PE 7 memory and export errors

In Premiere Elements ver 7, I have put together a 4 1/2 minute video made up of mpeg4 HD 720p mixed with regular avi digital footage. I am having memory errors and export errors when trying to render into a wmv or mpeg file. When working on previous videos with non-HD footage, I didn't have these issues. I also recently put together a 1 minute mpeg4 HD 720p video rendered into HD 720p wmv file without any issues.
1) memory errors - I got these when I was putting the video together and when rendering. After a lot of restarting the PC and reworking the video, I was able to finally complete in pre-render format. It includes music soundtrack and transitions/effects.
Here are my PC's specs:
Dell Inspiron 530 with Intel Quad Core CPU 2.66Ghz processor
4 GB RAM
32 bit OS
Windows Vista SP1
When rendering, I get the "caution - low memory, save your work" message. I have since set the virtual memory paging file size per Technote kb404939. This seems to have helped a little bit but still getting the message even though it continues to render....but then I get the export error message....
2) Export errors - I first tried to render into a wmv HD 720p 30fps file. In the first 1 of 2 rendering phase, I got the "Export Error - failed to return a frame - cancelling operation" message. I checked for gaps in the timeline and there are none. Even though I do have some black space/dip to black sequences, I can "page down" through the entire movie without any pauses or hiccups with the CTI (Current Time Indicator).
I then tried to render into a smaller wmv LAN speed file, and it went through the first 1 of 2 phases rendering (with the low memory message but it kept on going). Just after it started into the 2 of 2 rendering phase, I got an error message saying "Export Error - Unknown Error".
What to do? I'm very frustrated at this point after a great deal of time invested in this video and troubleshooting the issues. Please help. Thanks.

What are the sources of your video? What types of camcorders did this video come from?
Premiere Elements supports AVCHD video, but does not work well with video from Flip and webbie camcorders, which use proprietary codecs. They can also use non-standard frame rates. Conversion is usually necessary before the files can be edited in Premiere Elements.
And does your DV footage come from a miniDV camcorder captured over FireWire? And what project settings are you using in Premiere Elements.
I would also not recommend mixing HD and DV footage in the same project. This could also be contributing to your problems.
I also recommend you visit Windows Update and manually download any (even non-critical) updates. Vista should be at least on SP2. You may also want to download the latest version of Quicktime.

Similar Messages

PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

Dear Adobe Community,
I got my first imac a few days ago, and i decided to install Adobe CC.
When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
And I also have a problem with Premiere, when i want to export a project says that premiere must close.
This is the try version, is this a problem of Adobe or Apple? i'm very worried
Help!
Thank you!
Ivana

Muchas gracias!!! Ha funcionado!
El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
created by Federico Platon in Foros de usuario a usuario - View the full discussion
Confirma que se trata de una cuestión de permisos.
Por cierto te aconsejos actualices la 9.1 a 9.2, posiblemente se habría arreglado así también.
Bueno los pasos son:
2. Select Go from the Finder Menu.
3. Select Computer.
4. Select Macintosh HD.
5. Select Users.
6. Select your user profile.
7. Right click on user profile. Select Get Info.
8. Go to bottom and unlock with admin password to make changes.
9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
Creo que no se necesita traducción.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Foros de usuario a usuario at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Keylight is out of Memory, AE export errors everytime!

This is really frustrating, I need this video to be done to meet a deadline and AE gets an error everytime I try and export even through the render queue!
8-core Mac Pro
16 gigs of ram
1.5tbs of HD space
It either gives me the image buffer error or "Keylight is out of memory. (4)!
Please help!

You should always use the render queue when possible. Never use the export function unless you need to. Have you tried enabling the "purge" function in the secret prefs? Hold down "shift" when accessing your prefs, and then navigate to the secret section. Disable the layer cache, and enable the purge. You can start with a value of 10, or so, but you may need to set it to purge every frame.
What are your comp/project settings? How big is the comp you are rendering?
After your project renders, don't forget to reset those settings to their defaults (disable check box).

