PE3: Hangs when starting to burn DVD

Hi
When burning DVD, at the final stage, after encoding successfully, consistently fails to start to burn. Unable to stop by " Cancel" Have to "end task". When hanging, CPU is spending 50% running PE3.Opening and closing DVD drawer to possibly raise an interrupt didn't help.
I have searched extensively the various help areas and I think I have done all I can. See below. This is a third of a video which is a mixture of slides and short video clips. The other two work fine. They are all about the same length ( 20 mins). The video is fully rendered.
Environment
XP
Dual core 3G cpu
3G Ram
Cleaned up and just defragged C drive, 50% of 160G free, and 50% of 0.5Tb external hard drive.
All software up to date
No other activity at all on system
Tried straight after system restart
I am aware I could use the AVI route bur when I did this I didn't get the initial menu screen.

Steve
Steve
Thanks again.
I checked and when I made it before, it was by "Export movie" route to folder as AVI and then reimporting that to Timeline in a new project,which I found somewhere in Help. That route missed off the Menu.But it did work otherwise.If all else fails I will have to stick at that .
BUT this morning I tried the Burn to Folder option in Burn DVD window(not quite same dialogue as you said) This also hung after about half the time, having done the encoding Ok. Again no error, and couldn't "Cancel" had to end task. And again 50% CPU to Adobe.Looked identical to when trying to do direct to DVD.
Also when it hung trying to burn directly, the DVD was " being used by PE" as I checked by trying to do things to it from Control panel( format)
Chris

Similar Messages

  • PE3 crashes when I click "burn dvd". Any help, please?

    Hello. My PE3 works just fine, except for one problem, that has plagued me for some time. When I finish editing, then complete the menu (title) page, I click "burn dvd". Invariably, PE closes. When I re-open the project and redo the menu- the forced closure didn't save the menu- it works fine, every time. I tried saving the project and re-opening before burning, but it doesn't seem to help. I'm running XP, Service Pack 3, with 2.80 GHz and 1 Gig of ram. Any help would be appreciated.
    Chuck

    Just a guess...
    Premiere Elements http://forums.adobe.com/community/premiere/premiere_elements
    Premiere Elements Update http://www.adobe.com/support/downloads/product.jsp?product=101&platform=Windows

  • Itunes 10 Hangs When Started On Windows 7 Ultimate 64 bit - Sp1 Beta 178

    Hi
    Itunes 10 hangs when started on Windows 7 Ultimate 64 bit - Sp1 Beta 178
    I have tried following things :
    -Scanned for Virus + SpyWare
    -Scanned for Corrupted System Files
    -Scanned for Errors in registry
    -Cleaned up items that startup with windows
    -Installed latest Ati Catalyst 10.8 Drivers
    -Checked settings in Itunes Version 10
    My Mobile Model :
    Apple Iphone 3gs 16 Gb
    My Hardware and software :
    HP Pavilion m9660sc PC
    Intel Core I7 980X 3.33 Ghz
    DDR3 PC2-8500 6 Gb Memory
    HDD WDC WD10EADS-65L5B1
    DVD-RW TSSTcorp TS-H653Z
    LG L225WT Size 22 Screen
    AMD Radeon HD 4850 1 Ghz Memory
    Mainboard Pegatron Intel X58 Express
    Windows 7 Ultimate 64 bit
    Windows 7 Service Pack 1 Beta 178
    Adobe Reader 9.3.4 - Norwegian
    Spotify Version 0.4.7
    Microsoft Security Essentials 2.0 Beta
    Personal Ancestral File 5
    Java(TM) 6 Update Version 21
    Google Sketchup Pro 7.1
    Google Chrome Version 6.0.472.53
    Tales Of Monkey Island Version 2.0.0.0
    Kai Anders Wold - [email protected]

    Here is the latest update :
    Removing Microsoft Security Essentials 2.0 Beta fixed the itunes 10 hangs.
    Kai Anders Wold - [email protected]

