PE4 Error in trying to create slide show
When I try to create a slide show in PE4, I cannot add any photos to slide editor. I get 'slide show command failed. Unable to add photos from organizer'. There are pictures in the organizer. I have tried adding pictures from both the organizer and file folder and I still cannot create a slide show. Any suggestions would be most appreciated.
I tried as you suggested and that didn't work. When I am in organizer and select photos, then click on create, slide show, ok, the following message apears. 'Error code C0000005, Address 847606' and then element closes. If when starting elements and I choose create and then slide show and the editor comes up. I click on add media from either organizer or folders and select pictures I get 'Slide show command failed. Unable to add photos from organizer.'
I am using windows xp home and a vaio laptop. Anyone have any other ideas? TIA
Similar Messages
-
An error occurred while exporting the slide show
This error has been talked about ever since iPhoto 5. It is usually rectified by having a Movies folder in the home directory.
I have iPhoto 6.06 and am trying to export into iMovie 6.03. The exporting process goes through its paces but produces the error at the end. I do have a Movies folder in my home directory; the exporting process does even create a file called .mov in the Movies folder, and if I try to export again with the same file name it claims that the file exists, and do I want to replace it? Yet, Quicktime Player 7.4.5 cannot open it and claims that it is not a movie file. What is going on here? ANy help very appreciated.Hi Terence,
thanks for the fast turnaround. I had already trashed the com.apple.iPhoto.plist file several times before. I don't think the problem is with Quicktime, since the error message occurs in iPhoto. I checked Permissions; there were a few problems with Flash, which I corrected, but nothing with iPhoto or Quicktime. I tried exporting the slide show again and got this in the Console Log:
Permissions repair complete
The privileges have been verified or repaired on the selected volume
slideshow max texture size 1536
2008-05-26 19:40:32.746 iPhoto[275] Slideshow movie export failed with error code -47."
Unfortunately my MacBook is a work machine and I am not its administrator, so Icannot create a new account. This will have to wait until I get back into Uni this week.
By the way, iDVD imports the slide show correctly, but as far as I know I then cannot add commentary to it. That's why I want to go through iMovie, so that I can record my own voice commentary before it goes into iDVD.
If you have any more ideas let me know. Otherwise I'll see my administrator in the next days and hand the problem to her. I'll let you know th outcome then.
Matt -
I am trying to teach myself to create slide shows in Flash. I have Flash CS4 Professional. I found a tutorial to do this for CS3, Action Script 2.0, here:
http://previews.learnflash.com/previews/flash/basicslideshow.html
It seems like a great tutorial. However, as I am following it, I can't make my slide show work as the tutorial demonstrates. Specificall, after creating the buttons as shown, my slide show will not stop at the next frame, but rapidly runs through all the slides.
I have worked with the tutorial for several days and can not get it to work for me. I get the below error messages when I follow the turorial.
This is what the tutorial says to do, and as best as I can tell, I am doing just that:
This is what part of my screen looks like:
I would greatly appreciate any pointers, perhaps to a more current tutorial.
Many thanks!
christianThe first image you show is probably the most telling, especially if the second image you show is taken from the tutorial and is not a screenshot of what you've done. Based on the error messages, you are using parentheses where you should be using curly braces.
next_btn.onRelease = function(){
nextFrame();
Also, just for the sake of it, check your Flash Publish Settings and make sure you have AS2 selected for the Actionscript version. -
Premiere Elements 7 crashes on creating slide show
Hi Gurus,
I use Premiere Elements 7 for about 2 years and it works fine when I need to create a film from set of video fragments.
But I also need to create slide shows from pictires.
For some reason PRE7 crashs on building such slide show (at least, this is valid for a long enough slide show). It happens not always on the same slide, but approximately at the same percentage of the slide show to be built.
I run PRE7 on Windows XP, SP3 32-bit
What may be a reason of this crash? Conflict with some other software, installed on my computer? Lacking resources (I have 4 GBytes of memory, but Win 32-bit uses only 3.25 GBytes)? Known bug?
I tried to install the trial version of PRE9, but the result was even worse: it crashed even more quickly than PRE7. i.e. less slides were processed before the crash.
Any suggestion that can help to solve this issue will be appreciated.
Thanks in advance,
IliaIf you can handle smaller numbers of large images, but not larger numbers, it is likely a resource issue. It could be RAM, Virtual Memory, or similar.
This ARTICLE might be helpful for setting up your computer for an editing session, and freeing as many resources, as is possible. This ARTICLE discusses Virtual Memory.
PrE 9 will have about the same resource requirements, or might use a bit more, so a large number of large still images will remain a problem.
Good luck,
Hunt -
Best Adobe Product for Creating Slide Show
I'm trying to find out what is the best Adobe product to use to create slide shows? I have Photoshop CS2 and just got Premiere Pro (which I haven't used before).
Many options, it depends on what you want to do.
Premiere Pro can easily make a video that displays a series of images in turn, with optional transitions between them, but the viewer can't navigate around as they could with a PowerPoint file.
Later versions of Photoshop can also assemble still photos into a video sequence.
If you want to display the slideshow on a website, you're looking at an HTML/JavaScript solution.
Finally you can combine your slides into a PDF file and set it to full-screen mode with automatic timings. -
Error while trying to create tree using same EMP how to tutorial
Hi,
I get the following error while trying to create a sample tree similar to the one
posted in the how-tos web page.
