PE 10 - DVD Menu is very "aliased" or blurry?

So, the smaller you go with this, the better it looks. Here is the image, but I have uploaded a full-size image to flickr to show the true blurriness. This is a screenshot of the burned DVD, not the PE10 project: http://farm7.static.flickr.com/6229/6324864256_d03f059813_b.jpg
Is this because I chose widescreen DVD output? or maybe because I used a large picture for the background? Should I try a different font? what gives?
I noticed the aliasing when I was designing the menu - it was there when I previewed no matter what. I just figured it was downsampling to use less memory or something but that it would render in full-quality. It obviously didn't - anyone have any ideas? I am just getting to know the program and figured I would try slapping together a DVD for my brother-in-law's wedding from last year.

Ted,
You are correct. Way back when, DVD looked fabulous, compared to VHS, or Beta. That was then, and this is now. Then, TV's were all CRT, and with pretty low rez. Now, most are HD with resolutions that were not even thought of, when DVD was introduced. Nowadays, DVD looks pretty bleak, compared to BD, though I have to say that modern players w/ up-rezzing chips, do an astounding job of making DVD's look better than ever - but still far short of BD.
For Titles and Menu Text in DVD, there are some useful links in this ARTICLE. One of the best discussions on Text in the DV format, is no longer available - the server is gone. Wish that I had made a copy of that, as it went into so much useful detail.
Good luck,
Hunt

Similar Messages

Adobe Photoshop Elements 10 DVD Menu

I read somewhere that I could make a DVD menu, in Adobe Elements for Adobe Premire Elements 10, but I am having troubling figuring out how to do so. Dose anyone know if there is a written or video tutorial for making a dvd template in Adobe Photoshop Elements 10? As that would really help me out, and I'd really appreciate it. Thanks in advance.

The Menu Sets in PrE are very involved, as PrE does a lot of semi-automatic authoring, so things have to be done a very specific way. This ARTICLE links to a thread in the Photoshop Forum, where I discuss the naming conventions, etc..
When on is working with PrE Menu Sets, I have several recommendations:
Only start with, and Save Copies of the Menu Sets.
Keep one of the Menu Set Templates handy, as a reference.
Remember that Photoshop can both create and edit Layer Sets (the structure of Buttons), while PSElements can only edit them, and not create them, unless something was changed with PSE 10.
Sub-picture Highlights (the Button "activation" part), can only be 2-bit, and cannot have any FX.
The Layer, and the PSD naming conventions are extremely important. Those special characters are what make the Menu Set work.
When done, Save into a new folder, withing the DVD Template folder hierarchy, and also do the PNG files, just like the DVD Templates have, so you can see them in PrE.
Good luck,
Hunt
PS - I think that Steve Grisetti covers a lot of this in his PrE and PSE book.

DVD menu title selection on DVD player with DVD's burn from iDVD

Regarding DVDs burned with iDVD 6.0.3, I have burned multiple DVDs with 6 buttons on the main menu page each of which links to a short film. On the menu screen when I push the right arrow button on the DVD remote not all the menu buttons light up. In addition to pushing the right arrow button on the remote, I have to push the up or down arrow button on the remote (to the DVD player hooked up to the TV) to get to some of the buttons in my DVD menu to be selectable. The buttons are arranged by me in a grid sort of pattern. Is there a way in iDVD I can get all the buttons to be selectable using only the right or left arrow keys on the DVD player remote? Do you understand what I am asking?
Message was edited by: powerbookaid

Hi powerbookaid
And welcome to apple discussions. It's actually difficult to find standalone versions on ebay and CL / Apple's FCP and DVDSP. I found them myself but it took me a very long time. Not always something you can do overnight. But if you are very patient something will show up eventually.
If you need something now that works (although I advise caution as in backup your dvd or video_TS first) then consider this app for much less money (donationware):
http://www.mydvdedit.com/index.php?lang=english
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

DVD menu in Adobe Premiere

Any one know how to make DVD menu in Adobe Premiere? Only a simple DVD menu is enought. Really appriciate your help. Thanks

I used the CS2 quick DVD for review projects. But it is easy to accomplish this in CS3 and even easier in CS4 and CS5 (where you have dynamic link to Encore).
From Premiere CS4 with your desired sequence active, pick Fiile -> Adobe Dynamic Link -> Send to Encore.
This will open that sequence as a timeline in Encore and will make it first play. The simplest version is to set the end action of the timeline to "stop," set the transcode (probably the default) to automatic, and it will create a DVD with no menu that plays your movie.
If you want to add a simple menu, take a main (not a submenu) from the library and double click it. Remove all but one of the buttons. Link the button to your timeline, right click on the menu and make it "first play," and make the end action of your timeline "return to last menu."
Yes, it can become complicated very quickly, but simple menus should not be too difficult.

