PE 9 trial .mov problems

I've downloaded the trial of v9 to check it out before I decide whether to buy. I've never used any version of PE but use lots of other Adobe software so it seems the obvious choice. I've immediately hit a strange problem. I tried to import some .mov files from my iPhone to use as test material and some of the files are fine but others give the error that either the file isn't supported or the required codec is missing. I installed the latest version of quicktime in case that had anything to do with it but that changed nothing. I really don't understand this, I have 8 or 9 short videos which were all shot this morning with the same iPhone and all imported to he computer at the same time and PE will happily work with some but not others. Why?? Can anybody help?
Would it make a difference if I tried to import the files from the iphone straight into PE (assuming you can do that?) rather than pick the files up from a folder on the PC?
I'd be grateful for any pointers as this has me stumped.

Steve,
thanks for the response. I appreciate what you've said about the .mov format and codecs but what was confusing me was why some were working while others weren't and yet they were all identical. The fact that some play and are importable suggests that it is compatible but doesn't explain why some were described as incompatible. I've now solved the problem by simply closing elements, restarting my PC and all of a sudden all the video files are available. Therefore I can only conclude some sort of bug but thanks for your suggestion anyway.
The bottom line for anybody else who lands here lookoing for an answer to the same problem, try restarting elements or maybe restarting your PC and then see if all your iPhone clips are available. Mine suddenly were which I don't understand but the fact that it's working now will do for me!

Similar Messages

  • Trial version problem with the wrie Create with the trial version

    help me
    trial version problem with the write Create with the trial version
    i wanna delete the Create with the trail version

    Publication on businCata I am sorry I do not understand your inquiry.  Can you please restate your question?  What Adobe software or service is your inquiry in relation too?

  • Dreamweaver 8 Trial Help problems

    Howdy - I just recently downloaded the trial version of
    dreamweaver 8 (windows XP, new Dell XPS system with plenty of
    processing power/RAM/etc.) and it appears to be working just fine,
    except when trying to access certain items on the help menu
    (dreamweaver help, getting started with dreamweaver) this causes
    dreamweaver to close (with this message "Dreamweaver 8 has
    encountered a problem and needs to close. We are sorry for the
    inconvenience."). I have finished the "getting started tutorials"
    through the adobe web site and wanted to move on to the materials
    within the help documents, but for some reason help will not work.
    I have also updated the trial to 8.0.2, and while this fixed the
    problem for a minute (I was able to access the help files one time)
    I am now back in the same boat, with no access to help.
    Any suggestions?
    Thanks a lot - Jon
    EDIT: Now I've found the online helpdocs and PDF versions of
    these, so at least I have access. In addition, I reinstalled DW8
    and this has fixed the problem, at least for now. Just curious if
    anyone has had any similar problems (although I searched the forums
    and didn't see any) with installed help. thanks again

    Standby - I have asked for some support from the cavalry!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "jcfay" <[email protected]> wrote in message
    news:ea2s22$7mg$[email protected]..
    > Howdy - I just recently downloaded the trial version of
    dreamweaver 8
    > (windows
    > XP, new Dell XPS system with plenty of processing
    power/RAM/etc.) and it
    > appears to be working just fine, except when trying to
    access certain
    > items on
    > the help menu (dreamweaver help, getting started with
    dreamweaver) this
    > causes
    > dreamweaver to close (with this message "Dreamweaver 8
    has encountered a
    > problem and needs to close. We are sorry for the
    inconvenience."). I
    > have
    > finished the "getting started tutorials" through the
    adobe web site and
    > wanted
    > to move on to the materials within the help documents,
    but for some reason
    > help
    > will not work. I have also updated the trial to 8.0.2,
    and while this
    > fixed
    > the problem for a minute (I was able to access the help
    files one time) I
    > am
    > now back in the same boat, with no access to help.
    >
    > Any suggestions?
    >
    > Thanks a lot - Jon
    >

  • JBuilder 2005 Trial Installation problem

    Just if someone else stumbles over the same problem after downloading jbuilder 2005 trial version (or upcomming foundation too I guess), installation might be a problem. The message:
    "Cannot find .... Install.exe on the CD" pops up!
    That is due to spaces in path to the install file! Just move the files to a path without spaces, and all will be fine.
    Gil

    Ain't Google great? It would have taken me eons to figure out what was going wrong!
    Another note: the installation says to remove JDK 5.0 and use the JDK 1.4.2 contained in the installation. However, you need an installed JRE to perform the install.

