PE 4 crashes on render, export and preview with Vista 64 bit

I just installed my PE 4 on a new Windows Vista 64 bit machine with the i7 920 processor and 512 MB ATI Radeon video card.  PE 4 worked fine on my XP machine but I cannot get it to render, export or even let me preview on this new maching.  I have followed the advise of updating all drivers and software and uninstall and reinstalling with nothing running and I get the same error repeatedly - it will render and progress for about 5 seconds and then I get "Adobe Premiere Elements.exe has stopped working" and it closes.  The video clips are from a flash memory camera and the Presets set for widescreen - flash memory.  Everything works normally until I try to view or render the files.  Any suggestions?

You say this is from a flash memory camcorder? Can  you be more specific?
Webbie camcorders, like the Flip, may shoot in hi-def, but they also record to a non-standard codec that can cause some of the problems you're describing.

Similar Messages

  • Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as two other Windows computers (one running 7 and one with Vista)?

    Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?

    Yes you can but you need to partition the drive into at least 2 separate drives.
    To do that you need to use a Windows PC to do the first partitioning. Say you split the drive into two partitions each 1TB (or close to 1TB) each.
    Partition fand format both partitions on a Win PC as one NTFS and the other FAT32.
    Then move it to the Mac and Reformat the FAT32 partition Mac Extended (Journaled) with a GUID Partition Table.
    I have that same drive and that is what I did originally with it. I now have it just for the Mac as I have other externals for the Win systems.
    Good Luck.

  • Premiere Pro CS6 Crashes on Render Timeline and also Export

    Hi, The Last few days Premiere Pro has been crashing during either export of a sequence or during render of timeline.
    This also happens if I import the timeline into AME and try to render from there.
    The Files on the timeline are 720x576 progessive @25fps Avi Type 2's
    I've tried outputting to a number of file types with the same crash. Also I have Premiere Elements on the same machine and this does the same!
    This had been working fine the past few weeks, can't understand why its stopped now.
    I've also tried uninstalling CS6 and reinstalling it. and also keep all updated..
    Also reading some other posts, i also uninstalled Itunes in case the latest update has caused problems. Unfortunately i don't have  restore point from before the problem started happening
    although i do have a backup on another drive.
    I should also mention that i've done a number of virus scans as well with a couple of products just in case of that.
    Machine is Win 7 64 bit.  I7 Quad 2600 (3.4gig), 10gb Ram, Blackmagic extreme input card, and Duo input card. The Video Card is internal to the board (Intel HD Graphics...which performs ok for what i need it for )
    any help would be appreciated to get up and running again.
    cheers
    john

    Well, I think i finally have got to the root of it...These files were recorded using Blackmagics Mjpeg Compressor, and that seems to be the problem.
    Rather than recoding the files (difficult as AME would fall over as well!) I ran them through my digital desk again (Vmix) playing them back and re recording them using AVi and the normal dv option...this time the files produced would render and output...hoorah  now see if i can finish it..will report back, but this seems to have sorted me out.

  • Xcelsius Crashes when I try and Preview

    So I have a file I have been working on for sometime, and for some reason when I try and preview now, Xcelsius just stops working and I have to shut it down. It only started happening today when I added some new content, but my real question is, what could have stopped it from working? Nothing I added in was any different that the stuff I had previously been working on. Thanks for any help, and if I need to clarify/add anything, just let me know.
    EDIT: I have taken all the new objects that I recently inserted and deleted them. I then went one by one, re-adding them and after each object hit preview. It worked until a certain point where it continued to crash again. Is it possible that the file could be too big? It's only 260kb, which to me seems like it should work fine. Here is the log:
    Problem signature:
      Problem Event Name:     APPCRASH
      Application Name:     Xcelsius.exe
      Application Version:     5.3.1.0
      Application Timestamp:     4b9cfdf0
      Fault Module Name:     Flash9e.ocx
      Fault Module Version:     9.0.115.0
      Fault Module Timestamp:     474375f3
      Exception Code:     c0000005
      Exception Offset:     0019931c
      OS Version:     6.1.7600.2.0.0.272.7
      Locale ID:     1033
      Additional Information 1:     0a9e
      Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:     0a9e
      Additional Information 4:     0a9e372d3b4ad19135b953a78882e789
    Edited by: andrewlydiard on Apr 27, 2010 1:21 AM
    Edited by: andrewlydiard on Apr 27, 2010 1:50 AM

