Pe PC has been corrupted (error 92h)

Hello Team, i have an HP ProBook 4530S running windows 7 pro 64bit. It has HP protect tools and the Harddisk encrypted. Recently the hard disk got issues and can't boot windows. The error message is "pe PC has been corrupted (error 92h)". I have read many forums but haven't got a successful remedy. Is there anyone who has successfully overcome this? i really need my data on the hard disk

Take a read of this thread. You are not alone.
Some people make the mistake of using a third party disk encryption utility and get that error message..
What exactly do you mean when you say "hard disk go issues"? Be very specific in your description.
Recovery chances are quite slim and will be very expensive. There are companies that specialize in this. Search online to fnd them.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:

Dear Friend
I have got below error message in the exchagne server 2013 while i tried to open the console of delegation mailbox . It was comes once i was deploy lync server 2013 in the same forest.
warning
The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control entry defines the ObjectType 'd819615a-3b9b-4738-b47e-f1bd8ee3aea4' that can't be resolved..
The access control entry defines the ObjectType 'e2d6986b-2c7f-4cda-9851-d5b5f3fb6706' that can't be resolved..
If you feel to ask to more clarification, please let me know.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Based on the description, you got warnings when you tried to click the mailbox delegation option of mailbox properties in EAC. Is it right?
Did this issue affected only one user mailbox or all of them?
From the error message, it seems that this issue is related to the corrupt permissions. Please use the
Get-MailboxPermission cmdlet to retrieve permissions on a mailbox to check result.
Best regards,
Belinda Ma
TechNet Community Support

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

Roxio Media error "the certificate file is missing or has been corrupted."

Hi, ive had my blackberry since earlier this year. I am now getting an error message when i try to open up media manager. I am getting an error which states: "the certificate file is missing or has been corrupted." can someone help me figure this one out???? Thanks

Hi and welcome to the forums!
See if this helps!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01035760&lc=en&cc=us&dlc=&product=3435326
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

HT5313 I can't get 10.7.5 to download. Have gone through "Software Update" several times and each time error messg suggests perhaps the file has been corrupted when downloading. Current OS=10.7.4 Thoughts?

I can't get 10.7.5 to download. Have gone through "Software Update" several times and each time error messg suggests perhaps the file has been corrupted when downloading. Current OS=10.7.4 Thoughts?

Try downloading from here. http://support.apple.com/kb/DL1583
Message was edited by: hpr3

TS1372 My 3rd generation ipod is frozen and i dont know why. iTunes says it has been corrupted and has has assigned it with a 1418 error. How can i fix this?

My 3rd generation ipod nano is frozen and i don't know why. iTunes says it has been corrupted and has has assigned a 1418 error code to my problem. how can i fix this?

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

The Docfile Has Been Corrupted

When I tried to open my .fla file in flash mx 2004, I
received the error message "The Docfile Has Been Corrupted". Is
there a way to recover this file and what caused the problem?
Thanks in advance.

I doubt it.
Dan Mode
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
"memaat" <[email protected]> wrote in
message
news:e694l7$j7o$[email protected]..
> When I tried to open my .fla file in flash mx 2004, I
received the error
> message "The Docfile Has Been Corrupted". Is there a way
to recover this
> file
> and what caused the problem? Thanks in advance.
>

The docfile has been corrupted : Windows 7 + CS 4 FLA

There seems to be an issue w/ Windows 7 + CS4 FLA files where
some don't open with the error "The docfile has been corrupted".
The same FLA opens fine in Vista or OSX on the same machine &
other machines. Any ideas on how to fix or work around this would
be greatly appreciated!

I've received these errors as well, and yes, of course Adobe
won't offer solutions to the problem yet since Windows 7 is in
BETA. Here's a simple explanation of a beta release:
"The beta version of a software release is considered to be a
preview. It sometimes has all the standard features, but is not yet
ready for wide release or sale. During this point, the company will
collect feedback from users about the product's usability —
what they like and what should be changed — before the
product's wide release."
So, it would be in all of our best interests to send feedback
about this issue directly to Microsoft through their "send
feedback" link that appears on every window in the beta OS. When
the OS releases, that's a whole new story if the error still
occurs.