The final query that creates the tree is also as follows
The Current Query shown in my apex window and the one on the howtos tutorial is as follows
select "EMPNO" id,
"MGR" pid,
"ENAME" name,
null link,
null a1,
null a2
from "RJOSEEMPCLUB"."EMP"
where DEPTNO = 1
The error is as follows
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Debug:
1: begin
2: wwv_flow_wiz_confirm.create_tree (
3: p_flow_id => :FB_FLOW_ID,
4: p_region_template => replace(:F4000_P112_REGION_TEMPLATE,'%'||'null%',null),
5: p_start_option => :F4000_P112_START_OPTION,
6: p_owner => :F4000_P112_OWNER,
7: p_table_name => :F4000_P112_TABLE,
8: p_id => :F4000_P112_ID,
9: p_pid => :F4000_P112_PID,
10: p_name => :F4000_P112_NAME,
11: p_link_option => :F4000_P112_LINK_OPTION,
12: p_link_page_id => :F4000_P112_LINK_PAGE_ID,
13: p_link_item => :F4000_P112_LINK_ITEM,
14: p_where => :F4000_P112_WHERE,
15: p_order_by => :F4000_P112_ORDER_BY,
16: p_page_id => :F4000_P112_PAGE_ID,
17: p_page_name => :F4000_P112_PAGE_NAME,
18: p_tab_set => :F4000_P112_TAB_SET,
19: p_tab_text => :F4000_P112_TAB_TEXT,
20: p_region_name => :F4000_P112_REGION_NAME,
21: p_tree_name => :F4000_P112_TREE_NAME,
22: p_tree_type => :F4000_P112_TREE_TYPE,
23: p_max_levels => :F4000_P112_MAX_LEVELS);
24: end;Hi Kart,
If you have the sample EMP table, the DEPTNO values are 10, 20 or 30.
Did you specify a root value for the tree?
Regards
Andy -
Error when trying to create a JCO Destination
Hi
I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
Error stacktrace:
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Any ideas?
Regards
Kay-ArneHi,
Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
Best regards,
Vladimir -
TypeError: Error #1007:Tried to create an instance in a no constructor
Hello guys,
Im stuck with actionscript error, i really need help here the error i got:-
TypeError: Error #1007:Tried to create an instance in a no constructor.
at Away3dScene/initObjects()
at Away3dScene/init()
at flash.display::DisplayObjectContainer/addChild()
at Away3dProject()
So use Away3d, however dont know really where is the error becouse every thing seems be okay, im using adobe flash cs5.5, flash player 10.
main.as code:
package
import flash.display.Sprite;
import flash.display.StageScaleMode;
import flash.display.StageAlign;
import net.hires.utils.Stats;
public class Away3dProject extends Sprite
public function Away3dProject()
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
var scene:Away3dScene = new Away3dScene();
addChild(scene);
var stats:Stats = new Stats();
addChild(stats);
and here Away3dscene.as:
package
import away3d.cameras.Camera3D;
import away3d.containers.Scene3D;
import away3d.containers.View3D;
import away3d.core.base.Object3D;
import away3d.core.clip.RectangleClipping;
import away3d.core.math.Number3D;
import away3d.materials.WireColorMaterial;
import away3d.overlays.LensFlare;
import away3d.primitives.Plane;
import flash.display.BlendMode;
import flash.display.Sprite;
import flash.events.Event;
public class Away3dScene extends Sprite
//[Embed(source="assets/library.swf", symbol="Halo")]
private var Halo:Class;
//[Embed(source="assets/library.swf", symbol="Flare1")]
private var Flare1:Class;
//[Embed(source="assets/library.swf", symbol="Flare2")]
private var Flare2:Class;
//[Embed(source="assets/library.swf", symbol="Flare3")]
private var Flare3:Class;
private var _scene:Scene3D;
private var _camera:Camera3D;
private var _view:View3D;
private var _flare:LensFlare;
public function Away3dScene()
this.addEventListener(Event.ADDED_TO_STAGE, init);
private function init(evt:Event):void
initScene();
initObjects();
this.addEventListener(Event.ENTER_FRAME, render);
private function initObjects():void
/*var floor:Plane = new Plane();
floor.width = floor.height = 100000;
floor.segmentsW = floor.segmentsH = 12;
floor.y = -3500;
floor.material = new WireColorMaterial(0x333333);
_scene.addChild(floor);*/
var flareSourceDummy:Object3D = new Object3D();
flareSourceDummy.x = 1000;
flareSourceDummy.y = 500;
flareSourceDummy.z = 3000;
_scene.addChild(flareSourceDummy);
_flare = new LensFlare(flareSourceDummy, _camera);
_flare.setBurnClip(_view);
_flare.setHaloAsset(new Halo());
_flare.addFlareAsset(new Flare1());
_flare.addFlareAsset(new Flare3());
_flare.addFlareAsset(new Flare1());
_flare.addFlareAsset(new Flare2());
_flare.useRotation = false;
//_flare.useAlpha = false;
//_flare.useScaling = false;
//_flare.useBurning = false;
//_flare.blendMode = BlendMode.SCREEN;
//_flare.burnMethod = LensFlare.BURN_METHOD_COLOR_TRANSFORM;
_view.addOverlay(_flare);
private function hoverCamera():void
var mX:Number = this.mouseX > 0 ? this.mouseX : 0;
var mY:Number = this.mouseY > 0 ? this.mouseY : 0;
var tarX:Number = 3*(mX - stage.stageWidth/2);
var tarY:Number = -2*(mY - stage.stageHeight/2);
var dX:Number = _camera.x - tarX;
var dY:Number = _camera.y - tarY;
_camera.x -= dX*0.25;
_camera.y -= dY*0.25;
_camera.lookAt(new Number3D(0, 0, 0));
private function initScene():void
_scene = new Scene3D();
_camera = new Camera3D({z:-1500});
_view = new View3D({scene:_scene, camera:_camera});
_view.x = stage.stageWidth/2;
_view.y = stage.stageHeight/2;
_view.clipping = new RectangleClipping({minX:-stage.stageWidth/2, minY:-stage.stageHeight/2, maxX:stage.stageWidth/2, maxY:stage.stageHeight/2});
_view.opaqueBackground = 0;
addChild(_view);
private function render(evt:Event):void
hoverCamera();
_view.render();
Please guys, any idea will be helpful to me.
