PE3 installs on Vista 64; nothing runs beyond splash screen
I'm trying to install Premiere Elements 3.0 on my new Vista 64-bit machine. Nothing happens once the splash screen disappears. Here are the details:
- The PC has 4G RAM, full system updates applied, etc.
- I installed, in order:
- Quicktime
- PE3
- PE 3.0.2 update
I checked Event Viewer. Everythng had installed correctly, except Adobe Help Center (error 1063), so I ran the Help Center installer by itself (from F:\Premiere Elements\help center); this time, it installed correctly.
Unfortunately, running PE3 gets me nowhere. I get the splash screen (which indicates "v3.0.2" and "Windows XP; multi processor detected", a good sign). The last item displayed on the splash screen is "Loading Wave_Warp.AEX", then the splash screen disappears and... nothing.
Event Viewer shows no error message whatsoever. I also tried deactivating XP compatibility in the PE application's Properties -> Compatibility tab; same result.
What else can I do to make PE3 run on this machine? Many thanks for your help.
There is very likely to not be a patch, especially for a program that is several years, and versions old. No one at Adobe could anticipate, much less program for, a new OS, that is quite different in all respects from that which was available upon release of PE3.
Yes, it can be frustrating when either software, or hardware, are rendered obsolete, however it happens constantly, and will, so long as each gets changed to take advantages of improvements in technology.
In real world terms, PE7 is the current Vista "patch" for PE3. I'm using CS2 PrPro (Production Suite) on my XP-Pro workstation. I want to go to CS4, but to get the full benefit from it, I need to upgrade my workstation and go to Vista-64, or Win7, when released. Talk about an investment in both time and $'s.
For some older 3D paint programs, I had to build a special computer and use WinME, just to run them. Most of the gear was then state-fo-the-art, but I could only use 512MB of RAM, and had to install a much older (and pretty lousy) OS. I needed and used those programs enough to justify that expense. Heck, just getting a 512MB stick, at that late a date, was tough, but necessary.
Good luck,
Hunt
Similar Messages
-
Trial version will not run past splash screen
I hope someone can help please!
I downloaded the trial of dreamweaver 8 yesterday & I
installed it & ran just fine. Today it will not run past the
splash screen. It comes up & asks if I want to buy or carry on
the trial - I pick trial, and the dreamweaver 8 splash screen comes
up, and then nothing happens. The program doesn't start. I
uninstalled it & reinstalled. I re-booted etc. - still no go.
The other trial I downloaded (firestarter) works just fine still.
I am running windows XP media center edition service pack 2.
Can anyone help please?Has it ever run?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Janey_Mac" <[email protected]> wrote in
message
news:e6pv9b$sl9$[email protected]..
> I'm desperate!
> Can anyone help please?
> Macromedia does not provide tech support for the trial
version, but before
> I spend the money on the product I need to know that it
will work. Catch
> 22!
> -
Nothing displays on Splash Screen
Adobe DW5. The splash screen shows up but is blank - white. I reinstalled the Adobe Suite and still nothing. After opening, Splash screen shows but it is white. I did some research and some people noted flash wasn't installed because that is probably what plays it but I have flash installed, shockwave.
Any thoughts?Hi,
Try updating BIOS to the latest version and check if it helps. Else, it seems there is some hardware issue involved. I strongly suggest you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Can't fully launch beyond splash screen, corrupted database?
I'm using a MacPro with LR v1.2, OS v10.4.10. A few days ago, I got the spinning beachball while in LR, had to Force Quit. When I tried to relaunch, I could only get the splash screen and menu.
Each time I launch LR, I backup. Every other day or so I optimize the database from Catalog Preferences. I had added about 700 photos a few days earlier, for a total of about 8,700.
I've gone to the Adobe LR knowledge base, followed their instructions for going back to an earlier backup, but though I've gone back some days, one by one, from the day I had the problem I still only get perhaps one photo, the rest grayed out, immediately. If I wait some time, some previews will start showing up (so far for at least one folder of photos after perhaps 20 minutes).
