PE 11 does not recognize Sony HDR FX1000

Windows 8.1 recognizes the camera attasched via Firewire, but PE 11 does not recognize it. Menu setting on camera is automatic and iLink out.

Continuing saga on quality of rendered project when burning to Blu-ray.
When I play back my video through my 65inch HD TV being fed directly from the Sony HDR FX-1000 the video looks HD quality. I import the files inot my project from the camera as HDV 1080i 29fps (as recorded) frame size 1440 x1080, HD Anamorphic (1.333)
Field Order--- Upper Field First followed by Reverse Field Dominance. PE 11 then codecs and saves the files to MPEG2. When I finish editing.... I select Blu-ray and then burn the disc. The quality is less than than the playback of the raw footage on HD TV. Seems to loose quality from the raw tape footage. If you really want to say poor quality.... try to burn that saved peoject as a regular DVD,,,, I did that for a relative because they did not have a Blu-ray DVD player.
My computer has no problems rendering.
Intel DP55KG MOBO
Intel i7 CPU [email protected]
16 GB RAM
Win 8.1 64 bit
Additional question.... what would be the best settings to make a Blu-ray quality slide show using a Nikon D800 Raw files?
Thanks,
Ron

Similar Messages

Sony Bravia TV does not recognize Apple TV

I have plugged everything in, power and hdmi etc but in the HDMI input settings the Sony TV does not recognize the Apple TV...
Any ideas??

There are no video adjustements on AppleTV 2.
It outputs a 720p signal.
I would imagine your TV accepts that if it has HDMI.
Try the usual troubleshooting steps:
1 - Turn everything connected on/off at the mains and restart
2 - Try a different HDMI lead if you have one.
3 - Try a different HDMI input on the TV if you have one
4 - Try a different TV set with HDMI input to try to rule out a faulty AppleTV
If none of the steps above work, specifically 4, I would assume AppleTV is a lemon/faulty and exchange it.
If it works ok with another set then it's probably an HDMI incompatibility issue, almost certainly at AppleTV end as you rarely hear of problems with other devices and HDMI, and there are known HDMI glitches with some sets. If it's an incompatibility I would take it back for a refund myself, but do let Apple know here:
http://www.apple.com/feedback/appletv.html
so they can try to fix it in a future software update for the device. Provide them the TV make/model number.

Imovie 4 does not recognize my Sony Handycam DCR-TRV310 so I can't import.

I have used this camera before with out problems but must have been imovie 2.
The program does not recognize the camara. I have unpluged and plugged and restarted and done everything that I have read to do but still nothing. help

I have gone through the steps of this article. I am connected by firewire. I have disconected, recontected, turn on and off and restarted and nothing. I have made sure the date and time are correct. I did upload this tape from at old VHS tape of family pictures. This handycam wasn't a problem with older imovie versions and older systems 9. When I go to the sony site they only talk about connecting to a pc. When I go to apple profiler and fire wire is just says "
Fire Wire bus: Max speeed up to 400 Mb/sec" It does not recognize the camara. The only thing that I have not done is go buy a new firewire cord but I am worried that imovie can't recongnize the camara. Thanks for the help

My Sony Xperia ZL does not recognize the last update of the software

My Sony Xperia ZL does not recognize the last update of the software or from the same mobile or from the computer app, I formatted the phone but it still does not recognize it when I give updates check it tells me that the phone have the latest software.
Thanks

You can find the latest available software update information on our product blog. When an update is available for your phone you will get a notification.
If want to know more about software roll out process and how it works please see this topic.

Digital Editions does not recognize and authorize sony PRS-505

The problem is that it my first purchase a DRMed ebook at dieselbooks and I dowloaded digital editions and authorized it with no problems,
i downloaded the ebook and i was able to read it on digital editions. But the problem is that when i plug in the sony reader digital editions does not recognize it, so i cant authorize it and im unable to read the ebook on sony reader prs 505.
Since the ebook is DRMed i cant use another program to do it, i tried acrobat 8 with no solution.
Do you guys have an idea how to solve this problem?

