PE 4.0 - how do I make PART of a clip slow-mo??? is it possible?

I see many tutorials on how to make something slow motion, I understand fully how to do that. I'm a skateshop owner and have been filming recently, and have been teaching myself how to use Adobe Premiere Elements 4. I know how to make an entire clip slow motion, but I need to know how in the world do you make JUST a portion of a clip slow motion, or is it even possible in this program??? I've been racking my brain for days now, and I can't figure it out. help?

Glad that it got you what you needed. Sometimes, things are pretty simple. Other times, they require 40 pages of single-spaced type!
Also, though you did "cut" your Clip on the Timeline, PrE is a non-destructive editor, so your original Asset is untouched.
Good luck,
Hunt

Similar Messages

  • Flash html5 - How can i make an internal movie clip slow down and stop when it get to a certain frame?

    I am creating an automotive braking system using flash and have a wheel turning. I want the wheel to slow down and stop after the brake pedal is pushed at a certain frame. I know I could do this with frame by frame animation but was hoping there was a short cut - javascript?? If not the slowing down portion then is there code for just making the internal movie clip (wheel turning) to stop when it gets to a frame.? Thanks

    you can use the ticker class to create a loop that you use to control the wheel's rotation or frame, TweenJS v0.6.0 API Documentation : Ticker

  • How can i make a transition between clips on cutaway?

    how can i make a transition between clips on cutaway?

    ninafromlisboa wrote:
    But if I want ONLY fade out (or in) I can't do it...
    OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
    BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
    John

  • How can I edit part of a clip

    How can I edit part of a clip in iMovie.

    First, select the portion of the clip that you would like to edit. Do this by dragging your mouse. A yellow border should be around this portion of the clip.
    Next, right-click inside the yellow border and select SPLIT CLIP. Now you have a separate clip that you can apply your edit to.

  • How can i make a signature by using lightroom? , is it possible?

    how can i make a signature by using lightroom? , is it possible?

    To can create a text identity plate in LR but to create a graphical version
    requires Photoshop

  • How to selectively import part of a clip in the import window on FCP X ver 10.8

    Hi guys just wondering how to selectivly import part of a clip in the import window, cant do it since 10.6 ver??. im now using 10.8

    If you jump to 10.1 you will be wise to understand the use of the NEW Libraries and how they update.
    Things have changed.
    I'll post some info when I find it.
    Found it:
    http://www.apple.com/final-cut-pro/docs/Media_Management.pdf
    Al

  • How do I make part of a path be below and another part of the path be above another object?

    Hi! I have a figure as below:
    You can see that the red circles intersect the blue one twice each. One of these intersects (the lower one) should be below the blue circle while the other should be above the blue circle. How can I make this happen? Can I use the shape builder tool somehow?
    I'm pretty much a beginner using illustrator so if it's possible to explain simply, please do.
    //ekmanch

    there's no real way of making a single path go both over and under another path, so you generally just cut it where you want that to happen.

  • In actionscript 3.0 how do i make a nested movie clip button go to a frame on the main timeline

    I am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button
    I added an event listener to the blog button by saying,
    blog.addEventListener(MouseEvent.ROLL_OVER,gotoblog);
    function gotoblog(evtobj:MouseEvent){
         gotoAndStop(2)
    this part of the code works it goes to the 2nd frame of the timeline it is in and stops wich is a blown up version of the origanal symbol
    i added on frame 2 a second command
    blog.addEventListener(MouseEvent.CLICK.gotoblogpage);
    function gotoblogpage(evtobj:MouseEvent){
    gotoAndStop("blogframe")
    trace("the blog button was clicked")
    i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?

    I have a similar problem if could please help me i'd really apreciate it!!
    So i have a looping animation of some thumbnails, the hierarchy goes like this
    Scene1(main timeline) -> imgBar(MC)->imgBarB(MC within the imgBar MC)
    My buttons symbols are in the last MC "imgBarB" where i have this code:
    ss1.addEventListener(MouseEvent.CLICK, OneButtonClicked);
      function OneButtonClicked(event:MouseEvent):void{
      MovieClip(root).gotoAndStop("ssbox1");
    I want to control the Btns in my "imgBarB" MC to play a labeled frame(named "ssbox1") on another MC on the main timeline,this other MC goes like this:
    Scene1(main timeline)->ssbox_mc(MC where my labeled frame is)

  • How can I stretch part of a clip only?

    I am trying to replace the originally recorded voice audio with a re-recorded, clean version. I used the Automatic Speecha Alignment tool and it did an OK job, but it's not quite perfect. I now need to adjust some parts of the clip that are not perfectly aligned, while leaving the parts that are already aligned correctly in place.
    Is it possible to stretch part of a clip, leaving the rest where it is? I think of this like the After Effects Puppet tool, but for audio.

    You might get on better with the original method if you break down the parts that you are having difficulty with matching into smaller sections, and reapplying the Speech Alignment Tool to them like that - which is, in a way, similar to what you'd have to do with the clips; ie, split them up.

