PE 7.0 Ignores Preference to Verify and Delete from Flash Card

PE 6.0 worked correctly but 7.0 ignores the settings in Edit==>Preferences to verify and delete files after importing into PE. If you change the setting manually every time you import, it does ask to delete files and does delete them but PE 7.0 ignores the preference and I often forget to delete the pictures manually and have a mess when I have new and old pictures on the flash card and it fills up unexpectedly while I am in the field!

I had the same issue and launched a support case with Adobe. After a short perioed of understanding the issue I was having, the suggestion was a corrupt psa.prf file. I deleted the file per their instructions and the issue went away. Of course I had to change back all my settings in the preferences dialog, but well worth it to eliminate this issue.
This is the last part of the the dialog from them
Thank you for writing back to us at Adobe Support.
I am contacting you in reference to your case #180979764 dated
06/06/2009.
I researched on your issue and found some relevant information. I think
that damaged preference files might be the cause of your issue.
Let us try to recreate the Photoshop Elements Organizer preferences file
to eliminate problems that damaged preferences file might cause.
I would like to inform you that When you use this solution, the
Organizer will create a new preferences file and you will lose custom
settings. However, the file that you rename in Step 2 below is your
original preferences file. If you determine that the preferences file is
not causing the problem, then you can restore your custom settings by
following the additional instructions after Step 3.
To re-create the Photoshop Elements Organizer preferences file:
1)Close the Photoshop Elements Organizer.
2)Rename the psa.prf file (for example, to psa.old) in C:\Documents and
Settings\[your user name]\Application Data\Adobe\Photoshop E
lements\7.0\Organizer.
3)Open the Photoshop Elements Organizer. The Organizer creates a new
preferences file.
If the problem continues, then a damaged preferences file is not the
cause of the problem. To restore custom settings, delete the new psa.prf
file and restore the original name (psa.prf) of the file that you
renamed.

Similar Messages

Urgent -Create RFC for update the database and delete from the database

Hi Guy's,
Please help me how to create the RFC for update to databse and delete from database(step-by-step) procedure.
Thanks and Regards,
Sai.

Hi,
Please go through the following link,
reward if helps.
[RFC Step By Step|https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728]
regards,
mahantesh

How do i find and delete adobe flash installer

how do i find and delete adobe flash installer

It is likely in your Downloads folder if you downloaded it from Adobe. If you downloaded it from someplace else, please add more details.

Is there a way to recover deleted pictures taken with my iPhone and deleted from PhotoStream

is there a way to recover deleted pictures taken with my iPhone and deleted from PhotoStream on the same iPhone?

Here's general advice:
You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
iOS: Importing personal photos and videos from iOS devices to your computer

How do I re-download videos which have been uploaded onto iCloud and deleted from my device?

How do I re-download videos which have been uploaded onto iCloud and deleted from my device?

Hi yvrtoakl,
I'm sorry, I'm a bit unclear on what you mean by "uploaded onto iCloud". If you are referring to videos synced to iCloud using the new iCloud Photo Library feature, you may find the following article helpful:
iCloud Photo Library beta FAQ - Apple Support
On the other hand, if you are talking about video files that have been stored on iCloud using iCloud Drive, then this article may be of more use:
iCloud Drive FAQ - Apple Support
Regards,
- Brenden

If I transfer to DVD and Delete from iPhoto...

There are a lot of pictures I'd like to delete from iPhoto. If I transfer them to a DVD or CD, can I transfer them back to iPhoto at a later date...especially if I delete them from iPhoto after they're burned to CD/DVD?
I guess I'd like to know if I can store them on disk rather than in iPhoto/my hard drive?
Is this possible, and if so, is there anyone out there that can help me out?

