PDWordFinder does not extract text in order

Hi,
My word document had few comments.
I converted the word document to PDF by File->SaveAs->Adobe PDF.
I did not convert the comments to sticky notes. Hence they appear the same as in word document.
My application uses PDWordFinder API to extract text from the document.
I notice that the text in these comments is retrived only at the last.
Why the text in the comments (not sticky notes) is retrieved at last and not in the order they appear in the document?
Is there any option to make the wordfinder retrieve text in the order of appearance?

I need to extract text in 'reading' order, but it's not very clear how to use PDWordFinderAcquireWordList parameters.
Can I use different 'reading order' for PDDocCreateWordFinderUCS method, or can I use xySortTable?
Which are sorting parameters (if they exist) for AcquireWordList or WordFinder ? Thanks

Similar Messages

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Operation does not fetch in process order

hi PP-Pi gru,
when i am creating process order from planed order , operation ( master recipe) does not fetch in process order..only take default operation 10, kindly suggest me how all operation will fetch in process order
another mater is when assign production profile in t- code CORU show the error massage " production scheduling profile for plant ALIV,order type does not exist"...but we have used stander order type PI01..kindly suggest me
Rogers
Aqueel

Hi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
You need to define production scheduling profile for your plant in OPKP which is assign to order type dependent parameter COR4 In planning screen. Please check. Also check the work scheduling view of material master.
Regards,
R.Brahmankar

Why does not the text "Powered by Adobe Forms Central" fästän man has paid form

Why does not the text "Powered by Adobe Forms Central" fästän man has paid form
[email protected]

These forms are not embedded correctly. I'm surprised they even work. You need to go to the distribute tab, click Embed button, copy the embed code provided and then paste that into your HTML. This FAQ explains in more detail and some of the issues you may encounter while embedding: http://forums.adobe.com/docs/DOC-1991
Randy

Archieve does not exist for purchase order

Hello Gururs,
When i tried to change the delivery date for the PO and when i trying to save the PO
then it throws the error messages-'Archieve does not exist for purchase order'.
PO was created in feb.
Please help me how can i solve this issue.
BR
Ashish

Can you give a more detailed information.
What transaction you actually use, what you enter step by step until you get to the error: 'Archieve does not exist for purchase order'
This message sounds like you want change a PO which is already archived.
A change to an archived PO is not really logical, as you can only archive closed business cases. and if the business case is closed, then why would you change the delivery date.
A PO from February should not really be archived already in June. I never saw it in practice, as you could not do any anual reporting
I would assume further that SAP found the entered PO number in the archive index but did not find the way to the archive itself. This can happen if the archive file was deleted or moved manually.
I am not sure if the next messae has really anything to do with your purchase order, thats why I ask you to post the exact steps until the messages come up:
Le fichier archieve 000524-002SD_COND n'existe pas is the message discription
But even this message explains more or less the same, that the physical archive is no longer in the same place where it is expected to be found according to the info in records of table ADMI_FILES.

Album uploaded to my Photoshop web site does not appear in album order

Album uploaded to my Photoshop web site does not appear in album order, although after it is configured
through the sharing function, it is in the correct order.

Do matters improve if you update to iPhoto 9.4.1?
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums

0CRM_OPPT_H always does not extract field BWSTONESYS4

Hi,
The extractor 0CRM_OPPT_H always does not extract field BWSTONESYS4 BW status. However by transaction CRMD_BUS2000111 I visualize the status E0003 Won.
Can you help me?
Versions:
CRM 5.0
BW 7.0
PS: Sorry about my English. I speak Italian and French

Hi All,
I am facing the same problem..
standard 0CRM_OPPT_H dose not contain the 'STATUS' field, e.g. E0001
I found that maybe we can find that field by join the following three tables and the oppt guid.
                CRM_JEST
     CRM_JSTO
     TJ30T
but it is too suffering....
anyone can help?

My iphone four screen does not work and in order to restore it i have to turn of the "find my iphone" app. help!!!

my iphone4 screen does not work and in order to restore it i have to turn of the "find my iphone" app. help!!!

