PE8 Can't Burn a DVD - "No burners detected" on Share Menu

I cannot burn my video to DVD because PE8 is not detecting either of my two DVD burners.
On the Share tab, Start a new share: Disc, the menu opens and on the Status line it has the yellow caution ! triangle and states "No burners detected."
I have a Dell Studio XPS8100 and W7 64 bit. The DVD RW drive works properly with other burning software. Thoughts?

Thanks, Bill. I appreciate the response but unfortunately it did
not correct the problem. I uninstalled Roxio, but Windows 7 seems to have a built-
in burn-to-disk feature that I cannot disable. Any other thoughts?
Thanks,
JS

Similar Messages

When i go to burn a dvd, it gives an error message "menu duration exceeds 15 minutes." how can i fix this??

When I go to burn a dvd, imovie displays an error message, "menu duration exceeds 15 minutes. How do I fix?

You may have too many chapters (scene selections), or perhaps one or more of the menus are looping for too long. Each menu in its standard form generally runs for no more than 30 seconds before repeating. In any of the menus have you inserted your own music that runs for a much longer duration? If so, using the Inspector, reduce the music time to 30 seconds (there is a slider you can adjust).
Regarding chapters - how many do you have in the project? You may need to delete some markers in your iMovie project. In most of the iDVD themes each scene selection page allows up to 6 scenes. So, for example, if you have 50 scenes marked, the theme would require 9 scene selection pages. I really don't know what the maximum is, but clearly you've run over the 15 minute limit for the iDVD menus. It may be a combination of too many chapters and music looping for too long on one or more of the menus.
John

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

I can't burn any DVD or CD - burning process interrupts before it ends

Hi everybody !
Sorry for my bad english, but I assume you're all aware about the frenches are not very good at english.
I've got the following problem: I can't burn any dvd or cd. I've already tried with different programs such as Sonic, Nero 7.0, and I Tunes, and I got every time a mistake wich interrupted the burning process before it ends.
So I don't know what to day ! I've already tried to re install the drivers, but it's didtn't change anything.
In order to help you, I've saved an error log from nero. I hope it could be helpfull to someone who could help me !
Here is the log:
moi
5C82001080000000000666822849
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <MAT****A DVD-RAM UJ-841S>Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAT****A DVD-RAM UJ-841S >Version: 1.60 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MAT****A DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MAT****A DVD-RAM UJ-841S D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2045MB (2095084kB)
Free physical memory: 1277MB (1308144kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.9.2006
CD-ROM (ISO)
21:04:46 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:04:47 #2 Text 0 File Burncd.cpp, Line 3007
MAT****A DVD-RAM UJ-841S
SmoothLink activs
21:04:47 #3 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
21:04:47 #4 Text 0 File Reader.cpp, Line 124
Reader running
21:04:47 #5 Text 0 File Writer.cpp, Line 113
Writer D: MAT****A DVD-RAM UJ-841S running
21:04:47 #6 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
21:04:47 #7 Text 0 File Burncd.cpp, Line 3301
Turn on Track-At-Once, using CD-R/RW media
21:04:48 #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 318786 ( 70:52.36)
21:04:48 #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
21:04:48 #10 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MAT****A DVD-RAM UJ-841S
21:04:48 #11 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:04:48 #12 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318787 (318787) = #318787/70:50.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAT****A DVD-RAM UJ-841S]
21:04:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: MAT****A DVD-RAM UJ-841S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 653182976, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318787 | lead-out | 1 | 0x41 | 0x00
21:04:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1126
Removed 2 run-out blocks from end of track 1. Length: 318787 -> 318785.
21:04:48 #15 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:04:48 #16 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
21:04:49 #17 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
21:04:49 #18 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
21:04:49 #19 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 24x (3 600 Ko/s)
21:04:49 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:04:49 #21 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:10:08 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:10:10 #23 Phase 33 File dlgbrnst.cpp, Line 1724
Simulation completed successfully at 24x (3 600 Ko/s)
21:10:11 #24 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 24x (3 600 Ko/s)
21:10:11 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:10:11 #26 Text 0 File MMC.cpp, Line 21541
Set BUFE: SmoothLink -> ON
21:12:16 #27 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 76 C0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 00 01 74 5D 0A 00 13 00 00 10
Buffer x03390000: Len x10000
0x72 F1 87 E5 D3 3D 4A 96 F9 B0 73 83 D3 14 72 A1
0xF3 49 6E 93 44 25 04 6D E5 CE 44 5F 3E C6 79 47
0xDD DD EA 3A FD 71 4D 32 CB 35 F3 DF 4B 18 BD 7D
21:12:16 #28 CDR -1040 File Writer.cpp, Line 302
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:12:17 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:12:17 #31 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
D: MAT****A DVD-RAM UJ-841S
21:12:17 #32 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
21:12:17 #33 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #34 SPTI -1040 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1040)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x10
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 13 00 00 10
21:12:30 #35 CDR -1040 File WriterStatus.cpp, Line 249
Illegal block size for command
D: MAT****A DVD-RAM UJ-841S
21:12:30 #36 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #37 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
21:12:30 #38 Text 0 File MMC.cpp, Line 16273
<MAT****ADVD-RAM UJ-841S > start Close Session
21:12:30 #39 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 AA 00 00 30 05
21:12:30 #40 CDR -1046 File WriterStatus.cpp, Line 249
Illegal disc
D: MAT****A DVD-RAM UJ-841S
21:12:30 #41 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
21:12:30 #42 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 24x (3 600 Ko/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 11:03:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So, thanks to you !
See you !
Romain

