PE 5.0 Batch Processing for dust removal add on

I have PE Elements 5 and have scanned about 6000 slides (whew!) into my system. I have been using a dust removal add in provided by the scanner manufacturer (Konica Minolta DiMage Scan Dual IV) which has a slightly better capability than the caned one provided by Adobe. I would like to be able to batch process the slides for dust removal. Is this possible?

1. Is above possible at all?
Simple answer, No.
2. Does anyone know how to perform either of the 'Remove an Add-On' and/or 'Downgrade an Add-On'?
As far as I know is not possible... you'll have to restore from backup.
Regards
Juan

Similar Messages

Batch Processing for Workitem - Result Processing

Hi All,
I'm having problem in a workflow step.
When the workflow step is execuetd i'm getting a step log as:
Batch Processing for Workitem     Dialog work item created          14.05.2009 09:09:59
user01                    Execution started               18.05.2009 05:57:18
user01                    Work Item Processing Complete     18.05.2009 06:04:46 Functionality for Hi 000600113419
user01                    Terminating event received          18.05.2009 06:04:46 Functionality for Hi 000600113419
Batch Processing for Workitem     Result Processing               18.05.2009 06:04:46
Can any one please let me know what code/program is executed in *Result Processing *

I read this in the documentation:
If necessary, the G/L account can also be set so that the tax code is not a required entry when posting transactions not relevant to tax
How would I set this?? Or where is it done?

How can I set the number of batch process for DTP globally?

Hi guys,
How can I set the number of batch process for DTP in system globally?
For eg. set the number to 1
Any hint is appriciated!
Regards,
Liying

Hi,
In DTP screen also you can view batch settings. Check the Settings menu, you will find Batch.
Reg
Pra

Batch processing for Enabling Usage Rights for Reader

Hello,
We have a lot of documents that we are converting to fillable pdfs using Acorbat 9 which will then be sent out via email to be filled by users. Since there are 50-100 different files, is there a way to use Batch Processing to enable usage rights to Reader for all those documents? Any help or advice is appreciated.
Thank you,
Sam

There's no way with Acrobat. You can with Adobe's LiveCycle Reader Extensions product, but it's likely not worth it for just this.
George

Batch process for setting document (language) and page (structure) properties

I'm looking for a batch process or script that will take a folder of PDFs and add some basic properties required by Section 508 (for accessibility) automagically--such as Document Properties where language=EnglishUS, and Page Properties Tab Order=Use Document Structure.
I'm not a programmer so any help is very much appreciated.
Thank you!
Mary

well on unix/Linux/solaris there are no drives but storage heirarchy starts with a root directory represented with ' / '. and all files and directories are created in root directoy like
/usr/local/bin
/export/home/san
etc
also filesystem of unix consists iNodes rathar than FAT entries as in case of Windows.
some basic information is available at
http://www.techonthenet.com/unix/index.php
Regards

Batch process for Web & Devices possible??

Hiya,
Here's what I have going on. I'm heavily involved with the DAZ3D community. Over a year ago I create a huge and I mean huge texture pack for the Windy Wizard Robe and the Morphing Fantasy Robe found at Renderosity. The pack, when zipped up is a whopping 333 Mb's. I was hoping to get that file size cut in half. I would do it one at a time but heck there are 151 texture maps in the pack. That's really not seeming like something I want to do if I can avoid it.
Is there a way to batch process using the Save for Web & Devices command?? It's settings are already set up to where I like them as I've completed a couple more packs and exported using that. It complains since the size of the texture maps are usually around 3000 X 3000 but it still works perfectly and it really does cut the size, actually, by about 2/3rds! Crazy but I really can't tell the difference when I compare a regularly saved map with one that's exported using that command. It's pretty amazing.
Thanks for the help!
Richard ;-)~

Quality level is just the degree of compression. 12 is max quality (minimum compression). Depending on how media is viewed one might not tell the difference between level 10 and 5. Save for web uses the same dialog.
This also is same dialog you get if you "save as" in jpeg. Try a couple of different levels and see what the results are, and what satisfies your needs.

Batch Process For HDR Time Lapse?

Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects). Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same. In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
Any ideas?
Thanks.

Cecilstar wrote:
Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects).
No reason I know this can't be done. Lift and stamp adjustment.
Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same.
Aperture→Prefs→Advanced→{uncheck "Create new versions when making adjustments"}.
In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
What's the subject? I'd like to see the film.
Any ideas?
Thanks.

Batch Processing for ACCRUAL documents

Hi All,
I am running into this error when processing a batch session for accruals t-code FBS1, it works fine for most accounts however this particular account stops the processing with an error.
G/L account 125010 requires a valid tax code
what can I check or fix that would be different about this account?

I read this in the documentation:
If necessary, the G/L account can also be set so that the tax code is not a required entry when posting transactions not relevant to tax
How would I set this?? Or where is it done?

Batch processing for f4vpp

Is it possible? Whenever I try f4vpp -i *.* or *.f4v, it returns an error that it can't find the file. It's a real pain manually converting any large number of files.

