PE4 rendering stops.....due to low memory?

I have windows vista home premium, with intel core 2 cpu 6600 @2.4 gh2, 4G ram, system 32 os, nvidia ge force 7500le and 44.9GB free memory- what gives?  Is my processor big/strong enough?

I would say that your CPU is adequate. IIRC, PrE 4 had a minimum of 2GHz (could be +/- a bit).
Now, "Memory" is twofold:
Physical RAM
Windows Virtual Memory (Page File)
If you are getting Memory errors, I'd first download a RAM test utility, but usually the physical RAM does not go bad - still, it has been known to happen. Next, I'd look closely at my Virtual Memory in Windows. I am a big fan of setting this to static @ ~ 2.5x my physical Ram, and locating it on my fastest HDD. Most systems will run fine, with it located on the C:\, but if one also has their media and Projects on that drive, then an additional HDD might free things up a bit.
Then, I would look at what else is using my RAM and my Virtual Memory. Most computers have tons of totally unnecessary programs and Processes that steal Memory. This ARTICLE will give you tips on cleaning out many of these, and then setting up one's computer for an NLE session.
Good luck,
Hunt

Similar Messages

  • Unable to update software due to low memory

    Software update on my c2_03
    i received d alert on my device this morning;asking me to update new software&i downloaded it but i could not install it due to insufficient memory.1.7mb more memory is needed but i hav only 1.1mb left bcos d rest are system files which i cannot delete.pls help me!
    Moderator's note: The subject was edited as the post was moved to the most appropriate board.

    did you manage to solve your problem, cause I am having the same problem, it has no messages no pics, but i cant add whatsapp...
    Moderator's note: The subject was edited as the post was moved to the most appropriate board.

  • IOS 5 installed now keeps crashing due to low memory???

    Help have just updated my Iphone 3 gs (32gb) to ios 5 and now all it does is crash out of every application and function including messaging and settings. In diagnostics it has recorded every incident as low memory my apps ad music only use up 3.5 gb so loads of memory. Any ideas have restored it and reloaded everything but still the same. HELP PLEASE

    Having the same problems here. noticed it after recent updates of os, itunes and safari. have restarted, rebooted and restored. deleted apps turned off location finding and everything else i have tried

  • Dispatcher stopped due to shared memory realm does not exist in Oracle 10g

    Hi Gurus,
    Suddenly my Message server stopped, i have checked R3trans -d its givign following message
    D:\>R3trans -d
    This is R3trans version 6.14 (release 700 - 12.12.08 - 14:04:00).
    unicode enabled version
    2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'CHE'"
    R3trans finished (0012).
    So i have restarted the server, now message server started then Dispatcher has been stopped again error is same here i am pasting trans.log file
    4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
    4 ETW000 44375 1.224660
    4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=02F07EDC) 23 1.224683
    4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC)
    4 ETW000 32 1.224715
    4 ETW000 dev trc ,00000 Deallocating server context handle 02F07EDC 688 1.225403
    4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1034'
    4 ETW000 49 1.225452
    4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1034 25 1.225477
    4 ETW000 dev trc ,00000 Try to connect with default password 74 1.225551
    4 ETW000 dev trc ,00000 Connecting as SAPSR3/<pwd>@CHE on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
    4 ETW000 62 1.225613
    4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
    4 ETW000 37 1.225650
    4 ETW000 dev trc ,00000 0 UTF8 1 02EEF9E0 02EF5014 02EF489C
    4 ETW000 38 1.225688
    4 ETW000 dev trc ,00000 Allocating server context handle 19 1.225707
    4 ETW000 dev trc ,00000 Attaching to DB Server CHE (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC)
    4 ETW000 43 1.225750
    4 ETW000 dev trc ,00000 Assigning server context 02F07EDC to service context 02EF47E8
    4 ETW000 14810 1.240560
    4 ETW000 dev trc ,00000 Assigning username to user session 02F1BC88 28 1.240588
    4 ETW000 dev trc ,00000 Assigning password to user session 02F1BC88 29 1.240617
    4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC,usrhp=02F1BC88)
    4 ETW000 38 1.240655
    4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
    4 ETW000 49161 1.289816
    4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=02F07EDC) 30 1.289846
    4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC)
    4 ETW000 73 1.289919
    4 ETW000 dev trc ,00000 Deallocating server context handle 02F07EDC 828 1.290747
    4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1034'
    4 ETW000 108 1.290855
    4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1034 22 1.290877
    4 ETW000 dblink ,00431 ***LOG BY2=>sql error 1034 performing CON dblink#5 @ 431
    4 ETW000 21113 1.311990
    4 ETW000 dblink ,00431 ***LOG BY0=>ORA-01034: ORACLE not available 30 1.312020
    4 ETW000 ORA-27101: shared memory realm does not exist dblink#5 @ 431
    2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'CHE'"

    Is this your system ABAP+JAVA?
    As i'm too getting this problem in AS Java, R3trans -d does fail with RC-12.
    But all other my applications are running fine, So need to know the exact reason for same, so any help in this will be appreciated.

