PE8 splits scenes on capture, no matter what

Trying to capture a 60-minute DV tape and PE8 splits it into 71 little bits every time, no matter what capture options I select.
Scene detection on or off, doesn't matter. I wouldn't mind scene detection if it was a little smarter, but it looks like every time I start/stop recording at a kids football game creates another scene. Since I only record the play, not the time between, it creates an awful lot of files to juggle, quite the pain.
I'm about to report this as a bug, but maybe there's a setting somewhere else that I'm missing... anyone?

File system is NTFS, I already have many clips over 2 GB on my drive.
I try to turn off scene detection by un-checking the "Split Scenes" check-box in the capture window, but it still splits the clips.
I've watched it split the clips right during the capture, when "Capture to Timeline" is enabled. The timecode keeps counting right along, so it's not a break in the timecode that's causing it. Each football play, where I've stopped recording with the pause button, then start again at the beginning of the next play, is turned into another scene.
It appears that this problem existed in PE7 as well:
http://forums.adobe.com/message/2171783#2171783
Anything else to consider? It seems like, since Grisetti and Wine Snob have already responded, that this is indeed a bug and I should report it appropriately.
ScenAlyzer Live, here I come...

Similar Messages

[svn] 1384: Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is us

Revision: 1384
Author: [email protected]
Date: 2008-04-24 07:54:58 -0700 (Thu, 24 Apr 2008)
Log Message:
Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is used.
Also improving [Embed] so that it can recognize .TTC files as assets (previously these were only recognized through CSS @font-face rules).
QE: Yes, please add a test case for using [Embed] to embed fonts from a TTC file in addition to our tests for @font-face. Note that the AFEFontManager must be configured for this scenario.
Doc: No
Checkintests: Pass
Mxunit: AtEmbed Font suite: Pass
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/AbstractTranscoder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/FontTranscoder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MimeMappings.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/CachedFontManager.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/Dictionary.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/MovieEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagHandler.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagValues.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/builder/tags/FontBuilder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontAlignZones.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontInfo.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java
Added Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFont3Face.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont1.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont2.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont4.java
Removed Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFontFace.java

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment detail

Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

I bought a new computer, and iTunes doesn't have my music or anything on there. I want to get everything on my iPhone to my new computer/itunes. But no matter what i do, it won't let me. My desktop has everything, and I want all that on my laptop..

I bought a new computer, and downloaded iTunes, therefore the new itunes doesn't have my music or anything on there. I want to get everything on my iPhone to my new computer/itunes. But no matter what I do, it won't let me. My desktop has everything that my phone has on it, I just want it all moved to my laptop. Does that make sense? I could really use some help. I don't live with this desktop anymore so I need to be able to use my laptops itunes. Please help me. Thanks in advance!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Flash player refusing to work no matter what I do. Been going on for months now. Help?

Windows 7 (64 bit)
Chrome (32 bit) (ver. 27.0.1453.116 m)
Flash 11.7.700.225
It seems like, no matter what I do, Flash player will not work. Keep in mind that I have already tried disabling/enabling both the plugin that comes with Chrome, along with the plugin that you can manually install from Adobe, and that alone doesn't solve my problem.
If I try to play videos on Youtube, I get one of four results:
1) "This video is currently unavailable," which can come up if I have one of the plugins enabled. I can sometimes solve this by disabling both plugins, but that only works about 25% of the time.
2) The Youtube player just shows black and nothing else. No audio/video and no indication that anything is playing. Like with #1, this can also come up if I have a plugin enabled, and can sometimes be solved like in #1. But again, this only works semi-occasionally.
3) I get the prompt to update my flash player. This can come up if I have both plugins disabled, and I have yet to find a solution for it (yes, I've already uninstalled flash with Adobe's official uninstaller, and reinstalled it to confirm I have the most recent version). If I enable any of the two plugins, I get an error message like in either #1 or #2.
4) The video plays fine. This only happens about 10% of the time, and is split half/half in terms of requiring the plugin on/off.
So far, I have done the following in order to solve my flash problem, to no avail:
-disabled/enabled both plugins (mentioned above)
-uinstalled/reinstalled Flash Player using Adobe's official programs (mentioned above)
-tried using Firefox
-tried using the HTML5 player as an alternative (never works)
-disabled/reenabled every plugin one by one
-disabled/reenabled all extensions, and even tried browsing in Incognito Mode
-tried making an exception for Flash in Windows Firewall
-scanned for and cleaned up any viruses/malware/adware/spyware

Mecha Panda wrote:
2) The Youtube player just shows black and nothing else.
The first thing I would try is to update the graphics drivers; see http://forums.adobe.com/thread/945765

After firefox loads, the first web pulled in takes 4-5 minutes, then all the rest of the webs work normally. It doesn't matter what web i pull in first. I have norton360.