I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

I cannot sign in to the App Store.
I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
I''m completely blocked. I cannot procede without being able to update my software.
Please help me.
Rhea

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

Error changing modules | Lightroom

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

There has been an error creating the personal site. User cannot be found

Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
There has been an error creating the personal site. Contact your site administrator for more information.
Event Viewer is showing :
My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
Below are the DLL versions of my installation.
Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
Please suggest.
Thanks in Advance

Please note for future reference that you should only ever post any one question ONCE.
Posting it twice means that there are parallel threads and peoples time is wasted.
Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
You should not in any case add new questions to existing threads and especially not to old, closed, threads.
I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
Moderator pre-2010 forums
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

When user click "My Site clicking My Content states: There has been an error creating the personal site. etc

Hello community
    Using Sharepoint 2010 Server and the UI on its intranet there is a My Site. After creating the My Site the user account that created the intranet easily can create it's My Site, My Content and My profile. But when I logon as
a user
when I try to create the My site I get an error stating" "There has been an error creating the personal site. Contact your site administrator for more information". In the Event viewer log pasted below it says: A failure was encountered
and User cannot be found. So I check the UPS Synchronization and I can find the username in UPS "Manage User Profile" and I can logon with the username I just can't create the My Content after clicking My Site. The funny
thing is if I click My Profile the My Profile page appears (although it is a one-way trust relationship if I use "Check Names" when I try to "Add User" to a group an error message appears stating "No match found. etc). So the
question is how come the account that created the intranet can create
My Site and create My Profile and My Content but if a regular user account logs on and clicks My Site, My Profile and get a page but clicking My Content produces that error that says: "There has been an error creating the personal site. Contact
your site administrator for more information". (Note: The output from Event Viewer is posted below)?
    Thank you
    Shabeaut
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Portal Server
Date:          7/24/2014 4:51:42 PM
Event ID:      5187
Task Category: Administration
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      <ServerName>.<FullQualifiedDomainName>
Description:
My Site creation failure for user '<DomainName>\<UserName>' for site url 'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure
was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Portal Server" Guid="{8b3ddd3d-2b09-4669-bf81-e2d6921feeea}" />
    <EventID>5187</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-24T20:51:42.494Z" />
    <EventRecordID>33776</EventRecordID>
    <Correlation ActivityID="{BC4FAAA6-FA5B-4309-8C2E-0639F5BAC567}" />
    <Execution ProcessID="9600" ThreadID="9520" />
    <Channel>Application</Channel>
    <Computer><ServerName>.<FullQualifiedDomainName></Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0"><DomainName>\<UserName></Data>
    <Data Name="string1">'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'</Data>
    <Data Name="string2">Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid)</Data>
</EventData>
</Event>

Make sure you enable self service site creation on the MySite web application via CA
http://technet.microsoft.com/en-us/library/cc261685(v=office.14).aspx
You mentioned trusts and people picker. I am having a bit of trouble understanding the exact issue here, but is the issue also coming up that the user in question cannot be found with people picker?
searchadforest setting to make sure SP can reach to trusted domains to find users.
"When a Web application uses Windows authentication, People Picker searches all two-way trusted forests and all two-way trusted domains. However, if you want to search from a one-way trusted forest or a one-way trusted domain, you must run the
setapppassword operation, and then run the peoplepicker-searchadforests
property."
http://technet.microsoft.com/en-us/library/cc262051(v=office.12).aspx
http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

HT5318 Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?

Ever since I updated what looked like iTunes 10.6.1 my computer has been corrupted with Malware, which has filled up all available space on my hard drive. What do I do to get rid of the Malware?

First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

Pe PC has been corrupted (error 92h)

Similar Messages

Maybe you are looking for