Hi
The error log doesnt provide any very useful information.
According to this error log the simulation was running correct but the burning process was not started.
In such case its very hard to say why it happens. Possibly the drive is damage and cannot calibrate the lens properly or you use not compatible medias.
The burning process depands also on the fiels and data which youwant to burn.
Some data, CD, DVDs are encrypted and its not possible to burn and to copy it.
In other case you could also try to burn the medias with lower speed and not with 24x.
But in worth case you the drive has a malfunction and you have to replace it ;(

How can I burn a dvd now that I can't download premiere pro cs6 with Encore?

How can I burn a dvd now that I can't download premiere pro cs6 with Encore?

Here's what you do to get Premiere CS6 + Encore:
Just click here (it's the same link as the more information link in CC.)
or
Go to your Creative Cloud application (on the menu bar) and go to Adobe Premiere CC and click more information
There is a dropdown menu that says "Adobe Premiere Pro CC" near the top.
Click it and the other option is "Adobe Premiere Pro CS6." Select that.
Now on the top right corner of the page it has a download button that says "Download Adobe Premiere Pro CS6."
It is included in your CC subscription.
However, a word of warning, you cannot use Adobe Dynamic Link to link to a Premiere CC sequence directly in Encore. A CS6 sequence still works fine, but if you have a CC project, you will need to encode your sequence into a DVD friendly format (MPEG2 file). I'm really hoping that Adobe changes this in their upcoming release, and just adds the ability to import CC sequences into Encore, then I would be fine with them not including it in the normal CC package, or updating it. But I haven't seen anything about it in the release notes.
A lot of people still want their DVDs and it's a lot easier to just dynamically link the sequence.

HT203164 Can I burn a dvd of a movie purchased in iTunes? I did it on DVD+R. Doesn't play anything.

Can I burn a DVD of a movie purchased on itunes? I did it on DVD+R. It did not work.

Rickydil wrote:
Can I burn a DVD of a movie purchased on itunes? ...
Not to play... But you can back it up as Data...
https://discussions.apple.com/message/6013415#6013415

How can I burn a dvd without themes?

how can I burn a dvd without themes?

(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps!