  • RAC hangs when starting or stopping 2nd instance of 2 node RAC

    Has anyone seen the problem with all transactions and/or logins hanging when starting or stopping the 2nd node of a 2 node RAC database. When I shut down the 2nd instance using srvctl I occasionally get errors and long delays connecting. On our larger database with instances having a very large SGAs, trying to connect you sometimes get ORA-12537 or ORA-01033. Users experience a very long hang before getting the errors. These instances have very large SGAs of about 30GB on each node.
    In the log of the first instance we see messages like the following for quite a while.
    Global Resource Directory frozen
    Communication channels reestablished
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Mon Jan 8 06:59:08 2007
    LMS 1: 0 GCS shadows cancelled, 0 closed
    Mon Jan 8 06:59:08 2007
    LMS 0: 0 GCS shadows cancelled, 0 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Mon Jan 8 06:59:23 2007
    LMS 0: 20740 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 1: 20744 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 0: 20882 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:23 2007
    LMS 1: 20627 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:24 2007
    LMS 0: 20781 GCS shadows traversed, 4001 replayed
    Mon Jan 8 06:59:24 2007
    Thanks in advance.

    I have tested with only one node and starting and stopping is much faster without any cache fusion traffic. The application is not RAC aware, it was written without regard for RAC. As you say there may be some accessing of the same block by all nodes causing RAC to remaster blocks when a node is shut down.
    My concern is the length of time users are afftected when I am starting a node that has been offline for a while. With the large SGA I have, it appears users are affected adversely for several minutes, in affect causing an outage which we are trying to avoid by using RAC.

  • Firefox hangs when starting, Firefox window title bar says "Firefox (not responding)". (was: Firefox crashes)

    Firefox hangs when starting, during session restore. Uninstalled then installed new Firefix. Same problem. Firefox window title bar says "Firefox (not responding)". It just hangs, won;t display even one page. What to do? Tried -safe-mode, smae result.

    I keep too many tabs open and whilst trying to download a pdf file Firefox 8.01 hung and when I restarted it the Embarrassing page opened. I knew which tab I needed to delete but as soon as I tried to navigate to the errant tab it said "Not Responding" and nothing I could do would make it respond. I tried command line opening in safe mode and the same thing happened.
    I have read the other posts but cannot send a crash dump as it is "Not Responding" and does not get far enough to crash.
    IanH

  • Error when trying to burn DVD

    Hi
    I get this error (repeatedly) when trying to burn DVD recently.
    Error code 0x80020022
    Burning disc failed because communication to the disc drive failed.
    It's self explanatory I know, but what am I supposed to do about it? Is it a problem with my hardware?. I can't see the icon for my disc drive in Disc Utility to check it.
    I've shut down and restarted, tried different DVDs, they're all DVD-R although I did try at first with a DVD +RW and hope this hasn't caused some damage.
    Hope someone can help thanks.
    I'm having loads of problems creating iDVDs as well. But I think I need to resolve issues one at a time....
    Helen

    Hi Helen - here are some general purpose iDVD tips that may address some of your unspecified troubles. In terms of communication troubles, could your hard drive be going to sleep, or screensaver kick in and interrupt the process?
    General tips:
    Do something small first; get some experience before you need to do a big project.
    Lots of memory helps; and you'll need 10-15 gigs of space on the hard drive for scratch space.
    Buy good quality disks - I've seen recommendations for Maxell, Sony, TDK and a few others based on testing. I primarily use the first two and usually don't have trouble.
    Give yourself lots of time.
    Turn off your screen savers and energy savers; don't let your hard drive go to sleep.
    Get your computer healthy and ready for some heavy lifting. (video work could be the hardest job your computer can do) MacJanitor and Apple's DiskUtility's Repair Permissions is my routine.
    Most of the time iDVD is working, it is encoding (compressing) your video to fit on the DVD. Create an image .img file (patchburn for iDVD 4 and older) and use Toast or Disk Utility to burn it to disk. Burn slow (1 or 2x) and let it cool down.
    I keep my projects under 60 minutes (for highest resolution).
    Try testers; you can use DVD-RW
    I import into iDVD rather than export from iMovie (fewer errors).
    No other apps open.
    Let it encode and burn while you go to bed; it can take awhile, esp. on older Macs. Don't quit iDVD even when the DVD is burned, until you've played the DVD in a regular player (it's much easier to burn another disk and check to see if the problem was a bad disk, than to go back through all that encoding again by quitting iDVD).
    John

