PE 10 running on Mac OS 10.6.8 Thumbnail issue

I have 4GB RAM and lots of hard drive room. Why can't I see a thumbnail view of my video clip in the organizer. All I see is a thumbnail view with an Hour-glass. I need to double click the hour-glass then click play to see the clip. The video clips were taken with a Sanyo Xacti HD. In the Premiere Elements Editor the best settings it: NTSC-AVCHD-AVCHD LITE 720p30.
I use to do all my editing in iMovie and thumbnail clip generation was not an issue.
I don't have this issue with my Windows 7 laptop, different operating system.
Could this be a Mac/Adobe issue only?
Thanks for any help and suggestions.

  Shooting MPEG4 - AVC/H.264 should not be a problem, notably because it’s supported by Apple’s Quick Time. You may have a missing codec on the Mac.
The video forum may be able to offer better Advice. Give it a try:
http://forums.adobe.com/community/premiere_elements

Similar Messages

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • I have installed Smile Box and can't get it to install, I am running a Mac Powerbook G4 10.5.8 1.33 GHz help?

    I am running a Mac Powerbook G4 OSX 10.5.8 1.33 GHz  and can't get Smiebox to install, it downloads the program just fine but will not let me install it, can someone tell me why?

    Hi SusieQ,
    Seems they have no idea what they're doing over there, to wit...
    Mac Snow Leopard and above*
    In general, we recommend a multi-core processor and at least 2 GB RAM.
    Connection to the Internet is required; Smilebox is optimized for a high-speed broadband connection, and that faster connection will give you the best performance.
    Smilebox uses your Internet browser and Flash11 (or higher) to run. We automatically detect whether Flash is installed and will help you install the free download if need be. You will also need javascript enabled. Your internet browser and any security software (firewall, antivirus) you have on your computer may need to be configured to "allow" Smilebox internet access. Please refer our article on - I have security software (firewall or anti-virus software) that I suspect is blocking Smilebox.  What can I do to fix that?
    If your computer shipped with Windows XP, Windows Vista, Windows 7 and Windows 8 you can install run Smilebox; we do require that Windows XP computers have Service Pack 3 installed.
    To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher (if your Mac was made in the past 3 years, it should meet this requirement), 2GB or more RAM.
    *Smilebox will not run on earlier versions of the Mac OS X including Leopard (10.5).
    Snow Leopard is 10.6.x, no G3/G4/G5 PPC Mac can run 10.6 or above.
    So this line is wrong, or two other lines about Snow Leopard are wrong....
    To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher
    https://smilebox.zendesk.com/entries/23872226-What-are-the-system-requirements-t o-run-Smilebox-

  • I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

    Set up iCloud
    Set up iCloud (2)

  • I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

    I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
    Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
    Years ago there was a program called mail switcher which added this functionality, but thats gone.
    cheers
    Tom

    They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
    Not a great solution.
    Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

  • Why can I no longer open images with Photoshop CS3, running on Mac OS 10.4.11?

    Why can I no longer open images with Photoshop CS3, running on Mac OS 10.4.11?

    You may be able to drag and drop the icons from one toolbar onto another, you can then hide the toolbar that you no longer need. For details on how to do that see https://support.mozilla.com/kb/How+to+customize+the+toolbar

  • The latest Firefox won't run with Mac OS 10.4.11. How can I get the previous version of Firefox?

    I have Firefox 12.0. It won't run with Mac OS 10.4.11. I do not want to have to buy a new computer right now. I would like to go back to a previous version of Firefox that will run with my operating system. How can I download an older version of Firefox?

    You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
    *ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/

  • It will not run on Mac OSX 10.5.8, on a G% dual 2.0ghz, now my older version of Firefox is gone...

    I downloaded Firefox 4.0 and It will not run on Mac OSX 10.5.8, on a Mac G5 dual 2.0ghz. Now my older version of Firefox is gone...Why won't it work, the download page says it is for OSX and does not say it will not work on any particular OSX. Can your clarify. And can I get the old Firefox 3 back or should I continue using Safari....?

    Yes I've read every one of them, none of them provide solutions whatsoever, I have spent about ten hours on this site in the past two days to no avail, none of the "resolved" threads provided any sort of solution for me, I have tried everything suggested on this website so far, multiple times, to no avail.

  • I am running a MAC Yosimite 10.10.1 (latest) and have just updated Lightroom to 5.7 to allow me to manipulate files from my Canon 7D mark 2. When I go from Library to Develop there is no basic adjustments available? Help Please?Ray Wood

    I am running a MAC Yosimite 10.10.1 (latest) and have just updated Lightroom to 5.7 to allow me to manipulate files from my Canon 7D mark 2. When I go from Library to Develop there is no basic adjustments available? I have a histogram but no access to the basic controls as per normal.
    How can I get to these?
    Help Please?
    Ray Wood

    See this:
    Missing Panels/Modules - Lightroom Forums

  • Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB  free of space and it is running slow. It takes 10 minutes to start up and things like that. What should I do?

    Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB  free of space and it is running slow. It takes more than 15 minutes to start up and things like that. I cant seem to do anything as it is so slow. The 'beachball of death' is also present during start up. What should I do? Please help

    Try these two steps first. 
    Get the Original Installation disk and boot the MBP holding down the C key.  When you get to the point where you see a menu bar on the top of the display, select UTILITIES.  From the drop down menu select DISK UTILITY>FIRST AID.  Run verify and repair.
    See if there is any improvement.
    Try a Safe Boot:
    http://support.apple.com/kb/HT1455
    This might indicate that third party applications are an issue.
    Ciao.

  • I'm running on Mac OS X 10.5.8. Do I need to buy snow leopard first before upgrading to Mountain Lion?

    I'm running on Mac OS X 10.5.8. Do I need to buy snow leopard first before upgrading to Mountain Lion?

    Make sure your machine meets the minimum system requirements:
    http://www.apple.com/osx/specs/
    Although it says 2 GB RAM is the minimum, it's generally recommended to have at least 4 GB unless you only use your machine for "light" use (no movie editing/burning, etc).

  • Bridge 6.1.0.115 will not run on Mac OS 10.6.8. Unfortunately, I upgraded to the new version. How do I revert to the older version that works with Mac OS 10.6.8?

    Is there a way to download the previous or older version of Bridge CC. The current version will not run on Mac OS 10.6.8. Thanks for any assistance.

    The current version will not run on Mac OS 10.6.8. Thanks for any assistance.
    The easiest way would be to update to at least 10.7.5 (supported on most older Macs) but maybe you have strong reasons not to do so, however it will put you in to more trouble in the future because newer applications have more often the habit of not being able to support older OS versions due to limitations of this old OS.
    Here is the announcement of Adobe:
    http://blogs.adobe.com/creativecloud/moving-ahead-with-mac-os-x-10-7-and-higher/
    However PS CC should still work on your system and otherwise CS6 should. As a cloud subscriber you still have access to both CC and CS6 on the Adobe CC download pages. But only PS is a major upgrade (changed to version 2014) and Bridge has just a minor update and should still work on 10.6.8 I would think?
    Installing the updates and upgrades did not remove or uninstall the CC versions of PS, otherwise use CC application to install CC again.

  • After effects CC doesn't run on MAC PRO

    after effects CC doesn't run on MAC PRO. Only the CS6 version run on this machine. What can i do. Thanks.

    With my MACPRO it's impossible to activate the GPU.
    What can we do. Now it's impossible to enable a video in AECC.
    For information the configuration of my machine and the windows of error in after effect CC.

  • Creative Cloud Desktop download utility running on Mac 10.8 fails to show apps/install apps

    After purchasing subscription, downloading and installing the Creative Cloud Desktop Version (2.0.0.183) utility, I am unable to install a single app. When on the 'App' screen a spinning circle appears. I have tried reinstalling the Creative Cloud Desktop Utility many times, spoken with chat member who suggested deleting a database file in the OOBE folder, then restarting computer—none of these have worked. I have been struggling with this for over 5 hours, trawling forums with little success. I also have older versions of Adobe software (ie CS4. CS5, CS5.5 and CS6 which I do not want to delete).
    I am running a Mac system 10.8, have 50 Gb drive space available and 32 Gb of ram.
    Welcome any help as I purchased software subscription I cannot use.
    Thanks

    KlippyKlein it sounds like you have archived the Opm.db file located in /Users/<UserName>/Library/Application Support/Adobe/OOBE is this correct?
    If so can you also try renaming the Library/Application Support/Adobe/OOBE to OOBE_Old.  Once this is done please reinstall the Creative Cloud application from https://creative.adobe.com/.

  • HT1338 I have a mac mini with an intel i7 quad processor running on Mac OS 10.9. My audio output stopped working all of a sudden, even though the volume is on maximum and un-muted. How do Iget it to start working?

    I just purchased a mac mini with an intel i7 quad processor running on mac OS 10.9.
    While listening to a music video on You Tube the audio stopped working.
    How do I get it to work?

    See: https://discussions.apple.com/message/25486455#25486455

Maybe you are looking for

  • How to add Comma and Tabs in Calc Script Header

    Hi, I need to add in the begging of the report script the following lines: PNL OPENB 1/31/2020 12 R,N,Y 5     6     7     2     3     1     I     C     8     9     A     D     V     V     V     V     V     V     V     V     V     V     V     V The la

  • Why is the install button different?

    HI, recently I uninstalled an app and wanted to reinstall it. When I went to the App Store on my iPhone, that app did not have the 'Free' button which u click to download it, but rather a small button with a picture of acloud on it. What does this me

  • How to protect image and text from page break

    Hi I have set on a smartform a single row which contains two columns. The first column has an image, and the second has some text. I want the program to send the whole row to the next page if it does not fit the page, instead of breaking it up in sep

  • C4C Integration with ECC (popup in ECC during connection)

    Hi, can someone please help me, to find the issue when sending e.g. customer master from ECC to C4C via HCI. In ECC I receive the following popup asking about username/password on HCI.... I activated certificate based authentication.... ¨ Thank you!

  • Advice request : incorporating graphs/charts within XSQL publishing framework

    I wonder if anyone out there could offer any useful suggestions. I am fairly comfortable with using XSQL to produce fairly advanced web pages. However, if I wanted to incorporate graphics, specifically graphs and charts, what is the best way of going