PE8 wont render, line stays red!

Sorry, got another problem. When I hit the Enter key (or go thru Timeline, Render work area) the little render box pops up, it has a think, but the % stays at 0%, and when the box dissapears the line in the timeline is still red.. not green! Aaaahhh!

Please tell us more about your Assets - your source video Clips. The full specs. would be useful, along with the process that you used to get these onto your computer and then to Import them into PrE. If needed, G-Spot can give you all the file info.
Next, please tell us about the Project Preset chosen at the time you did New Project. Does this match your Assets 100%?
Last, how much defragmented free space do you have on your HDD? How is your HDD formatted, FAT-32, or NTSF? Render files can be pretty large.
Good luck,
Hunt

Similar Messages

Choppy playback, when render line showing gray (niether green or red).

Hello,
Initially the render line shows red and gray in some parts. When I render the movie the red sections do turn green, but the gray portions remain gray. Playback is fine while in the green areas, but stalls and becomes extremely choppy when passing over the gray areas (I've posted a phicture to help make my explaination a little clearer). Does anyone know a fix for this?
Thanks,
Nadine.

Vid_2011
What version of Premiere Elements are you using and on what computer operating system is it running?
Without further information, there is nothing to fix. See explanation to follow.
The area of the Timeline over which the green line appears tells me that you
(a) edited original video which presented with no color line and the edit forced the red line which you "rendered" to green.
(b) Or, you had content that imported originally to present with the red line over the content and you rendered to green.
A video properties and project preset mismatch.
What are the properties of the Timeline over which your "gray" no colored line situation exists? At face value, they could be imported media that imported with no colored line over their contents, and you have not edited yet. Please detail the situation so we know the real situation.
Just in case recap....
no colored line over Timeline content (only seen on first drag before edit of content) when native format and project preset is set to match the properties of the source media. The program is telling you that you have the best possible preview. So, no rendering is needed or possible. If you edit this type, the indicator line turns red and rendering/edits/rendering thereafter involve only red green changes, no more no colored line.
green line over Timeline...you have the best possible preview, no rendering is needed or possible.
in versions earlier than 11, red line indicates need for Timeline rendering to get the best possible preview. After the Timeline rendering, the red line turns green with all the implications stated above.
In versions 11 and 12, the red Timeline render indicator is no longer and now is an orange line.
Please review and consider and please get back to us with more details as to what is in the tracks below the render indicator lines.
Thank you.
ATR

Red Timeline box. Not render line entire timeline box turns red

I ran into an issue on Premiere Pro cs3 after updating my mac to Mountain Lion. No issues until update. The entire timeline box turns red when I insert a video. Not the render line but the entire box turns completely red. anyone have any ideas?
I realize I need to update, I am a college student, but I do freelance for a nonprofit so I need this up and running as fast as I can.

That SEEMS like a case where your graphics driver needs to be updated... but NO way for anyone to tell without hardware information
More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
ADDED
IF you have nVidia (you did not say) read
Mac & nVidia Driver http://forums.adobe.com/thread/1075592

Aspect ratio and render line issue

When I overwrite the video from the source (top left) window to the timeline, it is changing the aspect ratio and a red 'render' line is appearing on the time line.
The video is now zoomed in and pixelated.
I have not had this issue while editing with my other files and the settings seem to be correct. Am I missing something super obvious?

The PPro tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5
Look for the NEW ITEM information on page 5

Audio-only seq's edited into into timeline show as unrendered, wont render

I'm using FCP to do simple audio edit assembly projects.
One main question and two followups.
I have some audio only sequences in the bin. When I drag one to the timeline directly, or edit it into the timeline by dragging to viewer, or any of the other ways to get it into the timeline, it comes in as unrendered, with the red bar at top, although it was rendered when I edited it into the tl.
When I try to render, it wont render, and just plays with the beep beep beep sound. However, scrolling the clip in the timeline, I can hear quietly, the audio scrubbing.
Only way I could work around was to pull a sequence to the timeline, double click it, which then opened the original sequence again in the tl. I then was able to highlight and copy the material, switch back to the sequence I was assembling, and paste the audio in.
Any suggestions as to why the sequences edit into the timeline unrendered, and how to bring them in so they are rendered, or how to render them?
Followup question 1:
What's the significance of some clips in the timeline display their color as light green, while others have the color light blue? And why do some clips show audio waveforms while others do not?
Followup 2:
I recently lost the media files to some audio-only sequences. However, when I went to play the sequences, they played, even though the media files were gone. Was the sequence playing using the Audio Render files? I am guessing that when I altered the level of the audio, new files were created in the Audio Render bin, and the sequence was playing off those render files. Question 1 above doesn't involve lost media files, for that situation all media files were in tact.
Power Mac G5, Dual, 2 GHz Mac OS X (10.3.9) FCP 4.5
Power Mac G5, Dual, 2 GHz Mac OS X (10.3.9)
Power Mac G5, Dual, 2 GHz Mac OS X (10.3.9)