    Hi Andrew,
    Actually it does nopen on my laptop now, I just had to be more patient :o) because it takes 3-5 mins to open the XLF...
    Open the XLF is open I can generate a SWF without issues...
    It could be to do with your memory settings for this kind of model which has quite a lot of components and individual bindings in it.
    My laptop has an Intel Core 2 Duo 2.4GHz processor with 3GB running XP SP3 with Office 2007 SP2.
    But I also have my XP Page File set to a custom size of 4094 (the most I can set) which may be why I have neough memory to generate the SWF.
    You may want to revisit your dashboard design because you have a lot of components in it which will affect the startup performance.
    Regards
    Matt
    Edited by: Matt Lloyd on Apr 28, 2010 8:44 PM

  • IPhoto is being difficult with exporting and previewing

    I recently bought my Mac Pro off of a friend. He still had it under his name, and I changed it to my name under system preferences. I think it messed up the uploading, exporting, importing, and viewing of my pictures. I can upload them to the computer fine, but when I go to export or view them in iPhoto, all I get is a black screen. Exporting, and it tells me unable to create "users/(friends name)/documents/" Any help would be appreciated and I don't want to lose my pictures. I've already tried to rebuild the library with iPhoto Manager and with iPhoto itself. Thanks for the help!

    JMHeck wrote:
    it tells me unable to create "users/(friends name)/documents/"
    It's a question of what exactly you did when you "changed it to my name under system preferences".
    This is not exactly what you're looking for, but, IMHO, the best thing to do is to back up your photos (make sure they are the photos—double-clicking on one of them should open Preview) and anything else you want to keep to an external hard drive; then start up from the Install DVD, erase the internal disk (this destroys all data on the disk), re-install the OS from scratch, re-install your apps from the original installers, and restore your photos and docs.
    This way, you start with a clean slate, which is what you want to do with a used computer (Mac or Win doesn't matter).

  • FCP Crash when opening log and transfer with some AVCHD footage on a card

    Hi,
    I'm using a freshly (re)installed version of FCP 7 on a brand new macbookpro loaded with 8gb ram and equipped with a small 2ghz Intel Core i7
    I get footage shot on Panasonic ag-hmr10 minicams coming on SD cards as AVCHD footage. Sometimes the files are quite big, 17gb of compressed footage.
    When I go to log and transfer, to convert the footage in apple prores, the l/t window opens, I see a preview of my footage, than the spinning beach ball of death shows up and FCP crashes every time. I've tried deleting the preferences and reinstalling the software. Still, it keeps crashing. Now the same file on a different computer equipped with FCP will be processed, slowly but surely.
    Now I know I can work around this problem by going to toast as an encoder, but I want to fix this issue so I can operate from FCP. I've seen this problem posted before but never found any good solution.
    Any suggestions?

    Have you tried setting the L&T AVCHD audio conversion prefs to plain stereo?
    Open the L&T window.
    Click on the gear icon towards the upper center of the frame.
    Select "Plain Stereo" For the AVCHD plugin.
    MtD

  • Help:Canadian Export and Import with GTS

    Hi all,
    Could you please explain as to how GTS is used in Canadian exports and imports. Is AES also used in Canada for export filing and how GTS is used in import process ie for import declarations in canada?
    Any help would greatly be appreciated.
    Thanks,
    Shruthi

    Since customs has not been certified for Canada can GTS be used for Compliance Management for Canada? If yes what legal regulations are to be used?
    Thanks,
    Shruthi
    Edited by: shruthi on May 19, 2009 9:24 PM

  • Loss of Export and Share with 7.1.3

    On a G4 PowerBook FW800, I've updated to QuickTime 7.1.3.
    The Export and Share items are now gone. This is QuickTime Pro and that is still rewcognized under Registration.
    Any similiar experiences? Any solutions other than trying to downgrade?