  • FF hangs when starting up

    FF hangs when starting up; error message Process: firefox-bin [1036] Path: /Applications/Firefox.app/Contents/MacOS/firefox-bin Identifier: firefox-bin Version: ??? (???) Code Type: X86-64 (Native) Parent Process: bash [970] Interval Since Last Report: 1304 sec Crashes Since Last Report: 1 Per-App Interval Since Last Report: 0 sec Per-App Crashes Since Last Report: 1 Date/Time: 2012-02-06 10:21:47.854 -0800 OS Version: Mac OS X 10.5.8 (9L31a) Report Version: 6 Anonymous UUID: 00AE1616-697F-4365-AFF4-0979E3DD1691 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dyld Error Message: unknown required load command 0x80000022

    Sorry, I do not use or ever heard of "freehand MX". All I can tell you is to make sure it is compatible w/your current OS & to post in the Adobe Forums since it is an Adobe product.
    "also if i could ask what cable would i need so i can get my emac talking to my imac, for transfering files etc."
    See Knowledge Base Article - http://docs.info.apple.com/article.html?artnum=25575 Mac OS: Moving files from your older Macintosh to a new one
    Also, if you have a High-speed connection, the easiest & fastest way is through AIM (AOL Instant Messenger).
    iChat has the same ability of transferring large files as AIM.
    http://docs.info.apple.com/article.html?artnum=150934
    Adium
    YouSendIt to email the files to yourself.

  • PS Hangs When Starting

    PS hangs when starting by clicking icon on Windows 8.1 Pro Taskbar: Grayed Welcome screen with nothing clickable. If open any image any format only one layer called "Index" is locked and cannot unlock. Under Layer menu only one submenu available and that is "Layer Style..." and when that is hovered only one option is available and that is "Global Light..."
    Is this some psycho religious fanatic virus? What is going on?

    Maybe a Preferences reset will clear it up.
    Start Photoshop and very quickly hold down Ctrl-Alt-Shift. When the "Delete Photoshop Settings File" dialog appears, release those keys and click "yes" and let Photoshop finish loading.
    You have to be quick with those keys, so it may take a few tries.

  • SAP system hang when start the addon.

    Dear Expert,
    I just upgrade one of the SAP B1 server from 2007A to SAP B1 8.8 PL15, everything going smooth both server and clients.
    Except one client (new laptop with Win 7 Pro x86), this laptop fail to start the addon.
    Others clients with same specs Win 7 Pro have no problem to start addon.
    Addon started manually.
    After click start button for that addon, the system hang. If without the addon system working fine.
    If anyone have ideas to check much appreciate and thanks in advance.
    Regards,
    Mat

    Hi Bala,
    I did try your steps, but no luck. System still hang when start the addon.
    But, I can start SAP addon , example i try Screen Painter, and can start successfully. Only our addon cannot start.
    I'm not suspect our addon because others client working smooth, even the server also working fine.
    I did re-install DIAPI, even re-install SAP client a few time, but still fail to start addon (delete SAP client folder before install).
    Any one face this problem?
    Regards,
    mat
    Edited by: Mat Mat on Apr 21, 2011 10:43 AM

  • So aslmanager taking 99% and Console.app hangs when started

    So aslmanager taking 99% and Console.app hangs when started
    anybody know why aslmanager needs 99% of CPU and 2+ GB footprint?

