PE 2.0 working with existing slideshow

I have had elements 2.0 for quite a while, but I just now decided to create a slide show. I was able to create one, but my pictures are not in the order that I want. I cannot find a way to work with the slide show once created. I need to be able to re-arrange the photos in the slide show? Thanks for any help I can get.

Pam,
The PSE slide show creation has changed very significantly between v2 that the thread originator has and v4 which you have. So any answers for her question will probably not apply to your problem.
So it would really be better for you to create a new thread using
b Add Topic.
Here is one point as a starter - a method that I often use is to make an Organizer
b Collection
and drag and drop within the Collection to set the initial sequence for the slide show, then Select all the photos in the Collection and click on the Create to start the slide show process.
However, that is not the only possible method. So if that is not what you want, then when you create the new topic, do explain in more detail whether you added the photos to the slide show from the Organizer or from a folder and also how you arranged them.
Barb O

Similar Messages

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

  • Working with existing HTML

    Hello all,
    I am anxiously working with Edge Animate and very excited at the prospect of what it has to offer. However, I'm running into problems working with existing HTML files. Specifically, when I open an HTML file created outside of Edge, I've noticed that elements such as div's, etc are set to "static" and not "managed". Thus, I am unable to access some parameters, like setting x/y and scale to percentages. Also, the stage is omitted and I can't see how to add a stage. I assume opening an HTML file and developing with Edge is not the way to do this?

    Hi, Nando-
    If you open an existing HTML, it will use the structure of that file and will try to keep it as close to its original state as possible, as you may have added CSS formatting to the div that we don't want to overwrite.  Thus, it becomes a "static" item instead of a "managed" element.  You can create your own managed elements on top of a file that you open by drawing rectangles/roundrects/ellipses (a div), adding text, or importing images to the stage, and all of these elements will be able to be changed using the controls in the toolbar and properties panel.
    Hope that helps.
    -Elaine

  • Unable now to import TIFs or to work with existing TIFs

    This has been observed by other people but no answers forthcoming. I used to be able to import TIFs into an earlier version of iPhoto without any problem. However, now I cannot either import TIFs (error message warning of incorrect file type or similar text). Neither can I preview or work with those already imported prior to installing iPhoto6 and/or latest OSX updates.
    Is there anyway of extracting the existing TIFs in the library ? I can't find any easy way to select by file type or filesize.

    Roger:
    Welcome to the Apple Discussions. Where are those tiffs located that give you the error message when you try to import? If they are inside the iPhoto Library folder then that's the reason. You must move them out of that folder to be able to import them.
    What do you get in the Edit window when you try to edit an existing tiff, a white window with the spinning cog? If so Download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field.

  • How do i set up an iCloud account to work with existing hotmail account

    So i have iphone 4s and a macbook and i want the email address that i used to have sync via fetching the data manually to work with icloud, I made an icloud account so that i could do this but now that and the other email account are seperate so nothing ever syncs, how can i just add my hotmail account to icloud to make it sync to my iphone automatically?

    There is no way to setup iCloud on a PC, it must be setup first on a compatible Mac, iPhone, iPad or iPod touch.

  • ITunes No Longer Working With iPhoto Slideshow

    I'm not certain, but as I can no longer play music from my iTunes Library along with an iPhoto Slideshow, I think this is related to the new 7.7 iTunes update.
    My iPhoto by the way, is the last version - 6.0.6.
    Has anyone else noticed a new-found inability to have songs in your iTunes Library accompany an iPhoto Slideshow? And better still - how can this be fixed?
    Thanks kindly,
    john

    I just discovered that after the iTunes update and the Lion update, my iTunes wouldn't update anything except what was in the library already.  New songs, apps, movies all equaled bupkiss.  I went into advanced settings and saw that my library location was blank.  I'm using an external drive for my music.  So there's a bug, since it would play everything thing in the library but was unsure where the library was so that it could write to it.  I just relocated my media drive and now sharing and updating the library works fine. 

  • Will Aperture work with existing iWeb pages and MM galleries from iPhoto?

    Now that Aperture is available as an $80 app, I am considering moving from iPhoto to Aperture. If I do, will Aperture work seamlessly with my existing iWeb pages and MM galleries, set up via iWeb and/or iPhoto? The other editing programs I use on occasion are Nikon Capture NX2, and Photoshop Elements. Also, if I want to at time remain in "simple iPhoto" mode while using Aperture, is this possible, or will my life be more complicated for every edit? Thank you!

