PE8 Error Message: PE has encountered a problem [../../Src/importer/fileimporter.cpp-1136]

How do i get rid of it? it makes my program freeze immediately after i open it.
(Windows 7, HP 460z, 1tb hdd, 8gb ram, 1gb ati graphics)
It does it sometimes and others it doesen't.
Thanks in advance!

Still need you to confirm your project preset and the screenshots from the GSpot utility (link mentioned earlier).
The Preset is critical. If it doesn't match your footage details it will give problems - and it can't easily be changed once you've started the project. Here is where it is set (this PRE7 but 8 & 9 are similar). If you have not changed this since you started the problem project it will be the same as shows when you start a new project.
These are some of the choices and need to match your the details of your clip.
This is the GSpot window:
Just drag your project clip files anywhere in this window and then post a screenshot of the window. Here's an example of what we need to see (a trailer for the movie Shark Tale).
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

  • Error message firefox has encounted a problem and will close send don't send

    error signature code 0xc000000d flags 0x00000000
    When I go to the web I get this error message: Firefox has encountered a problem and will close send or don't send .When you click either it closes

    It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.
    If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

  • Continual Error message: iTunes has encountered a problem

    New iPad (first generation) owner here. Also have laptop with Windows XP. On it, everytime I open iTunes I get an error messsage reading 'iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error click here.' There's a 'Debug' box and a 'Close' box.
    Clicking on the 'click here' link brings up a new error message that reads "Error signature  AppName: itunes.exe  AppVer:10.4.080  ModName: corefoundation.dll ModVer:1.63014.0  Offest: 0004bd33. A line below that reads 'To view technical information about the error click here. There is a 'Close' button after that.
    If you click that 'click here' link  you get line after line of computese. After that comes to an end it says 'The following files will be included in this error report:  C:/DOCUME~1/Cheryl/LOCALS~1/Temp/7ffe_appcompat.txt and there's a final 'Close' button.
    I've tried every button a number of times.
    I've clicked 'Debug' - the computer 'thinks' a moment but nothing happens. I've Closed and reopened. Same song, 2nd verse.
    I updated iTunes. No change. I uninstalled iTunes and reloaded it. Same thing happens.
    I can't access iTunes or any part of it. I even had to google iTunes Help to locate this site.
    I can access iTunes on my iPad, but am unable to sync my iPad and Laptop.
    Thanks for being here, and for any suggestions you can offer.
    Alaska1000

    Clicking on the 'click here' link brings up a new error message that reads "Error signature  AppName: itunes.exe  AppVer:10.4.080  ModName: corefoundation.dll ModVer:1.63014.0  Offest: 0004bd33
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Add or Remove programs control panel, select "Apple Application Support", click "Change" and then click Repair.
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. Although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things):
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a window pops up

  • Error message "itunes has encountered a problem..." when it starts up...

    Every time I try to open itunes I get the typical windows message that says "itunes has encountered a problem and needs to shut down." I've tried to reinstall, but it still does it. Any ideas?

    hiya!
    Itunes has encountered a problem and needs to
    close
    the first thing that i check for when people report
    getting that message when they try to launch
    their itunes is a broken QuickTime.
    try to open your QuickTime. does it launch properly,
    or do you get an error message?
    if you get an error message, the first thing we'll
    try is a careful standalone QT 7.0.4 reinstall.
    download and save a copy of the QT 7.0.4 standalone
    installer to your hard drive. (we'll run the install
    from there rather than online.) switch off
    antivirus and antispyware applications prior to the
    install.
    Quicktime 7.0.4 Standalone Installer
    if that install goes through okay, does your itunes
    launch properly again?
    (if you get an error message on the QT standalone
    reinstall, let us know what it says. include error
    message numbers if you're getting any.)
    love, b
    That was it. You're my hero!
    Love you too,
    JRD

  • Error message: "iTunes has encountered a problem..."