  • Cannot download/install game due to low memory, ca...

    Whenever I try to download the game"Imperium - ROTS", I get a message stating that I do not have enough memory to download. The game is 226 Mb, and I have ~1gb available.
    However, I can download/install "Asphalt Overdrive", which is 268mb.
    Why can't I downloaded imperium? I've deleted apps/games and restarted. I'm using a Lumia 520 running the latest version of Windows Phone 8.1.

    Hello, DerpyBacon. Where do you usually save the downloaded apps? Have you tried moving some of them to SD card or phone memory to check if there's any difference? We'll wait for your reply. 

  • Operation temporarily disabled due to low memory

    I am getting this error msg since a few hours now. i have not done anything different since the last time it was working fine. my phone is becoming unresponsive, i am able to recieve email and sms messages, even when the screen is locked, but i am not able to unlock the screen using the unlock button or the power button.
    I have rebooted and still facing the same issue.
    The phone told me that the modest app was unresponsive so it had to quit it.
    i have 1.6GB for installable applications memory
    somebody help please
    Solved!
    Go to Solution.

    Hi there,
    In my case I did the "restore original settings" and initially it seemed to work. The unit returned to the original "Water" theme & seemed OK. However, within a day the message returned & the phone once again became sluggish to the point of being unusable.
    By the way, I have never used nor even configured Mail for Exchange.
    Any further advice gratefully received.
    History:2110i, 5110, 6210, 6310i, 6111, N80, N95, N900, C5-03, Lumia 710, Lumia 920, N9, Lumia 930
    I guess I'll use DOS since nobody supports CP/M anymore...

  • Ipad update stuck due to low memory

    I was updating some apps but since I had only 20mb left the updating apps are stuck.When I click on them it says waiting and then a warning message pops up.And nothing happens I can't open the app.

    I have only 16gb model all I can't delete any data. I think the update needs more then 100 mb. Any other ideas?

  • Low Memory when rendering a video file (Win 8.1; HP Envy 700-230qe)

    Rendering a 4-minute video (with several video tracks) using Sony Vegas Pro13, keeps stopping around 70-80% of completion --- saying that there's low memory.  
    How could that happen on a HP Envy 700-230qe with 32GB DDR3 memory?
    I look at the Task Manager:  the  "Commited" memory keeps increasing during the rendering until it hits the full number (36 GB in my case)  and then the memory is depleted, which stops the render.  
    (No changes to the system except addition of an SSD drive as main drive, and a Blu-ray burner)
    This question was solved.
    View Solution.

    Hello @Mango7 
    I understand that you are having issues with rendering a video using Sony Vegas Pro 13. I suggest you look to the Vegas Pro - Video as it would appear there are settings within the software that should help you. If you cannot find a post that matches what you are trying to do or the issue you are facing I suggest you post there as it would appear that their are numerous community members there that are willing to help.
    Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • IPad mini low memory report - what can I do to stop apps crashing

    The iPad worked well, but friend started playing Nemos reef,, no problem to level 20 now the Disney app is crashing all the time and occasionally Facebook and Safari crash. There is low memory reports but I do not know how to improve that. I did delete some apps but didn't help. Disney no help because I am in UK although they were happy to take money for in-app purchases!

    Do two things:
    1.  In Settings > iTunes & App Stores, turn off automatic downloads for Apps.
    2.  Assuming you sync using iTunes, turn off the automatic app syncing on the App tab when you have the iPads connected that should not receive the downloads.

  • Powerbook Lower Memory Slot Issue, what are my options?

