PE10:How can I limit  a transition to just part of the video

I want to limit the page peel transition to affect the portion of the video screen that depicts a screen showing a slide presentation. The slide show does not show up on the video, so I have to overlay the screen with images from the slide show & want the transitions to affects just that part of the screen.
I can’t seem to limit the transition with a matte.

Great news!
That is sort of like the workflow in PrPro, where one would create a Sequence (think of a mini-Project, in a Project), then edit with the desired Transition, and then Nest that Sequence into a new one, where the PiP would be created from it. In PrE, there are no Sequences, so no Nesting, but you got around that by editing in a Project, then Exporting/Sharing, to then Import into another Project. More than one way to "skin a cat."
Steve G. always has some great workflow modifications, to get most things to work in PrE. Those suggestions are always greatly appreciated.
Good luck,
Hunt

Similar Messages

  • How can I Publish to a Folder just one of the several websites I have created using iWeb?

    How can I Publish to a Folder just one of the several websites I have created using iWeb?
    it drives me nuts having to emove all the other websites when I want to upload one. 
    Sparrow

    For iWeb, I like to do only one site per domain file.  I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
    I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
    iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
    Here are a few of my iWeb sites:
    http://www.newcovenant.org
    http://www.visionmultimedia.org
    http://www.visioncomsolutions.com

  • How can I limit Bridge searches to just image names?

    I'm new to CS5 and use Bridge a lot.
    The problem I'm having is that it seems very difficult to limit the images to just the artwork I'm looking for.
    When I type in almost any name, the Mac OS will bring up dozens of related files for every sort of OSX segment file.
    I only want Bridge to show images.
    It seems that in trying to narrow down the choices, the settings are a bit arcane.
    When I create a search for document type, there are about 200 arcane sorts to weed out... with photoshop appearing about three screens down the list.
    Is there any way to limit the searches to just photoshop .psd and .jpeg files?
    Thanks!

    Thanks!
    I wonder if there is any way to save these basic search parameters, so one doesn't have to go through all that trouble for every search?
    If not, I'd say Adobe really dropped the ball on this one, effectively undoing the simplicity in favor of too many bells & whistles... imho.
    I find myself just going to the Mac OS finder to search file names, since the Bridge search is so arcane.
    IF there was a way to save the basic search for images (as opposed to coming up with every single related name on the entire computer), that'd sure make things quicker.
    jn

  • How can I sort a colum for a part off the sheet? Not for the entire shett!

    I only want to sort a part of the sheet. If i sort the colom it always takes the hole sheet. How can i only sort a part of the sheet. Please help me!

    Guido,
    It is not possible to sort just one column of a table, independent of the other columns.
    The solution is to pull the column you wish to sort out of the table, sort it, and put it back into the table.
    To remove a column, Click on the column label to select the entire column. Then grab the title and pull up and away from the Table and drop it on a blank area of the Sheet. To put the column back into the table grab it by the title and hover over the main table, moving slowly until a double vertical line appears where you want to place the column, and let it drop there.
    Jerry

  • How can I disable a PCI or USB device (including the video card)?

    Hi
    I'd like to save some power and reduce the heat of my fanless barebone (an atom-based arctic mc001, see here;
    http://www.amazon.fr/gp/product/B005DL6 … 5DL6V8G%22
    It consumes 25W idle, and gets a bit hot.
    So I'd like to disable some of the devices I don't use.
    For instance:
    - the internal wifi dongle (appears in lsusb)
    - the internal TNT tuner (appears in lsusb)
    - the internal DVD drive
    - the internal radeon graphic card
    For all of these devices, I do a "echo 1 > unbind" in sysfs, for the correct devices.
    After that, all these devices seem 'disconnected' IE they no t not appear anymore in lsusb or lspci (for the radeon)
    I also put the USB ports in 'auto' power mode
    After that, the devices do not generate any IRQs or wakeups anymore, according to powertop...
    But the power consumption does not decrease a lot... less that 1W...
    So I wonder if the fact to unbind the devices really disconnects them or not.
    Especially for the radeon... shouldn't I underclock it as much as possible instead? If so, how?
    Thanks for your help.
    Eric

    I can't really help you much but to give you a warning. underclocking/undervolting too much can damage a video card without your knowledge, if your going to underclock it make sure you do stabilty tests. Your also gonna need it for any graphics environment you may want if your processor doesn't have one, unless your going command line only. you can try seeing if disabling it with rf-kill does anything.  you can also use iwconfig to turn on power saving on your wifi-card, and try adjusting your cpu scaling as well. logically I would'nt worry about  the dvd if heat is our concern a dvd drive in standby is proably not going to be throwing off a lot of heat or use very much power.. the big players are probably going to be your cpu, gpu and maybe that wifi card I know when mine is in use it just drains the battery with out power-saving. as for the tuner I have no idea. I hope this post can give you some ideas and maybe move you in the right direction. I can't garentee that all of this is accurate, some of it is logical assumptions. just trying to throw out some ideas to help a fellow arch -linuxer

  • Why can't I rotate just part of my video in iMovie 11?