Best,Yes, you right, now after i do what you explain appear more informations.
at Away3dScene/initObjects()[C:\Users\ahmed\Desktop\3d\Away3dScene.as:65]
at Away3dScene/init()[C:\Users\ahmed\Desktop\3d\Away3dScene.as:44]
at flash.display::DisplayObjectContainer/addChild()
at Away3dProject()[C:\Users\ahmed\Desktop\3d\Away3dProject.as:17]
error number 65 in Away3dScene is: _flare.setHaloAsset(new Halo());
error number 44 in Away3dScene is: initObjects();
error number 17 in Away3dProject.as is: addChild(scene);
and the last error is: at flash.display::DisplayObjectContainer/addChild()
But what is strange i test project at flash builder and he work fine, i just want move from flash builder to run in flash cs5.5, so i move Away3dProject.as, Away3dScene.as, and i add Away3d classes to flash cs5.5 and also add net class to flash cs5.5.
also i add all movies clips to my libriry project, please could you help me to find why i got this error with flash cs5.5.
Best, -
Error while trying to create a new company
Hey All
I found an error while trying to create a new company.
the Error like - No matching Records Found - [ODBC -2028]
This can generate only database but not any tables in that database.
Please help me.
Thanking you
Hepil DoshiHello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J. -
Non-sense error message trying to create view
Greetings All,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production on Windows 2008R2
I am getting an error while trying to create a view. The error makes no sense in that no attempt to change a user name or password as the error message being produced suggests.
I can execute the entire select statement fine, I get results back.
If I comment out the line indicated as being in error, the problem moves to the line prior to the one commented out. The 4 lines prior to the line indicated by the error message are similar. The error is occurring on the last of the 5 similar lines of code.
If I move all 5 lines further up in the code the error moves accordingly.
The function validate_number (near where the error is identified) under certain conditions will issue a execute immediate 'alter session set nls_numeric_characters = ''.,''';
The column number identified in the error message is 2 spaces prior to the validate_number function call.
Below is the syntax for the creation of the view, the error message is at the bottom.
The numbers to the far left indicate the line number. I put 2 blank lines before and after the line of code identified by the error message.
The error points to the 2-spaces in front of the VALIDATE_NUMBER function call on line 350. just before the sql code ==> validate_number(Spend_Qty,'')),0) <==
Thanks for your time,
Bob
CREATE OR REPLACE VIEW REPORT_STAGING_V AS
- SELECT
- SPEND_STAGING.INPUT_FILE_ID,
- SPEND_STAGING.SPEND_ID,
- SPEND_STAGING.SPEND_DOC_NUM,
- SPEND_STAGING.SPEND_DOC_ITM_NUM,
- SPEND_STAGING.SPEND_DOC_YR_NUM,
- SPEND_STAGING.ACCT_PYBL_INV_DOC_NUM,
- SPEND_STAGING.ACCT_PYBL_INV_FSCL_YR_NUM,
- SPEND_STAGING.COMPANY_CODE,
- SPEND_STAGING.ACCT_PYBL_INV_LN_ITM_NUM,
- SPEND_STAGING.SPEND_DOC_TYPE_CD,
- SPEND_STAGING.SPEND_MTHD_TXT,
- NVL(SPEND_STAGING.SRC_SYS_CD, '<BLANK>') SRS_SYS_CD,
- SPEND_STAGING.SPEND_SAVING_DT,
- SPEND_STAGING.SPEND_SAVING_FSCL_WK_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_MTH_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_QTR_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_YR_NUM,
- SPEND_STAGING.MTRL_GRP_CD,
- SPEND_STAGING.MTRL_GRP_DESC_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_1_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_2_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_3_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_4_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_5_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_6_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_7_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_8_TXT,