    My guess would be that a firewall or some other privacy filter or possibly antivirus or antispyware utility is blocking the ability of QuickTime Player to connect to Apple's server. Many such utilities and filters will erroneously consider an upgrade to an application as a new installation and so have to be reset to allow the connection again, so you may need to go into the settings of any such firewall/filter/utility and reallow QuickTime Player's connections.
    Hope this helps.

  • How to sync with vista 64 bit windows calendar and windows contacts

    Hi all,
    I see the clear msg on the Palm site saying that 64 bit windows is not supported, but that is still my need and my goal.  I just bought a new DELL desktop and am transitioning to it, but this is a showstopper.
    I want to ask if any user has suggestions or if anyone has insight as to if/when palm will sppt it.  Today its hard to buy a machine in a retail store that is not loaded w Vista64...and I spoke to Dell about this, since they need to warn people that the OS may prohibit a person from replacing his old Dell with a new one, but they say its a Palm/Msft problem. 
    My Tungsten E2 is important to me, and I want to sync it daily.  I am not very sophisticated when it comes to PC's or the OS's although i have learned a lot in the past 3 days.  I have no room to keep 2 machines, nor desire.  Any suggestions besides 'let the buyer beware'?
    Signed,
    Feeling Duped
    Post relates to: Tungsten E2

    I've been a Palm user for only 1 Year now and am not impressed.  Sure the 755P was a flashy device with cool features.  However, now after owning the device for a short period I'm looking for updates from Palm which don't exist.  The browser in antiquated and doesn't support recent technology.  The email system is effective, however, hope you don't receive an HTML email because you can't read it in Versamail.  Palm is focused on trying to produce new devices which compete with the IPhone and Storm but aren't remembering that their loyal customers will continue to purchase devices from them if they keep them happy. Futher, after upgrading my wife's laptop to Vista 64-bit I find that we can no longer sync the device using the interface cable. 
    My advice at this time, is to stay away from Palm until they provide the service which customers have come to expect.  I note today 12/7/08 that Palm is selling at $1.42 a share when just 8 years ago Palm stock was selling for $472.50.  Don't you see the picture, people are interested in the new flashy devices, but, if you don't take care of your customer base which has been loyal they will jump ship and move on to the better technology which works. 
    How about providing the updates we need to work today.  It will help me make up my mind next year when this 2-yr contract with Alltel is up (and i become a new Verizon) customer.
    The matter is all in Palm's hands.  I don't see this company surviving past 2010 unless they start taking care of people now.  My advice, stay away from Palm until they fix all these issues which people have identified throughout the web.
    Post relates to: Treo 700p (Verizon)

  • Windows Mobile and syncing with Vista

    I just recently bought a new laptop (within the last week) with Vista as the operating system.  I also use Outlook 2007.  When I hook my phone up by the usb cable sometimes the computer acknowledges my phone and sometimes not.  However, when it does acknowledge it, it does not give me the option to set it up, only an option to sync music, photos and tv.  All I want to do is to sync to Outlook. 
    You can probably tell from my message that I am not very tech savvy but if someone can tell me what to do I can do it!  I have read the help menu in Vista backward and forward but still have no idea how to get my phone to sync.  Someone please help me before I lose my mind!  Is there anything that I have to download to be able to sync?  I realize that activesync no longer is needed on Vista but I am unable to tell whether I have to download the Windows Mobility Device Center or if it is already in Vista.  I cannot find anything that looks like the WMDC is supposed to look like on my computer and like I said, I am not offered the option of setting up my device. 
    HELP!!!!!!!!!!!!!!!!!!!!
    Post relates to: Treo 700wx (Alltel)