    I recorded a video on my iPhone 4S and part way through someone turned it around.  I have uploaded it to iMovie 11, hoping I can rotate just part of the video that was turned the wrong way, but I can't find a way to do this, as it rotates the entire clip.  Surely there is a capacity to select part of the video and rotate just that?  Any help appreciated.

    split the clip into 3 parts
    cmd-shift-S
    turn the seperated part .....

  • How can i make a transition between clips on cutaway?

    how can i make a transition between clips on cutaway?

    ninafromlisboa wrote:
    But if I want ONLY fade out (or in) I can't do it...
    OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
    BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
    John

  • How can I limit the number of emails retained on my ipad air?

    How can I limit the number of emails that are retained on my iPad Air?  Because of legal requirements of a long-term project, I cannot permanently delete emails relating to that project from my ISP's mail server.  My gmail account contains over 17,000 emails and, upon setting up my new iPad, and updating to ios 7.1.1, I now have all 17,000+ emails taking up space.  I would like to limit the emails by count as I was able to do on my old iPad running ios 5.1.1 OR to retain them based on date range.  I have not found any instructions on the support discussions or general iPad blogs that allow me to do that.  Any way around this problem?
    I also miss the 5.1.1 mail search feature that allowed me to narrow the search by from/to/subject/all.  Does anyone know if that feature is available using some little-known ios 7.1.1 feature?
    Thanks for your help.

    jlfcba wrote:
    IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info.  There is nothing in iTunes relating to such an option either.  So, it seems I'm back to square one.
    If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
    If you have Gmail it does not.  Quite right. Gmail is rubbish.

  • HT2729 I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

    I have limited space on my new ipad. How can I limit the number of songs from my itunes on my imac from going to my ipad when I connect the two?

    you can do this by keeping the external hard drive connected and doing the following
    -hold shift key down on computer while opening iTunes and a prompt will appear to choose a library
    -select choose library, iTunes should bring up your explorer windows where you can search for the external HD
    -after you find the external HD find the iTunes folder you just copied to it
    -after opening the iTunes folder look for the file that says iTunes library.itl or if you can't see that extenstion just look for a document looking thing in the iTunes folder that shows up as a database file
    -double click the database file and boom iTunes should load your library without having to copy it to the computer
    PS: do make sure that if you are going to do it this way, make sure that the external HD is connected at all times, because if you don't then you will get exclamation marks next to your iTunes songs
    double PS: if you are unsure how to find out if the iTunes library file is a database file just right click it and choose properties and under the type it should say database file
    hope this helps:)

  • Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

    Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

    You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

  • How can I limit numeric codes in a text field?

    How can I limit numeric codes in a text field? For example I want to list Industry SIC codes and I want to block someone from inputting an exlcuded industry code.

    We don't offer that type of input restriction for a text field. 
    Can you create a list of all allowed codes and use a Drop Down menu or Single/multiple Choice field? 
    Thanks,
    Josh

  • How can I limit the number of rows returned by a select stat

    How can I limit the number of rows returned by a select
    statement. I have a query where I return the number of stores
    that are located in a given area.. I only want to return the
    first twenty-five stores. In some instances there may be over
    200 stores in a given location.
    I know is SQL 7 that I can set the pagesize to be 25....
    Anything similiar in Oracle 8i?
    null

    Debbie (guest) wrote:
    : Chad Nale (guest) wrote:
    : : How can I limit the number of rows returned by a select
    : : statement. I have a query where I return the number of
    : stores
    : : that are located in a given area.. I only want to return the
    : : first twenty-five stores. In some instances there may be
    : over
    : : 200 stores in a given location.
    : : I know is SQL 7 that I can set the pagesize to be 25....
    : : Anything similiar in Oracle 8i?
    : If you are in Sql*Plus, you could add the statement
    : WHERE rownum <= 25
    : Used together with an appropriate ORDER BY you
    : could get the first 25 stores.
    Watch out. ROWNUM is run before ORDER BY so this would only
    order the 25 selected
    null

  • How can I limit the number of ros in TextArea?

    As I turn on the line wrap and having used setRows method,
    I cannot limit the number of rows of the textarea into 2.
    How can I limit it?
    Thanks.

    camickr wrote:
    I give up. You don't know specify requirements and I'm not going to prompt you every 5 minutes for more information.
    due to setText method So this implies that the text comes from somewhere, maybe a database, but the user does not type the text directly into the text area.
    If you define the text area with 2 rows, then the third row will not be visible, so I don't see the problem. Just don't add the text area to a scroll pane and the user will never know the third row is there.[http://i188.photobucket.com/albums/z55/nwoedf/temp/error.png ]
    it demonstrates the problem with excess line
    The third row is still visible even I have used setRow(2).

  • How can I limit the number of emails resident in Apple Mail?

    How can I limit the number of emails resident in Apple Mail inbox?

    jlfcba wrote:
    IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info.  There is nothing in iTunes relating to such an option either.  So, it seems I'm back to square one.
    If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
    If you have Gmail it does not.  Quite right. Gmail is rubbish.

  • With the new IOS7 I get every email in my inbox. How can I limit to the last 50 like it was before the upgrade?

    With the new IOS7 I get every email in my inbox. How can I limit to the last 50 like it was before the upgrade?

    You can set the pref <b>browser.urlbar.formatting.enabled</b> to <i>false</i> on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

Maybe you are looking for