- SPEND_STAGING.GL_ACCT_NUM,
- SPEND_STAGING.GL_ACCT_DESC,
- SPEND_STAGING.COST_CENTR_CD,
- SPEND_STAGING.PRFT_CENTR_CD,
- SPEND_STAGING.FUNCNL_AREA_CD,
- SPEND_STAGING.PURCH_GRP_CD,
- SPEND_STAGING.PURCH_GRP_NAM,
- SPEND_STAGING.PURCH_ORG_CD,
- SPEND_STAGING.PURCH_ORG_NAM,
- SPEND_STAGING.REGION_CODE,
- SPEND_STAGING.VNDR_ACCT_ROOT_NUM,
- SPEND_STAGING.VNDR_CORP_NAM,
- SPEND_STAGING.VNDR_CORP_TICKER_SYMBL_CD,
- SPEND_STAGING.BUYPOINT_VNDR_ACCT_NUM,
- SPEND_STAGING.BUYPOINT_VNDR_FIRST_NAM,
- SPEND_STAGING.PAYPOINT_VNDR_ACCT_NUM,
- SPEND_STAGING.PAYPOINT_VNDR_FIRST_NAM,
- SPEND_STAGING.SPEND_PYMNT_TERM_CD,
- SPEND_STAGING.SPEND_PYMNT_TERM_DESC,
- SPEND_STAGING.SPEND_PYMNT_BSLN_DT,
-50 SPEND_STAGING.SPEND_PYMNT_CLRNG_DT,
- SPEND_STAGING.CONTRACTUAL_PYMNT_TERM_DY_CNT,
- SPEND_STAGING.VNDR_MTRL_NUM,
- SPEND_STAGING.MTRL_ID_1280,
- SPEND_STAGING.MTRL_DESC,
- SPEND_STAGING.BAT_NUM,
- SPEND_STAGING.SPCL_STOCK_IND,
- SPEND_STAGING.INVTY_MVMNT_TYPE_CD,
- SPEND_STAGING.GOODS_RCPNT_NAM,
- SPEND_STAGING.MFG_PART_NUM,
- SPEND_STAGING.PLANT_CD,
- SPEND_STAGING.PLANT_DESC,
- SPEND_STAGING.STORAGE_LOC_CD,
- SPEND_STAGING.STORAGE_LOC_DESC,
- SPEND_STAGING.UNLOADING_PT_DESC,
- SPEND_STAGING.PO_NUM,
- SPEND_STAGING.PO_LN_ITM_NUM,
- SPEND_STAGING.PO_LN_ITM_LAST_CHNG_DT,
- SPEND_STAGING.PO_DOC_DT,
- SPEND_STAGING.PO_TYPE_CD,
- SPEND_STAGING.PO_TYPE_DESC,
- SPEND_STAGING.PO_UOM_CD,
- SPEND_STAGING.PO_PYMNT_TERM_CD,
- SPEND_STAGING.ASGND_ACCT_CTGRY_TYPE_CD,
- SPEND_STAGING.PO_SHORT_TXT,
- SPEND_STAGING.GR_MTRL_DOC_TXT,
- SPEND_STAGING.ACCT_PYBL_INV_ITM_TXT,
- SPEND_STAGING.PO_RCPT_INV_HST_DOC_POST_DT,
- SPEND_STAGING.APPRTN_NUM,
- SPEND_STAGING.REQTN_TRK_NUM,
- SPEND_STAGING.REQTN_LN_NUM,
- SPEND_STAGING.REQTN_LN_ITM_NUM,
- SPEND_STAGING.REQTN_PERSN_ACCT_ID,
- SPEND_STAGING.NTWRK_NUM,
- SPEND_STAGING.NTWRK_CTGRY_CD,
- SPEND_STAGING.PROJ_NAM,
- SPEND_STAGING.WBS_ELMNT_NAM,
- SPEND_STAGING.CPTL_PO_IND,
- LU_GAC_STAGING.TIER_SUPPLIER,
- CASE
- WHEN SPEND_STAGING.PRCRMNT_RPTNG_LVL_3_TXT = 'GAC'
- AND LU_GAC_STAGING.PO_SHORT_TXT = SPEND_STAGING.PO_SHORT_TXT
- AND SPEND_STAGING.SRC_SPLR_NAM IS NULL
- THEN LU_GAC_STAGING.TIER_SUPPLIER
- ELSE SRC_SPLR_NAM
- END SRC_SPLR_NAM,
- SPEND_STAGING.TAX_CD,
- SPEND_STAGING.TAX_CD_DESC,
- SPEND_STAGING.TAX_JURISDICTION_TXT,
- SPEND_STAGING.MTRL_DOC_PRCS_UOM_QTY,
-100 SPEND_STAGING.MTRL_DOC_UNIT_OF_ENTRY_QTY,
- SPEND_STAGING.PO_LN_ITM_QTY,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_UNIT_QTY,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_USD_AMT,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_DC_AMT,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_BDGT_USD_AMT,
- SPEND_STAGING.PO_LN_ITM_TOT_USD_AMT,
- SPEND_STAGING.SPEND_USD_AMT,
- SPEND_STAGING.SPEND_DOC_CURNCY_AMT,
- SPEND_STAGING.SPEND_LOCAL_CURNCY_AMT,
- SPEND_STAGING.SPEND_BDGT_USD_AMT,
- SPEND_STAGING.SPEND_QTY,
- SPEND_STAGING.SPEND_QTY_UOM_CD,
- SPEND_STAGING.SPEND_UNIT_OF_ENTRY_QTY,
- SPEND_STAGING.SPEND_UNIT_OF_ENTRY_UOM_CD,
- SPEND_STAGING.SPEND_DC_FX_MTH_CNVRSN_FCT_VAL,
- SPEND_STAGING.SPEND_DC_FX_BDG_CNVRSN_FCT_VAL,
- SPEND_STAGING.CMPNY_LOCAL_CURNCY_CD,
- SPEND_STAGING.DOC_CURNCY_CD,
- SPEND_STAGING.TRANSTN_TYPE_CD,
- SPEND_STAGING.ACCT_ASGNMT_SEQ_NUM,
- SPEND_STAGING.GLPCA_LN_ITM_REC_NUM,
- SPEND_STAGING.PCA_REF_DOC_NUM,
- SPEND_STAGING.CO_DOC_NUM,
- SPEND_STAGING.CO_FSCL_YR_NUM,
- SPEND_STAGING.CO_LN_ITM_NUM,
- SPEND_STAGING.VNDR_REF_DOC_NUM,
- SPEND_STAGING.SAVING_MTHD_TXT,
- SPEND_STAGING.SAVING_CMNT_TXT,
- SPEND_STAGING.SAVING_COND_NUM,
