PE4 - Organiser Folder View shows the tree twice

My photos are stored in C:\documents and settings\user\my photos. (Win XP Pro) When I use Folder view in PE4 organiser it shows two trees:
C:\my documents and settings\user\my photos and then under that a new tree
"My documents and settings\user\my photos".
Both trees take me to the same folder my photos. Its very confusing for someone not used to it.
How can I remove one of the two trees from view? I have tried hiding and also removing but both appear to be default

I have the same problem and assumed it has something to do with how I "added" the watch folder.
I am going to play and see if that's the problem.

Similar Messages

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

Why I cant view my picture on my iphoto and if I try to copy to any folder it Shows "The item on the clipboard cant be pasted to this location. (One or more of the item may have been deleted or are no longer available) "

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. Describe the problem as fully as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Drop Down shows the values twice

Hi,
In MPP, there is a drop dop which displays all the Infotypes along with the description.
Populated all the Infotype using the FM F4IF_INT_TABLE_VALUE_REQUEST in Process on Value-request.
But the drop down shows the values twice as,
PA000 : Organisation Assignment PA000 : Organisation Assignment
PA001: Actions PA0001: Actions
In debugging,i have checked the internal table which i pass to the FM, it has only one time.
Could be help me to resolve this.?

Ensure your code follows below logic
PARAMETERS: pa_it TYPE t582s-infty AS LISTBOX VISIBLE LENGTH 40 MODIF ID 2md.
TYPES: BEGIN OF t_infty,
        infty TYPE t582s-infty,
        itext TYPE char40,
       END OF t_infty.
DATA: it_infty TYPE STANDARD TABLE OF t_infty WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_it.
    REFRESH it_infty.
    SELECT * FROM t582s WHERE sprsl = sy-langu.
      MOVE-CORRESPONDING t582s TO it_infty.
      it_infty-itext = t582s-itext.
      CONCATENATE it_infty-infty t582s-itext INTO it_infty-itext SEPARATED BY ' - '.
      APPEND it_infty.
    ENDSELECT.
    PERFORM dropdown_list_values_create TABLES it_infty USING 'INFTY'.
FORM dropdown_list_values_create TABLES f_tab
                                  USING retfield TYPE dfies-fieldname.
"display internal table as a dropdown list,
"return field 'INFTY' when the event is trigerred
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = retfield
      value_org       = 'S'
    TABLES
      value_tab       = f_tab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "dropdown_list_values_create
Regards
Marcin

Switching between the Classic View and the Tree View in transaction FEBA

Hi All
I would like to know how to switch between the Classic View and the Tree View on transaction FEBA for post processing of bank statements. I have a scenario where in the DEV client the transaction is calling up the Tree View and in my QA environment it calls up the Classic View, and I would like to know if there is a way to easily switch between the two views.
I'd appreciate your assistance.

Hi,
I think you can do the same using transaction codes FEBA and FEBAN.
Thanks
Aravind

When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???

When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice. I'm sure it's a simple setting issue. Any thoughts ???

have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.

Why when I publish template to FCPX the design appears as a thumbnail but the view shows the red warning screen with the Number 2?

why when I publish template to FCPX the design appears as a thumbnail but the view shows the red warning screen with the Number 2?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....thank you

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
thank you

Hi Moe,
Sounds mostly likje a bad KB, do you have another to test with?
Or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Catalog manager not showing the tree view

Hey Everyone
I cannot see the tree view when i login in the catalog manger in the online mode.What could be the reason? I can see only the \ folder but not the shared,system and users folders.I checked even the instance config file and made sure the path was right.
Thanks

what does emctl status dbconsole show?
Hi All,
I have installed 10g in Win 2000. Enterprise manager
was working fine after installation. I restarted the
Oracle Service (DB Service, TNS, iSQL, DBControl)
from services in Control Panel. Database is up and
working fine but the Enterprise Manager is not
working. When I am trying to use the EM through
Internet Explorer, it is not asking for any login and
showing as database as down. I am able to connect to
DB from client PC. Please advice.

PSE8 Organiser Folder View?

In PSE8 Organiser I can usually scroll down through all my folders when using Folder View. PSE9 only displays one folder at a time.
Today I opened PSE8 Organiser and it's behaving just like PSE9, only letting me see one folder at a time. Yesterday it was fine.
Has anyone any idea what might have caused this? I really need to scroll continuously through folders, which is why I am still using the PSE8 Organiser.

Folder Location view in PSE 6, 7, and 8 is buggy and often shows the wrong contents of folders:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Folder_Location_view
Deleting and reimporting the "missing" photos won't help. Adobe doesn't care enough about this bug to fix it.

How can I make folder View Options the default in Snow Leopard?

