactureres than NI.
->NI-VISA RUNTIME 3.4?
This is the software LabVIEW uses to talk to all kinds of IO interfaces
including serial ports. This is what you will need. Runtime means it is
a stripped down version without LabVIEW, C, VB, Delphi and whatever
development bindings and examples etc.
->NI-DAQmx 8.0?
This is the software driver for NI data acquisition devices (analog IO, digital IO, counter , timers).
These are all to be considered drivers and (very maybe apart from
NI-VISA) it is usually not a very good idea to include drivers into the
application installer. If you use them your user is likely to have
bought his own kind of hardware and no matter if he happens to have
bougt the newest SuperPCI interface board with 256 ultra-high-speed
serial ports over wireless connections or an old standard PCI board
with 2 RS-232 interfaces they both will have come with a CD that is
appropriate for that device, whereas the NI-Serial driver you included
is only appropriate for NI serial boards that are still AND already
sold at the moment when that driver was released. The same applies for
any other driver software.
NI_VISA being able to connect to standard built-in serial ports could
be considered different but it isn't really. I have included NI-VISA on
application installers in the past only to find out that the included
NI-VISA version did not run or not run reliably on newer machines with
new OS versions, so we had to point the customer to the NI site to
download the newest version anyhow, or even burn a new CD with updated
NI-VISA versions and express ship it.
Basically including any kind of driver software in the application
installer may seem like a good idea but will usually cause lots of
additional support after some time due to incompatibilities with newer
OS versions, new hardware, etc.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Silent Installation for CS5.5?
I've been able to get silent installation for the DPS tools to work fine for CS6 (v27), but I haven't found a successful method for CS5.5 (v27), aside from using JAMF's Composer to perform a file-system watch.
The commands I've tried:
sudo /Adobe/DPS/r27/cs5.5fp/Install.app/Contents/MacOS/Install --mode=Silent
Starting Installer...
In Silent mode.
Installation successful.
Exiting Installer with Code: 0
sudo /Adobe/DPS/r27/cs5.5fb/Install.app/Contents/MacOS/Install --mode=Silent
Starting Installer...
In Silent mode.
Installation successful.
Exiting Installer with Code: 0
They always report that they run successfully, but don't seem to actually install anything. If I remove the silent flag, the installer will run, successfully, albeit with user interaction, which isn't desirable. Has anyone encountered a similar issue, or have a good way around it?Although I already provided the solution privately I will post it here as well in case other users are facing the same problem.
The correct syntax for silent deployment is:
sudo ./Install --mode=silent --deploymentFile="path"
So for example:
sudo ./Install.app/Contents/MacOS/Install --mode=silent --deploymentFile=deploy/AdobeDigitalPublishing-mul.install.xml
(the assumption here is that the user is in the directory where Install.app is.
From the command line you should see "Installation successful. Exiting Installer with code: 0. -
Silent Installation for OUI Product
I'm trying to do silent installation for Oracle RCU Client by
setup.exe -responseFile "C:\Kapil\Recording\RCU Installer\Disk1\stage\Response\oracle.as.repcu.rcu.rsp" -silent -nowelcome
it starts the Installation in GUI Mode & opens the welcome page
Is anything need to be changed in response file, as i have set ORACLE_HOME="C:\oracle\product\11.1.1\rcuHome_1" and ORACLE_BASE="C:\oracle\product\11.1.1\rcuHome_1"
there are 3 response files present in Stage/Response folder,
oracle.as.repcu.rcu.rsp,
oracle.as.schema.version.Custom.rsp,
oracle.as.upgrade.Complete.rsp
i don't know which one to change ? For testing purpose i have changed & set the ORACLE_HOME & ORACLE_BASE but nothing works out.
Please suggest apart from these values which i have set in response file, anything else do i need to set other values.
Also it's not prerequisite to setup RCU Client in silent mode. Please suggest if some other oracle product (OUI based) can be setup in silent mode. I'm doing for testing purpose to run the silent based installation...
Thanks in advanceHi,
setup.exe -responseFile "C:\Kapil\Recording\RCU Installer\Disk1\stage\Response\oracle.as.repcu.rcu.rsp" -silent -nowelcome
setup.exe -silent -responseFile "C:\Kapil\Recording\RCU Installer\Disk1\stage\Response\oracle.as.repcu.rcu.rsp"
Please check this link
http://www.oracle-base.com/articles/misc/OuiSilentInstallations.php
- Pavan Kumar N -
Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created? I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS). I was wondering if there is any way to create an installer? I think there probably isn't... If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
Thanks so much for your time.I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
How to do silent installation for Adobe CS1 .
how to do silent installation for Adobe CS1
What do you mean by "check" the silent switches? Do you mean you want the documentation for enterprise deployment?