- SPEND_STAGING.SAVING_COND_ITM_NUM,
- SPEND_STAGING.SAVING_COND_TYPE_CD,
- SPEND_STAGING.SAVING_COND_TYPE_DESC,
- SPEND_STAGING.SAVING_COND_CURNCY_CD,
- SPEND_STAGING.SAVING_COND_PRC_UNIT_UOM_CD,
- SPEND_STAGING.SAVING_COND_PRC_UNIT_QTY,
- SPEND_STAGING.SAVING_COND_RTE_USD_AMT,
- SPEND_STAGING.SAVING_COND_CURNCY_CNVRSN_VAL,
- SPEND_STAGING.SAVING_COND_CURNCY_BDGT_CNVRSN,
- SPEND_STAGING.PO_TRANSTN_COND_DC_AMT,
- SPEND_STAGING.PO_TRANSTN_COND_USD_AMT,
- SPEND_STAGING.SAVING_RTE_PER_USD_AMT,
- SPEND_STAGING.SAVING_PER_USD_AMT,
- SPEND_STAGING.SAVING_PER_BDGT_USD_AMT,
- SPEND_STAGING.AVOIDANCE_USD_AMT,
- SPEND_STAGING.AVOIDANCE_BDGT_USD_AMT,
- SPEND_STAGING.SAVING_USD_AMT,
- SPEND_STAGING.SAVING_BDGT_USD_AMT,
- SPEND_STAGING.NO_FX_SAVING_USD_AMT,
- SPEND_STAGING.NO_FX_AVOIDANCE_USD_AMT,
-150 SPEND_STAGING.TOT_REDUCTN_USD_AMT,
- SPEND_STAGING.TOT_REDUCTN_BDGT_USD_AMT,
- SPEND_STAGING.TOT_NO_FX_REDUCTN_USD_AMT,
- SPEND_STAGING.PAYMENTNET_TRANSTN_NUM,
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM,
- SPEND_STAGING.ROW_CRTE_GMT_DTTM,
- SPEND_STAGING.ROW_MODIFY_GMT_DTTM,
- SPEND_STAGING.ROW_CRTE_MST_DTTM,
- SPEND_STAGING.ROW_MODIFY_MST_DTTM,
- SPEND_STAGING.PRCRMNT_DIRECTOR_NAM,
- SPEND_STAGING.PRCRMNT_PLANT_DSGNTN,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_1_TXT,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_2_TXT,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_3_TXT,
- SPEND_STAGING.SPEND_CAT_ID,
- SPEND_STAGING.SPEND_RULE_ID,
- SPEND_STAGING.TRANSACTION_DATE,
- SPEND_STAGING.SPEND_AMOUNT,
- SPEND_STAGING.ITEM_DESCRIPTION,
- SPEND_STAGING.SUPPLIER_ID,
- CASE
- WHEN SPEND_STAGING.SOURCE ='SPEND'
- THEN 'Spend and Savings'
- WHEN SPEND_STAGING.SOURCE ='TRAVEL'
- THEN 'Travel'
- ELSE NULL
- END SOURCE,
- SPEND_STAGING.SUPPLIER_NUMBER,
- SPEND_STAGING.TRAVEL_PERSNO,
- SPEND_STAGING.TRIP,
- SPEND_STAGING.TRAVEL_DOC,
- SPEND_STAGING.TRAVEL_EXPTY,
- SPEND_STAGING.TRAVEL_EXP_TYPE_DESC,
- SPEND_STAGING.TRAVLE_CREDIT_CARD_TRAN_DESC TRAVEL_CREDIT_CARD_TRAN_DESC,
- SPEND_STAGING.COUNTRY_CODE,
- SPEND_STAGING.TRAVEL_INFO,
- SPEND_STAGING.TRAVEL_ID,
- SPEND_STAGING.TRAVEL_DOCUMENT_NUMBER,
- SPEND_STAGING.TRAVEL_LAST_NAME_FIRST_NAME,
- SPEND_STAGING.TRAVEL_TRIP_REASON,
- SPEND_STAGING.TRAVEL_TRIP_STATUS,
- SPEND_STAGING.TRAVEL_RATE,
- SPEND_STAGING.FINANCE_ORG,
- SPEND_STAGING.ASSOCIATED_MG_CODE,
- SPEND_STAGING.COUNTRY_DESC,
- SPEND_STAGING.TRAVEL_ID_DESC_BANKCARD,
- SPEND_STAGING.COMPANY_CODE_DESC,
- SPEND_STAGING.COST_CENTER_DESC,
- 'Q'||TO_CHAR(SPEND_STAGING.TRANSACTION_DATE,'Q') QUARTERNAME,
- TO_CHAR(SPEND_STAGING.TRANSACTION_DATE,'YYYY') YEARNAME,
-200 CASE
- WHEN SPEND_STAGING.SRC_SYS_CD = 'P-CARD'
- THEN SS2.CLEANSED_PARENT_NAME
- ELSE SS1.CLEANSED_PARENT_NAME
- END CLEANSED_PARENT_NAME,
- CASE
- WHEN SPEND_STAGING.SRC_SYS_CD = 'P-CARD'
- THEN SS2.cleansed_name_1
- ELSE SS1.cleansed_name_1
- END CLEANSED_NAME1,
- CASE
- WHEN SPEND_STAGING.MTRL_ID_1280 IS NULL
- AND SPEND_STAGING.VNDR_MTRL_NUM IS NOT NULL
- THEN SPEND_STAGING.VNDR_MTRL_NUM
- WHEN SPEND_STAGING.MTRL_ID_1280 IS NULL
- AND SPEND_STAGING.VNDR_MTRL_NUM IS NULL
- AND SPEND_STAGING.MFG_PART_NUM IS NOT NULL
- THEN SPEND_STAGING.MFG_PART_NUM
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZAR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280||'-MIX'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZAR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-MIX'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSA'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ASMBLY'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSA'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ASMBLY'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZST'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-TEST'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZST'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-TEST'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZBI'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
