PE10: AVCHD burn to DVD error

I am trying to burn a DVD image to a folder in AVCHD format & after the burn 99% complete a little message appears under the complete bar that says just error.
No files are in the folder. No other indication or suggestions appears.
Does the AVCHD to DVD work.?
How should I proceed?

What model of camcorder is your original video coming from and what format and resolution is it?
When you started your Premiere Elements project, which settings did you select? You can see your project settings under the Edit menu.
Have you ensured that you have the latest version of Quicktime, per the program's requirement, and that the program has been registered and activated?

Similar Messages

Burning a DVD - error message

I get the following error message when I attempt to burn my DVD:
"There were errors during the project validation that have to be fixed before burning the project."
I am not sure what I have to do to correct this.

Did you already read this procedure?
http://boinx.com/fotomagico/support/tutorials/dvdtutorial/#basics
http://cdn3.libsyn.com/cmeermann/TC008-Fotomagico.mov?nvb=20081115183200&nva=200 81116183200&t=0cdc802f2dff2cfd746f9
From iDvd's Help Menu:
Each iDVD theme comes with a specific style of menu buttons, but you can customize them in several ways. You can give the buttons a shape to which you can add video clips, images, or even slideshows. You can change the typeface, size, style, and color of the button label text. You can also create buttons without a label or buttons that are text only. You can even make each button that appears on a menu different by mixing styles for an interesting visual effect.
Message was edited by: SDMacuser

Having trouble burning a dvd - error message.

I recently bought a 2009 macbook on ebay, and when I tried to burn a dvd, it didn't work and would scratch up my discs. I informed the person I bought it from, and they were nice enough to replace the drive. I just got it back in the mail and have been trying to burn dvds, but I keep getting an error message when using Toast version 10 and also trying on Toast 8 that says:
The Drive reported an error;
Sense Key = Medium Error
Sense Code = 0x02
NO SEEK COMPLETE
It will start burning on and then when writing the lead out on toast 10, it gives me an error, and that was the error message I caught when I tried to burn using toast 8. With toast 8 it barely started before that message came up. I have been trying with Sony DVD-R discs that I am able to use on my mom's iMac from 2008. I'm confused; should I try a different kind of disc?

Welcome to discussions.
Be certain to use good DVD media.
You may want to try using Verbatim or Maxell DVD-R 4X.
Also, save the project as a disk image and burn it as slowly as possible with either the disk utility or Toast™.
Sue

Burning to DVD error messages

FCP gives error message "the video file is incompatible" when attempting to burn in share menu - works when burned in compressor - tried emptying out the render cache and re-render still same error, any clues why?

Please confirm that you are running the ancient OS Panther 10.3 and which version of iDVD you are using.
It sounds as if your system is in need of serious repair, but firstly: how much free space do you have on your hard drive?

How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC. In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:". I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive. I disabled the virtual CD and rebooted. This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn. I tried the burn again and the DVD burner was no longer recognized.
I then removed PE13 and reinstalled it - no errors during the install. Tried again and same result - no DLLs.
Any help would be greatly appreciated.
Thanks for your time,
Mark

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

Trouble burning a DVD using AVCHD format

I recently completed about a 19 minute video project (photos and short video clips), and I was able to burn it to a DVD at standard quality using Premiere Elements 10. When I try to burn to AVCHD, though, I get an error just before it's ready to start burning. It encodes all of the media and just switches to the Burn menu when "Error" pops up. There isn't any other explanation. I've also tried to burn to a folder and I get the same result.
I've used Premiere Elements 10 for 4 years doing this same type of project, and I've been able to burn to AVCHD successfully in the past. Any ideas why it's no longer working?
Computer specs: Dell Inspiron 3847 desktop, i5 processor, 12 GB RAM, 1 TB hard drive w/ 770 GB free.
I appreciate any help.

crusader28
Premiere Elements 10 Windows 8.1 (assumed 64 bit). Just to get it out of the way...what video card/graphics card does your computer use? If NVIDIA GeForce, please stop and let us know immediately.
Have you found that this issue is confined to this particular project with its particular Timeline content? Can you start a new project and get a successful
burn to AVCHD format on DVD disc with the same or other Timeline content?
Let us go through the drill of deleting the Adobe Premiere Elements Prefs file, and, if that does not work, then the hold 10.0 Folder in which it exists.
Local Disc C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
10.0
and in the 10.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 10.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives enabled so that you can see the complete path cited. The path to Folder Options starts with File Explorer in Windows 8.1 64 bit.
Depending on your answers, this issue may take us into a deeper look into the Timeline content construction. But, the answers will be in the details. Let
us see what they tell us.
Thank you.
ATR

"Internal Software error: %0, line%1" when burning to DVD

I recently upgraded my Premiere Elements 8 to 10 on my Dell laptop running vista. I have a 24 minute slide show with some video clips in it and a menu. I can output to avi, etc but cannot burng a DVD. Everything looks normal until it gets to 99% of the burn then I get the error "internal software error: %0, line%1" and my DVD is ejcted and I have to cancel out of the burn process. I've read various other similar problems on here but with slightly different error messages. I've tried outputting an avi file, importing it and burning to DVD from that but get the same error message. Any ideas?