PE3 DVD Menu Background video quality

Hi,
I'm creating a video for DVD and have got a 15 second AVI file I am using for the DVD menu background.
I've added it in the Create DVD section and it all works fine. However, when I view the created DVD the quality of the menu video is horrible. Lots of compression artifacts.
When I look at the VIDEO_TS folder the VOB file for the menu is about 6Mb.
If I create a movie using the same 15 second AVI as the main movie (and no DVD title) then the SAME 15 second AVI becomes a 15Mb VOB file and looks much better.
a) Why is PE3 using such low quality when compressing video files to use as DVD menu backgrounds?
b) Is it possible to override it and make it use the same quality it uses for the main movie?
Many thanks,
Chris
PS I'm using Premiere Elements 3.02 on Windows XP.

Hi Steve,
The 15 second DVD menu background AVI was created in Premiere Elements in a separate project. I created some Titles with Motion paths, layered them and then added some music.
I then used File->Export->Movie... to save it as a Microsoft DV AVI which I then imported into the main movie project.
I then selected Create DVD and dragged the movie into the Menu Background place.
The project seems to work fine. The only issue is that the generated VOB for the menu is only 6Mb and very poor quality whereas if I create a DVD from the separate project where I created the 15 second title movie the same movie clip becomes a 15Mb clip (and hence 2-3x the visual quality too).
Note that the rest of the movie is fine. It's just the menu background that appears to have been badly compressed.
Chris

IDVD 7 and leader film before DVD menu

Dear readers and helpers
I try to produce a DVD with iDVD, which until this stage does it well.
Now, as with professional DVD's, I would like to see a leader/entry film before the DVD menu is showing up.
Does anyone know how I could achieve this with iDVD or maybe with Final Cut Pro X?
Thank you for anyones help and suggestions.
Regards from Switzerland
Thomas Thaler

Hi Thomas,
I am not sure what "leader films" are but if you a referring to something like a preview before the motion menus you can accomplish this.
Open DVD map and you'll see boxes. Basically drag your movie file on the very first box.
Basically after you disc is burned, that movie in the first box will play and then the motion menus.
I hope I addressed your question correctly.
Calbe

DvD Menu Templates

Hi. Just wondering why Premiere Elements 11.0 did not include DvD Menu Templates. Instead, after you choose one, they ask you to download it from the web. Does anyone have a link for these menus? All my work computers are not on line for internet connection and all of them have elements 11.0. Thanks.

orlandoVideography
Please check out my blog post on Premiere Elements 11 Content
http://atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
Your download choices from within the program are for the particular Content choice or ALL. But, the wait for one can be very long, although some claim they can accomplish that task in seconds. So, the wait for ALL can seem endless. There is an option for having the download take place in the background if that is any help.
Patience is a good part of the answer.
ATR

Please, how make a DVD menu with chapters? FCPX

I already instaled FCPX but I can't find where I can make a profesional DVD menu as in DVD studio before. There is only "share" and this is for amaters not for me. I need make profesional DVD with chapters, caregories etc.
Please is there anybody who know how or where make it ?
Thanks very much to all.

Export a movie from FCP X. Import the resulting movie into FCP 7 or older version of FCP. Add chapter markers as needed, then export to Compressor and on to DVD Studio Pro for authoring and burning. Hopefully you didn't delete the old pro apps before installing FCP X.
If you're waiting for Apple to add a full featured DVD app, don't hold your breath. Apple has declared that the DVD-Video format is dead and apparently they think no one should be using it.
-DH

Create a DVD menu to play only selected scenes?