-250 THEN SPEND_STAGING.MTRL_ID_1280
- ||'-BURN-IN'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZBI'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-BURN-IN'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZRJ'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-REJECT'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZRJ'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-REJECT'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZPR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-PROBE'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZPR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-PROBE'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEU'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
-300 THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENGWFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEU'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENGWFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-WFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-WFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-POTypeCode'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-POTypeCode'
- ELSE SPEND_STAGING.MTRL_ID_1280
- END ReportingPartNum,
- LU_PCARD_STAGING.COST_CENTR_CD PCARD_COST_CENTR_CD,
- LU_PCARD_STAGING.CTY_NAM PCARD_CTY_NAM,
- LU_PCARD_STAGING.DISABLE_LINE PCARD_DISABLE_LINE,
- LU_PCARD_STAGING.DISABLED_OWNED_BIZ_FLG PCARD_DISABLED_OWNED_BIZ_FLG,
- LU_PCARD_STAGING.DIVERSITY_VNDR_FLG PCARD_DIVERSITY_VNDR_FLG,
- LU_PCARD_STAGING.FIELD PCARD_FIELD,
- LU_PCARD_STAGING.GL_ACCT_NUM PCARD_GL_ACCT_NUM,
- LU_PCARD_STAGING.HUB_ZONE_SMALL_BIZ_CONCERN_FLG PCARD_HUB_ZONE,
- LU_PCARD_STAGING.MINORITY_OWNED_BIZ_FLG PCARD_MINORITY_OWNED_BIZ_FLG,
- NVL(validate_number(Po_Ln_Itm_Net_Prc_Usd_Amt,'')/DECODE(validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,''),0,1,validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,'')),0) po_unit_price_per_1_usd,
- NVL(validate_number(Po_Ln_Itm_Net_Prc_Dc_Amt,'') /DECODE(validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,''),0,1,validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,'')),0) po_unit_price_per_1_doc_cur,
- NVL(validate_number(Spend_Bdgt_Usd_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) spend_up_per_1_usd_budgt_rate,
- NVL(validate_number(Spend_Usd_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) spend_up_per_1_usd_mon_rate,
-350 NVL(validate_number(Spend_Doc_Curncy_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) Spend_UP_per_1_Doc_Curr,
- TO_CHAR(TRANSACTION_DATE,'MM-YYYY') MONTH_YEAR,
- LU_PCARD_STAGING.MTRL_GRP_CD PCARD_MTRL_GRP_CD,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM PCARD_PAY_TRANSTN_LN_ITM_NUM,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_NUM PCARD_PAY_TRANSTN_NUM,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_POST_DT PCARD_PAY_TRANSTN_POST_DT,
- LU_PCARD_STAGING.PCARD_INV_AMT PCARD_INV_AMT,
- LU_PCARD_STAGING.PCARD_INV_CURNCY_CD PCARD_INV_CURNCY_CD,
- LU_PCARD_STAGING.PCARD_INV_DT PCARD_INV_DT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_AMT PCARD_INV_LN_ITM_AMT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_TAX_AMT PCARD_INV_LN_ITM_TAX_AMT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_TAX_CD PCARD_INV_LN_ITM_TAX_CD,
- LU_PCARD_STAGING.PCARD_INV_REF_NUM PCARD_INV_REF_NUM,
- LU_PCARD_STAGING.PCARD_INV_TAX_AMT PCARD_INV_TAX_AMT,
- LU_PCARD_STAGING.PCARD_MERCHANT_NAM PCARD_MERCHANT_NAM,