After Firefox loads the home page (google), the first web site I click in my bookmarks takes 4-6 minutes to come in. Clicking on screen makes it go half-tone until it loads. From then on, all other bookmarks come in fast. It doesn't matter what bookmark I load first, it always takes major minutes. I am using Norton 360 and have even disabled the security and web checking and it made no difference.

Okay, here's what I found out. Followed the above instructions...no joy. I think this maybe needs to be posted in a general OS forum, as I'm thinking this is more about that vs just being about iPhoto/iTunes. Here's what I tried and learned.
A new account allowed iPhoto to open up immediately. However, iTunes seemed a touch slow...not sure if that is just due to it being a new account. So, I deleted that account and moved on to the preferences instructions above.
I removed all preferences and placed them in a "preferences A" folder on the desktop. Launched iPhoto and got the exact same results. Super slow...took forever to open. Took forever to close. Same with iTunes.
So I placed all of the removed preferences back into the folder and decided to start launching and closing apps to see what's affected, what's not. Here are the findings.
iPhoto - The worst of all. Takes 4 minutes to open.
Mail - Opens fine, closes very slowly...apprx 1 minute
Calculator - This now opens incredibly slowly. Also noticed that the blue light below a launching app in the dock that seems to radiate was not radiating immediately....just sort of sat there. About a minutes passes, then it radiates for a second and calculator opens. Quitting is instant
Garageband - Launching is slooooow, quitting is instant.
Lightroom 3 - quitting is slow....quit results in upper-left menu items flashing once, then beach ball for about 30 seconds.
These apps check out perfectly fine with no problems launching or quitting: iCal, Safari, Firefox, Aperture, Photoshop (CS3), Illustrator (CS3), InDesign (CS3), Acrobat, Suitcase, Image Capture, Disk Utility, Text Edit, Photo booth, Final Cut Pro.
So I'm at a loss. This may be more of an OS issue, but figured I'd post here to follow up on the suggestions given. I think I'll pose a question in the OS forums. I'm thinking this might mean boxing up the iMac and making a trip to the genius bar. It's incredibly frustrating.

30GB won't work...no matter what :-(

My 30GB black iPod hasn't worked in days, it won't respond. I thought the battery was fully drained so I left it plugged into the computer all night and I wake up to see it still doesn't work. The computer didn't even recognize it, no removable hardware device icon was showing. Just to be on the safe side, I tried the thing two days later (so the battery fully discharges) on my laptop and still no response what so ever. The thing isn't on hold, and I've ran through the most the common 5Rs of solving iPod issues. The unit is less than 5 months old and has never been dropped, gotten wet, or anything else that would remotely cause harm to it. Any suggestions here?
Dell Inspiron 2200 Windows XP

(Re: Mic won't work no matter what I try!? I figured out the Source - mic thing after your previous message just by playing around a bit. I came to the conclusion that it was the same as accessing in the Windows mixer Playback panel though, so I knew that couldn't be the problem.
On a daily basis, I listen to DSS or WAV files through the A2ZS.
I don't know how to find out the impedance of my mic.
I don't know how to tell if there is an integrated (onboard) soundcard that is still enabled. Here's what shows up in my Sounds & Audio Device Properties: Unimodem Half-Duplex Audio Device, Creative SB Audigy, Creative Game Port, Audio Codecs, Legacy Audio Drivers, Media Control Devices, Legacy Video Capture Devices, Video Codecs.
Interesting to note that about 2 weeks ago, I used my Camtasia Studio software to make a video and I was able to record my voice through the microphone without a hitch. I've been racking my brain and can't think of anything that changed between now and then.