It is not the app, it is Find My iPhone enabled with your iCloud account settings on the iPhone.
http://support.apple.com/kb/ph2702

Iphone4 does not send texts/imessage properly.

I've had this iphone for 18 months and it does not send texts/imessages properly. The iphone will be sending texts completely fine and it will have good 3G connection but then out of nowhere the phone will take over 20 minutes to send texts/imessages. Phone connection is out of the question. it does this on and off very frequently. It started doing it very rarely but its been doing it more and more often.
More info:
My service provider is Verizon wireless

Hey Danny,
If you are having issues with Messages being sent, I found a troubleshooting article that will assist with resolving it for you.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

Web Start does not extract native library

Hi there,
we�ve been deploying our application through web start for about a year, yet. And we are in the "lucky" situation, that all customers are running windows and indentical JREs.
A few weeks ago we switched from 1.4.2_08 to 1.5.0_03. Our customers (pre-)install our application by using the -import option of web start, which downloads fine. But recently, we receive more and more error reports, that a call to a native library fails, when the application is first run.
Thus we inspected the users' web start cache and found out, that though the jar containing our native lib was downloaded into the cache, but the contained dll is not extracted.
The extracted dll usually resides in a directory RM*.jar in the cache. And of course, as it isn't there, the call to the library fails.
But the question is, why web start does not extract the dll in some cases? Unfortunately we were not able to reproduce this situation locally, so we're limited to our customers' reports.
Btw. the dll is in the jar's root directory and the jar itself (as well as all other application jars) is signed.
Any suggestions?
Clearing the cache and donwloading again solves the problem, but might not be suitable for users that repeatedly need to download 10 megs with an isdn dial-up connection... :-/
Thanks in advance!
tdecem

To try to reproduce the original problem, remove the deployment.properties file from the <application data>\Sun\Java|Deployment directory, then run 1.4.2 with you app. The upgrade to 1.5.0.
The cache will only be upgraded if deployment.properties file indicates that it has never been run with 1.5.0, so if you have had 1.5.0 insalled on a system, and then you remove it, the cache may never be upgraded unles the deployment.property file is removed and then used with 1.4.2.

NSString sizeWithFont:constrainedToSize:lineBreakMode: does not wrap text

For iPhone SDK Beta 8, NSString sizeWithFont:constrainedToSize:lineBreakMode: does not wrap text of receiver, despite the fact that the documentation says it should.
CGSize constrainedSize = { MIDDLECOLUMNWIDTH, 1024 };
CGSize labelSize = [text_ sizeWithFont:font_ constrainedToSize:constrainedSize lineBreakMode:UILineBreakModeWordWrap];
Does anyone know an alternate way to automatically wrap a string's text given a constrained size?
Message was edited by: Dave Bowman
Message was edited by: Dave Bowman

I think you should re-read the documentation
*Returns the size of the string +if it were rendered with the specified constraints+.*
Discussion
This method wraps the receiver’s text and truncates it, as needed, to fit the specified size. *It then returns the actual size of the resulting text*. If the height specified in the size parameter is less than a single line of text, this method may return a height value that is bigger than the one specified.
*This method does not actually draw the string.* You can use it to obtain the layout metrics you need to draw the receiver in your user interface.

Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

Safari does not display text on some sites.

I am running OSX 10.10.2 and Safari 8.03
Some sites I visit do not display text at all.
For example: This site (http://neflin.org/) looks fine in Chrome, Firefox, whatever. But in Safari, it has no text at all. See below.
Mail is having difficult with some text in html email too.
I have rebooted, reset the PRAM, deleted preferences and turned off extensions. I checked the Guest account and created a new account and in all cases the problem persists.
I have validated fonts in Font Book, restored standard fonts and looked for duplicates. Nothing.
Flash and Java are up to date.
Any thoughts?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

PDWordFinder does not extract text in order

Similar Messages

Maybe you are looking for