- LU_PCARD_STAGING.PCARD_OWNR_ID PCARD_OWNR_ID,
- LU_PCARD_STAGING.PCARD_SHORT_TXT PCARD_SHORT_TXT,
- LU_PCARD_STAGING.PCARD_SRC_FILE_NAM PCARD_SRC_FILE_NAM,
- LU_PCARD_STAGING.PLANT_CD PCARD_PLANT_CD,
- LU_PCARD_STAGING.PURCH_GRP_CD PCARD_PURCH_GRP_CD,
- LU_PCARD_STAGING.RCPNT_ID PCARD_RCPNT_ID,
- LU_PCARD_STAGING.REQTN_CRTE_BY_ID PCARD_REQTN_CRTE_BY_ID,
- LU_PCARD_STAGING.REQTN_LN_ITM_NUM PCARD_REQTN_LN_ITM_NUM,
- LU_PCARD_STAGING.REQTN_NUM PCARD_REQTN_NUM,
- LU_PCARD_STAGING.SERV_DISABLE_VETERAN_BIZ_FLG PCARD_SERV_DIS_VET_BIZ_FLG,
- LU_PCARD_STAGING.STATE_CD PCARD_STATE_CD,
- LU_PCARD_STAGING.STATE_CD,
- LU_PCARD_STAGING.VETERAN_OWNED_BIZ_FLG PCARD_VETERAN_OWNED_BIZ_FLG,
- LU_PCARD_STAGING.VNDR_ACCT_NUM PCARD_VNDR_ACCT_NUM,
- LU_PCARD_STAGING.WOMAN_OWNED_BIZ_FLG PCARD_WOMAN_OWNED_BIZ_FLG2,
- DENSE_RANK() OVER (ORDER BY NVL(TO_CHAR(TRANSACTION_DATE, 'YYYYMM'),'190010') DESC) AS DATE_RANK,
- LU_PRICE_BY_UNIT_STAGING.MTRL_GRP PBU_MTRL_GRP,
- LU_PRICE_BY_UNIT_STAGING.MTRL_GRP_DES PBU_MTRL_GRP_DES,
- LU_PRICE_BY_UNIT_STAGING.MTRL_ID PBU_MTRL_ID,
- LU_PRICE_BY_UNIT_STAGING.PLANT PBU_PLANT,
- LU_PRICE_BY_UNIT_STAGING.PLANT_DESC PBU_PLANT_DESC,
- LU_PRICE_BY_UNIT_STAGING.SUPPLIER PBU_SUPPLIER,
- LU_PRICE_BY_UNIT_STAGING.DESCRIPTION PBU_DESCRIPTION,
- LU_PRICE_BY_UNIT_STAGING.UOM PBU_UOM,
- LU_PRICE_BY_UNIT_STAGING.CONTENT_VOLUME PBU_CONTENT_VOLUME,
- LU_PRICE_BY_UNIT_STAGING.UOM_CONTENT_VOLUME PBU_UOM_CONTENT_VOLUME,
- LU_PRICE_BY_UNIT_STAGING.CONTENT_WEIGHT PBU_CONTENT_WEIGHT,
- LU_PRICE_BY_UNIT_STAGING.UOM_CONTENT_WT PBU_UOM_CONTENT_WT,
- LU_PRICE_BY_UNIT_STAGING.PRICE__PACKAGE PBU_PRICE__PACKAGE,
- LU_PRICE_BY_UNIT_STAGING.PRICE_PER_UOM_WT PBU_PRICE_PER_UOM_WT,
- LU_PRICE_BY_UNIT_STAGING.PRICE_PER_UOM_VOL PBU_PRICE_PER_UOM_VOL,
- LU_PRICE_BY_UNIT_STAGING.COMMON_NAME PBU_COMMON_NAME,
- LU_GAC_UOM_REFERENCE_STAGING.LU_GAC_UOM_REFERENCE_ID,
- LU_GAC_UOM_REFERENCE_STAGING.FSL_PART_NUMBER,
- LU_GAC_UOM_REFERENCE_STAGING.SUPPLIER LU_GAC_SUPPLIER,
-400 LU_GAC_UOM_REFERENCE_STAGING.DESCRIPTION LU_GAC_DESCRIPTION,
- LU_GAC_UOM_REFERENCE_STAGING.GAC_MAT_SUBGROUP LU_GAC_MAT_SUBGROUP ,
- LU_GAC_UOM_REFERENCE_STAGING.ACTUAL_FILL LU_GAC_ACTUAL_FILL,
- LU_GAC_UOM_REFERENCE_STAGING.COMMON__UOM LU_GAC_COMMON_UOM,
- LU_GAC_UOM_REFERENCE_STAGING.PACKAGE LU_GAC_PACKAGE
- FROM
- SPEND_STAGING,
- SUPPLIER_STAGING SS1,
- SUPPLIER_STAGING SS2,
- LU_GAC_STAGING,
- lu_card_code_staging,
- LU_PCARD_STAGING,
- LU_PRICE_BY_UNIT_STAGING,
- LU_GAC_UOM_REFERENCE_STAGING
- WHERE SS1.SUPPLIER_ID(+) = SPEND_STAGING.SUPPLIER_ID
- AND SS2.PCARD_INV_REF_NUM(+) = SPEND_STAGING.PCARD_INV_REF_NUM
- AND SS2.PAYMENTNET_TRANSTN_NUM(+) = SPEND_STAGING.PAYMENTNET_TRANSTN_NUM
- AND SS2.PAYMENTNET_TRANSTN_LN_ITM_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM
- AND lu_card_code_staging.card_code(+) = spend_staging.travel_id
- AND lu_gac_staging.po_short_txt(+) = spend_staging.po_short_txt
- AND LU_PCARD_STAGING.PCARD_INV_REF_NUM(+) = SPEND_STAGING.PCARD_INV_REF_NUM
- AND LU_PCARD_STAGING.PAYMENTNET_TRANSTN_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_NUM
- AND LU_PCARD_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM
- AND LU_PRICE_BY_UNIT_STAGING.MTRL_ID(+) = SPEND_STAGING.MTRL_ID_1280
- AND LU_PRICE_BY_UNIT_STAGING.PLANT(+) = SPEND_STAGING.PLANT_CD
- AND lu_gac_uom_REFERENCE_STAGING.fsl_part_number(+) =
-431 SPEND_STAGING.MTRL_ID_1280;Error at Command Line:350 Column:112
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Edited by: Snyds on May 24, 2012 7:46 AMChecking for privileges was the first thing I did.
User has create view and create any view.
Also has alter session privilege which is needed within the validate_number function (see below).
I was able to create the view you suggested.
