PE 5.0.2 - Could not load the FastCore Routines module because the file could not be found.

The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.

CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
           MULTIPROCESSOR SUPPORT NOT FOUND
          SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings  
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
                                  Ken

Similar Messages

  • How do I fix my photosop when is says that it could not load FastCore Routines module because the file was not found?

    Every time I try to turn on Photoshop a pop up shows up and says "Could not load the FastCore Routines module because the file was not found." How do I fix this?@

    Here is a solution for an older version of Photoshop with a slightly different message, but it might be the same reason—trying to use older PS plug-ins with a newer version of PS:
    http://helpx.adobe.com/photoshop/kb/error-could-load-fastcore-multiprocessor.html

  • CS6 photoshop message 'could not load the fast core routines module because the file was not found'

    my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it.  my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.

    I did a search on my system and found the Photoshop has a fastcore plug-in.  Creative Cloud includes a subscription version of CS6 version 13.1.2.   I do not know if you installed that or not.  The cc un-install may have done something.  You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop  CS6 version 13.0.6 Mac or Photoshop  CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2.  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6   If you need to download the CS6 installer Download CS6 products.
    You may also be able to recover your cs6 using an old system backup
    fastcore.8bx on my system...

  • Extension is not loaded. Cannot complete command because the extension could not be loaded.

    Despite display and hook into the extension manager CC Erweireung in PS is displayed to, but is not loaded.
    Advance: Even reboot didn't help.

    I unstalled Photoshop.  Then I installed on another drive.  External.  It did the same thing!!!!  No mini-bridge, or any extentions loading.  I don't know what is wrong.
    I read something somewhere about a Panels file in photoshop.  So I'm looking there.

  • Could not load the mmxcore routines module because it does not work with this version of photoshop?

    I'm getting the above message when starting Photoshop CC 2014. Click OK & it loads fine but just a little annoying. Seems to have happened since the Aug 5 update. Photoshop shows as version 14.0.0 release although CC App shows it as up to date. Should it not be version 14.1 ?

    According to Adobe - see here: Adobe Photoshop CC new features | Buy Photoshop CC   'Photoshop CC 14.2' was released on Jan 15th 2014 but the latest version released on 5 August 2014 is 'Photoshop CC (2014.1)'
    As far as I'm aware, after 14.2 , releases were name '2014 release' so the 2014.1 release is indeed the latest version - there have been two updates since 14.2.1
    However, this still doesn't explain why mine has shows as 14.0.0 and 'up to date'  Anyone know how I can get it to update to the latest version??

  • Could not load FastCore Routines modules error

    I am using Adobe Photoshop Elements 5.0 and I have recently started getting a message saying "Could not load the FastCore Routines module because the file could not be found". How do I fix this?

    This link relates to Creative Suite but may help:
    http://helpx.adobe.com/photoshop/kb/error-could-load-fastcore-multiprocessor.html
    Have you updated to v5.0.2
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569

  • Could not load the Multiprocessor Support module because it wont work with

    Here is a strange error message, there are actually 2.
    But they arent making PSE 8 unusable, just very annoying.
    Here is the first one,,,,,,,,,
    "Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
    When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
    My new Mac has 2 processors? Could that be what the message is saying?
    But when I click the error message away, PSE 8 works fine.
    There is another one too,
    "Could not load the FastCore Routines module because it doest not work with this version of photoshop."
    I just click it away and no problem, just a pita.
    So if they dont effect it, I shouldnt worry, but my classmates are concerned.
    Do you here have any idea what it is, and how to get rid of it?
    There is info on the web about it, but no solutions.
    Thank you,
    Jane

    This is interessting, as does my new Mac have 2 processors or 2 cores?  I havent come across how this works yet, nor how to find it on my Mac.
    Yes, I just found a site which explains it well,
    http://macperformanceguide.com/Optimizing-Cores.html
    I have one processor with 2 cores.
    And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
    You sure explained this well!   I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
    http://kb2.adobe.com/cps/407/kb407809.html
    Is what Adobe tells us, this is for Windows, but it could apply to Macs?
    I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before.  Thats confusing, as I would have thought it would have shown up right from the start.
    I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
    This will be fun to see what the real answer is!  As I find out more, I will add it here.
    Thank you,
    Jane

  • On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

    Need help-
    On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

    Thank you station_two but I did install them in my
    applications>adobe>presets>brushes and still I get this error message......
    On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

  • When attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?

    when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?

    I did a search on my system and found the Photoshop has a fastcore plug-in.  Creative Cloud includes a subscription version of CS6 version 13.1.2.   I do not know if you installed that or not.  The cc un-install may have done something.  You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop  CS6 version 13.0.6 Mac or Photoshop  CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2.  Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6   If you need to download the CS6 installer Download CS6 products.
    You may also be able to recover your cs6 using an old system backup
    fastcore.8bx on my system...