Is it just a matter of waiting long enough for the previews to show up or do I have to go much further back in my backups to find one which will have all the photos show up right away (normal behavior)?This sounds very similar to problems we are having in the thread called "Lightroom no longer opens," http://www.adobeforums.com/webx/.3c0540fe/10
It might be worth it to try the solution that is described there, Especially since you have so many back ups. I have to finish some editing before I try it myself to restore my 65,000 image catalog. -
Installer for Adobe Reader 11 runs but nothing installs
Windows XP SP3 and IE8, Installer completes after downloading it, everything looks ok but nothing occurs after intsaller finishes, I see no Adobe Reader Intsalled on the progam list, nor are any existing PDF files recognized (asks for program with which to open them.)
Where did you download the app from?
http://get.adobe.com/reader/
First you download an app to download the installer of Reader, which then must be run to download the Reader Installer, which you need to run to install Reader. Hey, you cannot make this stuff up.
If you download from:
http://get.adobe.com/reader/enterprise/
You can the Reader installer, which you can run to install Adobe Reader. -
SOA SUITE installation in Vista
Hi
I am trying to install Soa Suite 10.1.3.1 in vista OS.
I get the following error
Checking OS versions: must be 5.0, 5.1 or 5.2 . Actual 6.0
Failed
But my colleagues are able to install it without any problem. ( in vista 6.0 )
Pleaes help me to resolve this issue
ThanksHave found 2 ways to get this working.
One is when installation fails, Vista pops up saying run with recommended settings.
Use that option and you will have the installation fireup for you.
But if that is not some thing that you see, then you should try the second option.
Go to the directory where you have your SOA install files.
Go into the directory install
Find a file oraparam.ini
You need to edit this file to fire up the setup.
You should find some thing like this there around line 37
*[Certified Versions]
#You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE
Windows=5.0,5.1,5.2*
Add anothe entry for 6.0 and fireup the setup.
The updated file should have
*[Certified Versions]
#You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE
Windows=5.0,5.1,5.2,6.0*
Be sure to follow all the pre-installation and post-installation steps.
If you don't you might face issues in setting up SOA.
I am still creating a blog of all the issues that I faced, or my friends faced and how I solved them.
Should find that some time soon.
Every Little Helps
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/ -
When I try to download iTunes 10.5, I keep getting the message "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." Therefore I can't update my iTunes to the new version. How can I solve this? I don't want to pay for technical support as this seems to be a problem with the iTunes package Apple is providing itself by that message.
Hello, hartadrian.
I would recommend attempting to repair the Apple Software Update via the steps below. Once processed attempt to download, update or install iTunes 11.
How to repair Software Update for Windows
http://support.apple.com/kb/TA24326
If you are still experiencing the issue, completely remove all components of iTunes in the order specified of the article below. Once this has been processed, attempt to download and install iTunes 11.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
If you experiencing errors when removing components of iTunes, follow the steps in the article below.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
I Tunes will not install. I get this error message: There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Does anyone have an answer?
TRy the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
I am trying to upgrade to itunes 10.5 on my pc which is using windows xp but i keep getting an error message stating that there is problem with this windows installer package. A pogram run as part of the setup did not finish as expected. Contact your suppor personal or package vendor.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I keep getting this message when trying to upgrade to Itunes 10.5.1
Driving me nuts trying to upgrade. What can I do to correct this?
"There is a problem with the Windows Installer package.
A program run as part odf the setup did not finish as expected .
Contact your support prersonel or package vender"Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?
Maybe you are looking for
-
A suggestion for all the people with panics and piix
Everyone may overlook this because it seems so simple of a possible fix. So I will try to explain why it may help. It has worked for me, and several others. My laptop uses this chipset, and so it intermittantly panics for me if I don't use this. My i
-
Problem in Jdbc connectivity with Oracle8i!!
can you tell me, how can i connect jdbc with oracle 8i. i written a connectivity code with oci8. here is that two lines. Class.forName("oracle.jdbc.driver.OracleDriver"); m_conn = DriverManager.getConnection("jdbc:oracle:oci8:@qit-uq-cbiw_orcl","scot
-
MAX function behaving strange...
I've been researching this for a little bit this morning, and I'm not finding a solution in searching. I have a simple problem that I'm sure is an easy fix that I'm overlooking. I have a small piece of code where I am trying to return some informatio
-
hi experts, I am uploading customer details from legacy file to SAP systems. Can I write single BDC program to change the customer details or else to create a new customer based on the customer number in legacy file.
-
Where to store a cryptographic key
Hello, I've used DES to chyper configuration files in my application, now I have to store the DES key in a safe place. The only solution i've found is to store if in the class that use that key but it seem an example of "Hard coding", what's the key