Make sure you have installed and are running the latest Sony EBL software, the installation contains the needed drivers for ADE to talk to the 505. Note: if you are running on a Mac, ADE will not be able to talk to the 505 and you will have to use the Sony EBL 3.x instead.

IMovie (and iMac) does not recognize device(s)

Hello and thanks for reading. I know this topic is like beating a dead horse but this one is unique. I'm a professional editor and I couldn't figure this out so any help would be appreciated. Here's the play by play:
I edit using FCP 5.1.4 and have for years. I've had the same set up running for years and do high volume editing.
I have a chain of 4 Lacie drives, all connected by firewire.
At the end of that string, I have my tape player for capturing footage, a Sony GV-HD700, which then goes on to the TVs, DVD players, etc.
Also the end of that string, I also have a disc burner for making DVDs.
So it goes: iMac > Lacie #1 > Lacie #2 > Lacie #3 > Lacie #4 > Sony tape player & DVD burner > TVs, VCRs, etc.
Yesterday, I was in a rush and the DVD burner was going slow so I unplugged it from the end of the string of Lacie drives and plugged it directly into the back of the computer to see if it would burn faster.
It didn't, so I plugged it back into the end of the Lacie string.
At that point, Lacie #4 became unrecognizable to the computer and therefore so was the tape player, which is further down the chain.
When I plugged the tape player high up the chain, into Lacie #3, it still was not recognized.
I plugged the tape player (Sony GV-HD700) directly into the back of the computer...still not recognized.
I took the Sony GV-HD700 into our other editing bay and it was still not recognized.
I pulled out my camera (Sony HDR-FX1000) and plugged it directly into the back of the original computer...recognized just fine.
I plugged Sony HDR-FX1000 camera into the back of Lacie #2...recognized just fine.
I took the Sony HDR-FX1000 camera into our other editing bay...recognized just fine.
I have a big deadline so I said "Screw it." and was just going to capture from the camera for the time being.
I reset the Lacie drive chain, plugged the Camera into the back of Lacie #4 (just like the original setup) and BANG: Lacie #4 and the Sony HDR-FX1000 camera was not recognized.
I plugged the Sony HDR-FX1000 camera directly into the back of the computer...still not recognized.
I took the Sony HDR-FX1000 camera into our other editing bay...still not recognized.
I thought it might be a Final Cut Pro issue so I pulled up iMovie and it does not recognize any device connected to the computer even though I'm looking directly at it plugged in.
The entire iMac has lost the ability to recognize devices that I've used for years. I've now lost the ability to capture footage and I'm running out of time. It's almost as if the devices were getting infected by one of the Lacie drives (I think Lacie #4). Is that even possible? Has anyone ever heard of something like this? I don't know if it's something I need to change on the iMac to recognize them again, or if it's a setting on the device to reset the connection, or if somehow the Lacie drive corrupted the devices and made them unrecognizable to iMacs.
It's very, very weird.
Thanks for your help.
27" iMac (2009)
OS X 10.8.5
Final Cut Pro 5.1.4
Tape player: Sony GV-HD700
Camera: Sony HDR-FX1000
I've had this setup for years so I don't know what type firewire it is.

See:
iOS: Device not recognized in iTunes for Windows

IMovie '11 won't recognize Sony HDR-XR100

I know there are a hundred other threads on this subject, but I can't find the answer I am looking for. I am using fresh installed iMovie '11 (9.0.6) on an Intel Core 2 iMac with OS 10.7.4 the camera is a Sony DCR-XR100.
iMovie only seems to recognize the iMac's built in camera. If I opena new finder window, I can't even locate the HD on the camera. The cable definitely works because I can download photos from my Nikon, and also, it scolds me if I turn off the viseo camera while it is still connected to the camera.
The really frustratingt thing is that this was all so easy when I was using a mini-DV camera back in the day. Plug it in and import. I want to goet back to there. Is it possible to make this run seamlessly?

I've read dozens of help articles on this and am still nowhere. If I go to about this Mac and check USB devices, I can see that the camera is connected, but iMovie still does not recognize it. I also cannot look in the harddrive through by opening a new Finder window.

