PE51 form to HRFORM Smartform
Hi Everyone,
Can PE51 form design convert into SAP SmartForm which later can be used for HRFORMS ?
If YES, could someone explain how it can be done without missing any setup being done during PE51 design?
Regards,
KKP
Can share the solution?
This is posible?????
Kind regards
Similar Messages
-
Migrate PE51 form to smartform
Hi,
I have seen some posts in this forum about converting a PE51 form to smartform but not answered really. So is there any way to migrate a PE51 form to a smartform ?
Thanks
SubhaCan share the solution?
This is posible?????
Kind regards -
HI Experts,
I have a custom PE51 form and I need to convert it to smartform and the add a logo to that smartform.
Can anyone share as how can I convert the PE51 form to Smartform.
Thanks a lot in advance!!
Regards,
ShilpHi,
I would also recommend the use of HRFORMS. It is another way to build the payslip and you may add images (company logo) without any difficulties.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0528dc0-fdd9-2d10-b985-c2dfa4680e1b]
Hope it helps.
Kind Regards,
Edoardo -
Have several question:
1. Can PE51 form design convert into SAP SmartForm which later can be used for HRFORMS ?
if YES, could someone explain how it can be done without missing any setup being done during PE51 design ?
2. what is significant different between HRFORMS and SMARTFORM function? please adv.
will reward for any help or comment.
regards,
RudyI finally able to add this logo into PE51
-
Issue in PE51 form with negative amount
Hi experts,
Im developing employee payslip in HRFORMS transaction by referring the existing PE51 form. Now i face one problem with the payments and deduction amount displayed in the existing PE51 form.
That is, a particular wagetype displayed under deduction column is displayed as +ve amount. But when i checked the corresponding wagetype amount in PC_PAYRESULT, the amount is in negative.
So i want to know whether any logic is written in PE51 form to chnage the negative symbol.
When i checked the rule, i see the below rule.
01 1 XRT BETRG N NE ' 0
Can anyone tell me where the logic for PE51 form is written?Andrejus, I just tried this in OTN4 build and it works ok for me.
Can you try the following testcase I built?
http://www.oracle.com/technology/products/jdev/tips/muench/temp/lovdoesnotfiremandatoryattributestest.zip
Run the TestPage.jspx in adfc-config.xml
Click the button to start the "create-employee" task flow.
In the new row, I click the Deptno lov button and pick a department (say, 30) from the LOV.
No mandatory attribute errors are thrown.
NOTE: Notice that in TP4 there is no longer an "ADF Create Form" and that we're encouraging you to create a create form using a method activity that declaratively invokes the create operation, then forwards to a page with a regular ADF Form on it. This is due to the numerous confusions that have always surrounded the ADF "invokeAction" now that we have a visual, declarative mechanism to model this type of initialization activity, we will prefer users adopting that.
Also, notice that the page definition for the method activity has the new "SkipValidation" property set to true.
Can you evolve my testcase into one that still reproduces the problem so I can file a new bug for the remaining problem? -
PE51 - How to display a custom result in a PE51 forms?
Hi experts,
I want to display the result of a specific Module Function in a PE51 form (payslip).
The module function returns a table with a proper contain for each employee / period.
I don't know the size of the table (number of lines) for each employee, and data may change.
For example 2 pieces of payslip from 2 employees :
Name : Mr Smith
Entry 1 | Good Father
Name : Mr John
Entry 1 | Tall
Entry 2 | Funny Guy
Please, could you help me to find a standard friendly solution?
I imagine I have to use a window with a specific line and so on but I don't know "where" to insert the module function call and which table I have to fill.Do you think it's impossible to display a specific table in a PE51 form respecting the standard?
-
Adobe Form in HRFORMS: Value of Textfield on Masterpage is not rendered!
Hi all,
I design a new form using HRFORMS. When I put a simple textfield on a master page and give the textfield a default value and render my form using transaction PC00_M01_CALC_SIMU, the value of the textfield is NOT rendered.
I am using Adobe LiveCycle Designer 8.0 within SAP and the Adobe Acrobat 7.0.9 for rendering PDF documents.
The ADS Server Version is: 800.20070708051308.406522
The funny thing is, if you do the same things in Adobe Designer (stand-alone) it works perfectly as it should.
Is this a known bug?
Thanks.
MaikI have figured out myself.
It is a bug in SAP and has also been reported as a bug to SAP.
It works fine with all Adobe Designer stand-alone versions as well as Adobe LiveCycle Forms Server 7 and 8.
As a workaround in SAP you should use STATIC TEXT with "FLOATING FIELDS" instead of TEXT FIELDS. -
PE51/Form Editor for Payslip - Need to Include a digital signature
Hi,
I have the digital signature of the Manager of HR, and I need to include it in the payslip automatically.
The payslip was made by using de PE51 Form Editor, and I can´t find the way to include it.
I need to Know if there is a posibility to do this, using the PE51, or if I need to re-do the form in Sapscript.
Thanks for your answers.
Susana Quiroz.I believe you do have to put it in a SAPScript form. I do not recall any way to put it directly into your HR Form through PE51. Our rem statement is printed using a combination of a SAPScript and an HR Form, so our electronic signature is just included in the SAPScript.
You might want to check your config to see if you already have a SAPScript assigned to your payment method. It is under: Financial Accounting --> Accounts Receivable and Accounts Payable --> Business Transactions --> Outgoing Payments --> Automatic Outgoing Payments --> Payment Method/Bank Selection for Payment Program --> Set up payment methods per company code for payment transactions. -
hi experts,
I want to print a new field in PE51 Form.
i added a new line in the form.
but when i selected the single field radiobutton and in change mode double click at the position where i wanted to print a new value it is giving error ie dialog box -
No data has been set up at this fixed position.
so are ther any attributes to set for the new line added for data to be printed?