Hi,
I'm using Premiere Elements 11. Is it possible to create a DVD menu for automatic play of selected scenes? As an example, my movie may have 12 scenes. However, I would like to give the user the capability to play scenes 2, 4, 6, & 12, without interruption (or the need to go back to the menu).
Thanks,
Dean

ATR,
I also think that your workaround can work for this instance, unless I mis-read the requirements.
As for Encore, as of EncoreDVD 2.0 (CS 2 Production Studio in my case), Encore CS 5, CS 5.5 and CS 6 (the end of the line for Encore), it can do that easily.
Now, I am only guessing with Sony's DVD Architect, but would hope that it can do the same. Maybe Steve Grisetti can comment, since he "wrote the book" on that program.
As we all know, PrE has many authoring limitations. First, they are semi-automatic, and very linear. That said, for most users, it works just fine. However, there are many, fairly common navigation schemes, that just do not directly figure into what it can do.
The downside to a full-featured authoring program, is that that "semi-automatic" work will not be done - one must do things by hand, but with that extra work, comes vast power. To me, that is a small trade-off. I will go for "power" any day. Of course, as I normally use Encore, I am used to doing much by hand, so it's just part of my authoring scheme.
I wish that I knew Sony's DVD Architect better, but I have used Encore for so long, that I have never found a need to even look at it. All that I know has come from here, or Muvipix, where it always gets great recs. Since Encore is no longer part of Adobe, I have the choice to either stick with my versions, or look to another authoring program. Over the years, I have used Encore, Sonic Scenarist (never owned it myself, but authored on other's systems, since it cost about US $50K), and DVD Studio (good, but with a clunky interface). Encore was my go-to app., but then, it will be no more.
Hunt

Creating a DVD menu, how do I compress videos?

I'm going to be creating a DVD menu on DVD studio pro for an assignment, but I don't know how to use Compressor. I was wondering if anyone can help me on how to compress videos (main menu, chapter selection menu, transition, etc) on Compressor before importing them to DVD studio pro? What format do I compress videos into (mpeg 2, mpeg 4. etc)?
Thanks.

Essentiallly: Create your menu in DVDSP. Bring your movie into Compressor as the source file. Select one of the DVD presets (90 minutes best quality is good). Submit for encodimg and then bring the output files into DVDSP.
Clearly, you need to know the fundamentals to do much of this…and learning those from these forums is not very practical The Apple Pro user manuals are very well done. Get acquaninted with them amd you'll be glad you did.
Good lluck.
Russ

Dvd menu problem

The dvd menus does not accept custom background images. I can place images in the dvd menu, but when the dvd is rendered all images are gone.
What is wrong with this software? This problem has been written by others, but it seems to be no solution to it.
My images are 720 * 576 pixels jpg.
I will be very happy if someone could give me a clue...

There were several Menu Sets in PrE 9, that did not work properly, when adding a custom background image. One valued contributor, A T Romano, did a full test, and listed each "problem" Menu Set. His report is in a thread, similar to yours on the Menu Sets.
It appears that Adobe corrected those Menu Sets in PrE 10, or at least I have not read of the issue with the latest version. I never did find out why some of those Library Menu Sets (they are just PSD's after all), did not work. It also seems that ATR found a workaround for those, but I cannot recall the details now. This is one of those THREADS, with ATR's comments, and there are several others too.
Good luck,
Hunt

I would like to create chapters within my footage for Scene selection on the DVD menu

I have edited footage using FCPX and exported it to allow me to use it in IDVD. I now would like to set chapter markers so that the DVD menues allow for scene selection. I believe that I may have to do this in FCPX before exporting it
Can you tell me how to do it.
Thank you

This is one of the most embarrassing omissions in FCP X. There is no proper facility to add chapter markers and export them with your movie.
The way I get around it is to make each chapter a separate project in its own right. I then export each of the chapters and when I bring them into my DVD Authoring application, it's a synch to add the chapter markers (between each file on the timeline) with precision.
As you've already created your project (presumably in one hit) create a new project for each chapter then copy and paste the relevant clips into each 'chapter' project, then export.
Alternatively, you can add chapter markers from within the preview window in Compressor if you have it - but it's quite fiddley and not very precise.
Andy

Is there a 'Play All' option for DVD menu?

Hi,
I was hoping someone can possibly help here... I have created a DVD menu in iDVD with 8 separate movie items each with their own button (with underlined feature), but with no sub menus or additional pages.
Incidentally, these items are home movies, transfered from old Hi8 tapes, edited in iMovie then added to iDVD.
The 8 items have all successfully loaded to the iDVD menu and will play when each item is selected (in test mode).
However, I was hoping to also add a 'Play All' button so that the whole DVD content can be played as one continuous piece if required, rather than being limited to being able to play only individual items at a time and then having to return to the menu page in order to select the next item.
Please can anyone offer any help here? I'm very new to Macs/iDVD etc so simple, basic guidance would be much appreciated!!!
Many thanks,
Robin-UK

