PE6 and ACR Plug-In 5.1

I am using PE6 with System 10.5.5
Where do I install the 5.1 Plug-In?
Many thanks.

It actually may be different for PE6 you should ask in the Elements forum as nobody in these parts uses Elements.

Similar Messages

PSE 10 and ACR plug-in

Downloade and installed ACR v.6.6 for my Canon 70D and PSE 10. PSE 10 will not allow download of raw files. Pleae help!

The 70D requires ACR 8.2 and so requires PSE12.
Your options are:
Use the software provided with the camera to convert the RAW files to TIF for processing in PSE10
Use the free DNG converter from Adobe to convert the 70D CR2 files to Adobes RAW DNG format. They can then be opened in PSE10 Camera RAW - http://www.adobe.com/uk/products/photoshop/extend.displayTab2.html#downloads
Buy PSE12.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

LR 4.2RC and ACR 7.2 RC won't read SONY RX 100 ARW files

I was at a wedding yesterday and had two cameras with me - a Nikon D800 and my little SONY RX 100. I was using an Eye-Fi Pro card for the Sony. I'm uninterested in the Wi-Fi capabilities when I'm away from home, but like the camera to upload pictures when I'm close to my big processing machine. Long story short. This was the first time I've used the LR 4.2RC and ACR 7.2RC with the Sony RX 100. I plugged the card into both the regular Eye-Fi USB reader, and into my Hoodman USB 3.0 reader. Of course, LR doesn't like the Eye-Fi reader, but it loves the Hoodman. Finally, it recognized the Hoodman and the Eye-Fi card. I have previews set to minimal and I was attempting to import all the raw (ARW) files into Lightroom. When the initial previews come up as I start the import process, it shows about 1/3 of the previews and then tells me it can't read the rest, including MP4 files. When I actually begin the import, it simply times out and reports that it was unable to import ANY of the ARW files, nor the MP4 files. I have no trouble reading 63 files into Raw Photo Processor so I know there is nothing wrong with any of the files. I can only conclude that there is something wrong with LR 4.2 and/or ACR 7.2.
Anyone else reporting this problem? I'm puzzled because this is the ONLY time I have ever had trouble importing files from supported cameras.
Thanks for feedback.

Well. After some experimentation, I discovered what the problem seems to be. For reasons completely opaque to me, Lightroom expects not only that the Eye-Fi card will be read from its own reader, but it also expects that the Eye-Fi helper application be installed and running. Of course, this means that I end up with duplicate copies of every file - once to the Eye Fi directory, and again to the appropriate Lightroom Folder on a completely different set of drives. I guess the conclusion I can draw from this is that without the helper application, the Eye Fi card is dumb and the images only partly visibible. The Eye-Fi helper can import the .ARW files, but it doesn't display them because Apple hasn't updated its camera list to include the RX100. Until they do, I think I'll just use regular cards and consign the Eye-Fi card to the hall of unhelpful cards. Yikes, the darned thing is as expensive as the Lightroom upgrade.
Sigh.

Opening Nikon D600 NEF files using PhotoShop CS4 11.0.2 and ACR 5.7.0.213

Hello,
I've just bought a Nikon D600.
I have Photoshop CS4 11.0.2 and ACR 5.7.0.213.
With these versions, I'm unable to open the D600 NEF files. I get the following message:
"Could not complete your request because it is not the right kind of document"
Yet I can view the NEFs in other software that pre-dates the D600, e.g. FastStone Image Viewer 4.6.
Does anybody know if I can get a plug-in from Adobe for PS CS4 that allows me to edit D600 NEFs?
Many thanks for any help.
Regards,
Aisling

Either upgrade to Photoshop CS6 or download the free DNG Converter and covert your NEFs to DNG.

LR 4.3 and ACR 7.3 compatability

I received the familiar alert "This version of Lightroom may require the Photoshop Camera Rawy plug-in version 7.3 for full compatability" and accidentally clicked "don't show again" and "open anyway". How can I get back to having the choice to "Render using Lightroom" when I export using command-E?

rickpatrick wrote:
If I understand correctly, when I click "render using lightroom" in LR 4.3 the result is the same as would be the case if I had CS6 and ACR 7.3. Am I right?
Yes but...
There are two behaviors and it depends on whether or not ACR and LR are in-sync...
If out of sync, Lightroom will render the file using the LR 4.x engine but it needs to save the file with a -Edit BEFORE sending it to Photoshop.
If ACR & LR are in-sync, LR sends the image to ACR and ACR renders it and the file will only be saved when you save it from Photoshop (to where you save it).
In the out of sync situation, the -Edit file is manditory, in the synced case, the file is only saved when you save it from Photoshop.
However, in both cases, the rendered image will be the same. The only difference is the file handling.

Have photoshop cs5 installed on desktop..got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still now working. Need help, please.

I have photoshop cs5 installed on desktop...got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still not working...help please.