Justinbear56:
Welcome to the Apple Discussions. Yes. There's two ways you can do that.
The first is:
1 - select the photos you want to backup to the HD and put in an album. (Easier to assemble and remove later).
2 - select the album and use the Share->Burn menu option.
This will create a CD that, when mounted in the optical drive with iPhoto running, will show up in the Source pane and will allow the files to be viewed and copied back to the library if needed for any use.
3 - delete the photos in the album by selecting all and typing Option+Delete and then emptying iPhoto's trash.
The second way will allow you to still see the photos via thumbnail only but remove the full sized files from your HD. It is:
1 - assemble the photos you want to remove into an album. If the photos are grouped by rolls then just use the rolls and don't create an album.
2 - Select the album/roll(s) and, using the File->Export->File Export menu option export them to a folder on the Desktop.
3 - insert a blank CD/DVD in the drive. When it mounts on the desktop give it an appropriate title.
4 - Drag the folder you created on the desktop into the disk to copy the files and their containing folder to the disk and burn the disk.
5 - Go into iPhoto's Advanced Preference pane and deselect the option to copy files into the library when importing.
6 - mount the newly burned disk on the desktop and drag the folder on the disk into the open iPhoto window. This will copy alias files of each photo on the disk and create thumbnail versions in the Data folder.
You can either delete those original files from the library first or allow iPhoto to import duplicates and then delete the original files.
7 - Go back to the iPhoto Advanced Preferences and reselect the option to copy files into the library.
Now you can view those files in thumbnail version up to but not quite the full size via the slider. You will not be able to move them or use them in albums, books, etc. But you will be able to view them. If you put the disk back in the drive and mount it, then you will be able to edit them (the edited version will be stored in the library and removed if you do a revert to original) and use them normally. It probably would be a wise thing to place those photos in an Album and name it for the disk that they are on for each retrieval.
I've creates several Tutorials on the use of alias based iPhoto libraries that can give you an idea of what can be done.
G5 Dual Core 2GHz, 2G RAM, 22 Display, 250G HD, 200 & 160G FW HDs, QT 7.1P Mac OS X (10.4.6) Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

How do I improve performance while doing pull, push and delete from Azure Storage Queue

Hi,
I am working on a distributed application with Azure Storage Queue for message queuing. queue will be used by multiple clients across the clock and thus it is expected that it would be heavily loaded most on the time in usage. business case is typical as in
it pulls message from queue, process the message then deletes the message from queue. this module also sends back a notification to user indicating process is complete. functions/modules work fine as in they meet the logical requirement. pretty typical queue
scenario.
Now, coming to the problem statement. since it is envisaged that the queue would be heavily loaded most of the time, I am pushing towards to speed up processing of the overall message lifetime. the faster I can clear messages, the better overall experience
it would be for everyone, system and users.
To improve on performance I did multiple cycles for performance profiling and then improving on the identified "HOT" path/function.
It all came down to a point where only the Azure Queue pull and delete are the only two most time consuming calls outside. I can further improve on pull, which i did by batch pulling 32 message at a time (which is the max message count i can pull from Azure
queue at once at the time of writing this question.), this returned me a favor as in by reducing processing time to a big margin. all good till this as well.
i am processing these messages in parallel so as to improve on overall performance.
pseudo code:
//AzureQueue Class is encapsulating calls to Azure Storage Queue.
//assume nothing fancy inside, vanila calls to queue for pull/push/delete
var batchMessages = AzureQueue.Pull(32); Parallel.ForEach(batchMessages, bMessage =>
//DoSomething does some background processing;
try{DoSomething(bMessage);}
catch()
//Log exception
AzureQueue.Delete(bMessage);
With this change now, profiling results show that up-to 90% of time is only taken by the Azure Message delete calls. As it is good to delete message as soon as processing is done, i remove it just after "DoSomething" is finished.
what i need now is suggestions on how to further improve performance of this function when 90% of the time is being eaten up by the Azure Queue Delete call itself? is there a better faster way to perform delete/bulk delete etc?
with the implementation mentioned here, i get speed of close to 25 messages/sec. Right now Azure queue delete calls are choking application performance. so is there any hope to push it further.
Does it also makes difference in performance which queue delete call am making? as of now queue has overloaded method for deleting message, one which except message object and another which accepts message identifier and pop receipt. i am using the later
one here with message identifier nad pop receipt to delete message from queue.
Let me know if you need any additional information or any clarification in question.
Inputs/suggestions are welcome.
Many thanks.