No matter what I do I cant delete itunes from my computer so I can install newest software.

no matter what I do I cant delete itunes from my computer so I can install the newest software?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

IPod basically unusable. No memory no matter what I do.

Hi, I bought my iPod around late December, In the past few weeks, the memory has ran out preventing me from buying any more apps or songs, or taking photos. App use was difficult as well. Now, no matter what I delete, the thing still does nothing. I'm afraid to delete my app that uses the most data, because chances are; that won't work either. I'm feeling very annoyed and betrayed by Apple now, And worst part is: I can't even transfer my old photos to something on my computer because I'm gonna reset the iPod to get my memory back. What am I supposed to do??

Only photos/videos in the iPod's Camera Roll album show up in the DCIM folder. Where are the photos on the iPod?
You can try using the computer's camera/image capture program to get the photos/videos from the Camera Roll album too.
iOS: Importing personal photos and videos from iOS devices to your computer
Also, photos/videos in the iPod's Camera Roll album are included in the backup so retoring from backup will restore those
iOS: How to back up and restore your content

FMLE 3.2 MAC - hard cap of 16 fps no matter what

I'm running FMLE 3.2 on a Mac Pro with 2 quad core CPUs and 6gb of RAM. I'm capturing with a Black Magic Design Intensity Pro. I'm able to capture using Final Cut at 720p and 60fps with no problems.
However, in FMLE, no matter what settings I choose, the capture frames per second seems restricted to 16 FPS. I've tried change the Encoding Options Frame rate - whether I set it to 60 or 30 or anything else, always encoding actually occurs at 16fps. I've also tried changing the bitrate, output size, and tested both streaming to FMS, saving to disk or both together.
My CPU isn't breaking a sweat during the FMLE encoding process to I know its not that. Anyone else had any issues like this?

Not sure I can help you but I´m on mac too (single quadcore cpu) got the same BM capturecard you have, I use camtwist and the 3.2 for my broadcast to justin.tv.
If I set my fps to 25 it push through pretty much the same or just a little under, it can vary over time though but not much. Guess it depends on my bandwith I´m getting at the moment how much it would change. All the settings in FMLE will probably affect your fps so I think you need to try different combinations with the settings.
If I for example go over 30 fps, increase my kbps to high and use to big input and output size my fps can drop really low. But with 25 fps VP6, 800 kbps, output 720*404 I can go as high as FMLE let me with the input. So there seem to be limits and combinations one need to figure out to make it run the best it can depending what hardware one might have.
For example in my case my upstream at the moment is just round 2 mbps so that make it useless to go over 800 kbps, so there´s one limit that affects things.
My audio is set to 44100, 224 and stereo.
Sorry I can´t help more.
Good luck

Splitting scenes

Hi everyone
Awhile ago I had made a post regarding the split scene issue with PPCS5 and JVC GY-HD100. Back then it turned out that it was a Premiere software issue. My question is: will OnLocation be able to capture footage from my JVC with automatically split scenes or do I need an external software to do this?
Thanks a lot in advance

If you are talking about capturing from tape, with scene detection, then OnLocation has no such feature. OL is designed for live monitoring and recording; while it works for capturing from tape, it's not really designed for that, and there are other products on the market that fill that niche quite nicely.

How do I fix my MacBook Pro that continues to abruptly turn off, no matter what I am doing? Even after deleting items/trying resolution methods?