This command should batch process all of the .F4V files in your current directory:
for %i in (*.f4v) do f4vpp -v -i %~ni.f4v -o %~ni.mp4

Batch Process for "Enable for commenting in Acrobat 9 pro/Acrobat 8.0 Professional

We had set up a process that every generated PDF through distiller should have "comments enabled" PDF. We have many PDF like this.
Now I'm doing one by one. We just wanted the same to be in Batch Mode.
I just wanted to know that how to do by using "Batch Processing". Much appreciated if any help me out to do this successfully through Acrobat Javascript.

If you are using an Apple computer you can download an Automator service script that I made. It will enable you to select as many, or as few PDFs as you would like to enable comenting in and will automatically enable each PDF to "enable commenting". You can view the tutorial and download the Automator Script here:
http://www.youtube.com/watch?v=azRq6vRSVbs
Hope this helps.

Batch Process for creating button sets in Fireworks - help

Hi,
I'm new to Fireworks still, I've created some really simple
buttons and I was wondering if it's possible to do a batch process
on them to repeat a few steps e.g. changing background colour,
border colour, text colour etc... It would save me lots of time and
I could make some extra sets then.
Thanks,
Rob

Actually Find and Replace will go through a directory as
well.
alex
PJR wrote:
> "sanchothefat" <[email protected]>
wrote in message
> news:ee8qm0$1pm$[email protected]..
> | Thanks Peter!
> |
> | You're a real hero, nice one
>
> Not sure about that! I'm struggling with this.
>
> I would set about this in a different fashion
>
> I would open a canvas say 600x600 and import all your
buttons onto the
> canvas.
> Organize them in a way that makes sense to you. You can
duplicate each set
> and alter the colours in several ways. In my example
>
http://www.fasterthanu.com/rob.html
I used Adjust Colour > Levels with just
> the backgrounds selected.
>
> Sorry I couldn't be more help
>
> Peter
>
>

How should a batch process for text alignment be configured in PDF

Hi,
Using Adobe Photoshop CS5 extended, how can I configure a batch process to align the text on about 700 single page pdfs (of text)? The text consists of four tables of numbers and one page number per page.
Thanks.

Thanks. I didn't think so.
I thought it was a Photoshop question (since I know how to do it one page at a time manually in Photoshop) and I did post the question in the Photoshop Forum. Apparently it's not possible to batch the process in Photoshop, so someone moved the question to the Acrobat Forum.

Batch Processing for reduced size

I want to take a number of PDF files and try to reduce their file size. Is there a way to do this in Batch Processing? I really don't want to open up each individual file!
Thanks

yes, create a new batch sequence, no need to add any commands, just click on output options to select the pdf optimizer settings.

Batch-process SVGs to remove paths

I have well over a hundred SVG files, from each of which I need to remove several path elements. The paths are named the same in all of the files, and I know SVG is XML-based, so I would think it should be fairly simple (for some values of simple). I've searched the Net, but I can't find anything already existing that's designed with this purpose in mind, and Inkscape doesn't support macros/batch jobs. I'm not terribly familiar with XML, but if anyone can even point me in the right direction, that would be a start.
Full disclosure: the paths in these SVGs are intended to be watermarks, from a trial version of some conversion software, which I found after hours of trying to find a way to view DWF files on Linux. If you think this is cheating, just don't help me.

Maybe a simple sed command could do your work.
sed 's/old/new/g' inputFile > outputFile
new is a regular expression.
http://en.wikipedia.org/wiki/Sed
Ok, thats not XML based.
You could try this: http://en.wikipedia.org/wiki/Xslt
Last edited by Perry3D (2009-08-14 08:38:32)

HT5254 I have gone through the process for "Malware Removal Tool" and I cannot find a place where to make this tool work? Can somebody tell me?

First of all, I would like to know how do I know that I have "Flashback Malware" in my computer? - I have decided to install the removla tool just in case, but cannot find anywhere to activate and start the process of cleaning or detecting this malware. Will appreciate some advise on this subject.

Did you install it via Software Update or did you download the Apple malware installer software? If so, there's nothing for you to do. It's all automatic. There are no programs to run. See:
Helpful Links Regarding Flashback Trojan
Visit Thomas Reed's site for insight and help: Mac Malware Guide
A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started. However, be careful about what you do as new variants of the malware circumvent the efforts of earlier tools.
Also see Apple's article About Flashback malware.
Apple has released Java updates for Snow Leopard and Lion users:
Java for OS X Lion 2012-003; available only for users of Lion with Java installed.
Java for Mac OS X 10.6 Update 8; available only for users of Snow Leopard.
Flashback malware removal tool; available only for users of Lion without Java installed.
Install whichever shows up in Software Update. It removes the malware (if present), updates Java (if present) and tightens up Java settings for the future. You may download from Apple's web site instead of using Software Update, but it's important to know which one to get, because the other two won't work for you.
For the truly paranoid see 10 Simple Tips for Boosting The Security Of Your Mac.

PE 5.0 Batch Processing for dust removal add on

Similar Messages

Maybe you are looking for