  • 9.2.2 install/move problem with G4 QS 2002

    I have a G4 QS 2002 with two 500GB HD's. One is partitioned into six unequal partitions, Leopard, Tiger, Panther, System 8.6 - 9.2.2, Yellow Dog, and Scratch. The Leopard has a bootable System 9.2.2 and as soon I have 10.5 in my hands AND my problem is solved, will have the Leopard OS installed. The other HD has one very small emergency partition that was created by the installation of TechTool Pro with 10.3.9 and one "large" partition.
    My problem is: 10.5 doesn't support/have the "Classic Environment" and I don't want to risk screwing up having a bootable 9.2.2 OS by the 10.5 installation, so I'd like to have the "System 8.6 - 9.2.2" partition be able to boot 9.2.2 instead but I haven't been able to achieve that yet.
    What I've tried is:
    1. Booted into 9.2.2 and attempted to do a copy but when booted into 9.2.2, it doesn't "see" the target partition because I don't let it reformat the partitions that it doesn't recognize such as the "System 8.6 - 9.2.2" partition when I boot into 9.2.2, so that partition and a few others are not mounted when I boot into 9.2.2 (I might let it reformat it if I can be sure which of the partitions it wants to reformat is which).
    2. I created an image of the 9.2.2 bootable partition with Tiger's Disk Utility and tried to restore it with the "System 8.6 - 9.2.2" partition as the target. It didn't want to do that. I booted with the Tiger install DVD and restored the bootable 9.2.2 image to the "System 8.6 - 9.2.2" partition (selected the "Erase target" option). I restarted the Mac and I notice that the restored system folder is not graphically "blessed". I can choose the "System 8.6 - 9.2.2" partition as the startup disk but it won't boot and instead the Mac eventually boots another OS. If I restart and hold down the option key, I can see that there are two bootable volumes labeled "Leopard", the original one and the restored one which in the Finder and Disk Utility is labeled "System 8.6 - 9.2.2" but it won't boot with the "System 8.6 - 9.2.2" partition that way either.
    3. I put the special version of the QS 2002 specific System 9 install CD into the DVD drawer, restart, and held down the "C" key, but the Mac eventually booted another OS. I booted into 9.2.2 and tried to launch the install SW but it couldn't see the "System 8.6 - 9.2.2" partition (see #1 above) and neither could any of the System 9 disk utilities with the CD. I boot Tiger, launch "Classic Environment" and try to run the installer but after a few screens it complains regardless if I let it do a clean install or update the restored 9.2.2 from the Leopard partition.
    The options I think I have at this time are:
    1. Boot into 9.2.2 and let it reformat the "System 8.6 - 9.2.2" partition if I can determine which partition it is and try the various steps again hoping that one will work.
    2. Install 10.5 into the Leopard partition and hope that it doesn't screwup the ability to boot 9.2.2 afterwards.
    3. Install 10.5 into the "System 8.6 - 9.2.2" partition, which is half the size of the Leopard/Tiger/Panther partitions, and live with the smaller size (or try a partition utility like iPartition, DiskStudio, or hope that the DU with 10.5 can resize partitions without really deleting them first).
    4. Do what I did originally, locate my System 9 install CD, see if I can still boot with it and install a generic System 9 into the "System 8.6 - 9.2.2" partition and update the SW with the QS 2002 specific System 9 install CD so it is bootable.
    5. Try a cloning utility like CCC, SuperDuper, etc. and hope it works better than creating an image and restoring it (isn't that how Apple intends for us to do backups and recoveries?).
    6. Back up everything even though making images doesn't seem to be foolproof, repartition the HD and reinstall/restore (I don't like this since I don't seem to have the image/restore process working to my liking and this would take a very long time (maybe 10.6 will be shipping by the time I'm done but I doubt if it Apple will support G4's with 10.6)).
    OR somebody tells me what I'm doing wrong or why my efforts don't work or what is the process that achieves my end state.
    TIA.