The first thing that came to mind was to use a parallel delete at the same time you run the work in DoSomething. If DoSomething fails, add the message back into the queue. This won't work for every application, and work that was in the queue
near the head could be pushed back to the tail, so you'd have to think about how that may effect your workload.
Or, make a threadpool queued delete after the work was successful. Fire and forget. However, if you're loading the processing at 25/sec, and 90% of time sits on the delete, you'd quickly accumulate delete calls for the threadpool until you'd
never catch up. At 70-80% duty cycle this may work, but the closer you get to always being busy could make this dangerous.
I wonder if calling the delete REST API yourself may offer any improvements. If you find the delete sets up a TCP connection each time, this may be all you need. Try to keep the connection open, or see if the REST API can delete more at a time
than the SDK API can.
Or, if you have the funds, just have more VM instances doing the work in parallel, so the first machine handles 25/sec, the second at 25/sec also - and you just live with the slow delete. If that's still not good enough, add more instances.
Darin R.

IPad connected to Microsoft Live mail. Messages deleted in Live website do not sync and delete from iPad.

My iPad 3rd Gen running iOS 7. It is connected to Microsoft Live email, and I have it syncing 30 days of messages. I frequently use the outlook.com website to read and delete messages. When I look at my iPad inbox, the messages remain even though I have already deleted them in the website. This behaviour persists whether I am on Wi-Fi or cellular data.
Do I have a configuration set incorrectly, or is this a known issue with MS Live?

My experience is with hotmail not live mail, but might be something to look into. I had to go into the options of my hotmail and enable the ability for the device to update mail. Prior to that, I'd have to delete the same mail off my iPod and iPad, but after I enabled that I could delete off my iPod and have that reflected on my iPad.
So maybe poke around in the settings for live mail and see if there's a setting to allow your devices to delete from the server.

Merge update source table and delete from target table problem

Hello Friends,
I am a newbie in SQL Server world and I am in a situation where I need to delete the bunch of records from the TARGET table using the values from the SOURCE table.
The TARGET table has close to 400 Million records, so I need to delete the records in small batches of about ~10,000 rows.
I figured out a way to delete in batches by refering the following 2 posts
http://sqlperformance.com/2013/03/io-subsystem/chunk-deletes
http://dba.stackexchange.com/questions/1750/methods-of-speeding-up-a-huge-delete-from-table-with-no-clauses
I think my best option to delete and update in 1 pass would be through using Merge statement, so for that I constructed following SQL.
MERGE dbo.table1 AS TARGET
USING
SELECT File_name FROM dbo.table2
WHERE FILE_DESC = 'EDI'
AND [Processed_date] < DATEADD (WEEK, -10, Getdate ()) AS SOURCE
ON (TARGET.File_name = SOURCE.File_name)
WHEN MATCHED THEN DELETE (FROM THE TARGET)
WHEN MATCHED
THEN UPDATE SET SOURCE.PROCESS_delete_date = GETDATE()
But, when executed, it throws following error and I am struggling to figure out what is wrong with the above syntax.
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'SELECT'.
Msg 156, Level 15, State 1, Line 5
Incorrect syntax near the keyword 'AS'.
Can any expert please help a newbie as I learn the new way.
Thanks a lot.

Visakh, we can have more than 1 matched clause in merge as per the Microsoft sql statement, but we need to add a condition along with the match. thanks for your prompt response on this query. your query is logically fine but when executed, it throws
following error. Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'DELETE'. Msg 102, Level 15, State 1, Line 8 Incorrect syntax near ')'. remember, my server machine is 2005 version & my work machine is 2012. dont know why your query
is not working.
MERGE is available only from 2008 onwards
Yes you're correct but again not more than two MATCHED clauses even if you specify condition
see MSDN documentation below
WHEN MATCHED THEN <merge_matched>
Specifies that all rows of target_table that match the rows returned by <table_source> ON <merge_search_condition>, and satisfy any additional search condition, are either updated or deleted according to the <merge_matched> clause.
The MERGE statement can have at most two WHEN MATCHED clauses. If two clauses are specified, then the first clause must be accompanied by an AND <search_condition> clause
from
http://msdn.microsoft.com/en-us/library/bb510625.aspx
Also I guess Composable DML which used is also not present in 2005
So in your case you can try this instead
DECLARE @DELETED_FILES table
File_Name varchar(100)
DELETE t
OUTPUT DELETED.File_Name INTO @DELETED_FILES
FROM dbo.table1 t
INNER JOIN dbo.table2 s
ON t.File_name = s.File_name
WHERE s.FILE_DESC = 'EDI'
AND s.[Processed_date] < DATEADD (WEEK, -10, Getdate ())
UPDATE r
SET r.Process_Delete_Date = GETDATE()
FROM dbo.table2 r
INNER JOIN @DELETED_FILES AS p
ON p.File_Name = r.File_Name
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

I cannot find my pictures in iphoto after downloading and delating from memory card....