    Slightly disappointed in the dearth of good web page
    creating options in Aperture (you'd think they'd be
    better, no?). Can I get iWeb and create web pages
    using my Aperture photos?
    Yes, iWeb can access your Aperture images if you've enabled previous. I tried this and found iWeb's web galleries quite horrid. After experimenting with a variety of options, I settled on customizing Aperture's web galleries and grafting together pages created by the two programs. iWeb works fine for throwing together some top level pages, and you can then hang Aperture web galleries off them as external links. Several folks have posted instructions on how to do this, and one fellow assembled a nice PDF.
    Cheers,
    Andreas

  • How to make the rating/flagging feature work with impromptu slideshow?

    I have LR 5.2 and when I review newly imported images with an impromptu slideshow to rate and flag the image in the slideshow, the relevant "flag as pick" or "set as rejected" notification shows on the screen but at the end of the slideshow only the first image is picked or rejected and the rest remain unchanged.
    I have tried the fix that adobe published for 5.0 - changing the ui.dll but that fix prevents LR5.2 from loading alltogether.
    Any suggestions please?

    FurryHerbington wrote:
    I have tried the fix that adobe published for 5.0 - changing the ui.dll but that fix prevents LR5.2 from loading alltogether.
    the ui.dll is for 5.0 only, not compatible with 5.2, and since the fix was incorporated in 5.2, ui.dll is no longer needed.
    Unfortunately, I can't help with the pick flags - they sorta work on my copy, but slideshow has been so problematic for me for so long that I just don't use it. In the tests I just did for you to check the pick flags - first test: the pick flags did not work correctly (behavior as you stated), the rest of the tests the pick flags worked properly, but something else didn't. e.g. which monitor was used changed between tests, and the manual slideshow became automatic at full speed. In all tests the color/tone are off.
    Lr's impromptu slideshow is useless for me - made worse over time, not better.
    Sorry I've not been more help, but that's all I got...
    PS - I use ShowBiz for in-Lr slideshows - has not all the bells/whistles, but at least it works, and it's full-screen (in Lr5) too, which I like.
    Cheers,
    Rob

  • How to creare function to work with EXISTS function

    Hello,
    I would need some help with code in where clause. I have 6 queries which has a same condition:
    AND NOT EXISTS (SELECT 0
    FROM TAB1 T1
    WHERE T1.COL1 = T2.COL1
    AND T1.COL2 = T2.COL2)
    I would like to write some function so I don't have to change a code in every statement:
    AND NOT EXISTS FUNCTION1(T2.COL1, T2.COL2);
    I wonder if that is possible. I was searching forum and documentation but did not find nothing useful. I do not know what type of function must be and how this could work. If someone now please help.
    Regards,
    Igor

    user5528050 wrote:
    Hello,
    I would need some help with code in where clause. I have 6 queries which has a same condition:
    AND NOT EXISTS (SELECT 0
    FROM TAB1 T1
    WHERE T1.COL1 = T2.COL1
    AND T1.COL2 = T2.COL2)
    I would like to write some function so I don't have to change a code in every statement:
    AND NOT EXISTS FUNCTION1(T2.COL1, T2.COL2);
    I wonder if that is possible. I was searching forum and documentation but did not find nothing useful. I do not know what type of function must be and how this could work. If someone now please help.
    Regards,
    IgorHello
    If your 6 queries are hitting the same tables but are applying different where clauses i.e. filters, you might benefit from creating a view to encapsulate the common SQL. That way you only have to implement the core logic once and you can have your 6 queries go to the view... i.e.
    CREATE OR REPLACE VIEW v_myview
    AS
    SELECT
       a,b,c,d....
    FROM
       t2....
    WHERE
        NOT EXISTS (SELECT 0
                           FROM TAB1 T1
                           WHERE T1.COL1 = T2.COL1
                           AND T1.COL2 = T2.COL2)
    select * from v_myview WHERE a = 100
    /HTH
    David

  • Will the iPhone 5 work with existing USB car chargers?

    Just curious (and maybe stupid).

    "4G" is a marketing term, not a technical term.
    The iPhone 5 can operate on any compatible HSPA+ network anywhere in the world. HSPA+ is defined by the ITU as "4G" and is marketed as such by many carriers. The only iPhones I'm aware of that display "4G" in the status bar are those originally intended for AT&T in the U.S.
    LTE is also defined as "4G" and is marketed as such by pretty much every carrier that has an LTE network. When connected to an LTE network, "LTE" should appear in the status bar.
    The frequencies used for LTE networks vary from region to region across the globe. In order to use an available LTE network, the phone you're using must have been sold to work in your region.
    Apple doesn't have to "enable" anything for it to work. All you need is a phone that's compatible with your network, and a plan that allows for LTE data.
    If you purchased the phone from another region, the U.S. for example, it will NOT work on the LTE netwok in your part of the world.