I think the error console might be a source of memory and lagging errors

I notice that if I open the Firefox Error Console logs that the error listings are fast and frequent (which is okay if the browser is working past them). However, after using Firefox v2 and upward I am now pondering if the error log might be the source of the hard-to-kill lagging and memory issues. I note that as the longer Firefox runs, the longer the error log must grow as well as the number of page fault calls which all eats up memory or requires more frequent disk swap paging to record it all. The longer it all runs, the bigger the error log goes.
Since the error log probably gets more leeway on memory cleanups and CPU hits (to retain accuracy) this eats up more processor time and more hard-to-kill memory space, which then kicks in the system's Paging File causing more disk swapping.
My suggestion is simple, create an ABOUT:CONFIG option to, clip off the error log once 100 (or user-defined) errors are hit. Delete the oldest errors, keep the newest until they get pushed off the rotating stack. Obvious problems with this are first renumbering rolls (deleting 001 and changing 002 to oo1 and so on also eats up pointless CPU cycles). Having an ever-growing numbering stack would hit an out-of-bounds error eventually (delete 001, number latest error 101, and so on).
A rotating "ERROR ROLLOVER LIST POSITION MARKER" is simpler.
Just have a variable called "ERROR LIST ROLL MARKER" and it holds a variable of 001 to 100. Whatever numerical value of the "ERROR LIST ROLL MARKER" is marks where the text value of the error listing is named "ERROR LIST ROLL MARKER".
Let us use for example that the last error on the rolling error list was at position 087
Text value for error list position 087: [ reference to undefined property ]
The value of numeric variable "ERROR LIST ROLL MARKER" would be 088
The text value for error list position 088: [ ERROR LIST ROLL MARKER ]
When we get the next new error, the variable numeric value of "ERROR LIST ROLL MARKER" would become 089
The text for error list position 089 would become: [ ERROR LIST ROLL MARKER ]
The text value for error list position 088 would become the text of whatever the current error was.
In this manner you can keep a simple quick list, save a bundle of memory, and in the event of a crash, you look for ERROR LIST ROLL MARKER values and you know exactly what the last error was and the 99 that preceded it.
When the ERROR LIST ROLL MARKER hits 100, then you simply push that to the 001 location when the next error hits and after the next error, the ERROR LIST ROLL MARKER becomes 002 and that current error text overwrites the 001 location.

Hi, I managed to solve the errors (kind of) by using this code.
for (var i:int = tower1BulletArray.length - 1; i >= 0; i--)
if (tower1BulletArray.parent)
tower1BulletArray[l].parent.removeChild(tower1BulletArray[l]);
tower1BulletArray.splice(i, 1);
However, the problem still persists that the bullets stay in the screen after I change the scene. Any solution? Thanks!

Blank second page and export error in Crystal 10 Web Report Viewer

We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer. When they view a report that is 12 pages, the first page appears OK. When they click Next to go to the Next page, the page shows as blank. The second issue is that If they try to export the .rpt they get this error:
Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack trace:
[COMException (0x80000220): Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
      CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
[LoadSaveReportException: Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
I can view and export the same .rpt file in my environment without any issues. Has anyone seen these errors before and have any ideas on how to resolve them? They seem to be environment related since I can view the same report OK on my machine.
This is using Crystal 10 on Windows Server 2003.