Please reply me how to do this as soon as possible.
Thanks & regds,
imranDear Imran,
Double click will work only after assigning the source value for the field instead first you should create the value to fetch the data for the field.
Good Luck.
Om. -
Hi All,
Does anyone know how to at a counter to a PE51 form without modifying the program using the form.
I'm asking because i have a form showing information for multiple employees. I would like to have a counter in order to know how many employees are displayed.
Thanks in advance,
ArthurYou need to first create a window, and then create a change group within this.
Do this in the Create Window view, by selecting an area where you wish to add the field, click new, and then mark the opposite corner of the area and click 'Select end of block' button (F9).
Once you have done this, enter a window name, tick.
Now double click on this line and a change group window will be shown, add a line to create a group and click transfer or refresh.
Now you may double click on this group to enter fields. -
Linking PE51 Form and SAPScript Form
I have found quite a few posts on this topic but I didn't find anything conclusive.
We have an SAPScript form and a PE51 form. We run the Pre-program DME where we specify the PE51 form name. Then we run the DME program. But the form is not generated.
I just wanted to understand the right method to link the PE51 form to the SAPScript form. I have read about 525-HR and REGUD-TXTHR. Can anyone please explain in detail what these are and how they help in linking the PE51 form and the SAPScript?
Thanks and Regards,
Vidya.I have really not found an answer to this one, but still closing it as need to post more questions!
-
how to use form routines in smartforms??..there is a option for using it in the global definition..plz explain the proper sequence of using it
Hi Arun,
In Form routines tab you enter routines that you want to use in the form via the program lines node. Within these form routines you cannot access any global data unless you explicitly pass them to the form routine interface.
i hope this will be helpfull to u,
Regards,
swapnil -
Urgent : Regarding Adobe Forms ,Scripts and Smartforms
<i>
Hi Floks
Any body having Adobe Printing Forms ,Scripts and Smartforms documents Links can you send me to me . Its will be help full to me
thanks
suresh</i>Hi Suresh,
SCRIPTS
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://www.thespot4sap.com/articles/SAPscript_Introduction.asp
http://www.onestopsap.com/sap-miscellanous/sap-script/
http://sap.niraj.tripod.com/id19.html
http://help.sap.com/saphelp_45b/helpdata/en/65/897415dc4ad111950d0060b03c6b76/content.htm
http://www.thespot4sap.com/Articles/SAPscript_commands.asp
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm -
Import PE51 Form to SAP Script
Hello Experts,
I am Importing PE51 form to SAP Script.The Problem is after Executing the Program RFFOUS_C the PE51 form is coming...into SAP Script But it(PE51 Form) is Compressing?.I don't know why?.But when i executing the Program RPCDTCU0_CE.The PE51 Form is Showing Exactly..without any Compression.
In Searching the Forum i have found these threads..But in these threads i haven't found any Solution
Integration of SAP Script form and HR Form
PE51 - Form Editor
Thanks in advance.Hey ankur,
Normally you get dashes instead of line because of two reasons:
1. Because the Font Size you are using for the Line is Small hence it cannot print a continous Line..
Please increase the Font Size and try checking in the Layout.
2. Sometimes the SAP printer you have configured does not support the Font Type You have used in Scripts...
Kindly check T-CODE SPAD to see the Device type of the printer you are using supports that font.
Hope this helps you...Have a nice day at work..
Thanx,
Navin.... -
Tables in form interface in Smartforms
Hi
Generally for creating Tables in Form Interface in smartform , We have to create a Zstructure Or ZTable Type in SE11 and then we refer this structure in form interface. My requirement is how can we create Tables In Form Interface in smartforms
without creating Zstructure In se11. Can you please tell me is it possible , If possible then how can i do it.
Thanks & Regards
GirdhariHi friend,
If you have a driver program and you need to pass data from the driver program to the smartform then during Form interface declaration you need to specify a global parameter. Which you will be creating using SE11.
With out creating a global structure or global table type we cannot declare it. If you have all the logic with in the smartform then you can declare the table type or structure with in the form then declare it.
But once if data comes from outside then we should go for global.
So i hope you will be clear and got the answer for your question.
Thanks,
Sri Hari
Edited by: srihari.kumar on Feb 8, 2012 12:06 PM
Maybe you are looking for
-
Getting OOM error while retreive 2lakhs record from DB
I have a java program with a simple Select query that fetches around 2lakhs record from DB and will display in a JSP Page. When I try to fetch huge amount of data the server causing OOM. I got few suggestions to add setFetchSize(1000) to my Statement
-
The content item must have a primary file.
I am trying to check in a new file use the service "CHECKIN_NEW" in UCM 11.1.1.6. I checkin the *"CHECIN_NEW_TEST.hcst"* into the content server. And run it by submit the page to test the service. The error cause like this: Content item '001026' was
-
Candidates for use of Singleton Pattern
Hi Can any guide me , where to use Single Design pattern in Java Based Applications Should i use Singleton Pattern in the following situations 1)RMI Server 2)Controller Classes ( MVC) invoked by Servlet 3)Database cashing /handling classes Please sug
-
Having tried to ask this question it didn't recognise my account, so have now created another one, with the same email address, just to ask this question, it doesn't make sense.
-
Phone has full signal but will not send texts
I am on a contract with an S5 mini and can have it showing full signal and 4G but I have to go walk about to try to get a text to send, my friends will send me texts that arrive hours later, in a completely random order to which they were sent some h