(Worth mentioning just in case: you will need a deployment license from Adobe). -
Create an Adobe 9.3 silent installation for Windows
What are the silent installation switches that I can use for 9.3 so that won't be any user interaction and that the pc won't restart or prompt me to restart? Thanks.
You can find all information in this document http://www.adobe.com/devnet/acrobat/pdfs/deploying_reader9.pdf
P.S. you can download the MSI from here ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/ -
Silent Installation For Crystal Reports Runtime Engine
Hi
I am now using vs2010 and I had created a setup package for my project.
I had added the merged module CRRuntime_13_0_1.msn into the setup project.
After building the setup package, I got the following items:
Project.msi
setup.exe
So, by executing the setup.exe, the program will check all the prerequisite. If those are not existed, the setup program will try to install.
Everything is fine. The program can detect the workstation missing the CR Runtime and installing it accordingly
Now, we want to deploy it to the whole company. We had decided to execute the setup package using a batch file.
So, we want to install the program silently. However, every time we call the setup.exe, it mentioned that we are required to accept the EULA from the SAP. The user is required to click the accept button on the screen and it is no longer a silent installation.
I had tried a number of method to suppress it but no luck. Is there a way to suppress the EULA?
Thank You!Hi Tare,
CR for VS still uses the same installer as CR 2008 uses so see if this PDF for CR 2008 Silent Install works for you.
http://help.sap.com/businessobject/product_guides/cr2008V1/en/xi3-1_cr_install_en.pdf
No Keycode required for CR for VS. And note you do need to change any paths specified or required.
I'll have to ping DEV to see if we support this, won't hear back from them until tomorrow...
Don -
Need help with a Silent Installer for Photoshop Elements 10
I can't seem to get the silent installer working. I've used the Elements 9 instructions for 10 but I still get pop-ups requesting info:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-volume-license-photoshop.html
I cannot find any info at all relating specifically to Elements 10. Before I go digging into the msi with ORCA (preferable to have something I can deploy in Active Directory through GPO) I tought I'd ask here@mtarggart
Delete the blank between /UL and 1033, and it will work. :-)
@Davide M, thanks a lot for your helpful article!
mtarggart wrote:
I've tried the above command and I keep getting prompted to select an Install Language. I'm trying to install this on Windows 7 x64 Enterprise. From an elevated command prompt pointed to the directory of the Elements install files (C:\PSE 10), this is what I am typing: start /wait setup.exe /UL 1033 /V"SERIALNUMBER=xxxx-xxxx-xxxx-xxxx-xxxx".
For the ones who want to use installation from a server share,
change "Setup.exe" by using \\Servername\Share\Setup.exe
and set \\Servername\Share to your Servershare.
The last thing I've been searching for was setting the right country
and stopping PSE from asking me which country I am living in.
Seems as if there was an additional switch e.g. "Country=244" for US. -
Silent installation for FMW products command prompt stuck!!
Hi All,
I am working on silent installation of Oracle FMW components, I am using the response file approach and Oracle Universal Installer. The aim is to integrate these installation commands to continuous integration tools like Jenkins/ControlTier.
When the installation finishes, the current shell still holds the prompt. I need to press ENTER to get out. The problem If I integrate them with this tools their flow does not end up, as command prompt does not return. In addition to that I need the returned execution status (echo $?) for evaluating the process.
I have tried launching it in background but did not work, any ideas ?
They say, silent does not require user interaction still we have to press ENTER to exit the console (silent + GUI).
Please suggest.
Thanks in advance,
Bhaskar
I am posting one of the application installation output to give a better idea(Oracle Webtier Utilities):
=========================================================
bash-3.2$ ./runInstaller -silent -responseFile /sarbackups1/infra_build/response/WebtierSOA_InstallOnly_11.1.1.4.rsp &
[1] 17055
-bash-3.2$ Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 3578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 28991 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-02-21_04-40-33PM. Please wait ..../runInstaller: syntax error at line 299: `count1=$' unexpected
Log: /u01/app/oracle/oraInventory/logs/install2012-02-21_04-40-33PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of 5.9,5.10
Actual Result: 5.10
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for SUNWarc; found Lint Libraries (usr)(SUNWarc). Passed
Checking for SUNWbtool; found CCS tools bundled with SunOS(SUNWbtool). Passed
Checking for SUNWhea; found SunOS Header Files(SUNWhea). Passed
Checking for SUNWlibC; found Sun Workshop Compilers Bundled libC(SUNWlibC). Passed
Checking for SUNWlibm; found Math & Microtasking Library Headers & Lint Files (Usr)(SUNWlibm). Passed
Checking for SUNWlibms; found Math & Microtasking Libraries (Usr)(SUNWlibms). Passed
Checking for SUNWsprot; found Solaris Bundled tools(SUNWsprot). Passed
Checking for SUNWtoo; found Programming Tools(SUNWtoo). Passed
Checking for SUNWi1of; found ISO-8859-1 (Latin-1) Optional Fonts(SUNWi1of). Passed
Checking for SUNWi1cs; found X11 ISO8859-1 Codeset Support(SUNWi1cs). Passed
Checking for SUNWi15cs; found X11 ISO8859-15 Codeset Support(SUNWi15cs). Passed
Checking for SUNWxwfnt; found X Window System platform required fonts(SUNWxwfnt). Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for 127111-02; found 127127-11. Passed
Checking for 137111-04; found 137137-09. Passed
Check complete. The overall result of this check is: Passed
Patches Check: Success.