Hello,
This sounds like a postback issue. Does your application handle postback by putting the report in session?
There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
The basic code is:
Private crReportDocument As ReportDocument
    Private Sub ConfigureCrystalReports()
        'Check to see if the report exists
        If (Session("crReportDocument") Is Nothing) Then
            crReportDocument = New ReportDocument()
            crReportDocument.Load("C:\1 - Report\CRParams.rpt")
            'Do anything required for the report
            'Logon to the database
            'Pass parameters
            'Assign the report into Session
            Session("crReportDocument") = crReportDocument
            'Assign the report to the Viewer
            myCrystalReportViewer.ReportSource = crReportDocument
        Else
            'Assign the report that is stored in Session to the report instance.
            crReportDocument = CType(Session("crReportDocument"), ReportDocument)
            'Assign the report to the Viewer for each postback
            myCrystalReportViewer.ReportSource = crReportDocument
        End If
    End Sub
Elaine

Insufficient memory and "unknown error 961"

Periodically, I receive an insufficient memory error when I try to update an app. It happens about every other time and eventually fixes itself -- that is, does download the update.
Today I received an additional error "unknown error occurred during download '961.'"
I've removed all pictures and downloaded files. I've cleared the cache.
Both the device (internal) and SD storage have numerous gigs of free space.
The device also runs very slowly.
Any suggestions? Any advice is appreciated.
Thanks!

Method 1: Clearing the cache and data
1) To do this, go into your phone’s settings, then Applications (or Apps or Application Manager), swipe to the left to ”All” and scroll down until you find Google Play, tap on it.
2) In the app information page, tap on the button to empty the cache.
3) If this doesn’t solve the problem, try to delete the data from the Play Store
Please See More methods about Error 961here at appslova.com.
Android Fix: Unknown Install Error 961

"Memory full." error while exporting report to PDF format - CR2008SP2

 
Hello, 
 
I am developing a C#.NET application that uses the CR2008 SP2 .NET libraries. This application performs some database updates and uses CR2008 SP2 to run 7 different reports and export the results to PDF files. This application is a console application that only uses Crystal to export the rendered reports - it does not use previews or printing. 
 
The specific pattern of this application is as follows: 
 
- perform some database updates 
- render report #1 and export it as a PDF file 
- perform some database updates 
- render report #2 and export it as a PDF file 
... pattern repeats to report #7 ... 
 
This application works fine as long as I run only one instance of it at a time. The problem occurs when I try to run multiple instances of this application at the same time. When I run multiple instances of this application at the same time (against totally different databases) each instance will start up happily and begin running through the process described above. After a few moments one or more instances will fail during the report export. The specific error is as follows: 
 
"Memory full. Failed to export the report. Not enough memory for operation." 
 
The error always comes from the call to: 
 
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(Format, FileName) 
 
I have watched the memory consumption of these instances of my application while they are running. They never seem to exceed approximately 52MB each. At this time task manager reports over 1GB of physical memory free. These numbers lead me to believe that memory is not actually "full". 
 
Here are some specifics about the environment: 
 
Dell Vostro 1720 / P8600 / 4GB 
Windows 7 Ultimate x64 
SQL Server 2008 SP1 x64 
Crystal Reports 2008 SP2 
 
Specifics about the C# application: 
 
IDE: Visual Studio 2008 SP1 
Type: Console Application 
Target platform: x86 
.NET Framework: 3.5 SP1 
Crystal References: 
- CrystalDecisions.CrystalReports.Engine (v12.0.2000.0) 
- CrystalDecisions.Shared (v12.0.2000.0) 
 
Specifics about the report templates: 
 
The report templates are RPT files saved from CR2008 SP2. They are relatively simple. A few of them (maybe 3) contain a single subreport. 
 
Specifics about the database: 
 
Each database is approximately 1GB in size. The database contains many tables but the reports only access a handful of tables. Each table that the reports access have maybe a few hundred rows tops. Most have less than 100. Likewise, when the reports perform their selections the resulting rowset for the reports is anywhere from about 20 records to a few hundred records tops. 
 
A few items to note: 
 
- Multiple instances of my application need to be able to run on a single machine at the same time. It is a specific design requirement. 
- My application works fine as long as I run only one instance of it at a time. 
- My application works fine when I run multiple instances if I comment out the Crystal part of it. 
- My application works fine when I run multiple instances if I change the export format from PDF to HTML32 or HTML40 (have not tried any others) 
- The machine has over 1GB of physical memory free when this error occurs. 
- I have taken steps to ensure that I am properly disposing of my CrystalDecisions.CrystalReports.Engine.ReportDocument instance just after each export is complete. I have tried to use the "using" keyword, as well as explicitly setting the instance to null and calling the .NET framework garbage collector. This did not seem to help. 
 