    Ok one way to make sure and see if WMDC is install is to go into your control panel and open the programs and features. And look for the windows mobile device center. If it is listed then it is installed if not (which I think is the case) then you would need to go to here to install it http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
    once installed you should get the setup option.
    Let me know if any of this does not work
    Post relates to: Palm Z22

  • Regarding a WRT54G: Firmware and trouble with Vista

    Hey all,
    First of all, this is my first post here on this board so please don't have me assassinated if I skipped some board rules/policy. I'm trying to find a solution to my problem a.s.a.p.
    My first question is: what's up with the firmware versions and my router's modelname? When I bought the router I got it in a box saying WRT54G (v1.1) with firmware version 4.30.7. As a first step getting the problem described below solved, I downloaded the latest Linksys  firmware for a WRT54G v1.1 from this website. After the firmware update my router now seems to be known as a WRT54GL and next to that my firmware version number didn't increase, it deacreased to 4.21.1. I don't know about you guys but this doesn't seem logical to me. Any explanations? Also the firmware's date seems to be somewhere back in 2006, isn't this a bit outdated for 'latest' software?
    Now onto the next subject: the fact that my Acer notebook keeps losing the wireless signal since Vista. The wireless connection between the router and my notebook has always worked very fast and flawlessly when I ran XP SP2. However, as soon as I install Vista, something odd happens. With the same drivers for my wireless chipset (they're for both XP and Vista) either my notebook keeps losing the wireless signal or the router has trouble providing my Vista notebook with a steady signal. For 30 to 45 minutes I seem to have a steady signal with 5 blocks filled on Windows' signal'O'meter and then suddenly I get disconnected from my router for like 10 seconds to 1 minute. At first it says my connection turned from "local and internet" to "local only" and after a few seconds the entire signal is dead and the wireless tray icon gets covered by that little yellow triangle. Without interfering it'll take up to a minute at most and the connection will be back as it was before. However, this minute is just enough to mess up skype sessions, downloads, streams, you name it. To be honest, I haven't got the faintest idea what might cause this. Does anyone of you have?
    N.b.
    - I think I've noticed the issue occuring more frequent during high bandwidth usage like downloading with 2.5 to 3 MB/s but I'm not very sure about that.
    - My notebook hasn't moved an inch over the past years and there are no other devices added in my house that might interfere with the signal.
    - I've tried all the eleven channels.
    - I've set up a dualboot system on my notebook with XP SP2 and guess what, problem is gone when I use XP SP2 again.
    - I'm using an Atheros AR500G wireless adapter.
    - I'm only using Acer's drivers for the wireless adapter, not their useless resources consuming utility that "manages my wireless settings". Which seem to be Acer's words for slowing sh1t down a lot!
    - I'm using exactly the same internet security software with Vista as with XP SP2. Turning this software off won't help in any way.
    Any help is much appreciated!
    Thanks in advance,
    G.
    Message Edited by Guilio on 11-20-2009 04:11 PM

    peanuts wrote:
    First thing which you can check is the Model number of your Router. Flip the router upside down and below you will find the Model number of your Router and version number. Make sure it is WRT54G or WRT54GL. As you have mentioned that previously the firmware on your Router was 4.30.7, Basically that's the Firmware version of WRT54GL Router.
    Since you have already upgraded the firmware on your Router, Have you resetted your Router and re-configured all the settings back on your Router? If not then you can do it now. 
    While Configuring the settings on your Router you need to change the Wireless Channel to 11. 
    Now you can try to connect to your Wireless Network and check if you are able to go Online. 
    The model on the router itself says WRT54G.
    I've already resetted and reconfigured the router several times, doesn't help. Also tried all the 11 channels.
    And yes, I am able to go online but the problem described in my first post still exists. I don't see why switching channels would solve it anyway since it's clearly a problem caused by the router in combination with Vista, it's not signal strength related. But like I said, I tried all the channels anyway.
    Is it possible for a Linksys employee to take a look at this topic? Are there some known issues with a WRT54G and Vista and/or an Atheros AR5005G chipset? Is my hardware and software supported by the WRT54G at all?