  • Unable to load the package as XML because of package does not have a valid XML format

    I have SSIS package and I would like to let SQL Server Agent Job to run it.
    However I get Unable to load the package as XML because of package does not have a valid XML format
    What could be wrong?
    Kenny_I

    Hi Kenny,
    What's the version of your SSIS? Please refer to the following methods to solve this issue:
    Hard code the path of SQL Server 2008's DTEXEC while calling the SSIS package as shown below:
    C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC.exe /F "D:\MyFolder\MyPackage.dtsx"
    Rename the old exe in the 2005 path to a different name (Example:- C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTEXEC_Old.exe)
    Go to PATH environmental variable and edit it in such a way that "C:\Program Files\Microsoft SQL Server\100\DTS\Binn" path appears well before the "C:\Program Files\Microsoft SQL Server\90\DTS\Binn" path.
    For more detail information, please refer to the blog below:
    Failed to open package file due to error 0x80070020. The process cannot access the file because it is being used by another process. This happens when loading a package and the file cannot be opened or loaded correctly into the XML document:
    http://blogs.msdn.com/b/ramoji/archive/2009/08/28/failed-to-open-package-file-due-to-error-0x80070020-the-process-cannot-access-the-file-because-it-is-being-used-by-another-process-this-happens-when-loading-a-package-and-the-file-cannot-be-opened-or-loaded-correctly-into-the.aspx
    A similar thread about this topic for your reference:
    http://social.technet.microsoft.com/Forums/en-US/b2987df5-8c9b-4797-bdce-b9ec308731f6/i-am-getting-error-when-running-ssis-package-using-sql-server-agent-error-description-is-unable-to?forum=sqlintegrationservices
    If you have any feedback on our support, please click
    here.
    Elvis Long
    TechNet Community Support

  • The song could not be used because original file could not be found

    I just loaded iTunes on my new laptop running Windows 8. I then synced my iPod Nano hoping existing songs would be imported. Songs seemed to come across but when I try to play on my computer I get message - "The song could not be used because original file could not be found." Can anybody help?

     
    Solution may be found if you search in the "More Like This" section over in the right column. 

  • How can i fix this for my iPhone4? "attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to. "

    i keep gettign this message when trying to drag music in itunes.
    attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to.

    Can apply to iPhone as well >    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    If you are using a Windows based computer >  iTunes for Windows: Gathering and using iTunes Diagnostics
    Ignore:  To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.

  • "iTunes could not back up the iPhone 'my IPhone' because a session could not be started with the iPhone"

    Since 2 updates I started getting iTunes could not back up the iPhone 'my IPhone' because a session could not be started with the iPhone. This is happening with my iPad and iPhone. I see hundreds of complains on this issue starting from last year and obviously Apple has no clue how to solve this error. I went through the solutions and spend over an hour deleting backups resetting lockdown, restarting and nothing is working. Are they serious to ask us to disconnect all other USB devices to sync our equipment everyday to solve their problem? iTunes is the worst program I have seen on the market in the past 10 years. It reminds me of DOS programs that could only do one item at a time. You click a command and just wait and wait and wait. Of course they want me to call customer service, wait for x time to talk to tech support and then spend more time. I don't have the time. I spent a lot of money to get an equipment that should work as advertised and not spend further my valuable time. I have reached my limit with Apple and that crap iTunes. I'm calling for a divorce.
    [By the way, your spell check doesn't recognize your own products such as iPad, iTunes and iPhone. Such an embarrassing company.]

    Do you happen to be running any processes that Apple doesn't want you to use? (Jailbroken?)

  • Video rendering : Could not complete the Render Video command because the settings in the file are invalid. What is this?

    not sure how to get past this?

    0s x 10.9.5
    2.9Ghz Intel Core i7
    16gb ram
    Intel HD Graphics 4000 1024 MB graphics
    Adobe CC 2014
    When I was half way through exporting it. That message came up.
    Could not complete the Render Video command because the settings in the file are invalid.

  • When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

    When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
    I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
    WGC

    What's the name of the file you are attempting to open?  Is it "ScreenFlow_4.5.2.dmg"?  If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension.  Adobe Reader opens PDF files an not any other file type.

Maybe you are looking for

  • Table of Contents In Hyperion Reports

    <BR>Hi,<BR><BR>I setup a Hyperion Report with location used for pages. When I print report, I get the expected result of each page being a location I specified, and in the order I specified. I'd like to distribute same report as pdf, but incorporate

  • Not working across managed code - PDPageDrawContentsToWindow - HDC

    PageDLL - a Com Dll contains the following: struct GRect_tag     long lLeft;     long lBottom;     long lTop;     long lRight;     }  GRect; BOOL CMyDrawMC::SetDrawPageToWindow(int hdc, GRect WinRect) PDDoc objPDDoc; PDPage objPDPage; objPDDoc = PDDo

  • Comp value in BEx

    Hi All. I have one InfoObject called  performance org.it has one compounding business area. when i am taking performance org in my query it in query display it is also displaying its compounding value.user don't like to see the compounding  value. ho

  • ADF Bc third party JDBC Driver java.sql.SQLException: No suitable driver

    Hello all I am using JT400.jar file to connect to AS/400 data base in my JSF/ADF Application. We are using shared library for all non oracle jar files . and my application fails with error message ## Detail 0 ## java.sql.SQLException: No suitable dri

  • [ERROR] Model binding context not initialized

    Hello, I made a adf webapp with JDEV 10.1.2. I deployed my webapp on tomcat 4. It all work fine. Then i tried to call it as a portlet from a portal (JAHIA www.jahia.net). I got the following error in tomcat : Model binding context not initialized. I