ITunes does not recognize my iPhone 4 or iPad 2

I bought an iPhone 4 and an iPad 2 yesterday... have not been able to use any of them so far as itunes does not recognize either of them on my machine.. have tried several times to restart the machine, reinstall iTunes etc etc.. I have a Sony Viao with Windows Vistas Home Edition, and of course am running as an Administrator.
Anyone has faced this problem earlier - any pointers would be greatly appreciated.
Regards,
Saurabh

Zanaters wrote:
I don't have this problem with my windows machine. Unfortunately, a new policy in the company requires that ITunes not be on your computer or you may be terminated. I've got one week to figure out why things are different so that I am good to go for the future.
First off, copy the entire /Music/iTunes/ folder from your work computer to an external drive.
Copy it to /Music/ on your personal computer.
Try using a USB port on the back of the computer.
If the devices are still not discovered, see this -> http://www.apple.com/support/iphone/troubleshooting/

Nokia Updater does not recognize N91 connected via...

My fone has gone loco on me of late.. freezes about 3ce a day, and after deleting EVERY thing on my phone memory without any improvements, i decided to get an update on the software. problem is, the new updater 1.02.03 or sumn.. does not recognize that my phone is connected, even though the new pc suite does when i try it out.. what could i be doing wrong? (yes, i checked, there is an update for the code my phone carries) thanks for the help (i hope i get..)

Hi,
I faced this problem, make sure you have the latest updater and the PC suite installed. The best would be to remove both from your computer and fresh download and install.
Once you have installed it on the PC, now connect the phone (a PC suite is also installed on ur phone during the PC suite installation on the computer). I STRONGLY RECOMMEND THAT YOU USE THE CABLE THAT CAME WITH UR PHONE.
Select PC suite from the phone.
Start the updater as it is starting, u will see the prompt "Phone Disconnected from the PC suite" on your computer.
Now it should (ideally) start the process.
Cheers
NOTE: YOU WILL LOSE ALL DATA.. and FW should be 2.10.xxx (as i think this is the lates one yet)
Cheers
Nokia 8800e-1 (ARTE), V 05.21, 30-11-2007, RM-233
Phones used: Nokia 3600, 6110, 6600, 8210, 8910i, 9500, N70, N91, 8800 SIROCCO
Sony Erricsson: K900, T610
Motorola, V3, L7

PS CS6 does not recognize my EOS Mark III

It is no problem to use the lens correction in PS CS6 with my EOS 7D and the 24-105 IS L lens. Using my new EOS Mark III with the same lens, Photoshop does not recognize the lens. And in the dropdown menu, where you can normally choose the camera type, Canon is no available (Nikon, Pentax, Sony... are available.). Why is that so? Lightroom 4 has no problem with that issue.

Hi Noel,
I know fairly little about how Adobe accumulates lens profile data, but I have always thought that it's at least in part user-submitted (though I'll be darned if I've ever run across a description of how to do it).
You should hopefully find informaion here:
http://labs.adobe.com/technologies/lensprofile_creator/
And can ask questions here:
http://forums.adobe.com/community/labs/lensprofile_creator
I don't keep up with this utility so I can't say if it's very active. The last update reads 4/2011.
regards,
steve

Still having problems - FC does not recognize HD camera!

Camera: Sony HVRA1U. Final cut does not recognize it.
Audio/Video Settings are:
Sequence Preset: HDV1080i60
Capture Preset: HDV
Device Control Preset: Sony HDV (I think)
Camera menu settings:
VCR HDV/DV: HDV
iLink Con: Off
Nothing. Just does not recognize the camera. Now, it does on iMovie. So what's the deal? I've restarted all systems, unplugged every cable, etc. Done everything possible.
To top it off, it HAS recognized it before. Now it's just stopped.
Also, I'm not exactly computer savvy so I'll need a step by step approach on how I could possibly solve this. Thanks.