  • IPhoto keeps crashing when I 'export' and MacBook Pro SO slow

    Hi - two questions but I think the second is the biggie!! I've looked at the forums and exported my data from my Macbook. Can anyone take a look and tell me why my MacBook Pro is so ridiculously slow? Is there anything wierd on the below?
    Secondly, I haven't been able to export any photos from iPhoto for about a month as it crashes every time.
    Hardware Information:
              MacBook Pro (13-inch, Mid 2009)
              MacBook Pro - model: MacBookPro5,5
              1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:6:25
    Disk Information:
              TOSHIBA MK3255GSXF disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 319.21 GB (135.88 GB free)
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              [not loaded] com.Huawei.driver.HuaweiDataCardDriver (4.0.6) Support
              [not loaded] com.markspace.iokit.IOMissingSyncMassStorage (140) Support
              [not loaded] com.markspace.missingsync.palmos.classicseize (1) Support
              [not loaded] com.novatel.driver.Merlin (1.7) Support
              [not loaded] com.novatel.driver.MerlinData (1.7) Support
              [not loaded] com.novatelwireless.driver.3G (2.1) Support
              [not loaded] com.novatelwireless.driver.3GData (2.1) Support
              [not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) Support
              [not loaded] de.novamedia.oem.sierrawireless (1.0.4) Support
    Startup Items:
              HWNetMgr: Path: /Library/StartupItems/HWNetMgr
              HWPortDetect: Path: /Library/StartupItems/HWPortDetect
              MissingSyncMounting: Path: /Library/StartupItems/MissingSyncMounting
              ProTec6: Path: /Library/StartupItems/ProTec6
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.cocoatech.pathfinder.SMFHelper.plist Support
              [running] com.sophos.autoupdate.plist Support
              [running] com.sophos.intercheck.plist Support
              [running] com.sophos.notification.plist Support
              [failed] com.vmware.launchd.vmware.plist Support
    Launch Agents:
              [running] com.brother.LOGINserver.plist Support
              [running] com.sophos.uiserver.plist Support
              [failed] de.novamedia.NML2NDeviceObserver.plist Support
    User Launch Agents:
              [not loaded] com.adobe.ARM.[...].plist Support
              [not loaded] com.google.keystone.agent.plist Support
              [not loaded] org.musingsfrommars.vacuumMail.plist Support
    User Login Items:
              smcFanControl
              iTunesHelper
              Missing Sync Monitor
              Dropbox
    Internet Plug-ins:
              Google Earth Web Plug-in: Version: 6.1 Support
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
              CouponPrinter-FireFox: Version: Version 1.0.11X
              OfficeLiveBrowserPlugin: Version: 12.3.2 Support
              RealPlayer Plugin: Version: (null) Support
              FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
              DivXBrowserPlugin: Version: 1.3 Support
              Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
              iPhotoPhotocast: Version: 7.0
              Aspera Web: Version: (null) Support
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewer: Version: 9.5.5 Support
              GarminGpsControl: Version: 2.9.1.0 Release Support
              ContentUploaderPlugin: Version: 1.2 Support
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
              MissingSyncPalmiTunesPlugin: Version: 5.1.2 Support
    User Internet Plug-ins:
              fbplugin_1_0_1: Version: (null) Support
              WebEx: Version: 1.0 Support
    3rd Party Preference Panes:
              DivX  Support
              Flash Player  Support
              Flip4Mac WMV  Support
              Growl  Support
    Time Machine:
              Auto backup: YES
              Time Machine not configured!
    Top Processes by CPU:
                   9%          Google Chrome
                   7%          Microsoft PowerPoint
                   6%          InterCheck
                   2%          WindowServer
                   2%          opendirectoryd
    Top Processes by Memory:
              146 MB          InterCheck
              127 MB          com.apple.IconServicesAgent
              97 MB          Microsoft PowerPoint
              78 MB          Dropbox
              75 MB          Google Chrome
    Virtual Memory Information:
              947 MB          Free RAM
              1.29 GB          Active RAM
              1.12 GB          Inactive RAM
              429 MB          Wired RAM
              301 MB          Page-ins
              0 B          Page-outs

