PE4 with MF6 + trial version, help with Blu-Ray project

Is there a work flow I can read up on to accomplish this. I have a Canon HV20 HDV media. Use HD Split import M2T files into PE4 preset 1080i 30, render than save to desktop as same. The file is 1440x1080. I'm trying to make a high definition disk to playback on our Pioneer Blu-Ray player. Using Movie Factory 6+ trial version. Thank you.

Thanks for the reply Paul I appreciate that. Let me go back over what I've done so far as my last post was incorrect. Moved M2T clips from HDsplit into PE4 with a new project setting of NTSC-HDV 1080i 30. Saved to computer with a select MPEG pre-set HD 1080i 30. The short clip plays fine with WMP and properties is at 1920x1080. Using MF6+ I would like to burn my high definition movie clips to a standard DVD to be played back in our Blu-Ray player. Are these the right steps so far to import the clip into MF6+? I just recently downloaded the trial version but last night I found a help/info section in MF6+ so I plan on reading through that to get acquainted with their terminology.
Will I be burning a data disk to make this work? Maybe a couple of cliff notes to get me started so I can better understand how to do this. Your advice and suggestions are welcome.
Jake

Similar Messages

License not present. With the trial version only limited replays are allowed -- Flex builder 4.5 Premium eclipse plugin with SDK 3.5

Hi ,
We are using Flex SDK 3.5 and using eclipse to build the war in order to make it automation compatible , Right now we tried with Premium version of Flex Builder 4.5 eclipse plugging to build and make application automation capable. But we are facing issues in terms of license , After deploying the automation compatible build we are getting error message "License not present. With the trial version only limited replays are allowed".
Previously we are using Flex Builder 4.0 and everything was working fine .
Is Flex Builder 4.5 doesn't support SDK 3.5 ?
Please help .
Thanks in advance
Thanks and Regards
Sunil Kumar

with trial version (FB basic) you can record/replay only 30
script lines. You need to buy FB pro license to remove this
restriction

I am using Lightroom 3 and need to access a catalog I created with a trial version of Lightroom 4.

I need to access a catalog I created with a trial version of Lightroom 4. I am currently using Lightroom 3. Can someone help me find a way to get my images from this catalog? I don't want to upgrade at this point as I am running on a mid 2007 iMac and would need to buy new RAM, upgrade my OS, etc.... I would rather wait and spend the money on a new system when I'm ready.

Hi Rikk,
I just saw your answer to Deborah,
Does this mean catalogs not backward compatable in regards to metadata and keywords as well?
I am working on a giant archiving project here in India. The main system here is a Mac G5 Tower at 10.6.8, and it's running LR 3.2. I have my MacBook Air here, running Mavericks and LR 4.4.1.
I want to take the archive catalog OFF of LR 3.2, put it on the Air, running 4.4.1 - then ADD metadata and keywords to the catalog images while on the Air and THEN re-install/import/export/etc the catalog back to the main tower LR 3.2 with out starting a huge problem of version/upgrades/etc. That way another person can be using the tower to scan while I do keywords.
I have only a week more here for this project. If anyone knows asap would be great. Thanks in advance.
Barbara

Iphoto library was created with a trial version, open version 2 or 4.....

hi, i apparently have an older version of iphoto that thinks its the "guardian" to all of my iphoto pics. i do have iphoto six, but when i try to open it, it says that the iphoto library was created with a trial version of iphoto, and that i should open version 2 or 4 to use that library. i can find no way to open version 6, nor can i find version 2 or 4. is it possible that i accidentally deleted these? and how can i get them back, so i can upgrade to version 6? thanks

I am having almost the same problem! I am not sure what happened to trigger this, but one day, I tried to open iPhoto, and it said that "This library was created with an unreleased version of iPhoto. Please open library with iPhoto 2 or 4." I have been runing iPhoto 5 for the past year!
I jsut bought iPhoto 6 today, hoping that if I installed the latest version, it would fix all of the issues. Well, it didn't! I can't even hold down shift+option when launching the application...once the library is selected, i get the same error message as before.
Can anyone help me PLEASE!!! i'm going to Maui next week, and need to get all of the photos off my camera before i go!

Can you export your files with the Trial Version??

I've been into the help section, and it says to go to Share and then export ect ect, but when I clicked share, I can't click any of the options (theyre that light grey). I REALLY need to be able to export with this trial version I have, and soon. Please help!!