1. Depending on what you're trying to accomplish, you might be best off opening the sequence you want clips from and copy/paste those clips into your newer sequence...this will require rendering.
AFAIK, the only way to avoid re-rendering is to duplicate the sequence in the browser (retains renders)...but from what you describe, you're trying to integrate previous sequences into newer ones, so may not benefit you.
You could duplicate the sequence 'A', then build upon that in sequence 'B'...again, really depends on your end goal.
2. The reason you're getting different colors in the top render bar, is the different levels of rendering FCP is seeing as needing to be done. Go to your Sequence Menu and check off all available types of renders. Now when you render, it should render everything.
3. Yes, you're probably getting playback from already rendered files. If you delete all renders with Render Manager in the Tools menu, you'll likely lose them.
K

Orange Render Line???

What's the orange render line mean? I recently changed a couple of my settings for a new project and now when a clip needs rendering I see an orange line instead of the usual red one.
Bones

What's the orange render line mean?
It means you can SORT OF play back in real time.
You will see an approximation of the final product.
Option-P plays back the real deal but only as fast as your Mac can handle.
Al

I have my new music which i downloaded in my itunes library but when i go to move it to my iphone music folder it wont move and a red circle appears?

i have my new music which i downloaded in my itunes library but when i go to move it to my iphone music folder it wont move and a red circle appears? i have tried all different copy and paste but it still doesnt work

Drag and drop only works if "Manually manage music" is selected on the summary tab in iTunes.
Instead, use the Music tab and playlists to manage what content is on the device as described in the User's Guide.

Fonts in some websites wont render

I got the interface fonts to render, and they seem to work fine, but some (a lot) of websites text wont render at all. The problem seems to be in the way it handles CSS, that if a font listed in font-family is not installed on the system, it just wont render the text, instead of skipping ahead to the next font, or falling back on the default.
I found on my site if i set the font to something on the system, it will render.
Anyone else had any similar problems?

Sounds like the same problem I was having - a possible solution can be found in this thread: http://discussions.apple.com/thread.jspa?threadID=993285&tstart=0
Windows XP

Imovie templates, titles, ken burns effect wont render. why?

Hi I am having great issues.
Once my templates or ken burns effected pictures are in a timeline they wont render. Ive tried everything, but no rendering takes place. Just sits there and does nothing.
Ive even tried wiping imovie and reinstalling still does the same thing help!!!

Hi gregles76 - welcome to the forum!
Two possible angles on this:
1. You are not applying the KB effect correctly - make sure you are following the procedure shown in this tutorial:
http://www.apple.com/ilife/tutorials/imovie/im3-2.html
2. Were you trying to change the setting on photos that already have a KB effect applied? If you were, and you have emptied the iMovie trash after creating KB effects on your photos, you will not be able to further modify the setting, because of the way iMovie deals with the photos.

As of today Iphone 4S wifi wont turn on, stays gray. IOS 6.1.3

As of today Iphone 4S wifi wont turn on, stays gray. IOS 6.1.3

Most likely it's a hardware failure if it's both WiFi and BlueTooth. There are some strange suggestions to try; if these don't work take it to an Apple store for exchange. If it's out of warranty it will cost $199.
Turn off Cellular Data, reboot the phone. try to turn on WiFi.
Put it in a ziplock bag with the air squeezed out, then in a freezer for 15 minutes (yes, this is not a joke).
The opposite: Heat it with a hair dryer for a couple of minutes.
All of these have worked for someone, but not for most.

IWeb will not Publish. The publish icon stays red and no changes are made. Please help.

The question says everything. When I click "publish site," the world icon at the top of the screen stays red (instead of whirling about and turning blue), and no changes are made. When I exit the program, it says, do you want to exit while changes are still being made?
This is confusing, since nothing seems to be uploading according to the icon. The website really needs to be updated and I welcome and appreciate any and all help. Thank you.

