PE11 crops as it prints pictures. Why?

PE11 crops as it prints pictures. Why?
I use 4x6 paper to print. When PE11 shows the thumbnail on the preview screen prior to printing the whhole picture is there. But the output
shows cropping which spoils the composition of the picture I took. I tried fooling the system by saying that Iwas using 3x5 paper and the whole picture was there but of course there was lots of white space around it. What can I do to get ariound this problem using 4x6 pper?

Use the crop tool. Enter the h & w in inches (4x6 or 6x4 depending on orientation), drag out the crop shield, then crop.. You need to do this before sending it to the printer.
Note: It is desirable to have the resolution in the 240-300 px/in range for printing. For web work, 72 px/in is ok.
Another thing, be sure to select the proper paper option in the print dialog, 4x6 vs. 4x6 borderless.

Similar Messages

While printing, why does PE11 crop the out put?

While printing, why does PE11 crop the out put?

Did you crop the photo to the same aspect ratio as your print size? If not, then the software will crop it for you.

Bug in CS3! When I tilt-crop a picture, the result is a distorted picture, why is that!?

Bug in CS3! When I tilt-crop a picture, the result is a distorted picture, why is that!? The pictuer gets squezed togeher and faces look markably thinner.

Hi again,
CS3 is a wonderful program. But behaves strange some times.
As it is now I first need to rotate the picture "ctrl+T" before the croping occure to get the portions right. I thought that if I, can, rotate the crop tool it, should, be possible to do this operation in one step. But not. Or? Okej, the operation may work in one step, but the result is horrible. What am I doing wrong?
Thanks for a quick reply!
Regards
/e

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ?

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ? Use the same printer with a PC and printed the same picture files- they are printed with high quality- Why can't the IMAC do the same?

Does this involve iPhoto for the Mac?
How exactly are you printing these photos?
LN

Why do I get a darker printed picture than what I see on the screen of my iMac

why do I get a darker printed picture than what I see on the screen of my iMac

Because your screen is calibrated incorrectly? Because you are using an Adobe RGB color profile instead of the recommended sRGB? Because your printer is not working correctly?
With no information other than "it does not work" guesses are all that one can provide
What set up do you have? What color profile are you using? How is your screen calibrated?
What else can you tell us?
LN

When I crop picture (no constraint), choose print, can print picture 4 x 8

When I crop picture (no constraint), choose print, paper and print size, can print picture 4 x 8 for instance, if choose smaller will cut off part of picture. How do I tell iPhoto that I want the whole picture in smaller size? If I crop with specific size, the same thing happens. Help - what I am missing?

Two choices - crop the photo to the print size (4x8 in your example) and print it selecting that print size on the first print window
Or Print and on the first print window after making the selections click customize and right click on the preview and select fit to frame - this will print the entire photos with white space fill on the sides needed to fit
Other than that your question is not clear - if this does not explain then please ask the complete question again with details and complete sentences
LN

White areas on screen, are pink after printing! why?

Can anybody help me?!
When taking a passport photo, with white background, I noticed that the background comes out pink when printer. Why is this?
We changed the height of the back light and miraculously this helped. But why? What was causing the whit area go pink?
At another ocassion, normal portraits taken with a white background. We selected the edges and deleted any color, to soften the edges. When we recieved the photos from the printer, the edges had light pink strips all around it. Is there an explanation to this?
I hope my description of the problem is clear enough.
If anyone has any knowledge to this problem. Please, help.

Here is an exampel of the problem I'm talking about. On this photo, you can't see the stripes, but once printed, all around the edges will apear light magenta lines.
Is calibrating the only reason why the white areas of a picture come out pink when printed onto paper?
Any technological answers as to why it does this? Why a light magenta shade instead of say....green? Or why does it give a color at all when on the screen it's white and as I've used the delet button to get rid of edges, shouldn't it be colourles?
This hasn't happened before but can it be that the printer somehow tryes to fill out the blancs by adding color to the deleted areas? I've used levels before to "add" white to the edges instead of "deleting" and I've not had this problem of light magenta stripes.
Any input?