I downloaded my pictures from memory card, and once it was done, iphoto asked me if I wanted to keep the pictures into the memory cart, I pressed no, and now I cannot find my pictures anywhere... Is there a way to find them back ?

Hard to say
Are they in last import?
do not use your memory card until you resolve this - you may want to use software like Media Recover to recover the images on the card
You can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
For the future a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
LN

Wireless headset,kde and music from flash videos playback

Merry christmass folks! Guys I`m having problems to stream audio from youtube on my headset. I suspect it is something related to kde configurations. I`ve set it as primary device in all settings I`ve found. If I do the sound test it plays properly the sounds from left and right ear. Still I can hear streams as grooveshark or youtube. It is something as the sounds from flash not being played. Still I`ve set them to max.\
Any ideas?
Merry Christmas!

Hi there
Out of curiosity, why 15 FPS? Why not leave Captivate at 30 FPS and encode the videos at the same rate? Does it reduce the size drastically or something?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HT1918 I went to my account and changed from Credit Card to Paypal but it hangs on web site Telling me "One moment please"

Just wanted to change over from credit card to paypal and nothing happens

Hey mha007,
thanks so much for taking the time to respond. Out of desperation, I called my ISP and they removed it from my computer. Man, I wish I knew what caused this. I would share my screen with you but all info, I've either deleted or it was removed when ATT Support Tech did their stuff.
Again, thanks for your kindness. Leeflea

Using Bulk operations for INSERT into destination table and delete from src

Hi,
Is there any way to expediate the process of data movement?
I have a source set of tables (with its pk-fk relations) and a destination set of tables.
Currently my code as of now, is pickin up the single record in cursor from the parentmost table, and then moving the data from other respecitve tables. But this is happening one by one... Is there any way I can make this take less time?
If I use bulk insert and collections, i will not be able to use the DELETE in the same block for same source record.
Thanks
Regards
Abhivyakti

Abhivyakti
I'm not 100% sure how your code flows from what you've stated, but generally you should try and avoid cursor FOR LOOPS and possibly BULK COLLECTING.
I always follow the sequence in terms of design:
1. Attempt to use bulk INSERTS, UPDATES and/or DELETES first and foremost. (include MERGE as well!)
2. If one cannot possibly do the above then USE BULK COLLECTIONS using a combination of RETURNING INTO's and
FORALL's.
However, before you follow this method and if you relatively new to Oracle PL/SQL,
share the reason you cannot follow the first method on this forum, and you're bound to find some
help with sticking to method one!
3. If method two is impossible, and there would have to be a seriously good reason for this, then follow the cursor FOR LOOP
method.
You can combine BULK COLLECTS with UPDATES and DELETES, but not with INSERTS
bulk collect into after insert ?
Another simple example of BULK COLLECTING
Re: Reading multiple table type objects returned
P;

How to stop "Add Row" and "Delete" from committing.

Hello, I am new to Application Express, and maybe someone can help me make this save like an Oracle Form.
If you hit the "Add Row" button, enter data, then hit the "Add Row" button again, it commits the first row. If you check a value and hit the "Delete" button, it commits the delete. I would like the insertions and deletes to be handled like an update, that is with an explicit commit by hitting the "Apply Changes" button.
Can I control this in Application Express, and how?
Thank you,

Kevin,
1. instead of having a form on a table, you would create a form on a collection,
2. collection is also a table but it is only of a temporary nature - it is valid with the corresponding session. Once the session is closed, you can't access the collection.
3. to see how to create a collection and a tabular form use this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:176
4. add row and delete will add / delete a copy of your table data. You can then create a process to save the data in your target table only if the button apply changes is clicked.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Can't find photos after uploading and deleting from camera

Uploaded photos from samsung camera and Asked if I wanted to delete photos off camera afterwards which I did. Photos nowhere to be seen ANYWHERE on the Mac! Help! VIP pics!

a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Do the photos show in "last import"?
LN

PE 7.0 Ignores Preference to Verify and Delete from Flash Card

Similar Messages

Maybe you are looking for