    Hi, barubin -
    If a volume (volume = an unpartitioned drive, or a partition of a partitioned one) does not mount when the machine is booted to OS 9, this usually means the drive or the volume does not have OS 9 drivers installed. This usually results when the drive was last formatted using OSX's Disk Utility to initialize the drive, and the option to install OS 9 drivers was not selected.
    Article #106849 - Disk Is Available in Mac OS X But Not in Mac OS 9
    If a volume does not mount when the machine is booted to OS 9, then OS 9 can not be installed on it using an OS 9 Install CD (since it is not available to, can not be 'seen' by, the installer app); and it can not be used as an OS 9 boot volume (if OS 9 can not mount the volume, then OS 9 on it can not mount itself).
    The above article suggests one possibile way to recover from that without re-initializing the drive - boot the machine to OS 9, run Drive Setup. Select the drive in question (Drive Setup can not do this for a single partition of a partitioned drive), then choose Update Driver from the Functions menu. Note that this is a non-destructive function - no data will be lost from the drive whether or not it works. If it does work, the drive, and its partitions, will then be mounted on the desktop.
    Unfortunately that recovery method rarely works, and it then becomes necessary to redo the partition or the drive.
    This can be done using OS 9's Drive Setup, but only on a whole-drive basis - Drive Setup can not re-initialize a single partition of a partitioned drive.
    It can also be done using OSX's Disk Utility; Disk Utility may be able to redo a single partition of a drive (I don't use OSX so can not test that), but it is probable you would need to redo the entire drive. Be sure to select the option to install OS 9 drivers when using Disk Utility - that option is not always selected by default.
    In either case select Mac OS Extended as the format.
    <hr>
    OS 9 has a boot limitation - the volume it is on can not exceed 200GB. 190GB is a safe max volume size to pick for an OS 9 boot volume when partitioning a drive.
    <hr>
    The installation of OSX (any version) on an OS 9 boot volume should have no effect on the OS 9 install or its bootability, provided the install method is a simple installation (no Archive and Erase, etc.).
    <hr>
    It is not necessary to use a cloning utiity to move/copy OS 9 to a different volume or drive, and have it be usable. OS 9 can be installed -
    • From an Install disk valid for the machine
    • Or by doing a simple Finder copy of it - drag the OS 9 Syatem Folder (and its associated folders, such as Applications (Mac OS 9) and Documents) to the target volume and let go, letting Finder copy it there.
    Usually a copied OS 9 System Folder is usable immediately.
    Occasionally it will arrive unblessed - it will not display the Mac OS glyph on top of the folder icon. The solution for that is to re-bless it. This can be done one of two ways (best done while booted to OS 9) -
    • Open the System Folder, double-click the file System to open it. Close System; close the System Folder.
    • Drag the files Finder and System out of the System Folder; close the System Folder. Drop the files Finder and System back into the closed System Folder.

  • Adobe cs4 (trial)  Installation problem to WinXP sp3

    I tried to download and install CS4 (trial) with akamai download manager. When I go to CS4 folder, I try to run the setup but i get the error "The Adobe Setup encounter a problem and must be terminated" I tried to open the setup.exe from the zip folder, it run's to the end and then the same error comes up again. I deactivated my firewall but again I can't install CS4. I contacted the technical support but they didn't help me. I get the following error data which I prompted to send to Microsoft. " AppName:setup.exe,AppVer:2.0.133.0, ModName:msvcr80.dll, ModName:8.0.50727.4053, Offset:000149d1. Where is the problem? Can anyone help me?

    I am also currently experiencing this problem. Any help would be greatly appreciated.
    How are we supposed to try adobe products if they wont even install for us?

  • Trial version problem when using more than 1 track - does trial version same as full one?

    I am thinking of upgrading to Premiere Elements 9 as I have upgraded my laptop. But the trial version Premiere Elements 9 doesn't even perform as well (with the same media) as Elements 4.0 did on my old laptop.
    My new laptop is an HP Pavilion with Intel(R) Core i7 Q720 @ 1.6GHz (I was a bit wary of the low GHz but HP explained that that was still better than a higher GHz figure for an i5).   I am editing both MP4 and avi files at 720 x 480.
    The problem is that as soon as I start to use more than a couple of video tracks, playback slows right up, making editing difficult.   Other software packages I have trialled on the new laptop (such as Sony Vegas) don't slow up at all, but I'd rather not buy them as I am very familiar with Premiere Elements now.
    Is this a problem with the trial version which woudl be solved if I bought the full version, or will it be the same?
    Thanks very much for any help

    The AVI format is but a wrapper. Almost anything can be inside that wrapper. This ARTICLE will give you more background, and will also tell you how to determine what is inside the wrapper.
    Especially with a laptop, I strongly recommend tuning the computer for an editing session. This ARTICLE will give you some tips. Note: there are a couple of links, just for Win7. Also, there are some good tune-up tips in the forum FAQ section, to the right of the main forum page. Of special note: the active anti-virus, pop-up blockers and spy sweepers are known to cause all sorts of problems, when trying to edit video.
    One major consideration with a laptop is the I/O sub-system - the HDD's. Most laptops only have one internal HDD, and that is anything but ideal. With eSATA external HDD's, one can get very nearly the same performance, as with multiple internal HDD's. This ARTICLE will give you tips on using external HDD's with video editing. Though I have 3x internal SATA HDD's in my laptop, I still rely on FireWire 800 (IEEE-1394b) externals, and they work well. Using eSATA would be even better. For more info on the I/O sub-system, see this ARTICLE.
    Good luck,
    Hunt