    Hi there,
    I have a Powerbook G4 1.5ghz that I purchased in October of 2004. I had no problems with it until after upgrading the RAM to 2 x 512mb chips and then installing Tiger which resulted in me later notcing the missing RAM and learning about the lower memory slot failure issue.
    I find that sometimes if I remove the RAM and try and power it up and then replace the RAM again that the lower slot ocassionaly does come back. Trouble is though that the machine will either crash or I loose the other RAM slot when I have to shut it down. It seems to be so intermittent this way and I'm tired of constantly removing the RAM to fiddle about with it.
    My serial number begins W8441, so it isn't covered by the returns programe. I would call Apple Support, but I am put off by a £35 charge just to have them discuss and diagnose the problem.
    I'm in the UK and as I don't have Applecare and I'm not elgiable for the returns programe can anyone tell me what they charge for a logic board replacment? Looking at what they charge in the US, it's not cheap.
    I use my Powebook for Final Cut Pro, DVD Studio Pro, After Effects mainly and I had been alright with 1gig when it was working.
    I'm really trying to decide what the best thing to do is....
    - Do I pay for the logic board replacement, which I'm not really sure I can afford right now, or to be without my machine... especially as I have read that it can just fail again.
    - Should I just buy a 1gig stick for the upper slot and try and sell my old RAM, as that would be cheaper than getting the logic board replaced?
    It's a real shame that Apple doesn't seem to want to ackowledge that this effects other users as I'd been so impressed with everything about Apple up until now.
    Thanks for any advice.

    (Browse down for findings and questions).
    The notorious lower-memory-slot-bug has hit my finally too... I never believed it until now (and I've immediately signed the petition).
    I am outside warranty and I never bought Applecare either.
    Also my powerbook, a very dear machine to me, is a less common type to have this problem: a 1 GHz G4 15" FireWire 800 OS 10.3.9 type. Funny enough my older powerbook ( a G3 Bronze) is still running strong with no problems whatsoever.
    My G4 15" also has the "white spots" problem and a dead superdrive... I cannot believe how many hardware problems I'm having with this machine in comparison to all my older macs - even my sluggish powerMac 7200/90 never gave me this many headaches...
    Alright, I'll stop complaining for now.
    I've been able to browse the internet on this and found the following statements:
    The lower memory slot gets "fried" because of a OS 10.3.9 upgrade,
    or possibly due to overheating when the powerbook is put on the users' lap,
    or possibly due to picking the powerbook up by the corners so the metal gets bent.
    + I have only seen one case where someone's UPPER memory slot was defective.
    The solution to this problem (replacing the logic board) didn't seem to be definate in many cases so I'm reluctant to try this myself (and I have very little money). The alternative (replacing the upper slot memory with a bigger type of RAM) seems a bit scary to me,
    because I wonder:
    -will the upper memory slot RAM get "fried" eventually as well after a while?
    -do you need to have something installed in the lower slot or is it possible to just install one RAM card only?
    -are there more people with a 1 GHz PB that have this problem? It seems it's mostly people with a 1,67 GHz that have been bitten by this bug and maybe that's why Apple decided to give the majority a free repair. I am not sure whether that is a common policy, I am part of the minority it seems.
    As a solutions someone posted on a board that we should all buy KTA-PBG4333/1G RAM, but here in Dutch stores it is said this memory is only compatible with 17" powerbooks....
    Does anyone know if it is suitable for 15" as well??
    G4 Powerbook   Mac OS X (10.3.9)   1 GHz G4 Powerbook FW800

  • Finder fails to open when starting up macbook pro due to low disk space (possibly)

    Dear forum,
    I have a Macbook Pro (13") running snow leopard and have a partitioned hard drive (half OS X and half Windows 7). This morning I was using the Mac side and was running low on disk space (very low) so I was moving desktop files into folders to free up some space. I restarted the computer to see what the free space was but the computer stopped/froze at the desktop image (no folders or dock appeared. I restarted the computer many times but the finder never opens and all I see is the desktop wallpaper. I donnected usb drives and put in dvds but the finder never appears so I cn do nothing but shut down and start up.
    I ran Disk Utility but it found no problems with the disk. I do not have a backup of the important file forlders on my drive and due to low disk space I am worried to reinstall and archive the OS since there may not be enough disk space to archive (only about 220 mb free on the apple side when I am in windows using bootcamp).
    Does anyone know what happeded to my machine? Is there such low disk space that finder had an issue? I have started on such low memory before.
    What does Archive actually do when reinstalling OS X? Does it make a copy of the HD files and folders or does it simply reinstall the operating system piece by piece while protecting the files and folders that I wish to save?
    Thanks for all your help and sorry for the length of the writing (I wanted you to understand all before replying).