    "ITunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    that is what it says when i open itunes
    WHAT DO I DO!!!
    I have tried re-installing, disabling norton, what else can i do???

    hi bballv32!
    okay, there's two main different possibilities with an error code 0x80040707 on an uninstall or a reinstall. (there are some much rarer ones, but we'll focus on these two at the moment.)
    (1) you can sometimes get it if you're installing a higher version of QT in a different user account from the one QT was originally installed in, or if you're uninstalling it from inside a different user account than it was originally installed in.
    (2) you can get it if the QT installation registry entries are damaged in some way.
    if (1) doesn't seem to be a factor in your case, let's try the standard treatment for (2). Download the Windows Installer Cleanup utility and use it to remove your existing QuickTime installation registry entries:
    http://support.microsoft.com/kb/290301/
    does the careful standalone QT install go through after you do that?
    keep us posted.
    love, b

  • Error message:  iTunes has encountered a problem and needs to close

    When I attempt to open iTunes I get that message. I recently had some work done on my computer and had stopzilla installed but I'm not sure if that has anything to do with my problem.
    I have re-installed and repaired iTunes.
    pls helP

    Hi!
    Thanks for responding. The error signature in the box shows the following:
    EventType: BEX
    P1: iTunes.exe
    P2: 9.2.0.61
    P3: 4c18061b
    P4: iTunes.dll
    P5: 9.2.0.61
    P6: 4c1805f8
    P7: 0004be7e
    P8: c0000409
    P9: 00000000
    I spent over an hour on the phone with support yesterday and nothing we tried worked. It appears to get hung-up when it's syncing (at 178 or 12521 songs). I'm desperate to get this fixed and appreciate any ideas or suggestions of things to try.

  • "error Report" "iTunes has encountered a problem and needs to close" HELP!!

    every time i try to load itunes i get this message
    "error Report" "iTunes has encountered a problem and needs to close". i have tried uninstalling and reinstalling. i tried removing quicktime through my control pannel and then reinstalling. ive tried running scans and pretty much anything else i can think of. at this point i might just return the ipod. anyone have any ideas.

    Have you tried uninstalling Quicktime? If not try that. If you are still having problems then do this.
    1. Uninstall both iTunes and Quicktime.
    2. Delete the folders iTunes and Quicktime where installed in.
    3. Reboot.
    4. Delete C:\Documents and Settings\<<Your User ID>>\Application Data\Apple Computer\
    5. Delete C:\Documents and Settings\<<Your User ID>>\Local Settings\Application Data\Apple Computer
    6. Delete if in your My Documents folder there is a folder called My Music with a folder in it called iTunes. Delete or rename the iTunes folder.
    7. Reboot.
    8. Turn off all anti virus and firewall software.
    9. Re-install iTuens.
    If you still get an error after that your Windows install is hosed. You will need to format and re-install it first.

  • I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I have had to uninstall itunes so that I could load this version, the PC says it is correctly loaded, but I now cannot open itunes. Advice?

    I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I had to uninstall itunes so that I could load this version as the update to version 11 kept failing. The PC says 11.1.1.11 is correctly loaded, but I now cannot open itunes. Any advice on how to get itunes working again?

    Hello there, ytnoj.
    Uninstalling and reinstalling iTunes can be a tricky endeavor and must be done in a very specific way. The following Knowledge Base article provides the step-by-step of the process:
    Removing and Reinstalling iTunes and other software components for Windows XP
    https://support.apple.com/kb/HT1925
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

    I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

    Hello dananbar,
    Thank you for the details of the issue you are experiencing when installing iTunes.  I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Acrobat XI, XP, startup message-Adobe has encountered a problem and must close

    Acrobat XI, XP, startup message-Adobe has encountered a problem and must close
    Uninstalled Acrobat 9
    Restarted computer
    Loaded Acrobat XI
    Start Acrobat XI
    Produces - Adobe has encountered a problem and must close

    Initially installed Acrobat IX with trial selected
    (Acrobat activation code was not entered)
    As suggested:
    Uninstalled Acrobat
    Ran Acrobat cleaner
    Disabled antivirus
    Restarted Computer
    Loaded Acrobat IX with trial selected
    Restarted Computer
    Attempted to open Acrobat and received
    Adobe has encountered a problem and must close
    To avoid any activation issues
    Uninstalled Acrobat
    Ran Acrobat cleaner
    Confirmed antivirus, disabled
    Restarted Computer
    Installed Adobe Reader IX
    Restarted Computer
    Attempted to open Adobe Reader and received
    Adobe Reader has encountered a problem and must close

  • Error message -ITunes has detected a problem with your audio config...HELP

    error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
    ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help me

    I've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
    First ...
    ... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    Next ...
    If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
    Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area?

  • Error message- "LR has encountered problems reading this photo" after installing LR 5.6 on new computer and retrieving all contents from old HD from external HD.