See this page for an axample of publishing settings...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
If this doesn't get things going try the second method - publishing to a local folder - to see if that works.
See this page for more troubleshooting info...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and this one for info about using iWeb with Lion/Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

HP Pavilion dv6 speaker light stays red, unable to hear sound

I have a HP Pavilion Dv6 Notebook PC Product # QE071UA#ABA. The light on the speaker button (F11) stays red when I tap on it, but I can see the sound bar and icon in the center of the screeen. I am unable to use the mouse to adjust sound. When I hover over the speaker Icon on the toolbar it says that no speakers or headsets are plugged in. When I click on the icon, It tries to trouble shoot the problem, but itc an not detect the problem. I have shutdown the laptop. unplugged the AC and battery, held the power button down for 60 seconds, plugged the AC and battery back in and restarted the computer. I have also ran a system restore back to before a critical update on 8/27/14. So far nothing has helped. The AMD high definition audio device states that it s working properly. Laptop has Beats Audio. Using Windows 7.
Thank you for the help.

Hi,
The AMD driver is just related to audio over an HDMI connection - for your main audio through the internal speakers or headphones, this is provided by the IDT HD audio driver, so try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52658.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device ( if it's listed ) and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shutdown the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Print screen and Function "fn" key not working.Mute button stays red constantly.

Hi,
I bought an hp pavilion dv6-2154ca two weeks ago. It has windows 7 64-bit, nvidia Geforce 210m 1Gb graphics card, and my function "fn" key is not working at all. I downloaded the quick launch buttons driver a few days ago, according to the advice of an hp advisor, so any suggestions on how to get my fn key working.
My mute button stays red, even when the volume is on and i'm watching videos. This problem didn't exist until i downloaded the audio driver.
My print screen key doesn't work either, i got to know it when i was trying to print screen images for school work.
Thanks.

Woudl advise a BIOS upgrade when downgrading to Windows XP, the European BIOS driver for your version of notebook is;
[BIOS upgrade |http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=2&selSeries=178&selProduct=784&selSho rtMod=null&language=13&selOS=10&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=8&s electedLanguage=13&type=all&page=1&ID=65754&OSID=-1&driverLanguage=42]
When the BIOS has been installed, re-install the Hotkeys/Controls driver on the link below;
[Hotkeys/Controls driver |http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=2&selSeries=178&selProduct=784&selSho rtMod=null&language=13&selOS=10&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=8&s electedLanguage=13&type=all&page=1&ID=63996&OSID=1 0&driverLanguage=13]
Also would advise upgrading the common modules;
[common modules|http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory =2&selFamily=2&selSeries=178&selProduct=784&selSho rtMod=null&language=13&selOS=10&selType=all&yearup load=&monthupload=&dayupload=&useDate=null&mode=al lMachines&search=&action=search&macId=&country=8&s electedLanguage=13&type=all&page=1&ID=63941&OSID=1 0&driverLanguage=42]
Good luck and let me know if you get it solved using these recommendations

6 lines of red error msgs when opening an InfoPackage

When I double click an infoPackage to open it, get to a window titled as "Execute Repeat Request"? with the following 6 lines of red msgs in the sequence as below (see in between two dashed lines):
Delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV is incorrect in the monitor
A repeat needs to be requested
Data target 0BBP_CON still includes delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV
If the repeat is now loaded, then there could possibly be
duplicate data in the data targets
Request the repeat?
What could cause the problems and how to resolve them?
Thanks for everyone's input!

hey Paolo,
I checked the short dump, but it seems not helpful. See below in between two dashed lines for the short dump msg:
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     31.10.2005 at 00:02:12
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "DbSlExeModifyDB6( SQLExecute ): [IBM][CLI
Driver][DB2/AIX64] SQL0289N Unable to allocate new pages in table space
"QDW#ODSD". SQLSTATE=57011 row=261"
Internal call code.........: "[RSQL/INSR//BIC/B0000432000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP3ZBWN7YYJYC54GT20I6UDDJ2Z " or "GP3ZBWN7YYJYC54GT20I6UDDJ2Z "
"INSERT_ODS"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
Details regarding the conditions under which the error occurred
or which actions and input led to the error.
What could be the reason?
Thanks

My iTouch 1g wont finishing restoring & stays in recovery mode. How do i fix it?

My iTouch 1g wont finishing restoring & stays in recovery mode. How do i fix it?

- Any error messages?
- At what stage does the restore freeze? What is shown in the staus bar?

PE8 wont render, line stays red!

Similar Messages

Maybe you are looking for