    Sarah,
    There's a lot of Sophos antivirus stuff actually running at the time of your report. If you take reasonable care and don't download pirated apps, you really don't need antivirus software on a Mac. It pretty much just slows the system down. If you decide to get rid of it, use the developer's uninstall, don't just trash it.
    http://www.sophos.com/en-us/support/knowledgebase/119182.aspx

  • Lightroom crashes when rendering Develop preview under Vista 64-bit

    I'm running Windows Vista Ultimate 64-bit and Lightroom 1.1 crashes every time I click the "Develop" pane. My images are DNG files without the original RAW embedded.
    Lightroom ONLY crashes when I load an image in Develop. If I open Develop without any image selected, it's fine (no image is displayed). I can zoom in to 100% in Library and it works fine. Exporting images to JPG works fine. Editing photos in the Library pane is fine. The crash data is:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: lightroom.exe
    Application Version: 1.1.0.0
    Application Timestamp: 4677e8e1
    Fault Module Name: MFC80U.DLL
    Fault Module Version: 8.0.50727.163
    Fault Module Timestamp: 4484afec
    Exception Code: c0000005
    Exception Offset: 0002511c
    OS Version: 6.0.6000.2.0.0.256.1
    Locale ID: 1033
    I've uninstalled LR 1.1 and reinstalled and it does the same thing. When I uninstall LR 1.1 and the install LR 1.0 (the previous version) Develop does open, but it doesn't render the images correctly - it looks like it misinterprets the white balance by about 1,500k degrees (very ugly), but Library shows the correct image/white-balance.
    I've updated my nVidia 7900 graphics drivers to the latest version, appropriate to my OS and architecture. I've disabled XMP creation and Adobe Photo Downloader, as well as all other running applications (Antivirus, spyware, itunes, etc).
    This USED to work fine in Vista and I did not make any significant changes, but I expect it's an issue with WindowsUpdate causing an incompatibility. I can't roll-back to my Vista state when it worked a month ago (that's another Vista frustration).
    Anyway advice or comments would be GREATLY appreciated since this is an integral part of my professional workflow. I own a legitimate, licensed copy of both Lightroom and Vista, yet neither company is willing to talk to me unless I pay them money, which I think is complete extortion, but I digress.
    Thanks in advance for your help.

    Has anyone got a resolution on this? I have the same issue. Lightroom crashes when I click develop and the develop module begins to render the image. Clicking develop with no image selected allows the develop module to load however selecting develop on the menu bar and choosing either previous photo or next photo causes lightroom to crash while rendering an image.
    I have a 64 bit capable HP XW8400 workstation with 2 dual core Xeon processors, 4 GB RAM, and a nVidia FX 4400 graphics card. This video card was put in as a test. the original video card was an nVidia quadra NVS something. When I ran the NVS card I used the drivers certified for Adobe CS2. I am running 32 bit Windows XP SP2 with all current updates. I do not have any MS office components installed on this system.
    I read of some troubles around the Realtek HD audio driver and some Adobe applications (not Lightroom). Since I have this sound device I disabled it and removed the drivers...still crashes.
    I also disabled the Intel VT in the system bios (I believe this is required to run 64 bit XP or Vista)... no change. Also disabled the NX feature...no change.
    I also loaded VMware workstation 6.0 and installed Lightroom in a 32bit Windows XP SP2 VM. In the VM Lightroom works perfectly on the same machine...just not as snappy...
    This stinks...Lightroom works perfectly on my poky laptop.