How can I fix my MacBook Pro? I have a relatively recent model of the MacBook Pro. I’ve been running Mavericks.
For the past few days, it has been randomly clicking off by itself, I guess crashing. I would be online or just doings on it, sometimes nothing at all, and the screen would go black, the computer would turn off. Then, I would proceed to try to turn it back on, and it won’t turn on for several minutes, no matter what buttons you push. I tried doing an SMC reset for myself. It did not help much. I deleted all my personal files, including plug-ins, especially flash player. I thought that helped, but the computer proceeded to turn off minutes later. Then, out of frustration, (as I have done twice or so before since having the computer) I did what may be called a factory reset for my computer. I erased the current operating system information/memory in disk utility, and then went on to reinstall OS X. This was working fine, and then, a few minutes into the downloading process, my computer turned off once again.
Now, I have no system to operate on. I keep turning the computer back on to try to do it again. But now, the computer tries to do a remote or internet recovery, and tries to re-download an operating system using my WiFi. I’m sure this would be successful, but the computer can’t function for more than a minute or two without crashing/turning off.
I am fairly certain that my power button is NOT stuck.
I did earlier notice the fan making noise, before doing the SMC reset.
The computer did seem to say there was no batteries available at one point.
(But all of this was okay after some point, and I was just doing the reset to try to correct the turning off the system was still doing)
A week or two ago, I did have a glitch where my desktop picture was flashing and acting weird, and other functions on my computer keyboard not working, like volume, keyboard brightness, etc. But I did fix it.
I have not ever had much on this Macbook pro. I do not download applications. I do not store nearly any files on the computer. I usually only use the flash player plug-in. This computer is only used for doing work/business, and for personal use online.
I can’t see why I would have so many problems.
Is it possible that erasing the memory twice or so before is causing an error or issue in the drive?
What is the root of this problem, and how can I fix it on my own?
I can’t really make any progress on the computer since it turns off after only a minute or two no matter what you are trying to do.
What do I do now?

kapots3v4,
if your MacBook Pro doesn’t stay active long enough to perform an OS X Internet Recovery, then you should make an appointment at your nearest Apple store or Apple-authorized service provider to have them diagnose what’s ailing it.

I can not view emojis correctly on my brand new iPhone 6 and happens no matter what generation phone and my txt are freen when I send them to someone instead of the normal color. Plz helpu

I can not view emojis correctly on my brand new iPhone 6 and happens no matter what generation phone and my txt are freen when I send them to someone instead of the normal color. Plz helpu

Hey John,
If you are having an issue with emojis on your iPhone, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting emoji issues - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

In the Options box, no matter what I set my Home Page to (Current Pages, Blank Page, Default) I am unable to change my homepage settings; they absolutely will not change and I can't figure it out.

Up to about a month ago, I never had any problems setting my Home Page to Using Current Pages. Then, all of a sudden, I am unable to make any changes to my Home Page no matter what I change the settings to. I work for the US Forest Service and I don't know if some program was loaded that prohibits any changes from being made. Any help would be most appreciated.

This link may help - https://support.mozilla.com/kb/Preferences+are+not+saved

Keyboard lights will not stay off no matter what I do on my MacBook Pro. Why??

I've got a MacBook Pro 2.4 GHz Core 2 Duo.
I have ALWAYS left the keyboard lights off for the 4 years I have had it.
But lately, no matter what settings I change or what I try, I cannot PREVENT the keyboard lights from coming on when I've been away from the computer for a long period of time.
Automatically illuminate keyboard in low light is NOT checked in System Prefs. I have reset the PRAM, and left the laptop off with the battery off for hours in hopes of resetting it.
Nothing will work. Almost every time I am away from my computer for hours, I come back and the keyboard lights are on. And when I tap the keyboard light brightness buttons, it just gives me the buster symbol (white circle with a line through it) on screen below the keyboard light brightness indicator for a few seconds. Somehow continuing to tap those buttons eventually makes the lights just turn off. Or holding my hands over the whole keyboard to trigger the sensor can suddenly allow me to control the on/off brightness with those buttons again. In which case I try turning the lights off completely or turning the brightness so low that it goes off.
But once again, when I wake up in the morning, I find the keyboard lights on.
Now the ONLY thing that has changed since this started happening is that I added a new User account. BUT that should asbolutely not cause this problem. I have checked to see if the System Preferences for the keyboard lights in the new user account were causing a conflict, but no, they are exactly the same as my main account.
I have not tried deleting the user account yet because I actually want it and would find it very hard to believe that was the culprit. It's just the only thing I can think of that changed shortly before this started happening.
Is there anything else I can do!?! Is there some preference file that controls the lights somewhere that could be corrupt that I need to trash?
Thank you for any help anyone can provide. This one has stumped me good.

From reading up of other forums with the same problem i have come up with two reasons why it is doing that.
first try doing a smc reset
if that does not work then it is a hardware error. Many people have had the problem and they have not been able to fix it so good luck

PE8 splits scenes on capture, no matter what

Similar Messages

Maybe you are looking for