PDS are not displayed in supply chain model SCC07
Hi,
Does anyone know if it is possible to add PDS to supply chain model (transaction SCC07)? currently i don't see this option (we are not using IPPE in the ECC).
Hello,
You can not see PDS in SCC07. Note that PDS are not even part of the menu.
You can also see that the SAP Help does not mention PDS in the documentation of the Supply Chain Engineer (SCC07):
https://help.sap.com/saphelp_scm50/helpdata/en/4c/e1af376ed96c21e10000009b38f8cf/content.htm?frameset=/en/40/f5ae37fdcf3…
Kind Regards,
Mariano
Similar Messages
-
Assign PDS to Supply Chain Model
Hello APO folks:
I have successfully CIFed PDS over to APO (SCM 5.0), and checked it in transaction /SAPAPO/CURTO_SIMU - Display Production Data Structures, Was wondering how do I allocate this PDS (PP/DS type) to my supply chain model in SCE.
Thank you in advance.
MonoHello Mono,
As I know there is no standard way in which you can copy the PDS data from one version to another for simulation in APO.
but, this can be achieved by using transfer of the PDS data to inactive version from R/3. i.e in transaction CURTO_CREATE by specifying the inactive version.
The second way can be by using BAPI_PDSSRVAPS_SAVEMULTI to save a new PDS by specifying the version field with the inactive version.
In this case one can fill the tables using report FUNCTION_LOADER_INLAY or can be filled manually.
for the first case, I do not know why you are facing the message "No Transfer Relevant Data found".
Please check whether you have specified the inactive version name which has been created for simulation in APO.
and also try to create a new production version in R/3 and use this for inactive version transfer.
As you observe Simulation version is unique across the models. and you cannot use the same version name in different models.
hence, only the version field exists in the CURTO_CREATE transaction.
Regards,
Hemanth -
PDS,PPM,supply chain model,production version in R/3
Dear Guys,
can some one help me to find the key difference between
1)PDS,PPM,Supply chain Model and production version in R/3
Thanks
RajOne major difference between PDS & PPM is that PPMs can be edited in APO whereas PDS cannot be modified in APO. Any changes required for PDS needs to be done to the relevant R/3 master data and then CIFed to APO.
Choice PDS v/s PPM?
Functionally both are fine and can be used. However SAP recommends using PDS since it will not support any new enhancements for PPMs going forward. For some reason they want to encourage use of PDS rather than PPMs.
- Srinidhi -
ICamera photos are not displayed in iPhoto
HI!
I have a big problem: Whan I make photos with the included camera in my iPad,
these photos are not displayed in the iPhoto app supplied with my iPad. I can't find
them.
I'm using IOS 5.0.1.
Any help? PLEASE!!!After you snap the photo with the iPad, and that picture shrinks down to the corner, you should ba able to tap that little picture - and it should open in the Camera Roll in the Photos app.
I'm not sure what to suggest other than the basic, first try, troubleshooting steps.
Quit the camera app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Wagetypes are not displaying on Payslip
Experts please throw some light on this..
Wagetypes are not displaying on Payslip. I Copied Standard Form CEDT to my own own form and saved as Variant.
In PE51 I gave my form name as OM01 added wagetypes in Windows and Cumlation IDs I can see Wagetypes in RT Table but I dont see wagetypes in Payslip
What would be cause for that .. Please let me know Its very urgent
Edited by: My SAP Cronies on Jan 5, 2012 4:25 PM
Edited by: My SAP Cronies on Jan 5, 2012 4:26 PMHow can I Map the wage types could you please be more clear on this...
I see my wagetypes 1000, 1001 , 1002 in the table V_512W_D i can also see /001, /002 and other model wagtypes..
please let me knw about this
Please map your wage types that you want to see to evaluation class as 02 in table V_512W_D for that wage type.
Edited by: My SAP Cronies on Jan 5, 2012 8:24 PM -
Some times the logs not display in process chains
Some times the logs not display in process chains then how could we find them??
If you are in Tcode RSPC and opened your process chain you are able to click on the Logs icon. It will prompt you for a date selection.