    ok, i found a solution that worked for me. this may or may not be the problem you are having but give this a shoot. i think in my case the asl database got corrupted. unline tiger and below this database is not stored in asl.db in leopard. in leopard, the entire /var/log/asl directory is the database. so to remove the database and start from scratch, you need to
    sudo launchctl stop com.apple.syslogd
    sudo launchctl stop com.apple.aslmanager
    sudo mv /var/log/asl/* ~/tmp (you might as well use rm but i wanted to be safe)
    sudo launchctl start com.apple.syslogd
    For good measure I also ran the maintenance scripts:
    sudo periodic daily weekly monthly
    My machine has been dead quiet for hours now. darn, it's back to the kitchen for making my toast.
    so, what did we learn? Mac, PC - same thing; both are great until you have problems. only with pc's you have a lot more resources to tap into...
    Cheers,
    Haje

  • DVD player hangs when I insert blank DVD

    When I insert a DVD into my Mac Pro, the DVD recorder/player stops working!! I have to reboot my machine and it starts working OK. This is happening more and more often. Any Idea why and how to solve the problem?

    I have a 2 month old iMac and yesterday it stopped accepting DVD/CDs.  Don't know if that's what you meant by "hangs".  If I restart my computer, the DVD/CD will work and I can insert/eject normally.  I have a trouble call into Apple.  They're supposed to call me in a couple hours.  I'll let you know what happens.

  • Photoshop (CS3) Hangs When Started

    I just purchased PS CS3 and after spending an entire evening and morning getting to the point where the software asked for my serial number, I still have not gotten anything other than a PS window and an hourglass cursor with the window indicating that Adobe Photoshop CS3 is not responding. I am running Windows XP with all the Windows updates installed. I get the same result with the version right off the DVD or after having dowloaded and installed all the updates to the various components. I did many installs finally using the CS3 cleanup script at level 3 and this allowed me to enter my SN.
    If I look at the application event log in XP I can see the following:
    Hanging application Photoshop.exe, version 10.0.1.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
    I looked through the forum and did not see the exact problem in other posts. Is there a switch that can be used with Photoshop.exe to log the application startup?
    Any help would be appreciated. I am starting to think I made a terrible mistake buying this software based on using an older version years ago.
    Thanks,
    John

    I am also trying to install CS3 on my computer and I have the same problem. I am using Windows Vista. After installing, the application hangs also just as described. I have contacted customer service who told me to uninstall and reinstall. I did and it continues to hang when opening. I contacted customer service and they told me to uninstall and reinstall. Did so and it hangs.
    Several customer service of uninstall, download CS3 from website, and still hangs.
    After several days I was referred to technical support, they had me uninstall and reinstall. The application still hangs with technical support on phone. After 2 hours on the phone, we were still creating new users, uninstalling and reinstalling, changing msconfig and still hanging.
    Finally I was told by tech support to uninstall and reinstall again but you guessed it, it was close to closing for tech support and was told I would have to call back.
    Waited until Saturday and you guessed it, tech support is only available Mon thru Friday. I have to work to pay for programs like this and can't take off during the week right now to spend all day with tech support.
    I never saw and answer to the post as to what steps to take to correct it from hanging.
    anyone else have same problem or can resolve it?

  • "Medium Write Error" when trying to burn DVD

    i have recently been receiving the message "medium write error" every time I try to burn a DVD in my mac book pro 13 inch  It doesn't matter which program I use to burn, they all give me the same (or similar) message. I also tried booting into Windows and burning from there using ImgBrn it and it was
    succeed
    the program went from "preparing disk" to writing to  "finishing", ejected the disk and made the usual error and it looks like it don't start writing as when i put the dvd back the dvd is still empty
    I used to burn these disks perfectly well with no problems, before i install lion i don't know if this is lion problem or what
    i also tried to attempt to reset the PRAM.  by holding down CMD+Option+P+R while booting MBP and waiting until it chimes a second time to let go of those keys.i haven't changed anything so don't understand why the error occurs. I've bought a lens cleaner disk and ran that for 2-3 minutes and repaired permissions on the HD but that didn't work either. The drive works flawlessly reading DVDs and CDs with no problem no problems.
    any one can help please ????