  • Jittery MC movement problem with AS 2.0

    Pardon me if this is a simple, obvious thing that I'm missing, but I'm out of options after searching all over the place for an answer. I'm having trouble with something that used to work fine for me in previous versions of Flash (MX and CS3), but now that I'm updating my website using CS4, I'm encountering a problem, that didn't exist before.
    I'm trying to slide a movie clip that contains buttons horizontally at varying speed based on the distance from the middle of the screen. Everything worked fine when I did it years ago, but the movement of the sliding MC now is very jittery. Even old versions of my website when loaded into CS4 appear jittery even though they didn't years ago.
    I tried everything I could think of....
    1. increasing the fps from 30 to 60 or higher
    2. publishing at various settings: player version, AS version, hardware acceleration, etc.
    3. placing all images/MCs on round numbers instead of floats
    4. changing the _quality setting to "BEST"
    So I boiled the problem down to its most basic element, I took everything out and created a single MC with two images on it moving to the right via onClipEvent in the following code embedded in the MC:
    onClipEvent(load) {
    _quality = "BEST";
    onClipEvent(enterFrame) {
    this._x +=2;
    Both images and the MC are on round numbers and the _x increment is a round number: 2. 30 fps, published as Flash 8, AS 2.0, saved as a CS4 .FLA document. Image smoothing is on.
    Here is a link to the exported sample:
    paullewis.us/test/index.html
    If you watch the clip, wait until the photos go out of frame... at some point, the movement will be jittery.
    Any help would be greatly appreciated. I have some nice, new photos I'd like to add to my site and this problem is driving me crazy! Thank you.

    kglad,
    I'm seeing the same hesitating horizontal movement on your clip that I'm seeing on mine.  I checked using Firefox and IE, and am running both on 64-bit Windows 7 with the most recent Flash version (10.1.102.64).  I thought that it could be some issue with my video driver/card/settings so I also checked my .SWF on a Windows XP machine and saw the same jittery movement.
    When you view your clip, does it appear 100% fluid, no hestiation?
    Thanks!
    Paul

  • UILoader Component's coordinate( Movement) problem

    Hi All
    In my program I am allowing user to drag and drop Video
    thumbnails on the main stage. The UIComponent is loading external
    SWF as soon as user drops video on the main screen. Also the user
    can successfully drag and drop the opened video pane (which is
    UILoader Component) wherever he wants on the screen.
    My problem is that when user drop the UIComponent on the main
    screen, the dropped UIComponenet moves little bit from the mouse
    position.
    I used the code that on
    stopDrag,UILoader.move(MouseX,MouseY). But it did not work
    because the stage is taking UILoader's top left corner as MouseX
    and MouseY and move UILoader's top left corner to the cursor
    position. I came up with tricky solution in which I use on
    stopDrag,UILoader.move(MouseX-200,MouseY-200). This solution
    was little better in my case but that's not exactly what i want
    because this solution is giving inconsistent and inaccurate
    results.
    Does anyone has better solution? I just need that if user
    stops dragging the UILoader Component , the Component should be
    placed on the coordinates wherever he/she left the mouse cursor.
    I will appreciate any kind of help
    Thanks a lot.
    Anuj

    Dear Jeevan,
    I assign one operation to external processing by control Key - PP02.
    When i create production order , PR is generated for the external operation.
    In this when , i see COOIS report at component level , qty withdrawn  shown as zero.
    But when i relesae PR to PO for the external opertaion , there is qty shown  in  qty withdrawn column  ( Same as qty required ) ?? in COOIS report.
    But i have not issue any qty, than why there is qty shown in qty withdrawn column.
    Regards
    Vin

  • Movie problem

    Ok I bought The Dark Knight off of itunes, and i want to put it on my ipod. This is the first movie i have bought off of itunes. How come the movie wont download to my ipod touch??

    ok cancle this i found my problem and it was pretty simple!!