Any assistance with this issue would be greatly appreciated. 
 
Steve 
 
Edited by: scbraddy on Mar 11, 2010 1:53 AM

 
Jonathan & Ludek, 
 
Thanks for the timely response and good suggestions guys! 
 
I have performed a few more tests today in order to help answer some of your questions. 
 
Below are my responses. Some of them are answers to questions and some of them are observations based on tests I have performed today. 
 
- The database system is SQL Server 2008 SP1 Developer Edition x64. 
 
- The C# application connects to the database using the native .NET SQL client (System.Data.Sql). 
 
- During runtime I connect the report to the database by looping through the ReportDocument.Database.Tables collection. For each Table found I create a CrystalDecisions.Shared.TableLogOnInfo instance, fill in the table name, server name, database name, user ID, and password, and use Table.ApplyLogOnInfo() to apply it. I do the same thing for the subreports collection if there are any. Like I said, about half of the reports contain a single subreport. 
 
- The report templates are currently set to use the "SQLOLEDB" Provider. The Database Type is set to "OLE DB (ADO)". I am not entirely sure what you mean by trying a different database driver. I assume you mean to change the provider? If so, given the fact that we are using SQL Server 2008, what would I change it to? 
 
- If I do not perform the database updates during application runtime (instead, perform them ahead of time and then allow the application to only render the reports) then I still have the same problem. Nothing changes. 
 
- I installed the Fix Pack 2.5, rebooted, and tried again. Same problem. 
 
- I do not beleive that I am using XML transforms. How would I know? 
 
- Regarding fragmented memory: It is hard for me to believe that, given the amount of memory free on the machine once all processes are up and running (1GB+), and the size of the processes (~50MB), that a contiguous block could not be found. Maybe there is some Crystal process that is attempting to balloon out of control, but as far as I can tell my application is not getting very big. I will not rule this out of course because I don't know for sure. 
 
- Regarding killing the process once a report is rendered: The problem with this is that the application needs to perform these 7 groups of updates and render these 7 reports in a specific sequence all as part of one complete "pass". Also, this application needs to be able to be able to handle a scneario where one or more instance of the application is started on a single machine at roughly the same time (pointed at different databases). The application actually does work fine in this regard (staying well within the capabilities of my 4GB laptop even when 8 of them are running) except that I always get the same error when I choose PDF as my export format. 
 
- I ran a test today where I changed the export format to HTML40 and started 8 instances of the application at the same time, each working from a different copy of the database. The instances ran a little slow but did complete in good time with no errors. Please note that changing the export format to PDF will cause the application to fail with the "memory full" error if even only 2 instances are running at the same time. The only way I can successfully complete a run with the export format set to PDF is to run only 1 instance at a time. I can run it over and over all day long and it will not fail, as long as only 1 instance is running at a given time. As of yesterday I had only proven that the application would complete when using the HTML40 export format when 2 or 4 instances are running, but today I doubled it again (to 8) and still no failure while using HTML40. This is possibly the most interesting fact about this problem, and is another reason why I am skeptical that memory fragmentation is the culprit. 
 
We would like to solve this problem because we would like to continue to target the PDF format. It is the standard report export format for our applications. If we cannot solve this problem we may call a meeting and decide whether to proceed with the HTML40 export format, or possibly dump Crystal from this project altogether. 
 
Thanks again for your interest in our problem and your timely and helpful responses. I'm really not sure where to go next ... maybe change the database provider in the templates? I will need some specific advice in this area because I'm not sure what to do. Any more ideas you guys have will be greatly appreciated on this end! 
 
