PE7 (& 8) error message missing adobepsl.dll when writing to disc
I have been using PE7 exclusively even though I purchased PE8 since it didn't work on my Windows 7 64 bit laptop. I edited a video without any problems like usual and when I went to write it to a disc, it wouldn't write and I got an error message that it was missing or error occurred in adopepsl.dll. This was on the Windows 7 laptop. I then moved the files to a Vista laptop and tried it there but got the same error message. I read a lot of forums and articles here and so I created a new user specifically for PE8 on the Windows 7 laptop and installed PE8. I tried to write the project to the DVD and once again I got the same message. As a last resort, I created a new user on my XP desktop and installed PE7 since I knew that I had successfully worked with that one for almost 2 years without a hitch. I got the same error message on the XP:
AppName: adobe premiere elements.exe AppVer: 7.0.0.0 ModName: adobepsl.dll
ModVer: 11.0.0.1656 Offset: 000e0c83
Since it was three different computers and three different systems and I never had problems before either laptop before, I am extremely confused as to why all three separate computers would be missing the same exact file and get the same error message. I installed them directly from the DVD that I purchased new and had used it to install onto the laptops when I intially started using the program and then when I purchased the second (windows 7) laptop. And then to have it also happen with the PE8, which was also bought new but never used since it wasn't working on the Windows 7 laptop. (No, I did not update it since I went back to the PE7 because I knew that worked and I was in the middle of another project at the time and didn't want to jeopardize my project or my usage of the laptop.)
How is this possible that all three computers (and the PE8) are all having trouble burning to the DVD? Is it possible that it's a program disc problem but then why would the PE8 have that same problem?
desktop info (laptops are off and I'm exhausted after having dealt with this for over 12 hours):
windows XP
processor: intel pentium 4 cpu 3.00 ghz (2cpus)
memory: 1.37 gb RAM
Any suggestions? Unfortuanately, I'm not as "techy" as the rest of you.
Thanks.
Thanks Steve. I checked that article and I already do everything on all machines in your article except #4 of weekly and #1 of monthly. I have read your articles over time and have always found them informative. I've also gone to your website for information.
I do not have Adobe Bridge or Creative software. How do I correct all three machines so that it will write to a DVD? How do I get that file back?
Thanks.
Similar Messages
-
TS3074 error message 'missing MSVCR80.dll' when trying to open iTunes
Using Windows XP was unable to successfully download the newest version of iTunes on 30 January 2014. iTunes will not open on either of two PCs, a desktop and a Laptop. Reveived error message 7 (windows error 126). Tried several times, even uninstalled program and tried a new download.
Anyone else having this problem?Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99233) -
TS1424 I get an error message "missing msvcr80.dll". Can anyone help?
I'm getting an error message "missing msvcr80.dll". Can anyone help?
there are numerous threads on this... the latest update kind of messed up (I'm being polite here) and I found a good solution under the thread title
for all those having issues with the 11.1.4.62 update
I tried to copy & paste, but it's not possible on this site. -
Am getting error message missing MSVCR80.dll and itunes will not run
am getting error message missing MSVCR80.dll itunes will not run
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
When I right click the word file and select Convert to Adobe PDF, I get the error message "Missing PDFMaker files".
Im using Windows Vista Home Premium, Service Pack 2, 32 bit operating system.
Im using Microsoft Office Home and Student 2010
I have Adobe Reader X installed
ThanksHi RhodaMcP,
You might want to check the KB: http://helpx.adobe.com/acrobat/kb/troubleshoot-acrobat-pdfmaker-problems-office.html
Regards,
Rave -
Receiving error about missing VulcanControl.dll when starting Photoshop or Premiere CC
When i start Photoshop CC or Premiere CC it prompts CEPServiceManager telling me I am missing VulcanControl.dll and therefore the program can't be started.