If this still doesn't work you might have forgotton to activate and schedule your process chain. Before you activate check that your start variant is set to Direct scheduling by double clicking on the start variant.
hope this helps.
Cheers,
Andrew van Schooneveld
(assign points if useful) -
I use hotmail and the problem only happens with certain emails, like Homedepot and Redbox. Within the email, it states "Having trouble viewing this email? Click here.", but when I click this, the same problem persists, no images displayed. These are the only two I have noticed that are not displaying the images. Please help. Thanks
Hello riopeltravel, let's solve this mystery! What make & model phone do you have? Also, have you tried deleting the email account off of the phone and re-adding with the username and password? How long have the email accounts stopped working? Keep us posted!
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Umlauts are not displayed correctly in different programs
Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)Did you check the locale settings on your Windows machine?
-
Chinese characters are not displayed in the Firefox bookmarks
Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
I googled and got some tips:
1) Set your browser to recognise Chinese language internet sites.
Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
- I did this.
2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
Encoding settings can be changed under the "View" option in your browser's menu-bar.
- It was already set to UTF-8.
3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
- This has been done when I installed Windows.
I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla. -
Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?
Hi,
I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
METHODS:
display IMPORTING l_table TYPE string
l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
DATA: gr_table TYPE REF TO cl_salv_table.
DATA: gr_columns TYPE REF TO cl_salv_columns_table,
gr_column TYPE REF TO cl_salv_column_table,
ls_fcat TYPE slis_fieldcat_alv.
DATA: gr_display TYPE REF TO cl_salv_display_settings.
DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
l_field TYPE string.
FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
<ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
ASSIGN (l_table) TO <fs_table>.
ASSIGN (l_fcat) TO <ft_fcat>.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = <fs_table> ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
Add basic default functionality in the ALV report
Functions
l_o_functions = gr_table->get_functions( ).
l_o_functions->set_all( abap_true ).
gr_columns = gr_table->get_columns( ).
gr_columns->set_headers_visible( abap_true ).
Display the list
gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
get_storecodes USING p_stfile
CHANGING it_t001w,
fetching mard data
read_mard_data,
preparing fieldcatalog for Final Data
create_filedcat USING it_t001w
it_site
CHANGING it_fieldcat,
preparing structure & internal table for Final Data
create_final_table_structure USING it_fieldcat,
prepare output data
prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
display_data USING l_table
l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = lt_raw
i_filename = p_p_stfile
TABLES
i_tab_converted_data = p_it_t001w[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
l_index = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = <fs_t001w>-werks
IMPORTING
output = <fs_t001w>-werks.
MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
append site to ranges
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = <fs_t001w>-werks.
APPEND rs_site TO rt_site.
CONTINUE.
ENDIF.
ENDLOOP.
SORT p_it_t001w BY werks.
SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
p_it_site LIKE it_site[]
CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
'MTBEZ' 'CHAR' '25' ,
'MATKL' 'CHAR' '6' ,
'WGBEZ' 'CHAR' '20' ,
'MATNR' 'CHAR' '18' ,
'MAKTX' 'CHAR' '30' ,
l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
'Divsion Description',
'MC Code',
'MC Description',
'Article',
'Article Description',
l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
<fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
CLEAR : l_fieldname, rs_site.
l_fieldname = <fs_site>-werks.
prepare fieldcatalog
PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
create header for excel
PERFORM create_excel_header USING l_fieldname .
CONTINUE.
ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
p_datatype TYPE datatype_d
p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
l_werks LIKE g_werks,
l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
l_index = sy-tabix.
IF l_matnr IS INITIAL.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSEIF l_matnr <> <fs_mard>-matnr.
APPEND <fs_final> TO <ft_final>.
CLEAR l_matnr.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSE.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
ENDIF.
IF l_index = g_lines.
APPEND <fs_final> TO <ft_final>.
ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
<fs_t023t> LIKE LINE OF it_t023t,
<fs_t134t> LIKE LINE OF it_t134t,
<fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-mtart.
ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-matkl.
READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_makt>-maktx.
ENDIF.
READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t023t>-wgbez.
ENDIF.
READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t134t>-mtbez.
ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
text
FORM display_data USING p_l_table
p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
l_fcat = p_l_fcat ).
ENDFORM. " display_dataI don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
call method set_colname
EXPORTING iv_tab = alv_tab
iv_colid = 'xxxx' "fieldname from the table
iv_stxt = text-t54
iv_mtxt = text-t55
iv_ltxt = text-t55.
METHOD set_colname .
data:
alv_cols type REF TO cl_salv_columns_table,
alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
IF iv_stxt <> ''.
CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
ENDIF.
IF iv_mtxt <> ''.
CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
ENDIF.
IF iv_ltxt <> ''.
CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
ENDIF.
CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname -
Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01 = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_header
i_structure_name = 'ZVEND_HEADER'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_item
i_structure_name = 'ZVEND_ITEMS'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "build_fieldcatalogHi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
is_layout = wa_layout
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = I_SORT
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = i_event
IT_EVENT_EXIT =
i_tabname_header = 'i_ekpo' <----
Pass here header table name
i_tabname_item = 'i_eket' <----
pass here item table name
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = i_ekpo -<<----
Pass here header internal table
t_outtab_item = i_eket <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun -
Excise duty rates are not displayed in J1IEX
Dear friends,
Excise duty rates (BED, ECS, SECESS) are not displayed in item level in excise invoice J1IEX, But excise values are updated correctly. I have maintained duty rates in J1ID. Kindly give your valuable inputs.
Thanks and Regards
ETR.Hi Maladri,
Thanks for your reply.
I have maintained my condition types BED, ECS, SEcess in respective fieslds of BED Condition, ECS condition, SEcess condition already, eventhough the % not updated in J1IEX Excise invoices.
But it has updated 10 days before all values came properly in J1IEX.
Can you explain which condition type we have to maintain in BED %, ECS%, SEcess % in Maintain excise defaults, I didnt maintain any condition types there. If it is the reason then how it updated correctly 10 days before?
Kindly guide me
Thanks and Regards
ETR -
I have restored my new replacement iPhone from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying I don't have any pictures in my camera roll, it has all the spaces for them, but it just shows empty white squares? How do I get my pictures back? Thanks!
It's difficult to say whether it's stuck or not as the time to restore a backup can depend on many factors. You'll have to decide when you think it's just not continuing. You could try turning the phone off (hold the power button until you see the red off slider, then slide to turn off), then back on to see if that would get it going again.
When you're convinced it's just hung, you can go back to settings and tap Stop Restoring iPhone to stop the restore. You'll then have to try restoring it again (Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens and when given the option, choose Restore from iCloud Backup). Be sure it's connected to your charger and wifi while it's restoring the backup.
You might also try the approach posted here by ezjules: https://discussions.apple.com/message/19518589#19518589. This seems to have worked for some people who had trouble restoring their photos from an iCloud backup. -
Search for member activities - points are not displayed correctly
Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
AnneSometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt -
Entity Descriptions are not displayed correctly in Combo box dropdown list
In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha
Maybe you are looking for
-
JAI runs out of heap when resizing big images, Java2D not
Hello, I was doing some tests wit PMIW library (which wraps both Java2D and JAI) and it seems Java2D is much faster and doesnt eats as much memory as JAI (I have tested the native version only). Do you have a clue why? Thanks
-
When I have resized and saved an image in Photoshop (CS, version 8.0 for Mac) using image size, why is it so large when I open it in preview or another image viewer? Has it actually saved according to the size I specified?
-
i need help
-
Quicktime Pro crashes when I try to save movies
I just bought a new macbook pro yesterday. Upgraded from Quicktime 7 with registration key to QTPro for sole purposes of converting my flip camcorder files from AVI to something recognizable in IMOVIE '08 (apple doesn't seem to support AVI???). I am
-
I made several movies using symbols and motion twens and now wish to save these as an flv to play in a web browser. Could someone please respond with an easy solution as I am just learning about this. Thankyou.