  • How do I select part of a clip to import in Final Cut Pro 10.0.7?

    Greetings. I'm a newby in FCPX.  I've been watching Michael Wohl's tutorial and it looks like I should be able to mark parts of clips stored on my HD to import into the event browser.  But I don't seem to be able to mark the clips with either the "i o " keys or dragging.  Only the full length clip can be selected. Is this feature diabled in 10.0.7  or am I missing something?  I also don't seem to have the film strip/list icons at the bottom of the Media Import window.  thanks!

    This capability only exists when importing from a camera card or camera archive.
    You can't select part of a clip to import from a hard drive movie file.

  • How can I make part of the text bold

         TheProfileRoot.EngineeringText.text = "Level " + PlayerEngineerLevel + " Engineer - level up in " + PlayerReqEngineer + " xp";
    I want the "Level " + PlayerEngineerLevel to be bold. And the rest to be plain. How can I do this?

    I can't troubleshoot AS2.0 right now as my computer is undergoing a recovery, but from your post I can see a solution.  Assign variables to several text fields, some of them with the attributes of having bold text assigned in the Flash authoring platform, and some of them having default values.  I am sure there are attributes such as boldness that can be set using AS2.0 but again I can't troubleshoot and my reference material is not with me right now.  (Most of my reference material is for AS3.0 which I am in the process of learning)

  • How to keep selected parts of a clip in PRE9/Mac?

    Sometimes I wish to make the following: insert a (e.g.) 10-minute clip in the timeline, and then keep only portions of it, for example: 2nd-3rd minute and 5th minute. It is something that I can do, for example, with Elgato Turbo.264 HD Software Edition, but I haven't found yet how to achieve it with PRE9/Mac. Please notice that I do NOT refer to simple trimming offered through in and out markers.
    Any help/suggestions?

    Thanks for that. It appears that Elgato can set multiple In & Out Points for a Clip at the same time. Unfortunately, I am not aware of any such feature in PrE (or PrPro). I think that this would be a good subject for a Feature Request, as I can see why you'd like to do it this way.
    Even with the Trim Monitor in PrPro, I do not think that this is possible, but will check. Obviously, that will not help PrE users, but would point up that in the "big brother" program, PrPro, it is possible, so should not be all THAT difficult to implement in PrE - maybe PrE 10?
    Thanks for educating me on Elgato. I see where that could possibly save a bit of time.
    One more question: after you have set the In & Out Points to basically create Instances from that Clip, do you just drag to the Timeline, and all Instances come in, and butt-up to each other? If so, pretty neat, and it would save a couple of Click-drag operations.
    Good luck,
    Hunt

  • How can I make all 40 audio clips the same volume?

    Hello, all!
    I'm finishing up a General Orientation video for new employees in Yellowstone National Park and am-this-close to being finished!
    I'm creating the video in Premier Elements 9 with some video footage and some still photos blended together.  (Yes, I tried to "Ken Burns" it...  he would laugh out loud if he saw my version!)
    I've narrated most of it in individual WAV. clips that I've inserted into the audio timeline under each video segment.
    I have about 40 audio clips, and even though I used a decent microphone, I still find that each clip has a slightly different volume that is really noticeable when the video DVD plays on TV.  I'm realizing that I should have made an effort to keep a standard distance from the mic when recording.   Hindsight is 20-20.
    I have been trying to change the volume on each clip to make them all the same volume, and it's making me a little crazy.
    Is there any way for me to capture all the audio at one time and make an adjustment that would make all of them the same volume?    I tried CTL-A and then did "normalize" on it, but it seemed to make very little/or no difference when viewing.
    Any advice would be really appreciated!
    Signed, the lone creative video girl in Yellowstone.  

    You are most welcome, and it has been a great day. Thanks!
    Good luck, and pay close attention to the differences between Clip Keyframes and Track Keyframes. They accomplish the same result, but have differences.
    Good luck,
    Hunt

  • How do I make a dashboard web clip widget inactive and then delete it?

    How do I delete a widget if I cannot access my dashboard because of that widget? Each time I open the dashboard it jumps automatically to a web page that wants to be the page I tried to web clip, but is just a blank page. I cannot use any functions of the dashboard.

    Thanks dominic23, but the problem was that I couldn't reach that delete button in the dashboard (or anything from the dashboard, couldn't even see it for more than 3 seconds) as the dashboard would automatically redirect me to a blank web page as soon as I opened the dashboard.
    I deleted the "plists" from the library affiliated to the dashboard (thus restoring my dashboard) and after I restarted the computer it worked.
    Thank you for the reply anyway.

  • How can I make my Flash menu SEO Friendly?

    Hi all, I have my site at http://www.sgdtechs.com and I really don't like the ugly menu I have there now and I designed a beautiful menu in flash, but I've read online that it's not SEO friendly....
    So my question is this, how can I make my menu SEO friendly? Is it even possible?
    Thanks for your answers!

    Provide an html menu for SEO purposes.  If you want to keep the Flash version, consider providing the html at the bottom of the page as text links like you will see in many sites.

Maybe you are looking for