Can not Burn CD/DVD after update to 10.6.7

Since I have updated to 10.6.7 from 10.6.6, I can't burn a DVD or CD in the Super drive. I switched back to 10.6.6 and everything worked, switching back to 10.6.7, no burning can happen. The burn file locks and would not allow the lock to be removed from the "Get Info" in the file sec. Any solution? please help

Downloaded the Combo Update (other than the one intended for 'early 2011 MBP', and it will not run on this computer. Says something like it is not authorized, or not intended for this computer. Did re-run the update for 'early 2011 MBPs' same result. Was able to solve the font display issue, but not the incorrect icon issue, and FaceTime will not run at all. Says it is not designed for the OS I have on this computer, and will not even start. I have tried to go to the AppStore, just to see if I can download the latest version - no dice. Won't let me download it. Says FT already installed on this computer. Tried deleting FT, and then downloading - same message. ?????

Can't burn any DVD on my macbook pro

I can't burn any DVD on my macbook pro, also some of previusly burned DVD are not recognized now & cant be mounted. I tryed choosing different software Burn, KKitchen, Titanium Toast 11, LiquidCD, NTIDragonBurn_v4_OSX, ExpressBurn_i (also burn from Finder) and different brands of DVD -- same diagnostics -- Medium error. One brand (TDK DVD+R) is unstable burn one or two disc tnan begin spoil DVD discs. Have you any solutions?
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2,2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
OPTIARC DVD RW AD-5970H:
Firmware Revision:          3APE
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh

Have you read this post? may help you
https://discussions.apple.com/message/18149044#18149044

Can't burn bootable DVD. Err: Device not supporting this operation

I'm trying to create bootable DVD of Lion. The following error message pops up after clicking "Burn" under "Disk utylity":
"Unable to burn "InstallESD.dmg" (The disc drive doesn't support the requested burn operation)".
Can anyone help?????
More background:
1. Running clean&fresh install of Lion
2. MacBookPro i7 early spring 2011
3. DVD drives's spec:
                    MATSHITA DVD-R   UJ-898:
                      Firmware Revision:          HE13
                      Interconnect:          ATAPI
                      Burn Support:          Yes (Apple Shipping Drive)
                      Cache:          1024 KB
                      Reads DVD:          Yes
                      CD-Write:          -R, -RW
                      DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
                      Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
4. Media type (DVD) which I'm intending to burn it to: TDK +R, 16x, 4.7 GB
                      Media:
                 Type:          DVD+R
                 ID:          CMC MAG M01
                 Blank:          Yes
                 Erasable:          No
                 Overwritable:          Yes
                 Appendable:          Yes
                 Write Speeds:          2.4x, 4x, 8x
5. I was able to burn a DVD (to exactly the same DVD type) when doing the burn from under iPhoto and when launching the burn function in Finder ("right click" and select "Burn xxxx file to disc..."
6. BUT I am getting the above mentioned error message when attempting to burn the bootable DVD from under Disk Utilities. I'm following the steps recommended on various forums explaining how to make the bootable DVD drive. Briefly:
               a. placed InstallESD.dmg on my desktop
               b. launched Disk Utility. Verified (checksummed) the InstallESD.dmg file
               c. Press the Burn button
               d. The error message pops up.....
                    (The same happens with x8[max speed], x4, x2.4)

Thanks for the prompt reply. What you say is correct - the installer deleted itself after the instalation.
I then downloaded Lion again (another 8 hrs went by) from AppStore (using the "trick" with pressing "Option" button which changed "Installed" status into "Install" button) and therefore I DO have the Lion instalation content (including the mentioned .dmg file) on my computer ready for burning. (BTW, I've managed to burn a DVD with it from "Finder's" menu. I guess though, that such DVD will not work as the bootable one. Am I correct on it?
So, the status is that I have Lion's "InstallESD.dmg" file visible in the left side of Disk Utility window - the "Burner" (in Disk Utility) just doesn't want to start burning a dvd with this file. I need some suggestions on resolving it. Thank you in advance!

Can I burn a DVD with Leopard?

I just purchased a new MacPro and it should arrive in about 2 weeks. A simple question. Can I burn a DVD using the OS or do I need a seperate software package to do this?
I haven't used a MAC in about 20 years so I am a "newbie".