  • Avi, mpeg and mov problems

    I`m having no luck playing streamed .avi, mpg and .mov ( all video) files.
    The avi and mpeg video files freeze up upon start up and only show the first second of the video for the first 5-10 minutes. After that they play fine although with no sound. They also play and sound fine after being downloaded and then opened.
    The mov files only show the sliding bar or , after being saved , the blank QT screen with the bar sliding and no sound.
    Also , the QT "intro" on apple.com/quicktime (the timberlake video) refuses to play properly, it just comes in very "blocky" with only occasional sound bits getting through. The same can be said about some avi files, when they do work.
    I have flip4mac , divix, 3vix, xvid installed. Tried perian but that completely killed all streaming avi playback , just a Q with ? mark. Downloaded AC3 codec and put in the QT folder. no luck.
    These are the sites in question.
    http://www.justintimberlake.com/QuickTime/justintimberlakeqt.html
    http://www.geocities.com/Heartland/Prairie/1568/videos/riki_discovers.mov
    Couldn`t find any avi movies to use as an example.
    Last question. Is there a way to automaticaly stream avi and mpg files in the same QT screen as wmv and asf files?
    thank you and sorry about the long post.
    imac intel core2duo   Mac OS X (10.4.8)  

    Try VLC media player regarding playing .avi files.
    ===============
    I had no problems playing the Timberlake video. However, when I tried to play your second link (.mov) all I got was the bar, no audio or video.
    Regarding your 1st link, have you tried repairing permissions & restarting?
    Regarding your 2nd link: Apparently, it's a bad video link & no fault of yours or your computer.
    ====================
    "Is there a way to automaticaly stream avi and mpg files in the same QT screen as wmv and asf files?"
    The following is a work-around for .avi files. Not sure if it will also work for .mpg files.
    Open the file with QuickTime Player.
    Open the Movie Info window (Command-i).
    Note the name of the video codec used in the file.
    Do a Google.com search for codec name +Mac and download one appropriate for your OS and computer.
    Quit and relaunch QuickTime after installing the new codec.
    Try the file again.
    Thanks to QuickTimeKirk for the above info.
    ================
    Regarding no audio sometimes................
    If repairing permissions does not work, then try the following:
    KB article - No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
    Another trick: If you have GarageBand installed, open it and then quit.

  • YouTube Movies Problems? Clear Cache & Cookies

    When you hit a link to a YouTube movie on the iPhone, it will open the movie in mobile Safari. Movies wouldn't play and I got a black blank movie on the page with an error message saying that I needed to download Flash. This error message seems to be inaccurate. I fixed the problem by clearing cache and cookies in Settings/Safari. I don't know why that fixed it but not having Flash had nothing to do with why the movie wouldn't play - at least that's the way it appears to me. The error response from mobile Safari is just wrong. Note that the same movie played OK on the mobile YouTube app, but email links to YouTube don't call the YouTube mobile app
    Also, Apple's mobile YouTube app "Sharing" function is limited and doesn't tap into the real power of YouTube sharing (Facebook, Twitter etc.). It only allows you to share by sending the link in an email. This makes for a lot of extra work to share a video to friends. Perhaps they'll expand the sharing function in a future update to the app.
    It would also be nice in the future if you could set preferences for hyperlinks to call an app other than Safari - i.e. a link containing "YouTube" would call the mobile YouTube app, rather than Safari
    Like I said, I don't know why clearing cache or clearing cookies fixed the problem, but it seems like a problem that could be fixed. The desktop Safari doesn't do this

    I just noticed that YouTube links in email do open up the YouTube app. Prior to clearing cache and cookie the links were opening up Safari.

  • Mailbox Move Problem

    Hi,
    I need mailbox move between 2 exchange 2013 mailbox server. But we receive an error message and failed job. Status datail StalledDueToWriteUnknown. how to correct this problem ? thank you.
    New-MoveRequest -Identity "user1" -TargetDatabase "Mailbox DataBase05" -BadItemLimit 300
    [PS] C:\Windows\system32>Get-MoveRequestStatistics -Identity user1
    DisplayName               StatusDetail              TotalMailboxSize         
    TotalArchiveSize         PercentComplete
    user1                     StalledDueToWriteUnknown  1.704 GB (1,829,622,48...                         
    20

    Hi,
    Does this issue only occur when migrating the user1?
    In order to narrow down whether it is an issue with the user mailbox, please create a test mailbox and try to move it for a test.
    If this issue occur to all the users, I suggest we first temporarily disable the “health check” service, raise the baditem limitation to 999.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Crystal Reports Server 2008 Trial Installation Problem

    I recently downloaded the trial version of Crystal Reports Server 2008 and ran into a problem with the installation key code sent to me.  During the install, I enter the keycode and the install application says it is invalid.  I'm attempting to install the Linux version on Red Hat Enterprise 5.2.  I know that this is technically not a supported version of Linux but I would not expect that cause a problem with the  key code.
    Does anyone have any ideas on what is happening?
    Thanks...

    Hi Jeff,
    I would suggest you to install Crystal reports on supported platform only.
    To narrow down the issue you can try to install on other machine with supported environment so that it would be clear that the issue is with Keycode or not.
    Regards,
    Shweta

Maybe you are looking for