Expected result: 1024MB
Actual Result: 16384MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (Web_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (Web_PIT3)
[CONFIG]:Create and Start OHS Component (ohs_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Provisioning OHS files for ohs_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Skipping ohs_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start OHS Component (ohs_PIT3)
[CONFIG]:Create and Start Web Cache Component (webcache_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Provisioning WebCache files for webcache_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Copying WebCache files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Customizing webcache.xml
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Skipping webcache_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start Web Cache Component (webcache_PIT3)
Configuration:Web Tier Configuration completed successfully
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD completed successfully.
Prompt holds here I have to press ENTER to come out
=========================================================Hi All,
I am working on silent installation of Oracle FMW components, I am using the response file approach and Oracle Universal Installer. The aim is to integrate these installation commands to continuous integration tools like Jenkins/ControlTier.
When the installation finishes, the current shell still holds the prompt. I need to press ENTER to get out. The problem If I integrate them with this tools their flow does not end up, as command prompt does not return. In addition to that I need the returned execution status (echo $?) for evaluating the process.
I have tried launching it in background but did not work, any ideas ?
They say, silent does not require user interaction still we have to press ENTER to exit the console (silent + GUI).
Please suggest.
Thanks in advance,
Bhaskar
I am posting one of the application installation output to give a better idea(Oracle Webtier Utilities):
=========================================================
bash-3.2$ ./runInstaller -silent -responseFile /sarbackups1/infra_build/response/WebtierSOA_InstallOnly_11.1.1.4.rsp &
[1] 17055
-bash-3.2$ Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 3578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 28991 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-02-21_04-40-33PM. Please wait ..../runInstaller: syntax error at line 299: `count1=$' unexpected
Log: /u01/app/oracle/oraInventory/logs/install2012-02-21_04-40-33PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of 5.9,5.10
Actual Result: 5.10
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for SUNWarc; found Lint Libraries (usr)(SUNWarc). Passed
Checking for SUNWbtool; found CCS tools bundled with SunOS(SUNWbtool). Passed
Checking for SUNWhea; found SunOS Header Files(SUNWhea). Passed
Checking for SUNWlibC; found Sun Workshop Compilers Bundled libC(SUNWlibC). Passed
Checking for SUNWlibm; found Math & Microtasking Library Headers & Lint Files (Usr)(SUNWlibm). Passed
Checking for SUNWlibms; found Math & Microtasking Libraries (Usr)(SUNWlibms). Passed
Checking for SUNWsprot; found Solaris Bundled tools(SUNWsprot). Passed
Checking for SUNWtoo; found Programming Tools(SUNWtoo). Passed
Checking for SUNWi1of; found ISO-8859-1 (Latin-1) Optional Fonts(SUNWi1of). Passed
Checking for SUNWi1cs; found X11 ISO8859-1 Codeset Support(SUNWi1cs). Passed
Checking for SUNWi15cs; found X11 ISO8859-15 Codeset Support(SUNWi15cs). Passed
Checking for SUNWxwfnt; found X Window System platform required fonts(SUNWxwfnt). Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for 127111-02; found 127127-11. Passed
Checking for 137111-04; found 137137-09. Passed
Check complete. The overall result of this check is: Passed
Patches Check: Success.
Expected result: 1024MB
Actual Result: 16384MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (Web_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (Web_PIT3)
[CONFIG]:Create and Start OHS Component (ohs_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Provisioning OHS files for ohs_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Skipping ohs_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start OHS Component (ohs_PIT3)
[CONFIG]:Create and Start Web Cache Component (webcache_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Provisioning WebCache files for webcache_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Copying WebCache files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Customizing webcache.xml
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Skipping webcache_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start Web Cache Component (webcache_PIT3)
Configuration:Web Tier Configuration completed successfully
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD completed successfully.