duuneistein
I do not work for Adobe, nor am I affiliated with it in any way. No relatives there either. I come with no bias in my remarks to follow.
I have Premiere Elements 11 on Windows 7 and 8.1 64 bit and decided to take a look at what you feel is a bug in Premiere Elements 11 when it comes to burn to disc DVD-VIDEO on DVD using MPEG2 and .mp4 source files.
I took 1920 x 1080 @ 29.97 progressive frames per second (AVCHD.mp4) and 1920 x 1080 @ 29.97 interlaced frames per second (MPEG2.m2t) into a Premiere Elements 11 NTSC/DSLR/1080p/DSLR 1080p30 project, added menus, and did a burn to disc NTSC DVD-VIDEO Widescreen on DVD-RW disc. The total duration of the Timeline was 5 minutes. And the burn dialog presented with
Space Required 375 MB and Bitrate of 8.00 Mbps.
I used Premiere Elements 11 on Windows 7 Professional SP1 64 bit for the above test. That computer has 8 GB of RAM installed and has about 900 GB of free hard drive space. The computer used an internal LG Blu-ray DVD burner for the burn to.
I have never run into this "error internal software error: %0, line%1" in any version of Premiere Elements on Windows XP 32 bit or Windows 7, 8, or 8.1 64 bit in the past or tonight when I did this test.
Whatever you are encountering I cannot confirm the built in existence of a Premiere Elements 11 bug in this regard. This would suggest to me that you should consider looking outside of Premiere Elements software as the cause target. If you would like me to cross check those MPEG2 and .mp4 sources that were involved in this error "internal software error: %0, line%1", I would be glad to do that for you if you send sample via a Dropbox link posted in your thread.
But I suspect the answers are in the Windows Vista on which you are running Premiere Elements 11 or perhaps on some incompatibility or resource considerations between Windows Vista and Premiere Elements 11 (for that matter any version beyond your Premiere Elements 3.0/3.0.2). Unfortunately I do not have Windows Vista to incorporate into the testing. Do you have access to a Windows 7 or 8 computer?
ATR

Error 0x800703EE on Win 8.1 machine when I tried to burn a DVD.

Hello,
I have below mentioned error when I tried to burn a DVD on my HP laptop.But same file can be copied to the USB drive without a problem.Can I have a solution for this ? Thanks in advance.
Error message : Error 0x800703EE : The volume for a file has been externalley altered so that the opened file is no longer valid.
Note : Win 8.1 - 64 bit

I have sorted out above issue by disabling the defender and Fire wall.Cheers ! :)

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
Thanks

Try using a different brand of DVD's.

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said "ERROR IN PROJECT

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said
"ERRORS IN PROJECT
There were errors during the project validation that have to be fixed before burning the project."
What does this mean and how do I fix it.
jim

Hi
Do You have a NEW Mac ?
Does it really have iDVD ? New ones Don't.
Please tell much more
• Mac used
• Program used (versions)
• Material used (Codecs, file formats etc)
Yours Bengt W

Why do i keep getting error message while burning a DVD using iMovie footage?

I made an iMovie, loaded it into iDVD, watched it on my MacBook, tried to burn it and received an error message along the way saying that it couldn't continue. Another pop-up simultaneously said that I had to choose a source for my blank DVD-R. What am I missing?

How did you load it into iDVD?
The recommended way is to
1) in iMovie, use the Share menu to SHARE/MEDIA BROWSER in Large Size.
2) Open the Media Browser in iDVD (at lower right) and drag in the movie you just shared.
3) Set up any menus and such and burn your DVD.
Is that what you did?

Error-29, Cannot burn a DVD or save a disc image from within FCPX using Mountain Lion

Really stumped on this one.
Running Mountain Lion, freshly downloaded version of FCPX, on a 2009 MacPro with 16 G RAM.
Trying to share a 4 minute movie I edited.
- No problem exporting as a quicktime move...worked fine
- Big problem trying to either burn a DVD, save a disc image, or export to an Apple device.
The progress bar gets about 90% complete, and then it stops and a message window comes up that says:
There was an error burning your disc. The operation couldn't be completed. (DSPPublishing error-29)
Thoughts?

From Crash Analyzer:
DSPPublishing error -29 (Final Cut Pro X)
This error can occur when burning a disc if your menu has incompatible assets.
Suggested Actions
If your menu has a background image, make sure the image is not too large. Try reducing the size of the image and saving it as a JPEG or PNG.
Report generated by Crash Analyzer in Pro Maintenance Tools

When i go to burn a dvd, it gives an error message "menu duration exceeds 15 minutes." how can i fix this??

When I go to burn a dvd, imovie displays an error message, "menu duration exceeds 15 minutes. How do I fix?

You may have too many chapters (scene selections), or perhaps one or more of the menus are looping for too long. Each menu in its standard form generally runs for no more than 30 seconds before repeating. In any of the menus have you inserted your own music that runs for a much longer duration? If so, using the Inspector, reduce the music time to 30 seconds (there is a slider you can adjust).
Regarding chapters - how many do you have in the project? You may need to delete some markers in your iMovie project. In most of the iDVD themes each scene selection page allows up to 6 scenes. So, for example, if you have 50 scenes marked, the theme would require 9 scene selection pages. I really don't know what the maximum is, but clearly you've run over the 15 minute limit for the iDVD menus. It may be a combination of too many chapters and music looping for too long on one or more of the menus.
John

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

PE10: AVCHD burn to DVD error

Similar Messages

Maybe you are looking for