  • APPCC crashes on queue export to AME with AE comp links

    I am experiencing crashes every time I try to export sequences to the AME queue that contain after effects composition links. It does not seem to make any difference if the sequences are rendered or not.
    i7
    GTX770
    16gb RAM
    1TB/500G SSDs
    APPCC 2014.2

    The format I had tried are H.264. In the AME preview its black too. How do you do a reinstall of After Effects CC? Will that affect my trial?
    Go to the Applications/Adobe After Effects CC folder and double-click on the Uninstall Adobe After Effects CC shortcut. Reinstalling should not have an affect on your trial period, as long as you remain signed in to Creative Cloud on that computer.
    Before doing that, though, please post a screenshot of 1) your AE comp, 2) the AME queue with that comp loaded, and 3) the Export Settings dialog for that comp.
    You should also try resetting the preferences for both AE and AME. The top of this page has instructions for AE; I recommend deleting the files manually instead of using the keyboard shortcuts. AME's preferences files are in a similar location. Mind that the user Library folder is hidden on recent versions of Mac OS.  (After Effects CC is version 12.0, and AME CC is version 7.0.)
    Another question is since I have CS6 and CC programs can I remove CS6 AME and streamline everything into AME CC? Since its a duplication of programs taking up disk space.
    In order to properly remove AME CS6 you would need to remove all CS6 applications that reference it (in your case, Flash Pro CS6 and Premiere Pro CS6). Please note that you should always use the uninstaller applications; don't try to throw the applications in the trash, which will cause problems if you later need to reinstall.

  • Export and Import with different environments

    Gurus,
    Thanks for spending your time to read this thread. I have a table with say 100 rows in development area. I need only 10 rows to be moved to Quality. For example, user/pwd@D1 is the user login detail during export.
    user/pwd@F1 should be the login for Import.
    Is that possible?
    Here D1 and F1 are tow different Oracle databases altogether. The table definitions in both the databases are same. And for your information, the schema names are same in bothe the dabatases (user).
    Please help me.
    Thanks in advance
    DRK

    Gurus,
    Thanks for spending your time to read this
    thread. I have a table with say 100 rows in
    development area. I need only 10 rows to be moved to
    Quality. For example, user/pwd@D1 is the user login
    detail during export.
    user/pwd@F1 should be the login for Import.
    Is that possible?
    Here D1 and F1 are tow different Oracle databases
    altogether. The table definitions in both the
    databases are same. And for your information, the
    schema names are same in bothe the dabatases (user).
    Please help me.
    Thanks in advance
    DRK10 rows to be moved to Quality which 10 rows,why import export why not db link
    you can use db link to move across data within diffrent database.db link gives you
    specific visibility one database objects to anothre database object.
    Khurram

Maybe you are looking for

  • How do i seperate 2 iphones from using the same itunes account?

    Recently moved from aus to nz, sold my other phone and now have a new phone in nz, hooked it up to my itunes to set it all up and get old info. Now ive changed it to new nz number and removed old number from itunes acct, updated billing and email on

  • No longer turned on, then mysteriously it did! Any ideas why??

    So one day my MBP was working fine, it had about 70% charge left. I closed the lid and went upstairs, opened the lid again and it didn't come back on. I tried the power button, still nothing. There was no backlight on the screen, no sounds, nothing.

  • My itunes crashes when I want to sync my iPhone

    I just restored my iPhone and it hasn't fully loaded iOS 7, so it dosen`t work, but always when I try to connect it to my itunes (what it says I should do) my iTunes crashes, so I can't/won't be able to use it, because it has just been restored and t

  • Use of % for wildcard matching in cursor

    i can use the wildcard character('%') in a statement something like this :- where city like nvl(cit,'%') in which if the null value is encountered in the variable 'cit', then city could be anything. Now, my question is can i use this wildcard charact

  • Unable to share doc to sharepoint group

    Hi - I have users with read permissions that are able to share documents with users but somehow are not able to share the same documents with sharepoint groups. Has anyone come across this or know how to resolve this?