    Solved
    By chance I got itunes to pop up (running hands over keys blindly) and with it the apple menu icon so I had access to my recently used items and so I could delete images from iphoto and thus bring the free disk space up above zero and then the dock/folders and finder came back....I have just backed up my important files......feeling better now
    Any advice on how to more quickly handle this type of issue next time?
    Thanks.

  • Low Memory Environment Render Issues...

    Howdy folks,
         I've been working on a 13 minute promotional video for a non-profit summer camp. It is made up of mostly still images with some ken burns effects, a narration track, a music track, some titles, and some logo overlays.
         I am doing this on a 3.2 Ghz P4 with only 1.5G ram under XP sp3. I realize this is not an ideal PPro box.
         Windows XP is configured to use 2 drives for VM paging (3Gigs each). All drives have over 100gigs of free space on them.
         Now until recently I've only had a couple of small issues which I suspected were related to trying to do this in a low memory environment. In one case a flash render would die at the same point every time (error was something along the lines of "did not return a valid frame"), and simply scaling down the still image clip at that point in the sequence so that it was closer to the project size took care of it. That method also helped in a few cases where some images would not render at all, and just appeared as black screens in the final video (the render process did not fail, but the end result was missing clips).
         Then there was one case it seemed to fail at random points. A simple reboot took care of that, and it exported just fine.
         But now, however..... Now it's back to failing at random points (sometimes it gets 3500 frames in... sometimes as far as 13400... or anywhere in between) and additionally, by viewing the incomplete flash video file with VLC (which I need to do in order to find out where it failed because PPro never tells me) I find that some of the images are black screens, as before.
         The problem now, is that it's never the same point of failure, and it's never the same images blacked out. And rebooting and or killing off extra processes does not help.
         Now this was rendering fine last week. Here's the kicker - I haven't changed much of anything since then. The project is still the same length, with just about the same number of cuts, tracks, and assets used. The only things I've done since then are:
         1) I duplicated the sequence so that I can make some changes unique to the web-version of the video, and still save the old sequence to go back to. The old sequence has remained untouched and I haven't even looked at it since then.
         2) Created 2 new titles and inserted them in place of some old ones in the new sequence which weren't appropriate for the web version of the video (only the text is different in these new titles... they are the same style, size, etc. as the old ones they replaced)
         3) I shortened some empty time/space/pauses between sections of the sequence.
         So those are all minor changes... but I can't shake the rendering issue no matter how many times I restart or scale down an image that was blacked out or appears at one of the random points of outright failure (again, with the "did not return a valid frame" issue).
         I did notice that after I duplicated the original sequence, the project takes much longer to open. Does having another sequence present in the asset bin use that much more resources? Even if the clips in that 2nd sequence use the same assets as another? I'm tempted to remove the original sequence and see what happens, but I don't want to lose it and have to un-edit the web version whenever I want to go back and re-render the DVD version.
         So basically I'm looking for anything that might cause the small changes I made to be giving me so much grief now.
         Any input is appreciated. Thanks.

    You may have a corrupt project. Try creating a new project and importing the old one into it.
    If you still experience problems then carefully do each of these troubleshooting tips. One or more of them is likely to help.
    Cheers
    Eddie

  • Low Memory.

    After setting for Mail for Exchange, my Nokia E7 phone shows low memory.
    I checked C Memory & there are only important files & that too of small sizes. All major Applications are installed in Mass Memory only.
    Is “Low Memory” issue due to Mail for Exchange? If so, is it possible to transfer / change the data of Mail Exchange to Mass Memory instead of Phone Memory? How?
    Appreciate all the help.

    I had this problem in my Nokia E72, hope its relevant.
    go to office>file manager>phone memory>logs>eng>ods
    are there multiple files. click on options select all and delete. if the no of files is quite large it will take a very long time to delete. or you can select 30-40 files and delete and then check the space. if the free space increases then you need to delete all.
    also try updating your firmware.
    Also checkout this thread http://discussions.nokia.com/t5/Eseries-and-Commun​icators/c-memory-low-on-Nokia-E7-00/m-p/1588222#M1​...