Click in the timeline window to make sure it is the active windqw. The most common cause for grayed out share menu options is if you have the browser as the active window.

Trial version problem with the wrie Create with the trial version

help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail version

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

A window prevent me to create a document with the trial version

I've installed the trial version of Acrobat XI. When I start to create a document a window appears to suggest the purchase and if I click "continue with the trial version" anything happens.

What do you mean by "start to create a document"?
Are you able to start the Acrobat Pro app and open a PDF document?

Do I not get the "open file after publishing" checkbox with the trial version?

I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?

uninstall.
download from prodesigntools.com.
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

DVD Remote "skip" Function Doesn't Work for Blu-ray Projects (CS5 Encore)

     I have graduated from SD to HD and I need help.
I just finished my first HD project in CS5, burned it to a Blu-ray disk and immediately encountered a problem: the skip forward and the skip backward remote functions don’t work. (I have encountered several other problems on the way to get here but I solved those with the help of the manual and by browsing this forum ). In this project, I am doing exactly what I have done in my previous SD projects (where this function works):
In CS5 Encore, I added “Chapter Points at Intervals…”.
On the timeline Properties Panel, I kept the default selection “Operations: All Permitted” (that includes “Search for Chapter” in the “Permitted User Operations” menu).
In the “Project Preview” window, clicking on the “Next Chapter” or “Previous Chapter”, the function is executed correctly.
Still, after burning the blu-ray disk and pressing the “skip forward” or “skip backward” buttons on the Blu-ray player (Panasonic DMP-BD65) remote, the “Operation is not permitted” message appears. (This very remote button function works on all my SD projects.)
More background info: I am also using Encore Chapter Markers from the PrPro project linked with Adobe Dynamic Link, chapter marker End Actions (Jeff’s The Focal Easy Guide to Adobe Encore DVD 2.0, pp. 178-180), and Bill’s advice on using the “dip to black” transition to avoid the ~1 second gap between chapters in the Chapter Playlist that I use to play all chapters. The following observation may be unrelated: in Encore’s Monitor Panel, the “Step Forward” button with pressing the Alt key does not move the CTI to the next GOP mark. The “Step Forward” or “Step Backward” functions (without pressing the Alt key) work (moving the CTI one frame)..
At this point, I desperately need the Forum’s help.
Thanks,
     - Laci.

Up to now I worked only with standard definition projects and outputted them
to DVDs. This is my HD project. My problem is that I am a bit confused with
the proper (and simple) settings for a blu-ray project. Your
questions/comments imply that I am making a "DVD project" - but then, how
can I burn it to a BD?
Here is what I am doing, and please, let me know if/where I am making my
mistake:
1.       On the camcorder the recording format is set to "AVCHD 1080/60i
HA".
2.       In the CS5 PrPro new project:
a.       General > Capture Format: HDV
b.      New Sequence > Sequence Preset > AVCHD > "AVCHD 1080i30 (60i)".
3.       In Encore: File > Project Settings > Basic:
a.       Authoring Mode: "Blu-ray"
b.      Transcode Settings: "Codec: MPEG-2; Dimensions: 1920 x 1080; Frame
Rate: 29.97, Fields: Upper Field First, Audio Transcoding Scheme: Dolby
Digital, Maximum Audio/Video Bitrate: 15.0 Mbps"
c.       In the "Default Transcode Settings" window, the Blu-ray tab is
highlighted. (There, I could change the codec from MPEG-2 to H.264 -
according to some articles it would give slightly better quality in certain
circumstances - I don't know.)
d.      On the Encore Project Panel, right clicking on the sequences, and
choosing "Transcode Settings" from the menu, I get a window that says "DVD
Transcoding" and "Blu-ray Transcoding". In the Blu-ray Transcoding section,
I choose Codec: MPEG-2, Dimension 1920x1080, Frame Rate: 29.97, Quality
Preset: Automatic Using Project Settings.
e.       Going into the "Edit Quality Presets", I change the "Export
Settings Preset" to "1920x1080i 29.97 Maximum Quality" (from the 1280x720)
4.       Now, in the Project Panel, under the Blu-ray Transcode Settings I
see: "1920x1080i 29.97 Maximum Quality MPEG-2".
Are these the correct settings for a high quality Blu-ray project? I am
re-transcoding the project with these settings to see if I still get the bad
transitions.
Thanks for your advice,
Laci.