  • Could Oracle 10g (in a server)  work with existing Oracle 9i client

    Hello!
    I am new in Oracle, and I was wondering if it’s possible to use Oracle 10g in a server with clients using Oracle 9i. Would that work? Are they compatible?.
    Thanks!

    my 9.2 client can not connect to 10g server,
    It says that "this application requires that you have been granted to select any dictionary privelege".
    my 10 g client connecting normally, but i have many terminal computers with 9 client.
    Tell me how to connect to 10g server from 9 client please.

  • LaPastenague can you help? TC is refusing to work with existing modem/router

    My home office network setup is driving me mad!  I've identified the issue - my TC is competing with my modem/router.  What I haven't been able to do is fix the problem.  I've tried setting it up as a bridge, tried turning off wireless and nothing has worked.  Are you able to help before I throw an almighty tantrum?
    Here's my set up:
    * Primary computer is a MacBook Air which is on wireless 24/7
    * Secondary computer is a MacBook Pro, also operating on wireless
    * Time capsule is used as a server of sorts, to store all our files which are then accessed via the laptops.  It's only a few months old.
    * Router is also new (yes, someone sold us incompatible devices).  It's a Netgear D6200. 
    * We've set up both a 5G and a 2.4G wireless network, but operate on 5G 99% of the time
    * There are 2 x Airport Express in the house - one connected to the printer, one connected to the surround sound system
    * There are also 2 x Apple TVs and 1 x iPhone connected to the network
    Are you able to help me figure out the best setup?  I know it's possible - I just can't figure out how to do it

    I presume the modems you've suggested are all compatible with my apple devices?  I read somewhere amidst your recommendations that apple doesn't play nicely with non-apple modem/routers.
    Depends on brands.. Netgear is near the bottom.. overall TP-Link is pretty good.. they are certainly aware of the need to test against Apple products and special protocols, and tweak here and there to get better results.
    It is important to understand though.. what I want you to do is basically turn the modem router into a dumb modem.. it will have no part in the network other than translation of ethernet packets to ATM phone networking packets. All the routing will be handled by the Apple router.
    Yes, the Netgear is a wifi/DSL modem & router.  I'm using wireless on the Netgear.  I didn't turn wireless off on this device as I assumed I should be relying on that as my router given it was recommended instore.  I'll give that a go now.
    Shakes head::
    Never ever believe what the salesman in the store tells you. He always has one at home that works perfectly with every piece of equipment you happen to have. And it fixes warts and herpes.. and most everything.. the bottle says snake oil. Apply liberally to dumb customers.
    The reason I suggest a very cheap modem.. is that it will do nothing .. except translate packets. Ethernet to ATM.. ATM to Ethernet.. completely dumb.. You can bridge the Netgear but that seems a horrible waste.. I would prefer you to return it to the store for refund.. or at worst sell it off..
    Even if you need to use it as a router.. which we are still getting to.. there is no need to use its wireless.
    Anyway keep in touch with how it goes.
    Are you in Oz? Who is your ISP?

  • Install Forms 6i to work with existing 8i setup

    I am trying to install Forms 6i for use with an existing 8i Enterprise setup. When I ran the installation I was prompted for a new home. I specified a new home and Forms 6i was succesfully installed into this home. I wish to now use Procedure Builder and other Forms tools with the 8i database. When I am prompted to login to the database I specify my login and password and supply the 8i database name. I get an error TNS: could not resolve service name. What can I do to fix this?
    -john

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by tom hiang ([email protected]):
    john visit this web will solve your problem
    [URL=http://www.chow1.myweb.nl/po815.htm]http://www.chow1.myweb.nl/po815.htm
    <HR></BLOCKQUOTE>
    Tom, thanks for the reply, I checked out the site. I have Oracle 8i Enterprise on my box. It looks like the instructions are for standalone operation. Is this correct?
    null

  • Work with existing wifi?

    I already have home wifi, with both Mac and PC connected..  Can I have time capsule simply connect to that existing network?

    TC will be on the same network.. the wireless and switch simply become extensions of the existing router.. so you can setup wireless, and any computer connecting directly to the TC is directly connected to a computer on wireless from the existing network..
    The main thing is you have just one router.. the existing one.. once you bridge the TC.. it is a fancy WAP, switch and network drive.

Maybe you are looking for