Welcome to the Apple Discussions. First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try again.
A workaround would be to use Image Capture to upload from the camera to a folder on the desktop and then import into iPhoto. Or you may have to use a card reader, drag the image files from it to a folder on the desktop and then import (a preferred workflow IMO).
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

IPhoto 05 does not recognize my camera

Installed iLife 05 last spring. Dug out my SONY Mavica CD300 camera this winter and 05 does not recognize it. The previous version (03, I think--came with computer) did recognize it. SONY support was no help; they suggested Image Capture, which didn't recognize it either. Now what should I try?

Welcome to the Apple Discussions.
You could try to rule out a hardware problem with the camera's USB port, USB cable, or your Mac's USB port. Open your System Profiler (Applications > Utilities > System Profiler) and see if the camera is listed under Hardware > USB. If the camera shows up there, a hardware problem is unlikely. If it does not list there, try a different USB cable, different port on the Mac, or try the camera in another computer.
Regards.

My Xperia does not recognize My headphones

Please helpme my Sony Xperia z3 does not recognize My headphones. I connect it but I can not Hear nothing on them.

Settings > apps > all > smartconnect > clear data > restart the phone > if that doesn't work then repair the phone with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

ADE Does Not Recognize My NOOK Tablet

I have searched the forum for answers, but so far no one seems to have the same problem I am experiencing. I have been using a Win 7 PC to download EPUB books from my local library for nearly two years with no problems. Seemingly overnight ADE no longer recognizes my NOOK. I have tried rebooting the PC, uninstalling/reinstalling both ADE 1.7.2 and 2.0 (I am now back to 1.7.2 after seeing other posts re: 2.0). I have unauthorized and reauthorized ADE, and it still does not recognize my NOOK when it is plugged in. The cord/connection seem to be fine; I can see the NOOK in Explorer, but not with ADE. I have also deleted the ".adobe-digital-editions" and "digital editions" folders on the root of the NOOK's drive to initiate the download process. No luck so far; does anyone have any ideas on next steps? Thank you

With Sony ereaders you must have some extra Sony software.
If you don't, you get exactly what you see; the device is seen in Explorer but not in ADE.
I don't know if there is anything similar with the Nook, but I mention it just in case.
In the case of the Sony, the extra software is installed with Sony Reader software;
but you don't have to run the Sony Reader for the extra software to have its effect on ADE.
If for some odd reason you can't get the Nook recognized,
you should still be able to borrow books as usual and download the file using ADE,
and then transfer the .epub file to the Nook using Explorer.
As long as the Nook is still authorized with your ID, you will be able to read the books on the Nook.
A bit more of a faff than direct ADE transfer, but not too inconvenient.

Disc drive does not recognize CDs

Hi,
I have a 17" iMac G4 1.25ghz, 512mb memory, Mac OS 10.5.1, and it does not recognize CDs anymore. I can burn and read DVDs, but I can't read CDs. I don't know if I can burn a CD because it can never recognize the blank media. My system profiler reads:
Sony DVD-RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 8192 KV
Reads DVD: Yes
CD-Write: -R, -RW
DVD Write: -R, -RW, +R, +RW
Write STrategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert Media and refresh to show available burn speeds
It is not only blank CDs it doesn't recognize, it is any CD. It can't read a media CD, it can't read the Microsoft Office CD, or any other CD. When I put in a CD, I hear some grinding noise, then a little whirring, but never a normal sound, like when I put a DVD in. I'm not sure, but I think Leopard messed it up.
Is anyone else having this problem? Please help me. I really want this computer to work - it is my secondary computer, and I don't want to have to install software to it by using my new iMac, or iBook, and put this computer into target disc mode.

The PRAM basically memory on your motherboard, powered by a battery that retain your settings while your computer is turned off or unplugged from the wall. You can find how to reset it here:
http://docs.info.apple.com/article.html?artnum=2238
You should not need to reset the smc, it was an extra step I took because I have done it with my intel iMac (I'm not sure if it does anything for the iMac G4). However, to reset it (if it does anything) you simply unplug your computer from the wall and wait about a minute, then plug it back in.
Hope this helps

PE 11 does not recognize Sony HDR FX1000

Similar Messages

Maybe you are looking for