Blu-Ray Project question

Hi,
I recorded with a professional Sony HXR-NX5E camera a video. The recording time should be around 130 minutes.
I have files from 00000.MTS to 00010.MTS with a total disk space of 19,60GB
Now, I wish to create a DVD and a Blu-ray media and would assume all I have to start with is creating a correct project like this one:
PAL AVCHD 1080i 25 (50i). Is this correct so far?
Now my problem is trying to understand, up front, if i will be able to fit this project into a Blu-ray disc like this one (Verbatim BD-R SL Datalife 25GB 6x Wide Inkjet Printable).
I tried to run an export and selected H.264 Blu-ray but the output file is 226922 MB which is way too large and was puzzled if this will work or not.
Please note that I have not created any Blu-ray project before. (any reference guide you can provide me with will be of great help).
Can someone please guide me through trying to understand if I can fit this video into 1 Blu-ray disc? Perhaps at the time of creating the Blu-ray disk it will shrink it down?
Thank you
NOTES
Here is the info taken from one of the .mts files:
Format                                   : BDAV
Format/Info                              : Blu-ray Video
File size                                : 1,98 GiB
Duration                                 : 12min
Overall bit rate mode                    : Variabile
Overall bit rate                         : 22,3 Mbps
Maximum Overall bit rate                 : 24,0 Mbps
Video
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Si
Format settings, ReFrames                : 2 frame
Format settings, GOP                     : M=2, N=13
Codec ID                                 : 27
Duration                                 : 12min
Bit rate mode                            : Variabile
Bit rate                                 : 21,2 Mbps
Maximum bit rate                         : 22,0 Mbps
Width                                    : 1.920 pixel
Height                                   : 1.080 pixel
Display aspect ratio                     : 16:9
Frame rate                               : 25,000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bit
Scan type                                : Interlacciato
Scan order                               : Top field first
Bits/(Pixel*Frame)                       : 0.408
Stream size                              : 1,88 GiB (95%)
Audio
ID                                       : 4352 (0x1100)
Menu ID                                  : 1 (0x1)
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 129
Duration                                 : 12min
Bit rate mode                            : Costante
Bit rate                                 : 256 Kbps
Channel(s)                               : 2 canali
Channel positions                        : Front: L R
Sampling rate                            : 48,0 KHz
Bit depth                                : 16 bit
Compression mode                         : Con perdita
Delay relative to video                  : -80ms
Stream size                              : 23,3MiB (1%)

Hello friend, generally you can put only 120 min on a bd of 25gb, the real capacity of an bd 25 gb is 23gb, you can put all the video in but u have to tweak your video bit rate when you export your video , i have to export a 129 min timeline with a variable bitrate of 20 and max bitrate of 22 and someday i get lucky somedays not, you will have to learn how to use a bit rate calculator , (google it) cause i dont know it, so i fine tune video bitrate until it shows me my final render around 19-20 gb or maybe less to be sure choose on sound a lower bitrate 320 or maybe lower and dolby digital and try to mux them (multiplexer option select TS). This is my workflow in general...
U can see that in your video info that your video haves now :
Bit rate                                 : 21,2 Mbps
Maximum bit rate                         : 22,0 Mbps
and only 19 gb
Adobe preset is hd 25 i and tries to make a video with target bitrate of 25 and max 30, so it will render more ....

CS6 Error Message When Burning a Blu Ray Project to DVD

Hi,
I'm trying to burn a Blu Ray project to DVD and I'm getting this message when I try to build the project:
The project is an excerpt from a larger one and contains only 2 video files and no menus. However it's particularly worrying because the project from which this is an excerpt is large and complex. I have created it as a Blu Ray project but my final deliverable is DVD. I really don't want to have to rebuild as a DVD project because it took half a day to link up all of the menus and chapters.
Is there something I need to do in my encode settings?
Thanks in advance.

Thanks for your reply John.
It's extremely frustrating that this is the case. I'd have started with a DVD project in the first place had I not read this: http://helpx.adobe.com/encore/using/building-finished-project.html , specifically the following excerpt:
"You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format."
Reading that gave me the confidence to go ahead and build as a Blu Ray. I now have to find another half day to rebuild the project as a DVD.
Thanks again for the information.