    mortiis Empire wrote:
    I also tried booting into Windows and burning from there using ImgBrn it and it was succeed the program went from "preparing disk" to writing to  "finishing", ejected the disk and made the usual error and it looks like it don't start writing as when i put the dvd back the dvd is still empty
    Sorry, I'm afraid I don't understand this.
    It doesn't matter which program I use to burn, they all give me the same (or similar) message.
    The problem is that it's not relevant if the programmes use the same burn engine (eg, iTunes and Finder). You need to test apps which do not use Apple's burn engine, eg, cdrdao, cdrecord, Burn, LiquidCD, Disco, Roxio Toast, NTI DragonBurn, etc. But, FWIW, my bet is not on a software issue.

  • Encore CS5 freezes when starting to Burn project

    Hi,
    My CS5 Encore works fine until I "Build" or "Burn" a project. It prepares the files successfully for burning but as soon as it physically starts to burn to disc, it only goes up to 7.82MB exactly everytime and then it never finishes the burning. The DVD continues to spin but nothing happens and then I have to restart my PC (Windows 7). I've tried to run Encore as Administrator but it doesn't work.
    Any help will be GREATLY appreciated!
    Jaco

    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
    Encore "No Drive" Error http://forums.adobe.com/thread/569230?tstart=0
    Things and Software to AVOID when authoring/burning a DVD
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941?tstart=0
    Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)

  • Windows 2003 R2 Server hangs when starting Oracle 9.2 service

    Hi,
    I've been having an error with an Oracle 9.2.0.7 installation where the server will hang to the point where it needs to be powered off as it is completely unresponsive. It hangs when I start the Oracle service.
    I've tried installing the system from scratch a few times(OS, OS patches, Oracle 9.2, Oracle 9.2.0.7 Patch set, Database) a few times however I keep having this same issue issue. I had the system running properly up until yesterday and I thought the issue was SP2 for Windows 2003 as I didn't patch the OS before installing everything however it is happening again now.
    The listener is started and I can't even connect to an Idle instance through SQLPlus when this happens. I just get a TNS Listener error which I will list below. SInce this keeps happening, I'm wondering if it may be a hardware issue (Installed on an HP ML350) but I'm also wondering if it may be SP2 for WIndows 2003 server and was wondering if anyone else has seen this issue. I havne't found anything in the forum nor on Google so I thought I'd post here.
    Here are the last entries in the DB log when it hangs;
    ARC1: Archival started
    Mon Mar 10 14:18:59 2008
    ARCH: STARTING ARCH PROCESSES COMPLETE
    Mon Mar 10 14:18:59 2008
    ARC0: Becoming the 'no FAL' ARCH
    Mon Mar 10 14:18:59 2008
    ARC1: Becoming the heartbeat ARCH
    Mon Mar 10 14:18:59 2008
    ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
    Mon Mar 10 14:18:59 2008
    ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
    Mon Mar 10 14:19:00 2008
    Oracle Data Guard is not available in this edition of Oracle.
    Mon Mar 10 14:19:00 2008
    alter database mount exclusive

    Hi,
    Since the server locks up when the service is starting, it's hard to determine how high it gets but after it starts, it quickly gets up to around 277MB and just stays there.
    I was thinking it may be a memory issue as well as it displays the symptoms of a "light speed" memory leak. I had 4GB of memory in the server and realized that WIndows 2003 only saw 3.5GB so I decided to remove 1 GB but that didn't make a difference.
    How would I go about ensuring that the memory consumption on my DB server does not get swapped much?

Maybe you are looking for