  • Low memory in SCE 8000

    We are constantly getting alarms regarding low memory
    We are monitring the following OID
    memAvailReal 1.3.6.1.4.1.2021.4.6.0 memTotalReal 1.3.6.1.4.1.2021.4.5.0
    We have the total (memTotalReal) from which we substract the available free memory (memAvailReal) and that gives us the total free available memory.
    [root@SCE8000_01 ~]#>free -t
                 total       used       free     shared    buffers     cached
    Mem:       2028668    1682708     345960          0      43016     253000
    -/+ buffers/cache:    1386692     641976
    Swap:            0          0          0
    Total:     2028668    1682708     345960
    [root@SCE8000_01 ~]#>top
    top - 15:34:44 up 4 days,  8:08,  2 users,  load average: 0.63, 0.64, 0.63
    Tasks:  67 total,   1 running,  66 sleeping,   0 stopped,   0 zombie
    Cpu(s): 18.5%us,  1.5%sy,  0.0%ni, 78.5%id,  1.3%wa,  0.2%hi,  0.0%si,  0.0%st
    Mem:   2028668k total,  1683048k used,   345620k free,    43020k buffers
    Swap:        0k total,        0k used,        0k free,   253188k cached
      PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                   
    3373 root      20   0 1382m 1.3g  43m S   58 67.4   3628:53 scos-main                 
    16394 root      20   0  2476 1108  892 R    0  0.1   0:00.15 top                       
        1 root      20   0  1776  628  552 S    0  0.0   0:13.06 init                      
        2 root      15  -5     0    0    0 S    0  0.0   0:00.00 kthreadd                  
        3 root      RT  -5     0    0    0 S    0  0.0   0:01.50 migration/0               
        4 root      15  -5     0    0    0 S    0  0.0   0:00.13 ksoftirqd/0               
        5 root      RT  -5     0    0    0 S    0  0.0   0:03.94 watchdog/0                
        6 root      RT  -5     0    0    0 S    0  0.0   0:01.48 migration/1               
        7 root      15  -5     0    0    0 S    0  0.0   0:00.07 ksoftirqd/1               
        8 root      RT  -5     0    0    0 S    0  0.0   0:00.56 watchdog/1                
        9 root      15  -5     0    0    0 S    0  0.0   6:21.09 events/0                  
       10 root      15  -5     0    0    0 S    0  0.0   0:17.34 events/1                  
       11 root      15  -5     0    0    0 S    0  0.0   0:00.00 khelper                   
       12 root      15  -5     0    0    0 S    0  0.0   0:18.96 kblockd/0                 
       13 root      15  -5     0    0    0 S    0  0.0   0:03.69 kblockd/1                 
       14 root      20   0     0    0    0 S    0  0.0   0:00.00 pdflush                   
       15 root      20   0     0    0    0 S    0  0.0   0:44.23 pdflush                   
       16 root      15  -5     0    0    0 S    0  0.0   0:00.00 kswapd0 
    any ideas why the memory goes low?

    I got this command however i do not know how to read it. Hope somebody can help me
    [root@SCE8000_01 /proc]#>more meminfo
    MemTotal:      2028668 kB
    MemFree:        348060 kB
    Buffers:         43032 kB
    Cached:         250496 kB
    SwapCached:          0 kB
    Active:        1457744 kB
    Inactive:       171376 kB
    HighTotal:     1310720 kB
    HighFree:         1860 kB
    LowTotal:       717948 kB
    LowFree:        346200 kB
    SwapTotal:           0 kB
    SwapFree:            0 kB
    Dirty:               0 kB
    Writeback:           0 kB
    AnonPages:     1335624 kB
    Mapped:          52052 kB
    Slab:            39520 kB
    SReclaimable:    32960 kB
    SUnreclaim:       6560 kB
    PageTables:       2048 kB
    NFS_Unstable:        0 kB
    Bounce:              0 kB
    WritebackTmp:        0 kB
    CommitLimit:   2028668 kB
    Committed_AS:  1374756 kB
    VmallocTotal:   170948 kB
    VmallocUsed:     87368 kB
    VmallocChunk:    74176 kB
    [root@SCE8000_01 /proc]#>

  • "low memory " warning popping up..

    ... "low Memory" "Save your work".Error message pops up. My system.. Dell 530 intel duo e4500 @ 2.20 ghz , 2.19ghz 3GB ram.. Why do i get this warning? Adobe says 2gigs is the minimum ram required.. what do I do to stop this error message from popping up? Thanks so much for helping this Knuckle head out..

    Gonzalo,
    I do not know Adobe's policy on discs, for the download version, but they do offer "replacement" discs, for the boxed version for a nominal fee. This, however, is usually for the latest version of each of their programs. Do not know if they offer this service to older programs.
    I'd follow Steve's advice, but please report back with what you find out. I've always bought a boxed version, whether a new or an upgraded program, so I'm no expert on what Adobe offers.
    Good luck,
    Hunt

Maybe you are looking for