In any event, that camera was first supported by ACR version 7.4 which needs at least CS6 to run. Naturally, all later versions support it too.
Your choice is either to upgrade your Photoshop, or to look for, download, install, launch and run the free, stand-alone Adobe DNG Converter 8.6 on each folder containing your raw Canon files to convert them first to raw DNGs that you can open in CS5.
In no case does an Adobe application belong "on your desktop". The default install location should always be respected and left alone.

Canon 5D MKII and ACR

ACR doesn't show 5D MKII thumbnail images and won't go to just ACR without opening PS. My 1DS MKIII shows the image and does not have to open PS. Can you tell me if this will change for the 5D? OS Windows tried on 2 computers.
Thanks

What version of Photoshop? What version of the ACR plug-in?
Have you Purged the Cache through the Tools menu in Bridge for each offending folder?

PSE 9 and ACR

Hi, I am about to download the ACR version for PSE 9; however, there is no file camera raw.8bi in the appropriate file (... Plug-Ins/File Formats). Is there because the brand new out of the box PSE 9 doesn't come with that file??? Do I just go ahead and download the ACR ver. 6.2.0.29?
Also, when it is downloaded will I know which file is the 64 bit and which is the 32 bit?
Lastly, does anyone know how to disable the Adobe Photo Downloader from Organizer in PSE 9. My previous version 5 had an option to disable launching but I don't see that in PSE 9.
Thank you for any help.

The ACR plug-in is stored in a "shared" location so that both Organizer and Editor can access it.
On Windows 32-bit, it's here:
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 9\File Formats
On Windows 64-bit, it's here:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 9\File Formats
On Mac OS, it's here:
/Library/Application Support/Plug-Ins/Elements 9/File Formats
ACR 6.2 for PSE on Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4809
ACR 6.2 for PSE on Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4810
HTH

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Need help with Olympus E-M1 and ACR 8.3 Results

Hi:
1. I'm fairly familiar with photoshop and ACR, but definitely not an expert.   I'm also very familiar with the Olympus RAW files since the E-5 (I've owned the E-5, E-M5 and several Pens); I now recently purchased the E-M1 and I've been having problems getting decent images out of the RAW files (compared to the prior Olympus RAW files).
2. Problem: it just "feels" that the overall tone curve is more abrupt, especially in the highlights.    With the prior Olympus RAW files, the transition from moving the exposure slider to the right and then getting blown out highlights was more gradual;   there just seems to be an overt decrease in "headroom" when dealing with highlights in the E-M1 RAW files.   I know this makes no sense in that the dynamic range is supposed to be greater with this camera compared to the prior ones.
3. Problem: In relation to the above issue, it also seems that the highlight slider is not as specific as it used to be in that when I move it to the left, more of the histogram seems to be affected as opposed to the bright / highlight region.   It now seems to basically counteract any adjustments made to the exposure.   Again, this may be my imagination but it just feels this way.
4. Problem: In relation to the above issue, the other strange observation I've had is that although the histogram of the image shows no clipping, the image may have very bright areas with almost imperceptible detail;   when I click on it and view that data point within curves, it shows it to be well below 255.    In my lame flower shot example (it's not a good example but I couldn't find anything else right now), I would have guessed that in the brighest petal area, that it would be something like 250, but it's only 220.   But when I zoom in, there's really no texure or detail or data.
5. The above issue in re: highlight rendering and control may or may not be related but it's the first time, I've been having issues and I've never had such problems with either ACR or prior Olympus cameras and thus I'm wondering if this is some issue with how ACR interprets the E-M1 file. I did do some comparison with Capture One 7 and that does a definitely better job of highlight recovery in that it seems to more preferentially target just the highlights and definitely does a better job with color rendition.   I have Olympus Viewer 3, but it's so slow and lame, that I haven't done much testing with it.   Any thoughts and advice much much appreciated.

Also, you might want to upload your raw file, a full-size JPG of what you posted, above, and an example from C1 to www.dropbox.com and post a public link, here, for others to experiment with.

I have a new iPad Air. Can I use plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak. I'm off on holiday and haven't got the capacity to have everything on that I'd like for the kids

Can I use a plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak? I'm off on holiday and haven't got the capacity on the iPad to have everything on that I'd like for the kids.
So basically I want a hard drive with X amount of films etc on. Can I then watch them on my iPad?
Hope this makes sense.

External HDD won't work.
You need something like this:
http://www.seagate.com/goflexsatellite/

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Hi...i bought the new iphone 4 and would like to ask how can i transfer all my data from my old iphone to the new one? If I will do "synchronization" through itunes with the old phone and the plug in the new one will that be the case?

Follow the instructions in this article to transfer your info: iPhone: Transferring information from your current iPhone to a new iPhone

I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?

I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?

Did you choose the wrong back up? There should be a drop box when you go to "Restore from Back up" in iTunes and your iPhone is plugged in, on the Summary page. Choose the correct back up. If you can't find one, and you still have your device, back up your iPhone 4 again and then choose that back up. Or check for an old iCloud back up if you have one.

PE6 and ACR Plug-In 5.1

Similar Messages

Maybe you are looking for