You can burn a data DVD with Leopard's Finder:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8398.html
or Disk Utility:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8729.html
and the Mac Pro also ships with iDVD which supports up to 2 hours on a 4.7 GB DVD, and over 3 hours on an 8.4 GB Dual Layer DVD.
Since I'm not as familiar with iDVD, you may want to post your question here if you plan on using it:
http://discussions.apple.com/category.jspa?categoryID=128
Other movie DVD software made by third parties offer additional capabilities.

Can't burn a DVD without Administrator Rights

Hi,
We don't allow our users to run with administrator rights on our domain. If we take away the admin rights, they can't burn a DVD, but if I do a RunAs Administrator on Premiere Elements, they can. How can I run P.E. without admin rights so they can burn a DVD? We are running Windows XP SP3, 32bit mode. Thanks.

Aside from Hunt's idea of writing the output to a folder and using the free Imgburn to write to a disc (have you tried that?) you have just run up against one of the design limitations of all flavors of Premiere... Elements and the various versions of Premiere Pro
The products are simply not DESIGNED to run in a network environment... they are meant to be used by one user on one computer, with full rights to be able to use all functions
I don't know what to suggest, but you may need to find a different product, if Hunt's suggestion does not work for you
Do note that I do NOT work for Adobe... but I've been reading these forums for many years, and the answers I've seen have all been the same... the products just are not designed to, and do not work in a network environment
Even using PPro/Encore CS5, due to Win7 settings, whereI am the owner and only user of the software, I must right click the Encore icon and select Run as Administrator when I want to create a dual layer DVD... but not when I'm creating a single layer DVD
For your situation... I've never seen a solution other than full Administrator rights to use all program functions

How can i burn a dvd of a slideshow created in iPhoto, how can i burn a dvd of a slideshow created in iPhoto

how can i burn a dvd of a slideshow created in iPhoto, how can i burn a dvd of a slideshow created in iPhoto. will not burn

Do you mean a slideshow in iPhoto '11 on your Mac?
And do you want to create a video DVD to play in a DVD player? This cannot be done completely in iPhoto, see this User Tip:
How to create a video-DVD? (Macs without iDVD): Apple Support Communities
and also Old Toad's post here:
Re: iPhotos to dvd...best way to burn them?
Regards
Léonie

Can't burn a DVD on Premiere Elements 12

At 98% media encoding the DVD is spit out and I get the following: internal software error:/premiere/elements/molecules/pre-mediacore/External/AuthorScript/Source
Any suggestions? I need the video for a class this week!

ATR,
Thank you for the reply and suggestions. I did some more researching and found a suggestion to remove the stop marker at the end of my video....and it worked! Apparently the stop marker causes an internal error. Mystery solved.
Thank you again for the ideas. I'm going to keep them on file for the next burn hic-up.
ibed
Date: Sat, 11 Jan 2014 22:12:58 -0800
From: [email protected]
To: [email protected]
Subject: Can't burn a DVD on Premiere Elements 12
    Re: Can't burn a DVD on Premiere Elements 12
    created by A.T. Romano in Premiere Elements - View the full discussion
ibed
What computer operating system is your Premiere Elements 12 running on?
Is this an external or internal burner?
Would you say that this is a case of "it worked before but not now" or "it never worked before"?
Although you cannot burn to disc DVD, can you burn your Timeline to folder. If so, the VIDEO_TS Folder from the burn to folder + ImgBurn to get your DVD-VIDEO on DVD disc may be your answer to this time crunch.
Let us start here and then decide what next depending on your answers.
Next step may be getting more information about your project settings and properties of your source media.
Could you post a screenshot of the error message that you are getting?
More details in the morning when we will be watch for your follow up.
Thanks.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6004504#6004504
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6004504#6004504
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6004504#6004504. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

PE8 Can't Burn a DVD - "No burners detected" on Share Menu

Similar Messages

Maybe you are looking for