Hi Robin
Welcome to apple discussions. I use Toast (personal choice only) in this situation since it has a play all check box. But then you don't get the fancy menus.
Click Here
There is no such check box within iDvd for selecting play all but you can set up iDvd's preferences to address scene selection menus when a movie/s is added. And here's how you do that:
A second option might involve adding the 8 separate movies to the slideshow feature within iDvd for continuous play. And yes you can add photos as well as movies to idvd's slideshow feature with a number of added benefits which I won't go into here. But if you want more info on this procedure just look at a few of Old Toad's prior posts / replies on this iDvd forum.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Dvd Menu Adobe Premiere Elements 10 for Mac with bad resolution

Hi, I use a MacBookPro with Mac OS X 10.6.8 - Intel Core i5 2,4 GH - RAM 4 GB.
I just purchased PRE 10 version hoping to solve a problem I had with version 9 for Mac but not with a version 7 for Win.
I
My problem is that when I burn the dvd with the final work in PAL system, the menu of the DVD has the text very blurred at a very bad resolution.
I searched this forum and I didn't found a similar problem for Mac user.
I had the same problem with PRE 9.
Same problem if I insert a logo in the corner of the video. Very bad resolution image in the final dvd.
I tried to change the beginning resolution of the image from very low to very high and the result was the same.
Someone has similar problems? Someone did find a way to solve it?

Dear Bill, many thanks for your answer.
This is the Project Preset chosen.
As the source is a JVC Everio with hard disk, I chose PAL - Hard Disk - Widescreen 48 KHz
The source is as I said a JVC Everio in SD size. I saved the files in a backup Hard Disk. They are .mod files.
I don't know how to see if a Menu Sets is HD or SD. I tried almost all the available Menu Sets always with the same blurry results.
These images explain better than words.
Note that the firt image in the DVD Menu is perfect, not blurry. And this add a little bit of mystery :-)
this is the scene selection that has text blurry
And this is the logo I put in the right bottom side of the video. It is blurry. I put a high resolution image and it was blurry. Then I tried with an image .png with the same width of the video (720 pixels) and this is the same blurry effect:
The solution I use in these days to have goog results is very time expensive.
I make the editing work in my mac, without logo and menu. I make a dvd. Then I import the VIDEO_TS folder in my old pc, with my old version of Adobe Premiere 7.0. I insert the logo, I make the menu and then I make a dvd with my old PC and the resolution is the one I want.
Obviolusly I'd like to do all the work in my Mac...
The same problems and solution I used also with PRE 9.0
By the way, I'm using Adobe Premiere Elements in my Mac instead iMovie because I need to do videos longer than 2 hours. And iMovie has this limit.
Many thanks in advance for help. There is someone that is using Mac and PRE 10 with GOOD results?

Adobe Photoshop Elements 11 to create custom DVD Menu

Hi,
I know that starting from EL 11 it is possible through Photoshop EL 11 to create custom DVD Menu starting from scratch.
I fail finding on the Internet proper documentation for both creating it on Photoshop EL 11 and importing/using it on Premeiere EL 11.
I sometimes wish to create a Web DVD to put on the Internet and all I need is a nice background picture and a Play button.
how to do so? Where can I get detailed documentation and vidoes?
Thank you

The only problem that you might have, other than getting all of the naming and structural aspects correct (very specific), would be with the creation of Layer Sets in PSE. I am not sure if they have been added to PSE, and they are necessary for creating the Buttons. As I use Photoshop, and do not own PSE, I cannot tell you whether Layer Sets have been added.
This discussion, in the Photoshop Forum, goes into more detail on creating Menu Sets for PrE, in Photoshop: http://forums.adobe.com/message/2490846#2490846
I strongly recommend that one spend some time with one of the PrE Template Menu Sets, studying every aspect of what is reqired. Even though I create Menus (for Encore), and Menu Sets for PrE, I still will use one of those Templates as a "guide."
Now, if PSE does not yet have Layer Sets, one can still find an existing Template Menu Set, that comes close to what they wish to do, and heavily modify that in PSE.
One thing that trips up many DVD Menu designers, when they start out, is that NO Button may overlap any other Button, even by 1 pixel.
Good luck,
Hunt
PS - if PSE has added Layer Set creation (it has been able to edit, just not create them, for many versions now), please post that information, as it will help me, in helping others.

PE 10 - DVD Menu is very "aliased" or blurry?

Similar Messages

Maybe you are looking for