Trying to Create DVD from Blu-Ray Project

I'm a fairly new user to Encore CS4.   I was able to successfully create a Blu-Ray project using HD video - the actual video is a little over 3 hours.   It took about 30 hours for the project to transcode and burn.   I'm now trying to take that same project and created a single layer DVD.   I'm really struggling with this even though the software says I should be able to do this.    So I set all my settings up to create the DVD and started the process.   It was trancoding the video for 6 straight days!!!!!    When it finally got finished with the transcoding process I got an error that said this aspect ration was not supported by DVD!!!   So I'm confused at what I'm doing wrong.   First, I don't think the transcoding process should be taking that long.   Second, if the aspect ration is not correct, could it tell me that before it spends 6 days transcoding the video?    Third, I'm trying to burn the DVD using the same 16:6 widescreen aspect ratio, so I'm not sure why it's telling me the aspect ratio is not correct.    But what frustrates me the most is that it took wasted days before the software told me it didn't like the aspect ratio.
I know there's products on the market that will basically copy a Blu Ray to a DVD and are supposed to do that in something like 4 -5 hours. Why on earth would Encore be taking 6 days to transcode my video.
Anyway, if anyone has any ideas please let me know.
Thanks!

Thanks, I'll try these suggestions next. I had found a post from "janaiott" suggesting to select "interpret footage" then choose "conform to SD NTSC Widescreen".   They said that worked for them.   This post was titled "Use the same project to export to both BR and DVD?"
I tried that and restarted the build. The video transcoding went much quicker - instead of running for 6 days it finished in 2 days.   However, at the end of the transcode process I once again recieved the aspect ratio error.   My exact error is:
PGD "Sequence 01/Band.prproj" has an error at 88.8888s. The aspect ratio of this file is not supported by DVD. - PGC info: Sequence 01/Band.prproj =Bpgc, time=88.8888s.
I'm still just baffled why Encore can't be smart enough to tell me it doesn't like what I'm doing before it spends all that time - what a waste of time! I really don't mind waiting 2 days as long it works
If anyone else has any suggestions, please post - but I will move on to the next suggestion and see what happens. Just too bad it will take at least 2 days to know whether it works or not

CS4: maximum buttons for a blu-ray project

Hi,
I've a project with 6 languages (about 180 Buttons each language).
I burned it as a normal SD-DVD. No problems there.
But when I tried to burn it as a BD I get a error message.
The Original message is german and could look more or less like this in english:
Blu-ray-Object: "<Button>Menu/1", Error: "Counter overflow", Code: "2", Message: "maximum 999 titles per project (Spec Annex B)"
Does that mean that you can use a maximum of just 999 Buttons for a blu-ray project? Or what else could that mean?
If I can just use 999 Buttons how should I realize a project with more Buttons? I mean, 1k Buttons are not unusual for a Service-DVD.
Greetings from Germany
Christoph

This Encore FAQ Entry lists the supported BD formats in Encore.
Good luck,
Hunt

Blu-ray project creates SD menu

Hi guys, I've read this problem before on here a couple of years ago but cannot find it again now!
I'm creating a Blu-ray project, I have imported a 1920x1080 jpeg as the menu background but when I right click on it and choose new>menu it creates an SD one
how do I change it to 1920x1080?
cheers

maffmace wrote:
Hi guys, I've read this problem before on here a couple of years ago but cannot find it again now!
I'm creating a Blu-ray project, I have imported a 1920x1080 jpeg as the menu background but when I right click on it and choose new>menu it creates an SD one
how do I change it to 1920x1080?
cheers
Hello
In the lower right corner of Enc you should have the Library which has all the menus, buttons,etc.
In the general tab you will have blank HD menus, both wide and standard and others.Pull the one you want into the project window
and then pull your jpeg onto the blank menu.You can then scale it, or open it in PS.
Hoped that helped.
Kent

Has anyone been able to export to flash using a Blu-ray Project in CS3?

Has anyone been able to export to flash using a Blu-ray Project in CS3?
If so what files, settings and OS were you using?
Whenever I try to export to flash from a Blu-ray project the program always crashes.

S&G wrote:
Eric Root's posting answered my question. He said to downlaod DiskmakerX. It worked like a charm to create a bootable Mavericks Installer Flash Drive.
tips on use: https://discussions.apple.com/message/18705466

PE4 with MF6 + trial version, help with Blu-Ray project

Similar Messages

Maybe you are looking for