Prompt holds here I have to press ENTER to come out
========================================================= -
I'm running LabVIEW 6.1 on Win XP Pro, and my application
builds fine, but I can't create an installer.Dependency Walker will show all of the DLLs NIMSIDistKit.dll is dependent on. There is a tree view in the top but the flat list at the bottom will probably be more helpful. It should show the following dlls (at least on a Windows 2000 system):
ADVAPI32.DLL
GDI32.DLL
KERNEL32.DLL
MSI.DLL
NIMSIDISTKIT.DLL
NTDLL.DLL
OLE32.DLL
RPCRT4.DLL
USER32.DLL
If one of these DLLs is missing it will have an error message displayed beside it. I think all of them are regular Windows DLLs so if you are missing one of them your computer might be having other problems. You could try to reinstall LabVIEW to see if it will install a copy of the dll, but you might have to reinstall Internet Explorer or some portion of the OS to get all
of them.
Probably the most important dll is the MSI.dll. If it is missing or too old it might be the problem. I have version 2.0 but I think version 1.1 of this DLL will also work. If you don't have the dll or the right version run \applibs\distkit\redist\InstMsiW.exe (if on Win NT/2000/XP) or InstMsi.exe (95/98/ME). This will install/update MSI (Microsoft Installer) on your machine.
You can also press F9 to toggle showing just the filename and the whole path to the dlls. Besides NIMSIDistKit.dll all of them should be loading from your system folder. If not you may have multiple copies of that DLL and the correct one is not being found. -
Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
LanceHello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under. -
Hi,
I made a LabVIEW project that works perfectly and made an installer for it. I tested the installer on my own computer and everything worked well. The goal for my installer was to put it on multiple computers. So I tried to do this on another computer that has Vista 32-bit and it told me that the installer can only run on 64-bit computers. I tried to choose to install run-time 32bit and it did not change anything, there was still a message to tell me that this installer only can be ran on 64-bit computers. How can I make an installer that works on 32-bit computers?
Thank you.
Solved!
Go to Solution.Langelier wrote:
Will my project work on 32-bit version even if created on 64-bit version?
The code will have to recompile, but yes it should work. I recommend making a backup before proceeding just in case.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How do I create an installer for older versions of LV?
I have applications, for different customers, in different versions of LabVIEW. After installing the latest update to 8.2 it seems it is no longer possible to create an installer with an identical suite of additional installers. I think it should be possible to rebuild an installer with additional installers of your choice, i.e. older versions!
I would like to change only the LV-app and not the rest in order to avoid potential new problems. To be able to create an installer based on a LV-app in 8.0.1. I now need several CD:s from different LV releases. How could that be solved?elinas wrote:
I would like to change only the LV-app and not the rest in order to avoid potential new problems. To be able to create an installer based on a LV-app in 8.0.1. I now need several CD:s from different LV releases. How could that be solved?
Hi Elinas,
I don't totally get what you want but I think I see your problem.
You want to create an installer with LV7.1 (or something), right?
Then when you build it and say add NI-DAQ drivers the installer asks for the LV 8.2 driver disk?
This is expected, because it is not looking at the LabVIEW version but at the NI-DAQ current version and it's origin (LV 8.2 driver disk).
There is no harm here as long as the up-to-date driver on your computer is backwards compatible (check this, the mentioned NI-DAQ and DAQmx removes older cards at every release!)
So it is not asking for the LV-disk but for the driver disk. If you want to install older drivers, you have to seperately download them from the NI-site and install them seperate (or remove the new one and install the old one, but I think you'll get errors)
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Maybe you are looking for
-
How to create a liveworkstation details in sccm 2007
HI how to create query to find the live work station details for last 30 days?
-
How to I convert a Word document to a PDF document?
Please I have checked but did not find good free software tools to convert from word to pdf. Kindly suggest some good tools.
-
How to disable the ethernet media sense on Windows 8.1 ?
Hello, On Windows 8.1 we need to keep the network interface available for applications even with cable unpluged. On XP, there is a working registry key for DHCP (used as a buggy feature?) : HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\P
-
I can't find my firefox print icon? How do I get it back.
while I was trying to print a page the icon went away. I don't know why but I can't get it back. everything that was in the icon is gone. Save, print and so on.
-
How can I edit the information for a CD all at once?
Itunes tells me that if I want to do this I have to select the a CD or track but it does not tell me how to select a CD. I always seem to end up selecting a track. I need to rename albums because Gracenote is so inconsistent or simply wrong