Steve 
 
Edited by: scbraddy on Mar 12, 2010 2:18 AM

Export error message and render error message

Hi all,
I just finished a16 min. movie, lots of hours containing two slides shows and a bunch of short video clips, lots of effects, transitions with jpgs, pip's, animated gifs and you name it. It came out great! ON THE COMPUTER THAT IS!... I am running pe7 on a brand new hp elite 410y desktop - AMD Phenom II x6 six-core processor 1045T, 8 GB PC3-10600 DDR3 SDRAM, 3MB L2 cache + 6MB shared L3 cache memory, 1TB seriel ATA hard drive and ATI Radeon HD 5570 graphics with 1GB DDR3 dedicated memory. My operating system is windows 7 home premium edition 64 bit. I used jpg's from three different camera's, downloaded google images, as well as the animated gifs. I took some video from my Nikon coolpix L110 and converted all mov files to avi using the free Prism converter...I didn't think to just use premiere to export to DV AVI. I also took youtube video and converted them to avi. I kept getting adobe system memory low, proceed with caution, did a bunch of saves and got throught it. I tried to render and the error unknown compiling movie message kept coming up. Well, at that point I just broke down, so many hours and then having to show the actual finished product to my friends, the stars of this movie on my little 20" computer monitor and not my big screen tv sucked...so dissapointing but moving on.
I started to search the forums and read another thread that Steve Grisetti answered about changing all photos to no more than 1000x750 and then try to split up the movie and export in premiere to DV AVI. I only had a few photos like that, changed them and I still keep getting the same error message. I tried just taking the first minute, did a save as, named it test and tried to export, no luck. There seems to be something in the first part that premiere does not like and I did notice on playback that some of my effects were not working i.e. video pip sliding in from the left of the screen over a jpg. I am so frustrated.
I finally chopped it up to three parts and tried exporting the 2nd part of just the video clips to DV AVI, no problem but changed my look. When I hit export movie and look at the settings summary Filetype is CompilerMPEGproxy, the Video settings are Compressor: I-Frame only MPEG Frame size 1440h 1080v (1.333) Frame Rate: 29.97 frames/second Pixel Aspect Ration: HD Anamorphic 1080 (1.333) Fields: Upper field first, Audio Settings are Compressor: uncompressed Sample rates: 48000 sample/second Channels: Stereo and Sample Rates: 16 bit. If I change to DV AVI, then the whole look changes, probably because the frame size is only 720h 480v. Is there a way to export to DV AVI and keep the larger frame size?
I wanted to keep the original size, so I just tried to render part 2 and part 3 as is and had no problem, but now the audio skips. I have a wav file on part 3 and part 2 has the converted avi audio that came with the clips. Please help, any suggestions will be most appreciated. I can't start all over...I'm burnt.
debby

Hi Steve,
Thank you for your promptness...I am still a little confused though, I made a copy of my final movie and was working off the copy to try all these different scenerios to get it to render and now have alot of different projects, same movie, different project names. Should I delete all the copies and take my original and go to Edit/Preferences/Media Cache and clear the media cache. Then the timeline menu and delete render files and then go to the FAQ's to troubleshoot.
A quick second question: I did get to render two parts of the whole movie, but the audio is skipping. Can that be fixed and can I use it?
Thank you,
debby

Need help in Exporting list to memory and return in background

Hello Experts,
I have a program which reads data from mc.9 by exporting list to memory.When I run it in foreground its working fine . However if I schedule it as a background program it is unable to get list from memory.
Any help will be appreciable.
Thank you