Everything worked fine untill yesterday I installed Speedgrade CC and updated After Effects CC
In the Creative Cloud is now no longer lists Photoshop CC and Premiere CC as one of my apps
The strange thing is, I can't delete Photoshop or Premiere also.
What the .... went wrong and what can I do about it.
I'm in the middle of an importand project I have to finish tomorrow.
With kind regards,
Brian.CC desktop lists applications as "Up to Date" when not installed
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html -
Error message: missing ahclient.dll .... huh?
Pixel Bender downloads okay but when I right click the Adobe Extension Manager (ver. CS5) I get the error: "this program can't start because ahclient.dll is missing from computer. Try re-installing the program to fix". Does "program" refer to P Bender or CS5?
Can anyone assist me in getting Pixel Bender to run?
I am running: Win 7, 64bit. CS5, ver 12.0.3. Video card GeForce GT 430, AMD 64 x2, dual-core, 5200 with 4 Gig RAM.
downloaded: pixelbenderplugin_p3_pscs5_64bit_061711.xmp
Thanks,
Alanahclient.dll is the Adobe Help system. Since that isn't installed with PixelBender you'll need to try reinstalling CS5.
Bob -
When downloading iTunes I get error message that msvcr80.dll is missing. I can't uninstall iTunes. How do I fix the problem?
You have to uninstall everything! Check out Turingtest2 remarks
https://discussions.apple.com/message/24652557#24652557 -
When I tried to update Itunes I get an error message that MSVCR80.dll is not available? How can I fix this? I am unable to update my iphone and Ipod. I can not open Itunes.
Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
(98954) -
I cannot open iTunes as an error message states 'MSVCR80.dll is missing'.
I cannot open iTunes as it comes up with an error message the 'MSVCR80.dll is missing'. Can anyone help me fix this?
Try the steps in this user tip:
https://discussions.apple.com/docs/DOC-6562
If you continue to have problems, there are a number of other threads on the issue here this forum that may have additional suggestions.
Regards. -
I too cannot download latest itunes version. Apple needs to respond and fix what is certainly a software defect. Am seeing all of the same error messages including MSCVR80.dll is missing from computer. For Windows 7 a "Error 7 (Windows errror 126) appears. How do you get Apples's attention. It is impossible to link up with real support from their website?
Remove old Apple programs, and use Explorer web-browser. (Firefox or Chrome will not do)
-
I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I started iTunes & was asked if I wanted to ugrade, I said yes. When restarting I get error 7 missing MSVCR80.dll.how do I fix this problem?
Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
My iTunes update install failed. Error message says MSVCR80.dll is missing from my comuputer. What is that and where do I get it?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
error message missing file MSVCP110dll in CS6. happens when i go from LR5 to CS6
reinstall your NIK collection:
https://support.google.com/nikcollection/answer/3528247?hl=en&ref_topic=3001406
Maybe you are looking for
-
I just bought an IPod off of a friend and I'm trying to download Itunes. I keep getting Error 2908. I have to manually go into task manager to get the error messages to stop. This message shows up at the install screens. Any help would be appreciated
-
Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success. All
-
How come my iPod touch AND my iPhone will no longer sync with my iTunes?
for some reason the past few days ive been trying to back up my iPod touch and my iPhone 4s on itunes and its not discovering it. ive done all the steps on the support page. ive reinstalled itunes, ive shut the computer off and rebooted. rebooted my
-
Stored reference of mail sent through "SO_DOCUMENT_SEND_API1"
Dear experts, I am using FM "SO_DOCUMENT_SEND_API1" to send mails to external systems in a program for enduser. Now i want to trace which mails are send through this program. Is there any standard table where the reference for sent mails and its ret
-
Imac 17 inch c2d (64bit graphics card) display vs. mpb 15 c2d display?
hello, was wondering how my 17 inch imac c2d's display compares to the quality of the 15 inch mpb c2d? (ive heard all of the uneven illumination, ect ect) but can it really be worse than what the imac 17 inch displays offer? i just want to use a mpb