    Hi-
    I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo.  You will not be able to make adjustments to this photo".  I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate.  The other threads suggest there is a corruption with the file, but I don't THINK that is the case.  Are there any other suggestions?   If the file is corrupted, how do I find out for sure?  Have I lost all my edits?? 
    Thanks for your help and time!
    sarah

    Hi-
    I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo.  You will not be able to make adjustments to this photo".  I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate.  The other threads suggest there is a corruption with the file, but I don't THINK that is the case.  Are there any other suggestions?   If the file is corrupted, how do I find out for sure?  Have I lost all my edits?? 
    Thanks for your help and time!
    sarah

  • I have installed iTunes on my new windows 7 dell laptop every time I start it it comes up with an error saying itunes has encountered a problem and it closes ? any answers have tried command prompt reset and it has not resolved it also un/reinstalled

    I have installed iTunes on my new laptop OS Windows 7. I have two iphones, a 3rd gen nano and an ipod classic.
    Since the install yesterday I keep getting an error message which itunes has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a soluion is available.
    I have un and re installed and followed a command promt reset.
    I still have the problem. Any ideas?

    Ok. So I created a new account and iTunes did work. I went back into my original account and tried again and just to be more clear, after I open iTunes it asks me to accept or decline the agreement, I do that, then it says "updating library", and then one all the bars are full it closes and says "iTunes has encountered a problem and needs to close."
    okay, let's start working through the user-account-specific causes of this message.
    one possibility is damaged itunes preference files in the user account in which you're getting the crash. (there's a different set of those in each different user account, which is how we can get crashes limited to a single user account.)
    if that is what is going on, we can often get past this by rebuilding the preference files in the account that is crashing. for the preference files rebuild technique, see my reply to kusma in this post:
    b noir: Re: iTunes 7.0.1 crashing

  • JavaTutor.3.x  error -jre.exe has encountered a problem

    What transpires�
    1. I click on the JavaTutor.3.x shortcut which was installed by courseware supplied by Sun Microsystems through EDS University
    2. Within a second or two, the error message box appears, and states: "jre.exe has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here"
    3. When I "click here", the Error signature box appears containing the following information:
    AppName: jre.exe
    AppVer: 0.0.0.0
    ModName: unknown
    ModVer: 0.0.0.0
    Offset: 00010100
    4. This same dialogue box has the followng option: "To view technical information about this error report, click here." When I "click here" the following information appears:
    Exception Information
    Code: 0xc0000005
    Flags: 0x00000000
    Record: 0x00000000000000000
    Address: 0x0000000000010100
    System Information:
    Windows NT 5.1 Build: 2600
    CPU Vendor Code: 00FD0094 - 30024678 - 00000001
    CPU Version: 00000F27
    CPU Feature Code: BFEBF9FF
    CPU AMD Feature Code: 00E9E850
    Thoughts?
    -clark gordon

    I too, am having the same issues as posted above. Here is what I have learned:
    1) The software runs fine on a P3 1GHz system. (WinXPpro)
    2) The software runs fine on a Celeron 500MHz system. (WinXPpro)
    3) The software does not run on a P4 1.8 system (Win2K)
    4) The software does not run on a P4 2.8 laptop (WinXPpro)
    5) On the systems that the software fails to run (P4s), the script changes above do not help.
    I am not much of a 'coder', but I am wondering if the software is trying to write to a memory location (L2, maybe) table that was writable on pre-P4 processors, but is not writable on P4's. Please forgive if I am totally off the mark here. Again, I am not much of a programmer.
    I am counting on all of us teaming the solution for this. Please update this thread if you find a fix.
    spider51

  • Export op results in  error "EXP.EXE has encountered a problem and needs to

    I have been working with Oracle Designer on an old computer (running Windows 2000 and an Oracle 10.2 database) and I am attempting to get it to run on a newer computer (running Windows XP and an Oracle 11g database (release 11.1.0.6)). Regarding the Designer version, I installed the same version (9.0.4.3) that was running on the old computer. On the new computer, features of the tool have worked (ER Diagrammer, DB Design Transformer, Design Editor), but the Export operation of the Repository Admin Utility did not work. When I attempted to run Export, the following happened:
    (1) The "Save As" dialog was displayed (as expected).
    (2) A EXP.EXE script window opened for the Export command and displayed the following:
    Export: Release 9.0.1.5.1
    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    (3) Immediately, an error dialog appeared stating "EXP.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
    I am testing Export so that I can test Import, which is the operation I will need to load data from the old computer.
    Any ideas how to fix this problem?
    If it can't be fixed, are there other ways of transferring data from one repository installation to another?

    add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

Maybe you are looking for