Hi jayaram,
I tried to do as you said. Its creating spool request and status to completed (sm37 instead of sm36 bcoz i don't hv authorization in production server). Now I didn't see any errors in job log. But data coming to ztable is as usual ( all are ZEROS).
Hey when i tried doing it as below
SUBMIT RMCB0300 WITH SL_WERKS-LOW = P_WERKS
 WITH SL_LGORT = 'W001'
 WITH SL_SPMON-LOW = P_FPERIOD
 WITH SLV_NO = 'MC.9N'
 WITH SL_SPMON-HIGH = P_FPERIOD EXPORTING LIST TO MEMORY AND RETURN .
CALL FUNCTION 'LIST_FROM_MEMORY'
 TABLES
 LISTOBJECT = LISTOBJECT
 EXCEPTIONS
 NOT_FOUND = 4
 OTHERS = 8.
IF SY-SUBRC <> 0.
 if SY-SUBRC = 4.
 message 'not_found' type 'i'.
 ELSEIF SY-SUBRC = 8.
 message 'others' type 'a'.
 endif.
ENDIF.
I found that my job with completed status but with in job log i found error of type I means that the error is with notfound type in exceptions.
Hey sorry for the postings may be due to some issues Im unable to see what i have replied in postings that's why im posting repeatedly..
Edited by: Praveen Pathuri on Apr 23, 2009 7:30 AM
Edited by: Praveen Pathuri on Apr 23, 2009 7:55 AM

LR4 'not enough memory' export error

I commonly get this error when exporting images in lightroom. I have to re-export several times until everything eventually exports.
Here are the specs on my computer.
I'm running lightroom 4.4

Once someone has replied to your specific forum message you cannot edit it. This preserves the integrity of the conversation, although in this case it may also lead to the blacklisted of your serial number of a pirate gets ahold of it.
If DdeGannes would have replied to one of the previous messages, which would still have showed his reply under yours, then it would have been possible to edit your last one, but unfortunately his reply removed your ability to edit your message and remove or replace the graphic.
Someone who knows more needs to forward this thread to a forum moderator who can edit the message or remove the entire conversation, since you know what the issue is.
Back to the original question: it may work to export less images in a batch to keep from running out of memory.
It seems like every release Adobe tweaks something about the memory management, to improve performance. LR will run faster if more things are cached in memory and less is being read from disk, but unfortunately this uses up more memory.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

Submit ALV report in Background & exporting list to memory and return

Dear all,
I created one Z program (ZPROGRAM2).
Here i use SUBMIT ZPRORAM1_ALV exporting list to memory and return.
call function 'LIST_FROM_MEMORY'.
call function 'TABLE_COMPRESS' .
ZPRORAM1_ALV output i send mail.
This all are working in foreground.
If i schedule ZPROGRAM2 in background. that SUBMIT ZPRORAM1_ALV statement not working.
Please give me the Solution.
Thanks,
Durai.V

It is because of the ALV output that you are using. Check the condition sy-batch = 'X' (background processing) and then display a classical report. It will work then.
Thanks,
Jayant

Submit report and export to memory

Hi
I am using this code to submit report
submit ZM005REP
WITH S_BLEND IN R2
WITH S_GROUP IN R3
WITH S_WERKS IN r1
exporting list to memory and return.
I am using LIST_FROM_MEMORY to read the list.
I want to further use the values from this list for calculations , but when I saw the list its just an array of strings.
I want to read the opening bal field which is returned in this list.
Any advice on this ?
Thanks,
Shital

Hi,
DATA BEGIN OF itab_list OCCURS 0.
        INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
        filler1(01)   TYPE c,
        field1(06)    TYPE c,
        filler(08)    TYPE c,
        field2(10)    TYPE c,
        filler3(01)   TYPE c,
        field3(10)    TYPE c,
        filler4(01)   TYPE c,
        field4(3)     TYPE c,
        filler5(02)   TYPE c,
        field5(15)    TYPE c,
        filler6(02)   TYPE c,
        field6(30)    TYPE c,
        filler7(43)   TYPE c,
        field7(10)    TYPE c,
      END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = itab_list
EXCEPTIONS
    not_found = 4
    OTHERS     = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = vlist
    listobject         = itab_list
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
Then you can use the ITAB_LIST for caliculation which is having all the values.
Thanks
Sudheer

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

PE 7 memory and export errors

Similar Messages

Maybe you are looking for