Missing files.. ( pictures) why am i getting this message every time i try to open a pic.. JUSTY downloaded PSE12

missing files.. ( pictures) why am i getting this message every time i try to open a pic.. JUST downloaded PSE12@

Hi,
When you are looking at the small pictures in the organizer, you are seeing the thumbnails that were stored within the organizer catalog when you first imported them into the organizer. When you first imported the files, the organizer saved the location of that file and the pointer to the thumbnail. When you try to edit or print the image, the organizer can no longer find the image at the stored location - the file is missing.
You might like to read through this to see if it helps explain things to you
Photoshop Elements (PSE) knowledge base.
The changing drive letter is the most common cause when images are stored on an external drive.
I'm not sure what you mean about when you say "did not go back into categories like I had them on version 7".
If you updated to version 12 from version 7 on the same PC, there was no need to move any of the images so they should be in the same folders as before. The catalog should have been converted for you (if you allowed it) and so all your albums and tags should have been preserved.
Brian

Print pictures borderless ?

how can i print pictures borderless in iphoto (marginlesss)?

Check your print window for paper sizes available:
Click to view full size
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

How can I print pictures direct from my camera?

How can I print direct from my camera? This printer does not have any ports for accepting the card from the camera as my old photosmart printer did.

Hey rmg111!
What kind of printer are you using? Most of our newer printers still have memory card readers which would allow you to print pictures directly from the printer. If the printer truly does not have the memory card readers (some of them don't), then you would need to use a computer to transfer the pictures from the memory card before printing them.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How do I print pictures? HP PhotoSmart plus e all in one B210

I have been trying to print pictures off my Android phone and my computer and no luck! I got one off the computer but it printed of regular paper instead of the photo slot even though I chose the photo slot... It keeps saying that my email was discarded because it looked like spam or was corrupted when sending it from my phone. What am I doing wrong?

Hi TequilaRose7,
Sorry you are having trouble. Photos that are less then 100 DPI will be discarded with ePrint. Some Android phones default camera settings are less then 100 DPI. These settings can be changed for future photos taken with the phone in camera settings. (Increase the resolution) I think the HP ePrint Home and Biz App may work well for you. Download from the Android Market. Click here for more information on this free App.
Although I am an HP employee, I am speaking for myself and not for HP
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accept as Solution"

Colors don't match when printing pictures on J4860 all-in-one

When I print pictures, the colors are not true. It doesn't matter what software I use, but usually it's Photoshop CS3. I thought it was my monitor - that I wasn't seeing the true colors in my files. But I've been able to verify that the colors on screen match the subject in the photo. The prints from the HP J4860 do not match the screen images. I currently have new ink, and they are new HP cartridges, not generic or refilled cartridges, but this has been a problem through many ink cartridge replacements.

Hi there.
I don't know if there is much we can do to improve your output. First off, I want confirm you are using an OfficeJet J4680. We don't have a J4860.
Could you post an image that is unsatisfying, and let us know what you dislike? I'm going to involve a color expert here, and he'll look to see if we can do anything.
regards, CF
I work for HP and hope to make your day Sproutastic!

I am using iphoto 6.06 for my intel imac. I have been trying to print pictures from iphoto and i keep getting a message that states " the picture you are trying to print is in the iphoto library" what can i do to be able to print a photo from iphoto

I am using iphoto 6.06 for my intel imac. I have been trying to print pictures from iphoto and i keep getting a message that states " unreadable file: the following file could not be imported. the file is in the iphoto library folder" also when i try to print a picture from iphoto i get a message that says "no page was selected"
not sure what happened but i can pnly print when i drop the photo onto my desktop as an 8.5 x 11 size picture and i am trying to print 4x6's

Since the new library gives you the same message log into another user account on your Mac and see if you can run iPhoto without getting that message. If you get that message there also a reinstall of iPhoto seems indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all available updates to it.

IPad recognizes my hp wireless printer but doesn't print. Why?

iPad recognizes my HP wireless printer but still nothing happens when I press print. Why?

If your using the option at the top next to the address bar to print, that the box with the arrow, that only looks for airPrint printers. That will not work on your printer.
They do however have apps that allow you to print to your printer, you just need to get one from the app store (read the reviews before downloading the app).
I use the app "print n share" but I can't recommend that one or say its good or bad, it works for whati need it for that's all. You would need one that does what you need and works for you, that's why I say to read the reviews.

PE11 crops as it prints pictures. Why?

Similar Messages

Maybe you are looking for