I believe there is a privilege problem, just cant figure which.
create or replace function validate_number(p_number in varchar2,
p_format_mask in varchar2)
return number
AUTHID CURRENT_USER is
v_number number;
v_mask varchar2(100) := '999999999999999999999.00000000000000000000';
cursor get_number_masks is
select mask,upper(is_i18n) is_i18n from cm_master.format_mask
where type = 'NUMBER' order by sequence, is_i18n;
begin
if p_format_mask is not null then
begin
return to_number(p_number, p_format_mask);
exception
when others then null;
end;
end if;
for a in get_number_masks
loop
if a.is_i18n = 'Y' then
-- We are applying an international number format mask
begin
-- Attempt #1
-- Set the decimal to a ',' and the group separator to a '.'
execute immediate 'alter session set nls_numeric_characters = '',.''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then
-- First Attempt Failed - Attempt #2
-- Set the decimal to a ',' and the group separator to a ' '
begin
execute immediate 'alter session set nls_numeric_characters = '', ''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then
-- Second Attempt Failed - Attempt #3
-- Set the decimal to a '.' and the group separator to a ' '
begin
execute immediate 'alter session set nls_numeric_characters = ''. ''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then null;
end;
end;
end;
else
begin
return to_number(p_number, a.mask);
exception
when others then null;
end;
end if;
end loop;
return null;
exception
when others then return null;
end validate_number;Edited by: Snyds on May 24, 2012 7:48 AM -
Error when trying to create XUSER information for SAPServiceSID
Hi all,
I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install.. Does anyone know a FIX for this?
>xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
FATAL: Close xuser entry failed: could not write USER data [1307]
I am running the command as the SIDADM user.
I have tried the solutions in the following notes without success:
39642
1542818
39439
1875264
1409913
Thanks!Hi Jayson,
Try this.
Solution
Add the "Administrators" group under:
Control Panel
-> All Control Panel Items
-> Administrative Tools
-> Local Security Policy
-> Local Policies
-> User Rights Assignment
-> Take ownership of files or other objects
You check you command and modify.
xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
Regards,
V Srinivasan -
Error when trying to create a site collection
Hi,
I receive the following error when trying to create a site collection in sharepoint 2013. Any ideas of what I can do to resolve?
Sorry, something went wrong
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.ConnectionUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.RequestUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.LoadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.UnloadUsageDefinition'
from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
thanks,
SherazadHi ,
Based on the error message, please check whether you have installed the spPowerPivot.msi add-in on each of your SharePoint server, and ran the configuration wizard, make sure that the powerpivotwebapplicationsolution.wsp
is deployed correctly.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Error when trying to create Pollers in HUM
I am getting an error while trying to create Pollers in HUM. I am selecting All Devices, All Available Templates, and checking the box for Poll all Instances. After choosing all these options, I click next, then it Poll's the devices to fetch instance information. I click finish, then get a screen that says Adding poller details to DB and updating PollingEngine. After this runs, i get a pop up window that says "Error: Unable to update the database. Check the upm_process.log for more details", and the pollers are not created.
I am attaching a screenshot of the error I get, and a copy of the upm_process.logYou may have to reinit the HUM database, we had to do that for IPM recently, however Im not sure of the exact commands and switches to do that
for HUM..... -
Installation Problem error when trying to create WSDL resource in OSB proje
Hi everybody!
I'm getting following error while trying to create a WSDL resource in OSB console:
Caused By: com.bea.wli.sb.common.UserException: Diagnostics for WSDL send-sms/resources/teasdf
WARNING: <0> Installation Problem??? Couldn't load messages: Can't find bundle for base name org.apache.xmlbeans.impl.regex.message, locale en_US
at com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper.createEntry(WsdlEntryHelper.java:644)
at com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper.createEntry(WsdlEntryHelper.java:687)
at com.bea.wli.sb.management.configuration.WsdlConfiguration.createEntry(WsdlConfiguration.java:64)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.alsb.console.support.ConsoleSideMBeanInvocationHandler.__invoke(ConsoleSideMBeanInvocationHandler.java:113)
at com.bea.alsb.console.support.ConsoleSideMBeanInvocationHandler.invoke(ConsoleSideMBeanInvocationHandler.java:71)
at $Proxy187.createEntry(Unknown Source)
at com.bea.alsb.console.resources.wsdl.WsdlRepositoryHelper.createEntry(WsdlRepositoryHelper.java:183)
at com.bea.alsb.console.resources.wsdl.actions.EditWsdlAction.execute(EditWsdlAction.java:88)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
I couldn't find anything related to this error in this forum or the web.
Thank you in advance,
Daniel.Can you post your WSDL here please.
-
Portal runtime error when trying to create new Iviews in EP
Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AMKrishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi
Maybe you are looking for
-
How to convert an .xls file to .csv file using procedure or function
Hi All, My requirement is as follows. 1. In my database server(linux), my excel file will be loaded in a particular directory. 2. I need to load this excel file's data into an external table. 3. Can i load the data from an excel file to table directl
-
Also whenever I use facetime or imessage it says to turn it on. When i go to settings it says "waiting for activation" how can I fix this???? And youtube does not work even though i have internet connection and safari works properly.
-
HT4477 One complete family file missing after installing iPhoto 11 ??
One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in
-
Controlling one pc/CVI application with another pc using GPIB
Dear all, I have the following situation: - Computer A having two NI-DAQ cards (6703 PCI type, each with 16 DA converters) and a CVI application controlling these cards. This computer also has a GPIB board installed. - Computer B having also a GPIB b
-
Switching from iMac G4 to Powermac G4
Hi all, I am switching my main machine from an iMac G4 1.25 to a Powermac G4 MDD Dual 1.25. I wanted to get some advice on the fastest and most effective way to switch. I was thinking either to take out the hard drive in the iMac and install it into