Hi everybody! Here I am, learning to Mac!
When I do a secondary click on an open folder's background and click on +show visualization options+ (actually, +mostrar opciones de visualización+ in spanish), there's an option +set as default+ ( +ajustes por omisión+ ) which, as far as I understood, should change all the rest folder's aspect, as icon's size, font size, background image and so on... but all the rest folder's aspect keep being shown as before, just the folder where I am working changes.
My questions are: if I am wrong with the use of that "ajustes por omisión", what is it for? And how can I personalize the aspect of all folders on my mac?
Thanks for your help

It's "show view options" in English. Also obtained by typing CMD+J
Those only apply to the top-level folder. Each folder you open uses whatever you've elected to use as the defaults. Select a folder, CMD+J, set the view as you desire, click on Use as Default button. That setting will be used for all windows that you open in the future that have never been opened previously. All other windows that you opened will retain whatever view you previously selected for them.
If you want to reset everything to one view, close all open Finder windows, launch the Terminal app (/Applications/Utilities/), copy & paste this command into the window that pops up,
find ./ -name ".DS_Store" -depth -exec rm {} \;
hit the return key, quit the Terminal app, restart, open a Finder window, CMD+J, set up the view options as desired, click the Use as Defaults button, and close the view options window. Now, every Finder window you open will have this view.
Once you sort this out, see:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

In my library i'll show an album but on my classic it will show the album twice, why? and how can I fix it?

Not every body is a computer wizz so why make it so difficult to get an answer. I asked how do I fix it when your library on your PC shows an album that same album shows up twice on my classic. Am I the only one getting frustrated from having to jump through hoops. I thought they were going to make this technology easier for the common person, maybe I was wrong. Help.

See Grouping tracks into albums - still a few hoops but they should get you sorted.
tt2

Why doesn't Activation Request View show the request(s)?

Once in a while the Activation Requests View in Netweaver Studio won't show my Activation Requests. It just shows a highlighted rectangle in the Request ID column and nothing in the Activation Status and Deployment Status columns.
In at least one case, I was able to fix it by closing the view and then opening it again but that's no longer working.
I'm using Netweaver 2004s sp9.
Thanks for any help.
David.

I still don't know what exactly causes this but I've found that sometimes just exiting Studio and coming back in takes care of it.
If I restart the computer, it definitely goes away.
Anyone know if there is a patch for this?

Smart Folder that shows the biggest folders?

Hi all,
I want to know which folders on my harddrive are the biggest in size.
Thus, I made a new smart folder with the criteria
Kind = Folders and
Size Greater than 200 MB
The result is empty.
There are, however, folders that contain 200 MB and more on my harddisk which can be proven easily by activating the "Calculate all size" option in the View options (Command-J).
What am I doing wrong?
Thanks,
Stefan.

The problem is that when you select the Size option, what is REALLY being used is a metadata attribute called "kMDItemFSSize"--which seems to refer to File Size, an attribute of files, but not a metadata attribute that is listed for folders. There is no clue that it doesn't apply to folders, but it doesn't. You could probably make an Automator action to do what you want, but WhatSize probably does it better any way.
Francine
Francine
Schwieder

Show the report on the same dashborad page with the folder tree?

I add a folder in dashboard, and put it on the left.
now i open the folder tree in dashboard, and click a report,
but biee open the report on a new page.
I want to show the report on the same page with the folder,
maybe show the report on the right in the dashboard with the folder.
how could it be done?
thanks ,
newkoa

The only way it could work is using iframes. Now OBIEE 11g would not allow iframes inside it's dashboard. It offers a dashboard object called "Embedded content" which is a restricted iframe kinda thing but unless you get this object's id from generated HTML you can change it's content dynamically. Besides, such an implementation may break with next patch. So here is an idea.
Create a HTML page with two iframes, left one will hold all the reports with links (you can always generate a list of reports through catalog manager, open it in excel and make HTML links from it) that open report urls (in the format of ./saw.dll?GO&Path=....) in right iframe (using javascript open.window method). Once that page is working, call this page from dashboard using an action link. This is slightly twisted approach but at least it would give you what you asked for.
About making the report list dynamic, I am afraid there are no easy answers. OBIEE provides web service that will allow the users to query catalog to get a list of reports. You can try some basic JSP to access the web service and generate the list dynamically. But that is not something I can provide here.

How can you opening the tree.jsp page to a specific folder?

I am trying to pass a query string into the viewer.jsp page so that I can open the appropriate folder relating to that query string. I can't find a way to do this as of yet. A lot of the code doing the work is only .class files so it is challenging.
If you have any ideas as to how to begin to tackle this problem please let me know. Basically the querystring would contain the folder I want the tree to open to.
Thanks,
Simon

See:
*https://mike.kaply.com/2012/02/09/integrating-add-ons-into-firefox/

PE4 - Organiser Folder View shows the tree twice

Similar Messages

Maybe you are looking for